Availability
Yagi Antenna Building Parts
DX Engineering Flanged Feedpoint Connector Mounting Brackets
DX Engineering Flanged Feedpoint Connector Mounting Brackets give the user flexibility for securing the Flanged Feedpoint Connector. This unique piece of drilled and bent aluminum allows for mounting the FFPC and attaching these bracket to a boom, mast or other surface in different positions, facing different directions, with a variety of clamps. Stainless Steel hardware is included to secure the bracket to the Flanged Feedpoint Connector assembly. An optional DX Engineering Studded Band Clamp may be used on tubing instead of drilling into the mechanical structure of the antenna, mast or tower.
Not Yet Reviewed
$14.49
DX Engineering BEB-3 Insulated Boom-to-Element Brackets
DX Engineering BEB-3 Insulated Boom-to-Element Brackets now provide a convenient, low cost method for insulated elements to be attached to smaller booms when building Yagi, LPDA or other antennas. BEB-3 Brackets are an insulated plate made from an extremely strong polymer which is highly UV resistant. They are pre-drilled to accept DX Engineering Saddle Clamps. So, they are ready with two pairs of holes to mount 0.750 in. tubing for the center portion of a tapered, insulated antenna element, with two SAD-075A Saddle Clamps on one side of the plate. Of the other three pairs of holes, only one pair is used for the appropriate saddle clamp on the other side of the plate, to place the assembly onto an aluminum tubing or fiberglass boom measuring 1.250 in., 1.500 in., or 1.750 in. outside diameter. BEB-3 Brackets may also be used to mount a small beam with a 0.750 in. boom to a mast with a 1.250 in., 1.500 in., or 1.750 in. outside diameter, using DX Engineering Saddle Clamps. BEB-3 Insulated Boom-to-Element Brackets are suitable to build and mount antennas for 15, 12, 10, 6 and 2 meters with reasonable wind survivability. The described assemblies are also great for making a single-band rotatable dipole. For larger antennas please see our BEB-2 Insulated Boom-to-Element Bracket. When using a BEB-3 to build a split driven element for a Yagi or a rotatable dipole, use the SEI-1 Split-Element Insert to provide the proper 0.750 in. element tubing support. The DX Engineering BEB-3 Insulated Boom-to-Element Brackets separate and insulate the element from the boom thereby requiring no element length corrections. You can cut the tubing just like the antenna design program (AO, EZNEC, etc.) tells you and it will work as well as your computer model. You may also want to use our HMS-2P Hairpin Driven Element Matching System and our Baluns to complete your Dream Beam. Don't forget to purchase a copy of DX Engineering's Yagi Mechanical to make sure your elements have the desired wind survivability. Please see our article about "How to Build a Yagi Antenna That Works". You can build a very affordable, high performance Yagi antenna with the DX Engineering BEB-3 Insulated Boom-to-Element Brackets.
( 4 )
$15.99
DX Engineering ATBB-2 Boom Brackets
DX Engineering ATBB-2 Boom Brackets are high strength aluminum boom brackets, with a stainless steel bolt and nylon insert lock nut, designed for 2 in. booms. These boom brackets are designed to attach near the ends of a 2 in. boom. They allow for the attachment of truss support cables from these brackets to the truss bracket, to support a long boom Yagi beam antenna.
( 4 )
$14.99
DX Engineering UMP-2 Universal Mounting Plates
DX Engineering UMP-2 Universal Mounting Plates offer incredible mounting versatility. Fabricated from 0.250 in. 6061-T6 polished aluminum, UMP-2 plates are pre-drilled to use the DX Engineering CAVS-2P or SSVC-2P 2.000 in. V-Bolt Saddle Clamps and SAD-075A 0.750 in. and SAD-050A 0.500 in. U-Bolt Saddle Clamps. So, you can use these plates on a myriad of projects that cover sizes from 1.000 in. through 2.000 in. The DXE-SAD-200A U-bolt Saddle Clamp may also be used, but only with 2 in O.D. tubing. With UMP-2 plates you can couple two different sizes of tubing, extend mounting pipes, attach to ground rods, mount light verticals, use a pair to attach a cross-arm to the side of a tower for antenna mounting, or mount a lightning rod to the top of a tower or mast. Depending on orientation and application, both sets of clamps may be mounted on the same side or on opposite sides of the plate, and the holes allow the pairs of clamps to be mounted parallel or perpendicular to the other for maximum flexibility! You can easily modify and customize these aluminum plates for your specific applications. See our other Antenna Building and Mounting Plates if your plans require 2.000 in. through 3.000 in. sizes and when rotational systems demand the maximum grip available from DX Engineering's larger U-Bolt Saddle Clamps. DX Engineering UMP-2 Universal Mounting Plates offer great versatility for your antenna project--and your wallet!
( 1 )
$18.29
DX Engineering ATBB-3 Boom Brackets
DX Engineering ATBB-3 Boom Brackets are high strength aluminum boom brackets, with a stainless steel bolt and nylon insert lock nut, designed for 3 in. booms. These boom brackets are designed to attach near the ends of a 3 in. boom. They allow for the attachment of truss support cables from these brackets to the truss bracket, to support a long boom Yagi beam antenna.
Not Yet Reviewed
$12.99
DX Engineering UMP-1 Universal Mounting Plates
DX Engineering UMP-1 Universal Mounting Plates offer incredible mounting versatility. Fabricated from 0.250 in. 6061-T651 polished aluminum, UMP-1 plates are pre-drilled to use the DX Engineering CAVS-1P 1.750 in. V-Bolt Saddle Clamps and SAD-075A 0.750 in. and SAD-050A 0.500 in. U-Bolt Saddle Clamps. So, you can use these plates on a myriad of projects that cover sizes from 0.500 in. through 1.750 in. With UMP-1 plates you can couple two different sizes of tubing, extend mounting pipes, attach to ground rods, mount light verticals, use a pair to attach a cross-arm to the side of a tower for antenna mounting, or mount a lightning rod to the top of a tower or mast. Depending on orientation and application, both sets of clamps may be mounted on the same side or on opposite sides of the plate, and the holes allow the pairs of clamps to be mounted parallel or perpendicular to the other for maximum flexibility! You can easily modify and customize these aluminum plates for your specific applications. See our other Antenna Building and Mounting Plates if your plans require 2.000 in. through 3.000 in. sizes and when rotational systems demand the maximum grip available from DX Engineering's larger U-Bolt Saddle Clamps. DX Engineering UMP-1 Universal Mounting Plates offer great versatility for your antenna project--and your wallet!
( 1 )
$19.59