Antennas
Availability
Antennas for HAM Radio
Monoband or multi-band. Vertical or directional. Base or mobile. Transmitting or receiving. No matter what type of antenna or antenna system you need, you’ll find it...
Monoband or multi-band. Vertical or directional. Base or mobile. Transmitting or receiving. No matter what type of antenna or antenna system you need, you’ll find it at DX Engineering. Choose from a wide range of antenna types, including single-band, dual-band, multi-band, vertical, trap vertical, wire, Yagi, VHF/UHF and HF/VHF mobile, and more. DX Engineering receive antenna systems feature the best designs available for HF DXing, as well as for “AM DXing” on the MW Broadcast Band and for the Short Wave Listening bands (SWL). Maximize your signal and minimize noise with antenna accessories such as antenna switches, vertical...
Monoband or multi-band. Vertical or directional. Base or mobile. Transmitting or receiving. No matter what type of antenna or antenna system you need, you’ll find it at DX Engineering. Choose from a wide range of antenna types, including single-band, dual-band, multi-band, vertical, trap vertical, wire, Yagi, VHF/UHF and HF/VHF mobile, and more. DX Engineering receive antenna systems feature the best designs available for HF DXing, as well as for “AM DXing” on the MW Broadcast Band and for the Short Wave Listening bands (SWL). Maximize your signal and minimize noise with antenna accessories such as antenna switches, vertical add-on kits, variable phasing controllers, baluns, radial and tilt base plates, preamplifiers, and more. Fortify your existing antenna or build your own with high-quality brackets, clamps, tubing and supports from DX Engineering. Shop here for HAM radio antennas, antenna systems, and antenna components from the best: DX Engineering, Cushcraft, Hy-Gain, Hustler, COMTEK SYSTEMS, Diamond Antenna, and more!
United Microsystems BT-75/BOG Beverage-On-Ground Antenna Transformers
The United Microsystems BT-75/BOG Beverage-on-Ground (BOG) Antenna Transformers are specifically designed for Beverage-on-Ground receive antennas and is based on the proven BT-75 transformer used with elevated Beverage antennas. Because BOG antennas are installed directly on or just above the ground, they require no supports and can be significantly shorter than traditional Beverage antennas, making them a practical option where space is limited. BOG antennas typically exhibit lower impedance than elevated Beverage antennas. The BT-75/BOG is optimized to provide proper impedance matching between the antenna and 75-ohm RG-6 coaxial cable, improving performance compared to standard Beverage transformers. For correct operation, the far end of the antenna must be terminated with a 250 to 300-ohm resistive load. The United Microsystems RXT-270 termination resistor is recommended. Properly installed Beverage antennas are low-noise, receive-only antennas that provide excellent rejection of signals and noise from the undesired direction. Due to the lower velocity factor of radio waves near the ground, a BOG antenna can often deliver a radiation pattern similar to an elevated Beverage antenna of roughly twice the length, though with reduced signal strength. A BOG antenna as short as 150 to 200 feet can provide effective receive performance, although a preamplifier may be beneficial in some installations. The BT-75/BOG is designed for use with 75-ohm RG-6 coaxial cable. Originally developed for television applications, RG-6 offers low loss at VHF and UHF frequencies, resulting in extremely low loss on the 160, 80, and 40-meter bands. Its availability and low cost make it a popular choice for low-band receive antenna feed lines. The transformer is housed in a NEMA-rated enclosure with stainless steel hardware for long-term outdoor durability. A built-in gas discharge tube across the antenna terminals helps protect the transformer from nearby lightning-induced surges, although it will not provide protection against direct or very close lightning strikes.
Not Yet Reviewed
$37.95
DX Engineering AVA-3 Active Matching Units
DX Engineering AVA-3 Active Matching Units are state-of-the-art broadband receive RF operational amplifiers that achieve unparalleled weak signal reception across the radio frequency range from 40 kHz* to 30 MHz. They work as a high impedance buffer between a short antenna element of 6 to 24 feet and an economical 75 ohm feedline. The AVA-3 and a short element are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. The gain adjustable AVA-3 is the sole upgrade and drop-in replacement for all discontinued receive array element amplifiers including Hi-Z Antennas AMP, PLUS6-AMP, AMP-V2 and AMP-PLUS-V2 as well as DXE-AVA-2 and AVA-1. The DXE-AVA-3 Active Matching Unit is the heart of the new line of DX Engineering Receive Short Element Active Vertical Antennas, DXE-RSEAV-1. Compared to large antennas, this amplified short element method dramatically improves signal-to-noise performance for excellent VLF, LF and HF weak signal reception. Click or tap the title of the listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation. The AVA-3 Active Matching Unit provides these features and benefits: • Ultimate frequency coverage of 40 kHz* to 30 MHz for VLF through HF (including the 2200m and 630m Amateur bands) • High Third Order Intercept (TOI) Performance +39dBm for superior strong signal handling equal to top transceivers • Consistent unit to unit gain for greatly improved array performance • Virtually Flat Gain (+/-0.4 dBm) across the entire frequency range • Internally settable gain (default -6, 0, or +6 dBm) for different ambient noise locations and element sizes • Direct DC via second F connector – internal settable choice for separate DC and RF coaxial cables for best performance, or standard Bias Tee DC on the RF coax • Each DXE-AVA-3 Active Matching Unit operates on 12 -15 VDC at 25mA • Element is grounded when power is removed • 75 ohm F connectors support field serviceable RG-6 Quad Shield suitable up to 1,000 feet for VLF through HF *Frequency coverage below 200 kHz requires Direct DC on a separate DC only coaxial cable. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace and upgrade all the element amplifiers in the array with fully compatible DXE-AVA-3 units.
( 6 )
$139.99
COMTEK Current Feedline Chokes
The updated COMTEK CFC-50A 50 ohm Feedline Chokes consist of 75 heavy-duty mix-31 RF choke beads on a length of RG400 PTFE coax terminated at both ends with silver-plated PTFE PL-259/UHF male connectors and the correct length of heat-shrink tubing. COMTEK Current Feedline Chokes ensure that stray RF does not flow on the outside shield of your feedlines. They are typically installed at the antenna feedpoint connection. They may also be used where a long run of feedline leaves a remote antenna switch or a tower. They are also very effective at the shack end of a long run of on-the-ground or above-ground coaxial feedline, to block unwanted RF signals and noise picked up on the shield. These chokes provide excellent common mode impedance and handle up to 5 kW from 1.8 to 54 MHz. These chokes are assembled except for the tubing needs to be installed and heat-shrinked after the choke is positioned as it will be installed.
( 14 )
$131.49
Butternut Antenna Replacement Parts
Butternut Antenna Replacement Parts enable you to keep your Butternut antennas performing at their peak. They offer their capacitors, coaxial matches, coils, and many other parts. Whether used for maintenance or for repairs due to unfortunate damage, Butternut can provide the replacement antenna parts that you need. Butternut high performance antennas have been available for decades. Maintain your antenna with genuine Butternut replacement parts from DX Engineering!
( 92 )
$95.99
—
$139.99
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables
Hi-Z® Antennas DL-4 V2 Long and Short Delay Cables are essential components for the Hi-Z 4 Element V2 4 Square and Hi-Z 8 Element V2 Multi-Band 8 Circle Receive Array Systems. These are the high quality RG-6U coaxial cables that are precision tuned by DX Engineering and terminated with compression-style weather resistant male F connectors. These Hi-Z DL4 V2 Delay Cables must be selected and purchased separately, depending upon the desired array band coverage and corresponding size of the array, detailed below. Each are permanently connected to the 4 Square or 8 Circle Phase Controller "Long Delay" and "Short Delay" female F connectors upon array installation. SMALL ARRAY dimensions for maximized multi-band reception require the selection of one HIZ-DL-4-60-85L (Long) and one HIZ-DL-4-60-85S (Short), as recommended by Hi-Z for: * 4 Square Array with element side spacing of 60 ft. * 8 Circle Array with a diameter of 85 ft. Overall excellent cardioid patterns are achieved for enhanced, low noise reception on all three low band bands--160, 80, and 40 meters with very good receiving results on 30 meters as well. LARGE ARRAYS that are dedicated for ONLY 160 and 80 meters, one HIZ-DL-4-80-113L and one HIZ-DL-4-80-113S are for: * 4 Square Array with element side spacing of 80 ft. * 8 Circle Array with a diameter of 113 ft. Large array spacing and longer delay cable allows the user to manipulate the achieved patterns and the resulting Receive Directivity Factor (RDF) for their desired band coverage optimization. This also requires the change of four jumpers inside the respective phase controller. See the array phase controller instructions for details on jumper settings for alternative delay lines, patterns and performance.
Not Yet Reviewed
$33.99
—
$48.99
Unified Microsystems BevFlex-4X and BevFlex-4X/Q Reversible Receive Antenna System
Unified Microsystems BevFlex-4X Reversible Receive Antenna System is a very versatile two-direction low band receiving antenna. This is the updated and improved version of the W8GNM revolutionary design that uses only low cost, low loss RG-6 for the elements and the feedline of a Reversible Beverage antenna or Reversible Beverage on Ground antenna. Plus, it uses specially designed transformer units that allow the feedpoint unit to be placed anywhere along the length of the Reversible Beverage or BOG, instead of only at one end or the other. Like for other Beverage antennas, the Elevated Beverage or a Beverage on Ground (BOG), the performance of the reversible BevFlex-4X system depends upon the length of the user supplied RG-6 coax for the antenna element. Also, the versatile BevFlex-4X components may be used to create a two-direction version of any one of these antennas, using a much shorter length of wire for the receiving element: * EWE * Flag * VE3DO Loop BevFlex-4X Systems consist of four components; one Feed Unit, two Terminator Units and one Control Switch Unit. The Feed and Terminal Units are house in NEMA rated enclosures and use stainless steel hardware for maximum weather protection. Do you need enhanced reception in four directions? The BevFlex-4X/Q combines two sets of Terminator and Feed Units with the RAS-4 remote antenna switch to let you hear better in all four quadrants. The BevFlex-4X antennas can be any mix of Beverage, BOG, Flag, EWE, or VE3DO. The included RAS-4 Remote Antenna Switch only requires a single coax and four wire control cable to the shack. NOTE: An in-shack four direction switch control box is not included. Choose a control console from DX Engineering, EA4TX and others, or build your own. Just add RG-6 coax and ground rods! Click "More Details" and the Brochure link at the Documentation tab to see pdf diagrams of all of these two and four-direction BevFlex receive antenna system connections. Depending upon the real estate you have available, the FAQ chart will help you choose the Unified Microsystems BevFlex-4X or BevFlex-4X/Q configuration that fits your property and your low band reception needs!
( 15 )
$349.99
—
$649.95
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas
InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are an exciting development for the fascinating hobby of long distance (DX) reception of free, over-the-air broadcast FM radio. The OP-DES Yagi directional antennas are specially designed for better gain, great front-to-back and patterns with fewer side lobes, to dramatically improve your reception experience by helping your tuner or receiver achieve a new level of performance. For FM DX enthusiasts who own great FM Tuners and Receivers, pulling in new distant stations at full quieting is thrilling. Capturing a weak station while rejecting an on-channel stronger station can be especially gratifying. Hearing distant fringe and local stations at full fidelity without noise is the ultimate goal for FM audiophiles as well as FM DXers. Even HD Radio enthusiasts can increase their channel count with full sound quality and fewer dropouts. One of the distinctive design features of the OP-DES Yagi Antennas is a low feedpoint impedance that allows either 50 ohm or 75 ohm coaxial cable to be connected directly to the driven element, eliminating the losses of a transformer balun. With several boom lengths available, for the FM enthusiast on a budget, for the casual listener with a treasured vintage receiver, and for the most discerning FM Tuner audiophile, best-ever reception is possible with an InnovAntenna FM Broadcast OP-DES Yagi. InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antennas are available as: IVA-18484-0108 Compact and Space-Saving 8 element, 6.5 ft. boom, 9 to 10 dBi gain, typ. 24 dB f/b IVA-18484-0145 Cost-Effective Performance 11 element 12 ft. boom, 9.8 to 12.6 dBi gain, typ. 25 dB f/b IVA-18484-0110 High Performance 14 element, 18 ft. trussed boom, 10-13 dBi gain, 20 to 42 dB f/b IVA-18484-0112 Ultimate Performance 18-element, 24 ft. trussed boom, 11-14 dBi gain, 20 to 44 dB f/b Choose the InnovAntennas FM Broadcast 88-108 MHz OP-DES Yagi Antenna that is right for you. Immerse yourself in a world of music, news and entertainment and discover a clarity and fidelity that you never heard before on your FM Tuner or Stereo Receiver.
( 2 )
$299.99
—
$735.99
DX Engineering Receive Feedline Transformers
DX Engineering Receive Feedline Transformers are designed to match your receive antenna 75 ohm output impedance to the nominal 50 ohm input impedance of most receivers. These transformers may be used in almost any receiving application that requires a 75 ohm Type F connection to a 50 ohm BNC connector. These transformers have very low loss (<0.3 dB) and very wide bandwidth, 100 kHz to 30 MHz! Matching the receive antenna or array to the receiver ensures the best possible performance as a result of a system impedance match. *Important! - These Feedline Transformers are Intended to be used on an RF ONLY coax and should NOT be used for power.
( 1 )
$55.99
DX Engineering Reversible Beverage Systems
DX Engineering Reversible Beverage Systems basically allow two Beverage antennas to be switched to receive in opposite directions while sharing the same physical space. DXE-RBSA-1P Reversible Beverage Systems antennas provide two opposite "end-fire" directional patterns with excellent front-to-rear directivity and superior signal-to-noise ratio as compared to transmitting antennas. Dramatically improved long distance weak signal results may be achieved on MW and the 160, 80 and 40 meter bands, including shortwave bands, with receive-only Beverage antennas using wires that are typically only 350 to 800 feet long, depending upon the band of interest. The two-direction DXE-RBSA-1P Reversible Beverage Systems offer a space and installation advantage because two opposite single-wire Beverage antennas would require twice the length. DX Engineering Reversible Beverage Systems are immune to the strong signal overload and core saturation common in multi-transmitter contesting environments and are used by winning contest stations and low-band DXers around the world. These Reversible Beverage antennas have two "F" connectors; one "Away" port for the default end-fire receiving pattern off the end of the wire, and one "Toward" port for the opposite direction. The standard configuration of these systems has the "Toward" port terminated (75-ohm termination included), so both antennas share a common feedline. Applying a negative 10 to 18V DC to the feedline switches the system between the two antenna ports for reception in opposite directions. For simultaneous reception from opposing directions, each of the two feedlines can be run to separate receivers, with the termination load not used. You can build a 4-direction receive antenna system with two DXE-RBSA-1P Reversible Beverage Systems and one DX Engineering RLS-2 Two-Port Receiving Switch that also requires only one feedline! The optional DX Engineering Feedline Voltage Coupler, model DXE-FVC-1 is highly recommended to provide all of the required feedline voltage injection. Plus, the optional DXE-EC-4 BCD Control Console completes the system for four-direction switching right in the shack. DX Engineering Reversible Beverage Systems are optimized to use our optional 450 ohm ladder line for the antenna element. We strongly recommend using that type of "window line" because the consistent spacing of the antenna wires will produce the best operational results. However, the RBS will work with any 300-600 ohm 2-wire line. For best feed line results, DX Engineering highly recommends using our high quality flooded or quad-shielded 75-ohm coax with F-type compression connectors to ensure a weatherproof installation. Additional features include: * Broad operating range, 0.2 to 30 MHz * Fully isolated grounds prevent common-made noise and unwanted signals * 75 ohm design enables the use of high quality, low cost cable and connectors * RF shielded housing used for isolation and improved life * Directional Switching Voltage: nominal 12V AC or negative 12V DC, feedline injected * Directional Switching Current: less than 80 mA * Antenna impedance: 300-600 ohm (450 ohm recommended) * Feedline impedance: 50-75 ohm (75 ohm recommended) * RBSA-1FP Feed Point unit dimensions: 5.5 in. width x 3.5 in. depth x 1.5 in. height * RBS-1RT Reflection Transformer unit dimensions: 2.125 in. width x 2.125 in. depth x 1.125 in. height Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Reversible Beverage Systems offer the best DX reception and flexibility in high performance two-direction wire Beverage receive antennas. Get yours set up soon!
( 3 )
$335.98
REZ Antenna Systems XFORM 4:1 UNUN
The REZ Antenna Systems XFORM 4:1 UNUN is a modular impedance-matching system designed for the Scout system, expanding its capabilities beyond traditional quarter-wave verticals and half-wave dipoles. It integrates seamlessly with the Scout XF base and supports legacy Scout bases via a jumper connection. The XFORM enables over 30 potential antenna deployment options when combined with future 9:1 and 49:1 transformer modules, which are currently in development. Built for durability, the XFORM features CNC-machined 6061 aluminum, an acetal polymer body, and stainless steel hardware. Its gasket-sealed design ensures reliable performance in harsh weather conditions. The unit handles up to 200 watts PEP SSB and 75 watts digital (50% duty cycle) and measures 5.5 inches in length with a maximum diameter of 2.5 inches. Each core is precisely wound and tested for thermal stability and minimal insertion loss, delivering efficient signal transfer and cooler operation underload. The XFORM requires a Scout base for use, making it an essential upgrade for operators seeking maximum versatility and performance in portable HF antenna systems.
( 3 )
$189.95
Unified Microsystems Beverage Antenna Transformers
Unified Microsystems Beverage Antenna Transformers are now available. UMS transformers are built with stainless steel hardware and an F-Type coaxial connector. These transformers are fully enclosed for ultimate protection from the elements. They are corrosion resistant and sealed for many years of trouble-free use. Unified Microsystems Beverage transformers should be used with 75 ohm cable, typically RG-6, 6UF, F-6, or equivalent. H. H. Beverage described his "Wave Antenna" (the first Beverage) in the November, 1922 QST Magazine. Beverages are classic designs with well-defined characteristics and time-proven performance. Beverage antennas are among the simplest of high signal-to-noise-ratio antennas to construct. Make Unified Microsystems Beverage Antenna Transformers part of your receive-antenna system. Get yours from DX Engineering today!
( 10 )
$37.95
DX Engineering Receive Feedline Voltage Injectors
DX Engineering Feedline Voltage Injectors, DXE-FVI-1, are high-quality bias-tee devices that place direct current onto a receive antenna system's coaxial cable while preventing DC from reaching the Radio port. These FVI-1 voltage injectors are used to power active accessory devices, such remote relays, switching systems, and preamplifiers. These are the original equipment FVI-1 units provided with single DX Engineering Active Receive Vertical antenna models. Voltage is applied via the 2.1mm power connector to the receive antenna feedline F connector. The RCA phono jack connects to the receiver input with that DC voltage blocked, while passing RF from 100 kHz to 30 MHz. Various RCA phono plug adapters for different RF cable connectors are available in Suggested Parts. Two DXE-FVI-1 feedline voltage injectors may be connected at opposite ends of a feedline to provide DC voltage on the transmission line for your own custom application, keeping the input and output RF devices isolated from the voltage. The included 120V AC 60 Hz wall transformer power supply may be connected to the 2.1mm power connector may to place approximately +12 volts DC on the coaxial cable center conductor, with the coaxial cable shield used as the negative ground return. A different station power supply, 1-16 VDC, may be used with an in-line, 1 Ampere, fast-blow fuse for various devices. DX Engineering feedline voltage injectors are ready for your "DC power on the coax" needs! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you need to inject a DC voltage onto a 75 ohm coaxial cable used for receiving, remember the DX Engineering Feedline Voltage Injector!
Not Yet Reviewed
$99.99
Unified Microsystems RAS-4 Receive Antenna Switch
Unified Microsystems RAS-4 Receive Antenna Switch is an outdoor capable remote relay unit that allows the operator to select up to four antennas. Receive only antennas are critical for success on the low bands. Due to the wavelengths of the low bands, these antennas cannot be rotated. Several very effective receive only antennas are mono-directional or bi-directional, including Beverage, Reversible Beverage, Beverage on the Ground (BOG), Reversible Beverage on the Ground (RBOG) and many others,. Therefore, a high quality, low noise four port receive antenna switch is required to cover all of the directions with multiple antennas. Common mode noise pick up can ruin the performance of receive antenna systems, so the RAS-4 isolates both the center conductor and shield of unselected ports. An internal bifilar ferrite choke further reduces common mode currents. This unit features female F connectors for RG6U coax with male F connectors, the standard field-serviceable coaxial cable assemblies for receive antenna systems. A very important requirement for dual feedline Reversible Beverage and RBOG antennas is provided by the RAS-4. By default, unselected ports are terminated for 75 ohms. The user can change to 50 ohm, open circuit, or center conductor-shield short by soldering wire jumpers. The RAS-4 is housed in a NEMA rated enclosure with a gasket lid. A cable gland seals the control cable entry. The internal circuit board has a conformal coating for additional protection. The RAS-4 can be mounted outdoors, with the enclosure flanges or with the included L bracket for mounting to a pole or post. The RAS-4 Receive Antenna Switch is a receive-only relay unit that cannot be used for transmitting antennas. The required in-shack control console switch is not included. The RAS-4 will work with a commercial or a simple home brewed, positive 12V One-of-Four switch. Choose from DX Engineering, EA4TX and others for manual or automated switching. Unified Microsystems RAS-4 Receive Antenna Switch Specifications Antenna Selection: 4 receive antennas to 1 main feedline Dimensions: Approx. 4.5 x 3.5 x 3.25 in. (11.4 x 8.9 x 8.3 cm), not including the bracket. Connector type: F (5 total) Unselected port termination: 75 ohm default; 50 ohm; open; shorted. Wire jumper selectable VSWR: < 1.5:1 from 100 kHz to 20 MHz Insertion loss: < 0.4dB from 100 kHz to 20 MHz Port to Port Isolation: > 45dB from 100 kHz to 20 MHz Control Cable: 3 wire plus ground (4 total conductors), Not included Switch Controller: 12 to 14 Vdc, Not included
( 2 )
$124.95
DX Engineering NCC-2 Receive Antenna Phasing Systems
Imagine adjusting the controls to knock out strong interfering stations or noise—and then being able to copy and log that weak DX station. By successfully combining the right antennas with the advanced phasing capabilities of the NCC-2, this is the operating thrill that every radio enthusiast can enjoy, again and again! DX Engineering NCC-2 Receive Antenna Phasing Systems are variable phasing controllers that combine the 300 kHz- 30MHz received signals from one transmit antenna and one receive antenna, or from two dedicated receive antennas. Combining signals from two stationary antennas physically spaced 1/10 to 1/2 wavelength apart creates an array pattern with signal peaks and dips called nulls. Adjusting the NCC-2 Phase and Balance controls have the effect of electronically rotating or steering that pattern. Steering the null direction to significantly weaken a local or distant interfering signal or noise is known as "Noise Cancelling." This "Noise Cancelling Controller" (NCC-2) can dramatically enhance the reception of weak signals from non-null directions. This "reverse-beam" capability on radio frequencies AM Broadcast through HF can provide amazing benefits for many types of AM DX and SWL receiving and ham radio operating. Work new DX, hear the weak station in casual regional conversations, snag the rare multiplier in contests and hear beyond the noise and interference in dire circumstances. DX Engineering NCC-2 Phasing Systems now feature the built-in RTR Receive-Transmit Interface relay system that expands the exciting benefits of antenna phasing for interference reduction in two ways: * First, the NCC-2 can combine signals from the HF transmit antenna and a separate receive antenna to effectively notch-out strong stations or noise. Almost any Amateur can now enjoy the benefits of antenna phasing and noise-nulling, even those with space limitations for separating the receiving and transmitting antennas. * Second, the user of any standard HF transceiver that lacks a separate receive antenna input can have enhanced reception of noise and signal nulling with the DXE-NCC-2 and two antennas. Rear panel SO-239, F and BNC connectors make the NCC-2 extremely versatile and easy to connect to almost any receiver or HF transceiver up to 200 watts. Redesigned with plug-in modular circuit board sockets, the NCC-2 includes one switched and powered internal slot and two passive internal slots per channel to accommodate these new options: * DXE-RPA-2-PM Receive Preamplifier Plug-In Modules (powered): one per channel for low-signal passive antennas with poor ground conditions * DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module (passive): Front-end protection for the NCC-2 and the receiver * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-In Module (passive): to match 75 ohm RX ANT feedlines to NCC-2 50 ohm internal impedance * NCC-2 Receive Filter Sets (passive, non-switchable): High Pass, Band Pass and Low Pass Filters for 160, 80, 40 meters typically in stock, with other band filters available individually by special order. DX Engineering NCC-2 Receive Antenna Phasing Systems offer these new additional benefits: * Multi-Color Status Indicating LEDs for Power, RTR Mode and Preamp Power CH A and CH B * New Radio Key Line Input with RX Enable Output-RTR Failsafe to prevent RF damage to NCC-2 and RX equipment * New ACC Key Line Output RCA female 'ground on transmit' pass-through for Amplifier or Accessory * New screw-on 2.1mm DC connector to prevent accidental power cable pull-out * Operates on +13.8VDC @ 2A input to power the NCC-2 and internally jumper set Bias Tee on each RX ANT ports for coax fed Active Verticals and other accessories. Offering new and experienced radio enthusiasts the next level of reception enhancements, DX Engineering model NCC-2 Receive Antenna Phasing Systems in use around the world!
( 19 )
$955.99
DX Engineering Receive Short Element Active Vertical Antennas
DX Engineering Receive Short Element Active Vertical Antennas (the RSEAV Antennas) offer excellent low noise radio frequency reception from 40 kHz to 30 MHz. Better receiving performance than full-size transmit antennas and other active makes the DXE-RSEAV-1 the best choice on the market for VLF through HF reception, including long-distance AM broadcast, Medium Wave and Shortwave (SWL), and new low-frequency Amateur bands, DXing, contesting, and everyday HF operations. Click on a listed product title and Scroll Down to see additional important information. A complete product description appears below the Specifications Overview. Instruction manual links appear in the Documentation section. The sleek and stealthy DXE-RSEAV-1 includes a high-quality three-section 8.5 ft. (2.6m) aluminum tubing whip, insulated mounting plate and the completely new DXE-AVA-3 Active Matching Unit. Its state-of-the-art broadband operational amplifier design works as a high-impedance buffer between the short antenna element and RG6U 75-ohm coax. When installed in the appropriate location, RSEAV antennas provide significantly better weak signal reception than other active receive antennas and full-size transmit-capable antennas, with substantially reduced noise and lower spurious signal interference. Receive Short Element Active Vertical Antennas are intended to be mounted on a ground rod at ground level in a clear area away from all metal, towers and other antennas. They are sold individually (DXE-RSEAV-1), or with a bias tee (DXE-RSEAV-1FVI) and DXE-RSEAV-1 Receive Short Element Active Verticals set a new standard for "Active Receive Vertical Antennas" replacing legacy DXE-ARAV-3, ARAV-2, ARAV-1 and AL-24 versions. Use multiple DXE-RSEAV-1 for all 4 and 8 element DX Engineering Receive Arrays – all 3, 4 and 8 element Hi-Z Antennas Arrays – and 2 element receive arrays with DXE-NCC-2 and NCC-1 Variable Phasing Controllers. The DXE-RSEAV-1 is designed to be a very low-gain, low-noise antenna for greatly improved signal-to-noise performance over a very wide range of frequencies. In a proper single or multi-element array installation, this Receive Vertical antenna will attenuate high-angle skywave signals, which is the goal for a low band DXing receive antenna. Low-angle, long-range DX signals are easier to copy with a good radio and DX Engineering Receive Short Element Active Vertical Antennas. Please Note: To achieve the expected reception pattern, multi-element phased arrays depend upon identical gain and phase response from each element. Every individual element amplifier, its grounding, and even its feedline characteristics and length, must be identical to the others in the array. Therefore, when unrepairable failures occur, it is essential to replace or upgrade all the elements in the array with identical, fully compatible DXE-RSEAV-1 antennas or DXE-AVA-3 units.
( 4 )
$249.99
—
$1,999.92
DX Engineering RTR-2 Modular Receive-Transmit Interfaces
DX Engineering RTR-2 Modular Receive-Transmit Interfaces provide the easiest and safest method for connecting a dedicated receive antenna to an HF transceiver that does not have a separate receive antenna input. Placed inline with the transceiver's antenna connector, the RTR-2 does the job of a 200 watt T/R relay using the amplifier keying line for failsafe protection, so your transmitted energy cannot go to the receive antenna. Three internal Plug-in Module option slots provide added features and protection: * DXE-RPA-2-PM Receive Preamplifier Plug-in Module * DXE-TRI-PM Transmit Receive Interrupter Plug-In Module * DXE-IT-PM 75 to 50 ohm Impedance Transformer Plug-in Module DX Engineering RTR-2 Modular Receive-Transmit Interfaces allow the standard transceiver owner to enjoy the advantages of separate receive antennas. For the unswitched receive antenna (RX ANT) port on expensive transceivers, the RTR-2 interface also adds inexpensive failsafe protection. The receive antenna line can be opened or grounded with the optional DXE-TRI-PM Interrupter plug-in module. The RTR-2 is a very useful device for many applications, including: * Connection of external receiving antennas to transceivers lacking external antenna ports * T-R antenna switch for older equipment using separate transmitters and receivers * Interfacing antennas to older phasing or noise cancelling systems * Addition of a switchable receive preamplifier to any transceiver or transmitter and receiver combination * Excellent failsafe receiver protection for close-spaced transmit and receive antennas, without performance degradation of diode circuits of other devices. RTR-2 units feature a unique, failsafe connection method that prevents the hot switching and timing errors that are common on other transmit/receive relays. RTR-2 interfaces switch fast enough for partial break-in CW operation. There are many simple applications for the new RTR-2 and now internal modules can add dramatically improved reception of those really weak signals on the crowded HF bands! DX Engineering RTR-2 Modular Receive-Transmit Interfaces enable operators to enjoy improved reception with any low noise receiving antenna system. This shielded enclosure relay system provides a safe method of connecting a receive antenna, such as a Beverage, Active Receive system, or other receiving accessories to your radio. Major features that make the DX Engineering RTR-2 Receive Antenna Interfaces your best choice for a receive T/R system device: * New Status Indicating Color-changing LEDs * Three internal slots for new DX Engineering modules * New Key Line Out connector for Amplifier * New internal jumper for placing DC on the Receive Antenna feedline for Active or Loop receive antennas * Attractive and heavy stainless steel enclosure * 200 watts RF switching capability * Supports CW partial break-in * Main transmit antenna connector is SO-239 (UHF female) * Radio RF connector is SO-239 (UHF female) * Receive antenna input is 75 ohm F connector * Receive outputs are standard 75 ohm Type F connectors * Inputs are 50 ohm BNC or 75 ohm F (Optional transformer module available) * Safe switching--transmit antenna is always connected to transceiver on power-off * Hot switching lockout--disables receive antenna during transmit mode (Optional DXE-TRI-PM can be set to short the RX ANT line) * Versatile--allows inclusion of Optional RF preamplifiers and other plug-in modules * Simple 13.8 Vdc input for all operations An indispensable accessory for the DX enthusiast and useful for any Amateur's shack, DX Engineering RTR-2 Modular Receive-Transmit Interfaces can help you expand and improve your station's antenna connections and the protection of your equipment.
( 12 )
$375.99
DX Engineering RPA-2 Modular Receive Preamplifiers
DX Engineering RPA-2 Modular Receive Preamplifiers are newly designed versions of the RPA-1 with internal slots for accessory modules. They accommodate the addition of the one optional plug-in module, such as the 75 to 50 ohm Impedance Transformer Module, or the Receiver Guard 5000HD Plug-In Module, or the DX Engineering Clifton Laboratories Z10020 AM Band Filter Module. DXE-RPA-2 preamps have very low internal noise and are optimized for the 300 kHz to 35 MHz range. They help you hear the weakest signals without artificially raising the noise. Meticulous craftsmanship and durable, robust components allow these preamplifiers to withstand high signal levels while providing superior dynamic range and third-order intercept performance that equals or exceeds most receiver and transceiver front-ends. RPA-2 Receive Preamplifiers have key features added, as requested by our tech-oriented customers and enthusiasts: - Internal slot accommodates the optional 75 to 50 ohm Impedance Transformer Module to accomplish typical receive antenna feedline to equipment transitions without losses -Also allows direct connection to 50 ohm receive antenna feedline BNC connectors with no transformer required - Internal slot for DXE-RG5000HD-PM Receiver Guard 5000HD Plug-In Module – Front-end protection for the RPA-2 - Secure BNC female connectors and receive-system friendly F female connectors remain; both prevent accidental connection to transmitting devices with UHF connectors - A green LED indicates when DC power is present and the preamplifier circuit is engaged. - An ingenious positive-capture threaded-sleeve 2.1 mm power connector that ensures the DC power cannot be accidentally disconnected from the RPA-2. - Alternatively, a simple internal jumper change allows the RPA-2 to be powered by DC on the feedline While many other common preamplifiers suffer from harmonic distortion, RPA-2 Modular Receive Preamplifiers include our exclusive, advanced push-pull design that eliminates harmonic distortion. Their high quiescent current increases their ability to handle strong signals without distortion or overload. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 Vdc input. Please do not use a cheap wall transformer or noisy switching wall-wart to power these top-of-the-line preamplifiers. Indoor installation at the back of the radio is recommended for RPA-2. For those who want to place them in an enclosure at a receive antenna system, a handy internal jumper allows these new units to be powered on the coaxial cable. RPA-2 Receive Preamplifier Specifications: -Input and Output Connectors, female: BNC and F -Frequency Range: 300 kHz to 35 MHz -Gain: 16 dB, +/- 1.5 dB (over entire frequency range) -Output Third Order Intercept: 43 dBm -Noise Figure: 3.5 dB -One dB Compression Point: +26 dBm (400 mW output) -Dynamic Range, IM3: 110 dB or greater (500 Hz bandwidth) -Power Requirement: 12-18 Vdc, 140 mA max. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering RPA-2 Modular Receive Preamplifiers offer superior receiving results on crowded medium wave and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the advanced operational performance of DX Engineering Receive Preamplifiers. You will be able to pull in the weakest signals and snag that rare one, under the most difficult conditions, when you need it the most. Order your DX Engineering RPA-2 today!
( 14 )
$269.99
COMTEK ACB-4 Hybrid Four-Square Systems
COMTEK ACB-4 Hybrid Four-Square Systems are phased array Relay Units and Control Consoles that are affordable, simple to install, and easy to use. A four-square phased array consists of four mono-band resonant elements fed in phase relationships and power ratios that produce a directional cardioid pattern. Four-square arrays offer up to 5 dB of forward gain and fantastic front-to-back rejection over 25 dB! COMTEK ACB-4 Hybrid Four-Square Systems are designed for use with four quarter-wave ground mounted verticals, spaced one-quarter free space wavelength on the side of the square, with complete ground radial systems. Properly installed with quarter-wave 75-ohm phasing feedlines, the Four Square provides an excellent cardioid pattern that is steerable to the four directions of the corners of the four square array. Ground-mounted vertical arrays are easier to build and less costly to maintain than towers and beam antennas. Four-Square arrays are a practical solution for building a high performance directional HF antenna system, especially for Low Band DXing and contesting. Click the "More Details" link for more information on COMTEK ACB-4 Hybrid Four-Square Systems. COMTEK ACB-4 Hybrid Four-Square Relay Units are single-band phasing and relay devices. They are typically in stock for every major HF contesting Amateur band, and for 30 meters. The 60 meter band is available by special order. Four-Square arrays are single band specific, due to antenna spacing and phasing feedline lengths, for proper phasing and patterns. DX Engineering offers a full line of 75 ohm Phasing and 50 ohm feedline coaxial cables, control cables, antennas and accessories for your phased-array installation. The COMTEK ACB Series Hybrid Units also require a good 50 ohm, non-inductive dummy load. The electronically and mechanically improved COMTEK ACB-4 Hybrid Four-Square Systems now include the new COMTEK ACB-4A Four-Square Control Console. Specially designed to be useful as replacements for existing COMTEK ACB Hybrid four-square antenna systems, ACB-4A control consoles now feature a 13.8 VDC input to be easily integrated into all stations, including those that can be run on 12V DC emergency power. Their front panels have four-position rotary switches and four label pads and LEDs to indicate the array directional positions. The COMTEK ACB-4A Four-Square Control Console is ready to control your COMTEK Hybrid Array with low-cost three conductor control cable. COMTEK ACB-4 Hybrid Four-Square Systems include the Hybrid Relay Units with these features: * 2 kW rating for Amateur SSB and CW * 15 amp gold plated contact relays with dust covers * PTFE silver stranded wire over fiberglass tape-wound toroids * Balanced temperature, frequency, and voltage stable capacitors * Double-sided printed circuit board * MOVs for lightning surge protection with RF bypass caps * Brushed aluminum Z-chassis and cover with riveted seams * Mounting clamp included Regardless of the band you choose, COMTEK ACB-4 Hybrid Four-Square Systems from DX Engineering will help you rack up the contacts!
( 2 )
$569.98
—
$709.98
DX Engineering PS-3B PRO-STACK Three Antenna Phasing System
Dominate the airwaves with a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System. Achieve ultimate array control and performance with three identical Yagi or Log Periodic directional antennas or use the system for vertical antennas in a phased array. DXE-PS-3B Pro-Stack Units are frequency independent broadband phasing devices that operate with three antennas on any bands, from 160 through 10 meters. Select from twelve combinations of in-phase and out-of-phase for pattern and null steering that wins contests and snags the rarest DX! DXE-PS-3B-P PRO-STACK Three Antenna Phasing Systems consist of one DXE-PS-3B Relay Unit and one DXE-EC-PS3 Control Console with manual 12-position rotary switch. This advanced system requires only 9-conductor control cable and standard 50-ohm feedlines of equal lengths to each antenna. DXE-PS-3B Pro-Stack Broadband Three Antenna Phasing Systems offer these compelling features: - Power Handling up to 5 kW - Broad band coverage on 160-10 meters - RF Shielded Weatherproof Housing - unique protection - DXE-PS-3B has High-RF tolerant, silver - PTFE SO-239 (UHF female) connectors - DXE-PS-3BN-P are high-quality silver-PTFE Type N female connectors - DXE-PS-3BDIN has Amphenol Connex 7-16 DIN Panel Connectors - Proven high current DX Engineering RF Relays - Safe 12 volt DC relay operation - MOV surge protection on control lines - RoHS compliant assembly DXE-PS-3B Broadband Phasing Units provide the greatest flexibility for three identical antennas. This relay unit contains a broad-bandwidth high-power 2:1 impedance matching transformer. This eliminates common requirements of using mixtures of 75 ohm and 50 ohm phasing or delay cables for impedance matching. Feedlines to each antenna from the relay unit must be the same cable of the same length and match the antenna impedance. So all of them need only be as long as the longest, to reach from the antennas to the relay unit. While it is best to have feedlines of equal electrical lengths, there is no need to closely phase-match cables; cutting the antenna feedlines made from the same coax to equal physical lengths is sufficient. To ensure lowest SWR, impedance matching automatically changes when any antenna is disabled. By switching between antennas at different heights above ground and/or changing the phase relationship between multiple antennas. The old standard system in stacks was to activate or disable specific antennas in the stack to change pattern. However, with the Pro-Stack system, gain remains higher when all antennas are driven and phase is changed, plus this system allows phase inversion as well as the ability to switch any single antenna out of the array. Signals arrive at your antenna system from different azimuth directions and different elevation angles. Adding a stacking phasing system to a rotational array adds the ability to steer the pattern of the antenna array in two planes, azimuth and elevation, and to move the major lobe and nulls. This is accomplished by switching between three identical antennas that are properly spaced for phasing, as well as changing the phase relationship between the antennas to effect changes in the null positons of their elevation patterns. The greatest advantage of equipping your array with a DX Engineering Pro-Stack is the ability to move debilitating pattern nulls away from signal arrival angles. While gain makes a marginal improvement, moving a 20 to 40 dB null can make a phenomenal change in reception. So, the Pro-Stack can make the difference between a barely readable and a strong signal, thus providing the performance edge needed to work rare DX - and win contests. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Get a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System for your winning antenna array.
( 1 )
$1,101.98
—
$1,205.98
DX Engineering Receive Feedline Voltage Couplers
DX Engineering FVC-1 Feedline Voltage Couplers provide an interface between control switches and voltage-controlled antenna systems. These specialized controllable bias-tee devices place 0V DC, +12V DC, -12V DC, and 12V AC output voltages onto the receive antenna feedline via the 75 ohm F connector or onto a 2-conductor control line. These FVC-1 couplers function from below 500 kHz to 30 MHz and provide four selections for switching antenna array directions or changing from one array to another. These couplers were designed for use with; the DX Engineering receive-only four-square antenna systems, reversible Beverage antenna systems, and remote switches. DX Engineering switch control consoles may be connected directly to the BCD switch control input of FVC-1 couplers. Alternatively, you may use your own 12V DC voltage switching system or 1 of 4 grounding switches to control the coupler by resetting internal jumpers. The connection of the feedline voltage couplers to any radio receive antenna input is to be made using either the standard RCA phono or the F connector. This allows for the use of readily available RF-compatible RCA phono patch cords or a 75 ohm coaxial cable and connectors, which protects your receive system from an accidental connection to transmitting equipment. FVC-1 feedline voltage couplers have two LED indicators--red and green--which indicate the presence and polarity of the output control voltage selected. The LEDs may function as directional indicators that can be read at a convenient distance or they can aid in troubleshooting. Each of our DX Engineering FVC-1 Feedline Voltage Couplers comes with a heavy duty 120V AC wall transformer, which provides a safe 12V AC to operate your receive antenna system. Here are other exclusive features of FVC-1 voltage couplers: * Metal housing--superior shielding, rugged, and easy mounting * Convenient installation--mount anywhere in your shack * Rugged control connector - a reliable, solderless, and removable connector with screw conductor clamps * Internal thermal reset fuse offers full protection against accidental shorts Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Got antenna switching voltages? DX Engineering FVC-1 Feedline Voltage Couplers will solve many switching needs easily and economically!
( 1 )
$185.99
DX Engineering Reversible Beverage Antenna System Combos
DX Engineering Reversible Beverage Antenna System Combos allow two Beverage antennas to be switched to receive in opposite directions while sharing the same physical space. These exciting new reversible Beverage combos include DX Engineering's superb receive preamp! Dramatically improved weak signal results can be achieved on MW, BCB, 160, 80 and 40 meter bands and shortwave bands with receive-only Beverage wire antennas that are typically 350 to 800 feet long, depending upon the lowest band of interest. DX Engineering Reversible Beverage System Combos are immune to the strong signal overload and core saturation common in multi-transmitter contesting environments. Reversible Beverages have two antenna F connectors; one "Away" port for the default end-fire receiving pattern off the end of the wire, and one "Toward" port for the opposite direction. Applying a negative 10 to 18 V DC to the feedline switches the system between the two antenna ports for reception in opposite directions. You can build a 4-direction receive antenna system with two reversible Beverage systems and one DX Engineering RLS-2 Two-Port Receiving Switch that also requires only one feedline! The optional DX Engineering Feedline Voltage Coupler, model DXE-FVC-1 is highly recommended to provide all of the required feedline voltage injection. Plus, the optional DXE-EC-4 BCD Control Console completes the system for four-direction switching right in the shack. These RBS systems will work with any 300-600 ohm 2-wire line. For best low-loss low-noise results, use DX Engineering flooded or quad-shielded 75-ohm coax; with our F-type compression connectors to ensure a weatherproof installation. DX Engineering RPA-1 Receive Preamplifiers use RCA-type phono jacks and CATV Type-F female connectors for the input and output connections to prevent accidental connection to transmitting devices. RPA-1 Receive Preamplifiers feature a built-in relay that automatically bypasses the preamplifier circuit when DC power is removed. These high performance devices must be powered with a well filtered and regulated DC power supply and will offer maximum performance at 12 to 18 V DC input. Details for DX Engineering Reversible Beverage Antenna System Combos: Receive preamp: * Gain: 16 dB, +/- 1.5 dB, from 300 kHz through 35 MHz * Dynamic range (IM3) at 500 Hz BW: 110 dB or greater * Output Third Order Intercept: +43 dBm * Noise figure: 3.5 dB * Compression: 1 dB at +26 dBm (nominally 0.4 W output) * Power requirement: 12-18 V DC at 140 mA maximum * Power Input: 2.1 mm DC coaxial power connector Reversible Beverage transformer features: * Broad operating range, 0.2 to 30 MHz * Fully isolated grounds prevent common-made noise and unwanted signals * 75 ohm design enables the use of high quality, low cost cable and connectors * RF shielded housing used for isolation and improved life * Directional Switching Voltage: nominal 12 V AC or negative 12 V DC, feedline injected * Directional Switching Current: less than 80 mA * Antenna impedance: 300-600 ohm (450 ohm recommended) * Feedline impedance: 50-75 ohm (75 ohm recommended) * RBSA-1FP Feed Point unit dimensions: 5.5 in. width x 3.5 in. depth x 1.5 in. height * RBS-1RT Reflection Transformer unit dimensions: 2.125 in. width x 2.125 in. depth x 1.125 in. height Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Reversible Beverage Antenna System Combos offer package convenience and superior receiving results on today's crowded medium and shortwave bands as well as on the ham bands. SWLs and Radio Amateurs around the world have come to rely on the exceptional performance of DX Engineering products. Order one of these DX Engineering Reversible Beverage Antenna System Combos to make the best of your MW/HF reception!
Not Yet Reviewed
$605.97
DX Engineering LPFC-BNC Low Power Feedline Chokes
DX Engineering LPFC-BNC Low Power Feedline Chokes are intended to be placed in line with coaxial cable fed antennas and equipment used for portable operations, including POTA and SOTA activations. The DXE-LPFC-BNC coax wound toroid achieves an amazing common mode impedance (CMI) curve, with an RF choking capability that far exceeds the CMI of 'a-few-beads-on-coax' product that is offered by other suppliers. Actually, these "Low Power" Feedline Chokes can be used in any station that runs less than 250 watts SSB, 100 watts CW or Digital. ________________________________________ DX Engineering Low Power Feedline Chokes features and benefits: - A unique, lightweight form, with clear heat shrink over the choke* - Light enough to hang inline at the feedpoint of any portable HF antenna. - BNC female connectors for easy connection to portable antennas and gear. - Much higher CMI that other portable, low power chokes, especially across the 40 through 6 meter bands. - Frequency range of 1.8 through 54MHz. - RF Power Handling up to 250 watts PEP SSB, 100 watts CW and Digital (at SWR <2:1). - Recommended for general use to isolate either end of a coaxial cable. * Not intended for permanent outdoor use unless mounted inside a weatherproof enclosure. ________________________________________ These chokes are ideal for use at any HF transceiver or receiver antenna connection, portable, mobile or base. In most cases, DXE-LPFC-BNC prevents RFI, stops stray RF and noise on the feedline from getting into the receiver that would cover up weak signals, and improves efficiency of the antenna system. For any station, including POTA and SOTA, mobile and base, DX Engineering Low Power Feedline Chokes keep the RF controlled.
Not Yet Reviewed
$59.99
DX Engineering 2-Port Receiving Antenna Switches
DX Engineering 2-Port Receiving Antenna Switches are for receiving systems designed to allow for the selection of one of two output ports from one feedline. Typically connected to different receiving antennas, these RoHS-compliant receive antenna switches activate with the application of a control voltage injected onto the feedline of either +10-15V DC or 9-12V AC. The optional DX Engineering Feedline Voltage Coupler may be used to supply control voltages through a single main feedline. Three RLS-2 Two-Port Receiving Antenna Switches may be configured to allow control of the switching selection of four different receiving antennas. When used with two DX Engineering Reversible Beverage Systems, one of these RLS-2 units will delegate switching voltages and allow for the selection of four directions, sharing the 75 ohm feedline, and passing 500 kHz through 30 MHz receive back to the operating position. Features of DX Engineering 2-port receiving antenna switches include: * Metal housing for superior shielding and long life * High-quality components * Reliable F-type connectors * Jumper-selectable, control voltage pass-through to the activated port Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Build your special receive antenna switching system with DX Engineering 2-Port Receiving Antenna Switches!
Not Yet Reviewed
$115.99
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units
DX Engineering PS-3B PRO-STACK Three Antenna Phasing Units offer the ultimate performance for combining three identical Yagi or Log Periodic directional antennas and may be used for vertical antennas in a phased array that cover any band, from 160 through 10 meters. Pro-Stack frequency independent broadband phasing devices operate optimally with three properly spaced mono-band antennas, but can be used with three identical stacked multi-band beam antennas, for pattern and null steering that wins contests and snags the rarest DX! Signals arrive at your antenna system from different azimuth directions and different elevation angles. Adding a stacking phasing system to a rotational array adds the ability to steer the pattern of the antenna array in two planes, azimuth and elevation, and to move the major lobe and nulls. The greatest advantage of Pro-Stack arrays is the ability to move harmful pattern nulls away from signal arrival angles. While gain makes a marginal improvement, moving a 20 to 40 dB null can be a phenomenal change, so the Pro-Stack can make the difference between a barely readable and a strong signal, providing the performance edge needed to work rare DX - and win contests. DXE-PS-3B Pro-Stack Phasing Units are 50 ohm relay systems that handle up to 5 kW. A separate user-supplied automated controller or the optional DX Engineering DXE-EC-PS3 Control Console for these 12-position rotary switch selections: - Three antenna ports in phase, default with no power to control console. - Antenna port 1 only - Antenna port 2 only - Antenna port 3 only - Port 2 out of phase, Port 3 in phase - Port 1 out of phase, Port 3 in phase - Port 1 out of phase, Port 2 in phase - Ports 2 and 3 in phase - Ports 1 and 3 in phase - Ports 1 and 2 in phase - Ports 1 and 2 in phase, Port 3 out of phase - Ports 1 and 3 in phase, Port 2 out of phase - Port 1 out of phase, Ports 2 and 3 in phase These PRO-STACK units may also be used for other applications requiring these feedline selections. To ensure lowest SWR, impedance matching automatically changes when any antenna is disabled. By switching between antennas at different heights above ground and/or changing the phase relationship between multiple antennas. The old standard system in stacks was to activate or disable specific antennas in the stack to change pattern. However, with the Pro-Stack system, gain remains higher when all antennas are driven and phase is changed, plus this system allows phase inversion as well as the ability to switch any single antenna out of the array. DXE-PS-3B Broadband Phasing Units provide the greatest flexibility for three identical antennas. This relay unit contains a broad-bandwidth high-power 2:1 impedance matching transformer. This eliminates common requirements of using mixtures of 75 ohm and 50 ohm phasing or delay cables for impedance matching. Feedlines to each antenna from the relay unit must be the same cable of the same length and match the antenna impedance. DXE-PS-3B Pro-Stack Broadband Three Antenna Phasing Units feature: - Power Handling up to 5 kW - Broad band coverage on 160-10 meters - RF Shielded Weatherproof Housing - unique protection - DXE-PS-3B has High-RF tolerant, silver - PTFE UHF connectors - DXE-PS-3BDIN has Amphenol Connex 7/16 DIN Panel Connectors - DXE-PS-3BN-P are made with high-quality silver-PTFE Type N female connectors - Proven high current DX Engineering RF Relays - Safe 12 volt dc relay operation - MOV surge protection on control lines - RoHS compliant assembly Get a DX Engineering PS-3B PRO-STACK Three Antenna Phasing System for your winning antenna array.
Not Yet Reviewed
$895.99
—
$999.99