Availability
Misc Vendor Cable and Connectors
Pigtail Cables for Yaesu Azimuth-Elevation Rotator Controllers
Pigtail Cables for Yaesu Azimuth-Elevation Rotator Controllers offer a handy way to be able to use the quick-disconnect premade DX Engineering Yaesu Rotator Cable Assemblies (DXE-YRC series). Each 3 ft. pigtail has a female 6-pin connector on one end and #6 Ring Terminals installed on each color coded conductor at the other end, for permanent attachment to the screw terminals on the Yaesu Azimuth-Elevation Rotator Controller. Heat shrink on the cables and conductors provides strain relief and longevity. These pigtails make it much easier to move the controller into a different position, or for testing and for disconnection as a protection method. Purchase two pigtails per controller, one for the Azimuth rotator unit and one for the Elevation rotator unit. NOTE: Yaesu uses only five (5) conductors on each of the azimuth and elevation control cables. One pin of the 6-pin connector is open intentionally.
( 1 )
$53.99
Extension Cables for Yaesu Rotator Controllers
Extension Cables for Yaesu Rotator Controllers provide an easy-to-reach quick-disconnect in the station for user made or for premade DX Engineering Yaesu Rotator Cable Assemblies (DXE-YRC series). Available in several lengths, purchase the extension cable length you need to make it easy to disconnect the rotator control line from your Yaesu controller. These cables allow the controller to be repositioned and moved more easily. Plus, disconnecting the rotator control line when leaving the shack offers additional protection for the controller. Each 6-conductor 18 AWG extension cable has the standard Yaesu female 6-pin Molex installed on one end and the male 6-pin Molex installed on the other end, for use between the long Yaesu rotator control cable run and the rotator controller. Heat shrink on the cable ends provide strain relief and longevity.
Not Yet Reviewed
$47.99
—
$62.99
DMV Audio and Keying Connectors and Adapters
Choose from an assortment of quality audio and keying connectors and adapters that will help make the connection to a new accessory or to complete your next project. With various types and sizes available, you're sure to find what you need at DX Engineering!
( 2 )
$0.74
—
$9.29
DMV Y-Adapter Stereo Separation Cables
DMV Y-Adapter Stereo Separation Cables have a versatile length of 5 ft. 10 in. with one stereo male 3.5mm TRS plug and two independent RCA phono male plugs. The 3.5mm TRS plug is wired as Tip=Left=Red phono and Ring=Right=White phono, atypical for audio. Of course, the common shield of the 3.5mm plug goes via the shield of the cables to both RCA phono shields. For use on TopTek Amplifiers the 3.5mm plug tip is connected to the Red phono plug center that needs to be grounded by the transceiver amplifier keying line when the radio PTT is keyed. When used for an Icom IC-705 Transceiver, this cable splits amplifier keying SEND and ALC. The Red phono plug connects to the "Relay" or "PTT IN" connection on an amplifier and the White phono plug center that is connected to the ring of the 3.5mm TRS is an ALC input provided for convenience. However, an ALC output isn't provided on most intermediate amplifiers that would be used with the IC-705. So that connector can be ignored. Yes, this stereo audio Y-adapter can be used as an "AUX" Cable to connect a 3.5mm stereo source, like a mobile device, to the AUX or other line level input of a stereo audio amplifier, but not a "phono" input. In some audio devices, this cable would provide "reversed" stereo if connected normally, because on this cable the Red plug is Left Channel and White plug is Right Channel, opposite from the way RCA phono patch cables are usually connected. That's not really a problem... just reverse them and rock on!
( 1 )
$5.99
DMV Standard 1/4 in. Stereo Phone Plugs
Build or repair your audio or keying equipment cables with these solder-type Standard 1/4 in. Stereo Phone Plugs. These are shielded 1/4 in. (6.35mm) phone plugs with the 3-conductor TRS plugs (Tip-Ring-Sleeve), a positive grip knurled metal connector body with a spring type cable strain relief. Order several for your custom patch cable projects and to have them on hand for unexpected repairs!
( 1 )
$2.58
Clearance
Gigaware USB-C To Micro USB Cables
These USB 2.0 cables have a USB-C connector on one end and a Micro USB connector on the other end and measure 3 ft. in length.
Not Yet Reviewed
$10.99
$8.24
Clearance
DMV Dual Stereo Headphone 1/4 inch Plug Adapters
DMV Dual Stereo Headphone 1/4 inch Plug Adapters allow you to connect two full-size headphones to any 1/4 inch (6.35 mm) stereo headphone jack. Gold-plated connectors provide corrosion-free contacts. Similar to a Y-adapter without the cable, this single-body adapter plugs into a single 1/4 inch stereo headphone jack and accepts two 1/4 inch stereo headphone plugs. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$8.38
$6.28
Clearance
DMV Coaxial RF Connector Adapters
DMV Coaxial RF Connector Adapters feature a wide selection of coaxial adapters. These adapters are used for changing connectors to different types and genders as well as connecting RF cables and equipment with different types of connectors. DMV Coaxial RF Connector Adapters are available in many configurations to help complete your RF connections. You never know when you will need one, so order several today! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 3 )
$6.15
$4.61