Availability
Cable and Connectors
DX Engineering Next Generation Crimp/Solder 8U PL-259 Connectors
DX Engineering proudly announces our new, ultra-high quality, PL-259 connector that is so different from previous designs that we have a Patent**! DX Engineering Next Generation Crimp/Solder 8U UHF Male Connectors are now available to build your custom coaxial cable assemblies. Engineering studies have confirmed that the absolute best RF connections for double-shielded cables like LMR-400 and DXE-400MAX are made by crimping the shield, not soldering. However, most PL-259 crimped center pins aren't large enough and don't have enough contact area, which affects reliability. DX Engineering has solved those issues with these custom-designed connectors that we introduced on DX Engineering DX Series Coaxial Cable Assemblies. These PL-259s have soldered center pins that are full length and full diameter, so they connect properly, even with worn SO-239s. DX Engineering Next Generation PL-259CS8U series connectors achieve exceptional RF performance and power handling with these features: * All silver-plated brass shell and body * Silver-plated center pin securely mounted in PTFE dielectric * Center pin accepts large conductors and scalloped-tip allows generous solder flow * Crimped shield connection provides maximum reliability for all cables * Deep, double-knurled threaded shells for secure finger tightening * Fits all RG-8U size cables with center conductors up to 10 AWG including DXE-400MAX and LMR-400 as well as RG-213U, RG-11U and many others, including Belden 7810A, 8214, 8267 and 8237, 9913 and 9913F7. * Available in packages of 6, 12 or 24 connectors NOTE: DX Engineering offers reasonably priced, professional grade cable prep and connector crimping tools for an entire range of cables and connectors. Click "More Details" and the "Suggested Parts" tab to see available related products. Now you don't have to use the same old PL-259s. These advanced-technology PL-259 connectors let you build the highest quality coaxial cable assemblies. We designed them to be strong and lightweight and they represent a landmark improvement over decades-old, unchanged connector designs. This time, new IS better! Order DX Engineering Next Generation Crimp/Solder 8U UHF Male Connectors today and take advantage of DX Engineering innovations in RF connectivity! **U.S. Patent D745849
( 234 )
$39.99
DX Engineering Premium Antenna Wire
DX Engineering Premium Antenna Wire helps you achieve top performance and long, trouble-free operation at a very reasonable cost. This PVC-insulated 14 AWG stranded copper wire is comprised of 19 strands of 27 AWG solid copper. Its relaxed PVC insulation is UV-resistant and rolls out easily, unlike wire that is commonly available at "big-box" stores, which coils and kinks. Our antenna wire is well worth its price for its features, especially for ease in handling. Over a decade of successful wire antenna installations have proven this insulated copper wire is up to the task. Conservatively rated at 92.5 lbs. breaking strength, this wire is strong enough for virtually every wire antenna application. Suggested installation includes supporting the feedpoint to properly handle the weight of the feedline, and balun if used, so that the wires only need to support themselves. When placed under extreme stress, this copper wire will stretch before breaking, allowing it to serve in a longer lasting installation for wire antennas of almost any style. Available in several pre-cut coiled lengths as well as on 500 and 1,000 ft. rolls, UV-resistant black insulated 14 AWG stranded copper DX Engineering Antenna Wire lasts longer than bare wire exposed to the elements. Use it with confidence for your wire antenna projects and get on the air!
( 144 )
$22.49
—
$49.99
Times Microwave Systems® Coaxial Connectors
Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
( 38 )
$20.19
—
$49.15
Summit Racing™ Solderless Heat Shrink Terminal Kits
Don't risk the integrity of your electrical system by using cheap electrical connectors. Our Summit Racing™ solderless heat shrink terminals are tougher than typical vinyl connectors, keeping your electrical connections secure, better insulated, and corrosion-free. They come with connectors from 22-18 gauge to 12-10 gauge--everything you need for your current (and future) wiring jobs.
( 1 )
$37.99
Summit Racing™ Heat Shrink Self-Solder Wire Splice Connectors
Summit Racing™ heat shrink self-solder wire splice connectors provide an easy way to make permanent, waterproof electrical wire connections. These "butt-splice" connectors are packaged in multiple sizes to allow you to quickly solder and weather-seal insulated wire splices with no more than a heat gun! A crimping tool is not required. Additional details: * Provides a reliable alternative to crimping, welding, or conventional twist-on-style closed-end connectors * Translucent, gauge-printed heat shrink allows for visual inspection * Greater pull strength, when compared to vinyl or nylon * Heat shrink terminals protect against corrosion and are waterproof * Available in color-coded sizes from 10 to 22 AWG to cover a range of wire thicknesses * Includes plastic case with compartments to hold connectors
( 1 )
$32.99
Heil Sound Headset Adapter Cables
Heil Sound Headset Adapter Cables are used to interface your Heil headset to your favorite transceiver. Heil AD-1 series headset radio cables are required for Heil boom microphone headset models including PROSET Elite, PROSET, the original and reintroduced PRO-MICRO series, the lightweight, yellow BM-17 series and BM-10 series headsets, and the legacy PROSET PLUS. These cables support all of the Heil Sound Headsets that feature a 3.5 mm (1/8 in. miniature phone) mono connector for the microphone audio. Each has a female 1/4 in. mono dongle connector on a short wire for PTT keying foot switch or hand switch connection. NOTE: These Heil Headset Adapter Cable assemblies handle mic audio and keying, NOT the headphone audio. The stereo male plug on your headset cable connects directly to your transceiver headphone jack, not to the AD-1 series adapter cable. Headsets typically include stereo 1/8 in. (3.5mm) to 1/4 in. (6.35mm) headphone audio adapters. All Heil Headset Adapter Cables use commercial-grade microphone connectors with dual-exit cable clamps that are much heavier than the normal CB-type connectors that the industry had been forced to use for decades. If you have several brands of transceivers, individual adapter cables may be connected to each radio, so you may quickly and easily move your Heil boom microphone headset from one transceiver to another, without having to remove any connectors from the transceivers. All Heil audio cables are wired through to support VOX operation. Heil Sound Headset Adapter Cables are available in 4-pin and 8-pin round connectors, and 6-pin and 8-pin modular-style connectors. HSTA series Headset Adapter Cables were specially designed for the legacy Heil TRAVELER Headsets that were discontinued and are no longer available. Some of the presently available adapter cables feature an extra wire and connector to go to the transceiver external speaker connector, for those radios where receive audio is not provided on the microphone connector. On transceivers that support them, the special UP-DOWN buttons on the TRAVELER Headset cables are connected with these cables.
( 215 )
$30.00
Summit Racing™ Accessory Wire
Summit® Accessory Wire isn't the run-of-the-mill wire that is found in a local hardware store. This is high-quality stranded-copper wire with excellent insulation that resists grease, oil, and acids. Use it for all types of projects to suit your needs. This top-notch wire is available in a variety of AWG sizes and lengths with several insulation colors for a professional wiring. Order a few rolls now to have on hand and be ready for your next electronics or electrical project!
( 2 )
$29.99
—
$49.99
DX Engineering RG-8U PL-259 Low-Loss 50-ohm Coax Cable Assemblies
Our patented* revolutionary new PL-259 connector and our high quality, low-loss RG-8U coaxial cable were designed to make the new, extra-flexible DX Engineering RG-8U PL-259 Low-Loss 50-ohm Coaxial Cable Assemblies the best RG-8/U cable assemblies available for all HF, VHF and UHF applications. DX Engineering 8U coax features a super-flexible jacket made with UV-resistant, Type I PVC jacket which is great for all indoor and above-ground outdoor applications. With a large 11 AWG stranded copper center conductor, our 8U DX Series low-loss assemblies are well suited for short interconnections as well as long cable runs in low or high power operations. Our 8U coax cable also features modern, gas-injected foam polyethylene dielectric that cannot absorb moisture and has excellent shielding with minimum 95 percent coverage copper braid. DX Engineering 8U is a new-age cable that far surpasses the capabilities of the moisture collecting foam RG-8/U of 35 years ago. Now regarded in the industry as a top quality low-loss feedline, our 8U Coaxial Cable is custom made for DX Engineering to provide the highest performance with extraordinary flexibility. DX Engineering RG-8U PL-259 Low-Loss Coaxial Cable Assemblies are terminated with our new, custom-designed, silver-plated brass-bodied DX Engineering PL-259 (UHF male) connectors. These next generation PL-259 connectors feature: -Full diameter, full length soldered center pins that snugly fit even worn SO-239s -Spacious center pin inside diameter that accepts large conductors and allows generous solder flow -Deep, double knurled threaded shells for secure finger tightening These new, ultra-high quality PL-259s have all silver-plated brass shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. Our 8UDX Series cable assembly PL-259 center pins are hand soldered by trained assembly techs to assure a proper connection. These special PL-259 cable assemblies also feature machine crimped shields, with 360 degrees of complete mechanical and electrical contact for maximum reliability. Every assembly is continuity and Hi-Pot tested and then heat-shrink weather-sealed for the ultimate service longevity. You won't find this level of cable assembly quality anywhere else! DX Engineering RG-8U PL-259 Low-Loss 50-ohm Coaxial Cable Assemblies with our new PL-259 connectors are available only from DX Engineering! *U.S. Patent D745849
( 113 )
$38.99
—
$43.99
DX Engineering Cable Mount Crimp/Solder SO-239 Coaxial Connectors
DX Engineering Cable Mount Crimp/Solder SO-239 Coaxial Connectors provide dependable performance for HF, VHF, and UHF applications. Each connector features a nickel-plated body and ferrule for durability and corrosion resistance, a gold-plated solder center pin, and a crimp-style shield termination. The PTFE dielectric ensures very low RF loss and exceptional electrical breakdown strength, making these connectors the preferred choice for many RF applications. Available for RG-8X/LMR®-240 and RG-8U/LMR®-400 cables, these connectors will let you connect two cables together with no adapters.
Not Yet Reviewed
$29.99
DX Engineering Vertical Antenna Feedpoint Cables
DX Engineering vertical antenna feedpoint cables are designed to convert the Hustler BTV base connections to a PL-259 type connector. Just add a bulkhead connector to make them to your feedline and you're done! They will also work great for the DX Engineering radial plate. The cables are manufactured from RG-8X cable, have a silver-plated, brass bodied, PTFE dielectric PL-259 connector, and special shrink tubing to help promote weather resistance. The other end of the cable uses a #10 outer ring terminal, a 1/4 in. center ring terminal, and has a 50 ohm rating.
( 5 )
$47.99
DX Engineering's RG-8X 50-ohm Coax Cable Assemblies
DX Engineering RG-8X 50-ohm Coaxial Cable Assemblies are made from our very flexible low-loss, gas-injected foam dielectric feedline. Featuring stranded copper center, braided copper shield and a non-contaminating Type IIa PVC jacket good for direct burial, our DXE-8XDX series cable assemblies are intended for moderate-power HF stations or mobile applications where short runs and flexibility are key factors. Slightly larger than RG-58 cable, DX Engineering RG-8X offers better handling characteristics, very good shielding, and lower loss. RG-8X 50-ohm Coaxial Cable Assemblies come complete with high quality silver plated PTFE dielectric PL-259s. Their machine-crimped shields feature 360 degrees of complete mechanical and electrical contact for maximum reliability. All DX Engineering Cable Assemblies are Hi-Pot tested and heat-shrink weather-sealed for the ultimate in service longevity. Order some extras today, to have on hand for the next time you add, change, or rearrange your equipment. DX Engineering RG-8X 50-ohm Coaxial Cable Assemblies are perfect in every station!
Not Yet Reviewed
$33.99
DX Engineering Heat Shrink Self-Solder Wire Splice Connectors
DX Engineering Heat Shrink Self-Solder Wire Splice Connectors provide an easy way to make permanent, waterproof electrical wire connections. Also known as butt-splice connectors, they come in four color-coded sizes to cover wire sizes from 10 to 26 AWG (6.0 sq. mm to 0.2 sq. mm), available in 10, 25 and 50 count packs of each size, and in variety packs of all sizes in 6, 10 and 20 count of each size. Also including internal flux, these connectors let you quickly, easily and securely solder and weather seal insulated wire splices with no more than a heat gun! No crimping tool required. Make permanent splices with DX Engineering Heat Shrink Self-Solder Wire Splice Connectors. Innovative wiring solutions are available from DX Engineering. Order your packages today.
( 10 )
$21.99
—
$32.99
12 Volt Power, Inc. DC Power Cable Assemblies
12 Volt Power, Inc. offers a range of premium DC power cable assemblies designed to supply power to HF transceivers, FM transceivers, and various electronic devices from multiple power sources and connector types. Look no further than DX Engineering for your 12 Volt Power, Inc. DC Power Cable Assemblies.
( 7 )
$24.99
—
$42.99
DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies
DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies are available in several useful lengths, terminated with DX Engineering Next Generation PL-259 connectors; ultra-high quality all silver-plated shells and bodies with center pins securely mounted in PTFE dielectric for exceptional RF characteristics and power handling. DX Engineering Next Generation PL-259 connectors feature: * Full diameter, full length soldered center pins that fully engage even worn SO-239s * Spacious center pin inside diameter that accepts large conductors and allows generous solder flow * Deep, double knurled threaded shells for secure finger tightening * All DX Engineering Cable Assemblies are Hi-Pot tested and adhesive heat-shrink weather-sealed for the ultimate in service longevity Times Microwave Coaxial Cables are recognized as superior RF cable products. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center conductor, a gas foam polyethylene dielectric, and a rubber-like black thermoplastic elastomer jacket designed for repeated bending. LMR®'s RF shielding is typically 50 dB greater than off-brand single braided shield coax. LMR® UltraFlex copper braid and multi-ply bonded foil outer conductor shields provide greater than 90dB shielding. That is better than 180 dB isolation between two adjacent LMR® cables. DX Engineering Times Microwave LMR® UHF Male Coaxial Cable Assemblies are an excellent choice for a variety of indoor, mobile, portable, and outdoor applications.
( 1 )
$42.99
—
$47.99
DX Engineering RG-8X High Visibility Orange 50-ohm Coaxial Cable Assemblies
DX Engineering RG-8X High Visibility Orange 50-ohm Coaxial Cable Assemblies are the most flexible and lowest loss high-quality orange coaxial cable assemblies on the market. DXE-8XV cable assemblies feature a stranded copper 16 AWG center conductor, gas injected foam dielectric, braided copper shield and non-contaminating, highly water-resistant Type II-A PVC UV stable direct-bury jacket. Our DXE-8XV High Visibility Orange cable assemblies are intended for HF portable applications where the visibility of short antenna cables and flexibility are desired. RG-8X High Visibility Orange 50-ohm Coaxial Cable Assemblies are terminated with high quality silver plated PTFE dielectric PL-259s, and select lengths with BNC connectors for POTA and portable operations. Their machine-crimped shields feature 360 degrees of complete mechanical and electrical contact for maximum reliability. All DX Engineering Cable Assemblies are Hi-Pot tested and heat-shrink weather-sealed for the ultimate in service longevity. NOTE: DXE-8XV Orange will fade with continuous sunlight UV exposure. Color delivered can vary. DX Engineering DXE-8XV Orange Jacket Coax has the same industry standard specifications as DXE-8X black jacket coax. DXE-8X is the coax cable most often used for jumpers in the shack and for medium length cables for portable operations, offering significantly better flexibility than larger cables, excellent shielding, and lower loss than smaller RG-58 and RG-174. DXE-8XV is the part number for this coaxial cable sold by the foot, and it is available in 1,000 ft. spools as DXE-8XV-1000. DXE-8XV Specs: Attenuation/100 ft. – Power Rating 0.65 dB @ 5 MHz – 3.0 kW 1.0 dB @ 10 MHz – 2.2 kW 1.5 dB @ 30 MHz – 1.2 kW For additional product information, please check the files in the "Documentation" section.
( 23 )
$36.99
—
$49.99
Summit Racing™ SXL Primary Electrical Wire
Summit® SXL Primary Electrical Wire is an excellent choice for electronics and low voltage electrical projects, especially where high heat is present. Insulated with cross-linked polyethylene thermoplastic, this stranded copper wire is designed for use in engine compartments. Rated for use in circuits of 50 V or less, this wire has a temperature rating of 257 degrees F and resists the abrasion, oil, and gas found in high-heat applications. Summit® SXL Primary Electrical Wire meets USA vehicular SAE J1128 specifications, so it's the perfect choice for automotive electrical system projects. This top-notch wire is available in a variety of AWG sizes and with several insulation colors for a professional wiring job. Order a few rolls now to have on hand and be ready for your next electronics or electrical project!
Not Yet Reviewed
$31.99
—
$49.99
Heil Sound Microphone Adapter Cables
Superior-quality Heil Sound Microphone Adapter Cables, CC-1 series, are used to connect your Heil microphone to your favorite transceiver. There are two types of cables available for the two types of Heil microphones, 4-pin XLR and 3-pin XLR. Both adapter cable types feature the PTT mono 1/4 inch (6.35mm) jack at the transceiver mic connector for a foot switch or hand switch. Heil Sound Microphone Adapter Cables are available with round 8-pin, round 4-pin and 8-pin modular-style connectors for most transceivers. Most Heil Microphone adapter cables feature the special 4-pin XLR connector to serve the Heil microphones that have a built-in PTT switch. They work with the Classic, Goldline, GM, HM-12 Genesis, Handi-Mic, HM-10XD and HM-10 microphones. Use of an external foot or hand switch is optional. Conversely, the cables with the letters "XLR" in the part number have the audio industry standard 3-pin XLR microphone connector. These cables are required for the "PR" PRO Series microphones such as the PR-20, PR-28, PR-40, PR-781 and several others. Since these mics have no PTT switch, they require the use of an outboard hand or foot switch connected to the adapter cable PTT jack. Features and benefits of Heil Microphone Adapter Cables compared to others: * 100 percent silver-braid shield... keeps noise OUT * PTT control lines are OUTSIDE the shield... eliminates stray coupling * Made using commercial-audio grade 'Heilwire'... strong and supple * 18-gauge wire; not 22 or 24 like others... lower cable resistance * Commercial-grade microphone connectors (patent pending)... lasting durability * Heil dual-exit cable clamps are heavier than normal connectors... robust reliability * Outstanding engineering... lowest-noise transmit audio The XLR connector's quick-disconnect feature lets you easily move your Heil microphone from transceiver cable to transceiver cable, at the microphone end, without having to rewire a boom or remove any connectors from the transceivers. Additionally, all Heil audio cables are wired through to support VOX operation. Don't attach a high-quality microphone to cheap cable! Order your Heil Sound Microphone Adapter Cables from DX Engineering and transmit the best audio possible!
( 149 )
$30.00
—
$49.00
DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Assemblies
DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Cable Assemblies feature high quality BNC male connectors. An easy-to-see orange jacket on this extremely thin, 0.11 inch diameter, super flexible cable is a smart choice for SOTA, POTA and other quick-deploy portable antennas that are fed with a 25, 35 or 50 ft. length. These 1.5, 3 and 6 ft. coax assemblies in orange are easy to identify on the test bench and behind the radio for QRP and receive only connections. How is this a good choice? CLICK the cable to see the product page. The OVERVIEW has a Loss Chart with interesting info. The efficiency of this amazingly thin coaxial cable is unexpectedly good, adding slightly more attenuation for a given length as compared to larger, heavier coax on HF. For typical applications with portable antennas and equipment interconnections, the losses are inconsequential on the HF bands with the cable lengths offered. A typical portable antenna used with a 25 ft. cable has 0.73dB loss on 14 MHz (20M band) which represents only 15% loss. An extreme example is with a 50 foot DXE-174VDB050 cable used on a 10 meter (28 MHz) antenna has just over 2dB attenuation. Even this power loss of 38% results in an imperceptible difference at the receiving end of a radio contact. Losses are insignificant with DXE-174V cable assemblies on HF bands, especially with 1.5, 3 and 6 ft. length jumpers, or with 25 and 35 ft. cables. Use DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Assemblies for HF POTA and SOTA antennas that are easier to wrap up, carry, install and pack up. They're ready for your HF portable operations and much more! NOTE: These cable assemblies are NOT intended to be used for long lengths on VHF or UHF antennas, on frequencies above 50 MHz with significant loss.
( 3 )
$21.55
—
$37.05
DX Engineering RG-8X BNC Low-Loss 50-ohm Coax Cable Assemblies
DX Engineering RG-8X BNC Low-Loss 50-ohm Coaxial Cable Assemblies are very flexible low-loss, foam-dielectric, braided shield cable intended for special connections to BNC equipment. Suitable for moderate-power, base, mobile or portable applications where short runs and flexibility are key factors. NOTE: THESE ARE NOT PL-259 CABLES. These assemblies have BNC MALE connectors installed at each end of the cable, for use on specialized equipment with BNC Female connectors. Slightly larger than RG-58 cable, DX Engineering DX Engineering RG-8X BNC Low-Loss 50-ohm Coaxial Cable Assemblies are made from our new-process low-loss, gas injected foam dielectric cable. Featuring stranded copper center, braided copper shield and a non-contaminating Type II PVC jacket, our 8X BNC cable assemblies are intended for low to moderate power, test and mobile applications where short runs and flexibility are key factors. Slightly larger than RG-58 cable, DX Engineering RG-8X offers better handling characteristics and very good shielding. Plus, this is the new type of foam that cannot gather moisture and has lower loss than old RG-8X foam cables. Our RG-8X BNC Low-Loss 50-ohm Coaxial Cable Assemblies come complete with high-quality nickel-body Delrin-dielectric BNC male connectors. Their machine-crimped shields feature 360 degrees of complete mechanical and electrical contact for maximum reliability. Their gold-plated center conductors are hand soldered and inspected. All DX Engineering Cable Assemblies are Hi-Pot tested and heat-shrink weather-sealed for the ultimate in service longevity. When you are looking for pre-assembled BNC male cable assemblies and want a high-quality, reliable product, look no farther than our own DX Engineering RG-8X BNC Low-Loss 50-ohm Coaxial Cable Assemblies!
( 38 )
$35.99
—
$40.99
Yaesu DC Power Cables
Yaesu DC Power Cables are as originally supplied for your Yaesu radio. Yaesu-matched power connectors and in-line fuses allow you to safely connect your radio to a DC power supply or run it mobile. An extra DC power cable makes it easy to move your radio from one power source to another… or home to car. Replacement Yaesu DC Power Cables are available now; here at DX Engineering!
( 76 )
$25.49
—
$47.99
DX Engineering RG-6/U 75-ohm Quad-Shield Coax Cable Assemblies
Our new DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies are constructed from our own premium DX Engineering brand RG-6/U 75 ohm cable and superior quality weather-sealed nickel-plated compression F connectors. Their best-in-class design reduces loss and provides greater protection against electromagnetic interference. Available in specific lengths between 3 ft. and 200 ft., these pre-assembled cables with F connectors are your most convenient ultra-high quality RG-6/U cable solution. These RG-6/U cable assemblies are ideal for many applications such as active or passive HF Amateur Radio receive antenna systems, magnetic loop antennas, Beverage antennas, over the air TV reception, FM broadcast reception, CATV systems, raw video distribution and satellite radio installations like Sirius/XM. In fact, their low-loss characteristics are excellent up to the microwave frequencies that Satellite Radio systems employ! Our RG-6/U cable assemblies have gas-injected polyethylene foam dielectric for flexibility and moisture resistance. Their 18 AWG center conductor is copper-clad steel and is durable in the extreme. They have two foil shields plus two high-density aluminum braids for ultimate four-layer RF shielding. Their UV protected black exterior jacket is tough PVC (polyvinyl chloride). DX Engineering RG-6/U cable impedance is 75 ohms with an 83 percent velocity factor and have a minimum bend radius of 2.50 in. This is absolutely the best RG-6/U cable available and it's RoHS compliant! Look at these attenuation figures per 100 ft.: 5 MHz: 0.6 dB 30 MHz: 1.1 dB 55 MHz: 1.6 dB Are you installing or upgrading any receiving antenna or video distribution system that uses RG-6/U cable? If so, then these exceptional DX Engineering RG-6/U 75-ohm Quad-Shield Coaxial Cable Assemblies will make your installation easier and your results so much better!
( 13 )
$28.99
—
$49.99
PackTenna Coaxial Cable Assemblies
PackTenna Coaxial Cable Assemblies are available in RG-316 and LMR195 cable types, these assemblies feature BNC male connectors in both straight and right-angle configurations for flexible cable routing. The 3-foot cable is ideal for short interconnects between radios, tuners, or amplifiers, while longer lengths are well-suited for longer HF/VHF/UHF cable runs.
( 2 )
$28.00
West Mountain Radio DC Power Cables
West Mountain Radio DC Power Cables are ready to connect your equipment with a variety of DC connectors, including Anderson Powerpoles. They provide the user with a multitude of options for connecting RIGrunners or other West Mountain Radio DC power products to Amateur Radio equipment or other DC electronic devices. You'll find convenient cables to connect power from RIGrunners and other equipment. There is also an assortment of DC cables used to power HF transceivers, FM transceivers, and various electronic gadgets from Powerpole-equipped power sources. Many have Powerpoles already installed at one end! Connector types include HF-radio 6-pole connectors, alligator clips, coaxial power connectors, blade connectors, ring terminals, and more. It's clear that when you want to connect DC to just about anything else, you need to order from DX Engineering to get your West Mountain Radio DC Power Cables!
( 25 )
$24.95
—
$39.95
Summit Racing™ Deutsch Terminal Packs
Summit Racing™ Deutsch terminal packs include male and female terminals to properly assemble Deutsch connectors on 16-18 AWG or 14-16 AWG wire. Order the size needed for your wiring application.
Not Yet Reviewed
$21.99
—
$24.99