Availability
DC Power
Deltran Battery Tender Plus Systems
Deltran Battery Tender Plus systems are designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Features include: * Quick-connect harness for hard-to-reach areas * Temperature compensated to ensure optimum voltage according to ambient temperature * Automatic switching from full charge to floating mode * Reverse polarity protection * Complete 3-step charging program (Bulk Charge, Absorption Mode, Float Mode) * 10-year warranty
( 1 )
$58.99
Summit Racing™ Premium Battery Boxes
If your headlights dim when you transmit with that 500 watt mobile HF amplifier, you may need an extra battery and one of our Summit Racing® Premium Battery Boxes! These battery boxes offer solid protection for auxiliary batteries and an extra battery to provide the reserve power that mobile amplifiers often need. These sealed-type plastic boxes protect your auxiliary battery from moisture, dirt, and debris, while the vent-tube expels battery gasses from the box to prevent buildup. In-cab or in-trunk mounting is possible if proper vent-tube installation is followed. You customize each battery box for each vehicle application by drilling the battery box for cable and vent-tube access. Inside dimensions are approximately: L- 10.75 in.; W - 8.5 in.; H- 9 in. They are available in red or black finishes and include mounting hardware. What more could you ask? Give your auxiliary battery extra protection and reduce under-hood clutter with these premium battery boxes. Call DX Engineering today to get one of your own Summit Racing® Premium Battery Boxes and keep those headlights bright!
Not Yet Reviewed
$93.99
NOCO GENIUS10 Smart Battery Chargers
The NOCO GENIUS10 smart battery chargers are fully automatic and easy to set up for worry-free charging. Simply plug-in, connect to the battery, select a charge mode, and start charging your battery. An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates or under-charging in cold climates. The GENIUS10 charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts. These chargers also detect sulfation and acid stratification—and restore lost performance for stronger engine starts and extended battery life. The GENIUS10 smart chargers are compatible with 6 V and 12 V lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.
Not Yet Reviewed
$99.99
NOCO GENIUS5 Smart Battery Chargers
The NOCO GENIUS5 smart battery chargers are fully automatic and easy to set up for worry-free charging. Simply plug-in, connect to the battery, select a charge mode, and start charging your battery. An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates or under-charging in cold climates. The GENIUS5 charges dead batteries as low as 1-volt. Or use the all-new Force Mode that lets you take control and manually begin charging dead batteries down to zero volts. These chargers also detect sulfation and acid stratification—and restore lost performance for stronger engine starts and extended battery life. The GENIUS5 smart chargers are compatible with 6 V and 12 V lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.
Not Yet Reviewed
$69.95
Bioenno Power BLF-1206A LiFePO4 Batteries
Bioenno Power BLF-1206A LiFePO4 Batteries are state-of-the-art 12 VDC 6 Ah Lithium Iron Phosphate batteries that are one of the most sought-after batteries for radio communications and other applications where space comes at a premium, but absolute performance is critical. These batteries are small and lightweight but also provide excellent power and performance for their size. The integrated PCM (Protection Circuit Module) provides complete internal cell balancing and management, protection from over current, under voltage (over-discharge), over-voltage, and short-circuiting and includes integrated charging circuitry. Additionally, like all Bioenno Power batteries with multiple connectors, you can discharge or charge through either connector! Enjoy quiet EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) free performance, order a Bioenno Power BLF-1206A LiFePO4 Battery from DX Engineering.
( 3 )
$79.99
Deltran Two Bank Battery Tender Charging Stations
The Two Bank Battery Tender Charging Stations are two encased 1.25 amp battery chargers. They're designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. These chargers will operate anywhere in the world! Choose between the three global regions: Continental Europe, Japan, and USA/Western Hemisphere.
( 2 )
$99.99
Bioenno Power BLF-12045W LiFePO4 Batteries
Bioenno Power BLF-12045W LiFePO4 Batteries are state-of-the-art 12V 4.5 Ah Lithium Iron Phosphate batteries that are slightly larger than the BLF-1203W series battery. These batteries are small, lightweight and extremely compact and they are ideal for portable low power consumption applications. The integrated PCM (Protection Circuit Module) provides complete internal cell balancing and management, protection from over current, under voltage (over-discharge), over-voltage, and short-circuiting and includes integrated charging circuitry. Additionally, like all Bioenno Power batteries with multiple connectors, you can discharge or charge through either connector! Enjoy quiet EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) free performance, order a Bioenno Power BLF-12045W LiFePO4 Battery from DX Engineering.
( 2 )
$64.99
Paradan Radio Power Strip 4 Plus
The Paradan Radio Power Strip 4 Plus lets you neaten up the DC cables at your station! This 40 ampere metered power strip is ideal in your shack or is especially well suited for mobile installations and go-boxes. The lower horizontal Powerpole connector design allows DC cables to fan out easily from the bottom of the panel. The bright LED display accurately shows the input DC voltage in red and the total DC current in blue. The input is fused at 40 amp and the strip is RF filtered. Anderson locking clips may be used to secure the connections. This panel is supplied with a pack of 5 pairs of Powerpole connectors. Specifications: Voltage: 13.8 volts nominal, 18 volts maximum Current: 40 Amperes maximum total DC Connectors: Powerpoles Enclosure: Aluminum, painted black Dimensions, WHD: 5.1 x 2.2 x 1.0 in. (Powerpoles extend 0.6 in.) Flange Mounting Holes: accommodate #6 screws, 4.7 x 1.4 in. on center Weight: 5.5 oz., 160 g
( 19 )
$95.99
JOES Racing Products 4-Terminal Battery Disconnect Switches
Whether you have an emergency situation that requires an immediate shutdown, or you just want to prevent various accessories from draining the power source (your battery) when your vehicle is not use, JOES Racing Products 4-terminal battery disconnect switches can come to your rescue. The back of these units are treated with rubber sealant to keep out dirt and moisture to offer long service. They're designed for vehicles equipped with an alternator, and are engineered to close off the electrical current flowing from your battery in an instant with just a twist of the dial. You won't realize how valuable these 4-terminal battery disconnect switches actually are ... until you need to use them!
Not Yet Reviewed
$54.99
Bioenno Power BLF-1209A LiFePO4 Batteries
Bioenno Power BLF-1209A LiFePO4 Batteries are state-of-the-art 12V 9 Ah Lithium Iron Phosphate batteries featuring the smallest form factor Bioenno Power has to offer. These batteries are small, lightweight and extremely compact and they are ideal for portable low power consumption applications. The integrated PCM (Protection Circuit Module) provides complete internal cell balancing and management, protection from over current, under voltage (over-discharge), over-voltage, and short-circuiting and includes integrated charging circuitry. Enjoy quiet EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) free performance, order a Bioenno Power BLF-1209A LiFePO4 Battery from DX Engineering.
( 3 )
$99.99
Deltran Battery Power Tender Plus Systems
Deltran Battery Power Tender Plus systems are designed for either portable operation or permanent mounting. They will charge and maintain both flooded and sealed, maintenance-free, AGM, and lead acid batteries. Features include: * Water-resistant * Shock and vibration-resistant * Lightweight construction less than 4 lbs. * Microprocessor-controlled BTP technology * Reverse polarity protection * Complete 4-step charging system (Initialization, Bulk, Absorption, Float & Maintenance) * 2-year warranty
( 1 )
$99.99
12 Volt Power, Inc. 10 Amp Variable DC to DC Battery Chargers
12 Volt Power, Inc. 10 Amp Variable DC to DC Battery Chargers will keep your 12V Bioenno Power LiFePO4 batteries fully charged with your vehicles 12V charging system. User selectable 2.5/5.0/10A charging current accommodates batteries ranging from 5Ah up to 70Ah+. Wide input range accepts 8-32V DC. Preprogrammed for 14.6V DC output.
Not Yet Reviewed
$79.99
mAT-TUNER mAT-4117 Bias-Tee Power Injectors
mAT-TUNER mAT-4117 Bias-Tee Power Injectors allow you to use any device that requires a Bias-Tee for power. Simply plug your RF cable into the mAT-4117, connect power (anywhere from 1 to 50 volts DC, as required by the device that needs power,) connect the device that requires Bias-Tee voltage injection and you're ready to use the tuner or other device. The mAT-4117 features a combined RF/DC UHF Female (SO-239) connector on one side and a UHF Female (SO-239) and a 2.1mm DC jack on the other. A power switch allows for cutting power to a device such as a tuner after you have obtained decent match between the transceiver and the antenna (assuming the tuner uses latching relays).
Not Yet Reviewed
$89.95
Summit Racing™ Fuse Blocks
Add additional circuits the quick and easy way with our Summit Racing™ fuse blocks. They're available in different styles with different options to suit your specific application requirements.
Not Yet Reviewed
$51.99
—
$88.99
Samlex Rack Plates
Samlex Rack Plates are available separately, for mounting SEC Series power supplies in a rack. These handsome powder-coated steel rack mounts hold desktop power supplies in the proper position and have cutouts for their bottom mounted fans. Rack mount features: * Ultra Heavy Gauge Steel; will not bend or deform * Black powder coated finish is scuff resistant * Precision cut mounting slots for quick, easy and secure mounting * Vent slots allow unobstructed air flow from Power Supply cooling fans
( 1 )
$54.00
—
$69.00
Astron Power Supplies
When you are in need of reliable DC power supply, look no further than Astron Power Supplies. This line of linear DC power supplies are made of heavy-duty, high-quality materials. Astron has your power requirements covered with a wide variety of voltage and amperage outputs and case styles with and without meters. Even their power supplies with only cigarette lighter sockets or with Anderson Powerpoles on the front panel still have DC output terminals on the rear panel. That's convenient! Astron linear-type transformer power supply features include: * Solid state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L * Tight regulation and low ripple at low line input voltage * Heavy-duty heat sink (70A models add a low noise fan) * Three conductor power cord * All metered units feature backlit meters At DX Engineering, we bring you only the best - Astron Power Supplies do not disappoint! Performance specifications: * Input Voltage: Most models are built for 105 to 125 VAC input. Some "220" models are built for 210-250 VAC input. * Output Voltage: As Listed * Ripple less than 5 mv peak to peak (full load and low line) At DX Engineering, we bring you only the best - Astron Linear Power Supplies do not disappoint! For reliability and convenience, look to Astron Power Supplies from DX Engineering.
( 128 )
$90.91
—
$99.95
ICOM AD-55 R8600 DC Power Supplies
ICOM AD-55 R8600 DC Power Supplies provide the clean, efficient, and QUIET DC power for your ICOM R8600 receiver. These switching power supplies deliver highly-regulated 15 V DC to the receiver. Internal and external filtering limits the switching noise that can interfere with received signals. By paying special attention to power supply design, ICOM engineers ensure that your R8600 receiver may operate to its full design specifications. If you plan to use your R8600 with a transmitter, AD-55 supplies are also designed to resist RFI. For the ultimate in power supply portability for your R8600 receiver, order ICOM AD-55 DC Power Supplies from DX Engineering!
( 4 )
$95.99
Astron Battery Backup Modules
These Astron Corporation Battery Backup Modules are wonderful power supply accessories! They switch your load to a backup battery upon power supply failure--automatically! These modules also use your power supply to charge wet or SLA standby batteries in either 12 or 24 volt systems. Fuses on the battery side provide protection during charge and discharge. A front panel LED is used to indicate full, discharging, or charging conditions for your batteries. Maximum battery load is 30 amps and maximum charging current is limited at 3.6 amps. These modules are very compact at 1.5 lbs. and just 3.8 in. x 4.5 in. x 1.93 in.! Order your Astron Corporation Battery Backup Modules from DX Engineering and back up those power supplies!
( 8 )
$93.95
Bioenno Power SC-4830JUD Solar Charge Controllers
Bioenno Power SC-4830JUD Solar Charge Controllers are versatile controllers designed for use in solar systems to charge LiFePO4 (Lithium Iron Phosphate), AGM* (Absorbent Glass Mat) and SLA* (Sealed lead Acid) batteries. These Solar Charge Controllers accept either 12V, 24V, 36V, or 48V input from solar panels and can handle up to 30 Amps. Proprietary CC/CV (Constant Current/Constant Voltage) circuitry provides a regulated voltage output for charging 12, 24, 36, or 48 VDC LiFePO4, AGM and SLA batteries. The SC-4830JUD Solar Charge Controller provides a regulated 12, 24, 36, or 48 VDC output for electrical loads depending on whether a 12, 24, 36, or 48 VDC battery is used). A Solar Charge Controller is required for all solar systems to maintain a regulated output voltage to charge batteries and for maintaining a regulating output voltage for loads. The LCD display provides a visual presentation of the usage status of your solar system.
( 2 )
$69.90
Bioenno Power SC-122420NE MPPT Solar Charge Controllers
Bioenno Power SC-122420NE MPPT Solar Charge Controllers are state-of-the-art MPPT (Maximum Power Point Tracking) Solar Charge Controllers designed for installations requiring zero compromises. The SC-122420NE features a 20A maximum load current and is designed to work with LiFePO4 (Lithium Iron Phosphate) batteries and can also be used with AGM and SLA batteries. The SC-122420NE Solar Charge Controllers use a proprietary CC/CV (Constant Current/ Constant Voltage) and MPPT (Maximum Power Point Tracking) circuitry to ensure maximum compatibility and performance with Bioenno Power batteries. The built-in LCD display provides a visual presentation of the usage status of your solar system. The SC-122420NE boasts cutting-edge performance parameters, flexibility and modular capabilities with high aftermarket compatibility with most batteries and solar panels for fixed installation applications.
( 1 )
$89.99
Samlex Battery Backup Modules
Samlex Battery Backup Modules are connected to the output of a power supply and a battery to provide automatic battery backup capabilities. When the AC power fails, these silent, solid-state modules instantaneously switch the DC power connection of your electronic devices from the power supply to the battery, keeping your essential DC powered electronics working! While the AC power is on, these modules regulate the DC power supply output voltage and current to recharge the backup batteries while supplying the DC load. There are no relays to fail and no contacts to clean. Functional from well under 12 Vdc up to 28 Vdc, and capable of handling 25A or 100A output depending on model, these units are used to create uninterruptible power supplies that are used in essential communications, automotive, marine, RV, aviation and other applications. Especially well-suited for Emergency Communications and in generator powered systems, and anywhere AC to DC supplies provide crucial power service, Samlex Battery Backup Modules from DX Engineering will keep your electronics up and running!
( 7 )
$88.70
12 Volt Power, Inc. DC-to-DC LiFePO4 Battery Chargers
12 Volt Power, Inc. DC-to-DC LiFePO4 Battery Chargers are versatile DC-to-DC chargers specifically designed for charging 12V LiFePO4 (LFP) batteries using your vehicle's 12V system. They feature a broad input voltage range of 8-36VDC, allowing for the use of various power sources and offers user-selectable charging amperage, making it suitable for batteries ranging from 3Ah to over 70Ah.
( 2 )
$69.99
Bioenno Power BLF-1208LB LiFePO4 Batteries
Bioenno Power BLF-1208LB LiFePO4 Batteries are a completely sealed 12V 8 Ah battery based on state-of-the-art Lithium Iron Phosphate electrodes. This battery is useful for e-bikes, e-scooters, solar, Amateur Radio, electronics, energy storage, and many other applications. This battery has a built-in PCM/BMS (protection circuit module/battery management system) which provides complete protection and balancing of the internal cells in the battery as well as protection from over current, under voltage (over-discharge) and over-voltage. A compatible 110/220 VAC 2A AC to DC charger with Alligator Clips is available separately.
Not Yet Reviewed
$94.99
West Mountain Radio RIGrunner DC Outlet Panels
Get rid of that power-supply rat's nest with West Mountain Radio RIGrunner DC Outlet Panels! You'll enjoy having a RIGrunner, with its durable, standardized Anderson Powerpole connections. Properly organized DC distribution will make a long-overdue improvement to the convenience and safety of your Amateur Radio station. Think of a RIGrunner as the 12 volt equivalent of an AC power panel in your home. Their quick-disconnect feature makes them truly convenient! RIGrunners are available with four to 12 outlets. Fused input currents are 40 or 80-amps, depending on the model. All are capable of handling up to 40 amps of total output current! Each RIGrunner DC outlet is individually fused for ultimate protection! Some RIGrunners also provide advanced features, such as automatic power-on detection, USB charging ports, DC-power monitoring indicators, programmable automatic trip points, and Internet reporting and control. You say you need 24 or 48 volt DC power distribution? No problem! RIGrunners are available to provide those voltages ... and even 48 volt NEGATIVE polarity! Note: For additional product information, please look at the files under the "Documentation" tab. Eliminate the DC power distribution problems in your operation BEFORE they happen! Order your West Mountain Radio RIGrunner DC Outlet Panels from DX Engineering...today!
( 100 )
$79.95
—
$94.95