Availability
DC Power
Summit Racing™ Premium Battery Boxes
If your headlights dim when you transmit with that 500 watt mobile HF amplifier, you may need an extra battery and one of our Summit Racing® Premium Battery Boxes! These battery boxes offer solid protection for auxiliary batteries and an extra battery to provide the reserve power that mobile amplifiers often need. These sealed-type plastic boxes protect your auxiliary battery from moisture, dirt, and debris, while the vent-tube expels battery gasses from the box to prevent buildup. In-cab or in-trunk mounting is possible if proper vent-tube installation is followed. You customize each battery box for each vehicle application by drilling the battery box for cable and vent-tube access. Inside dimensions are approximately: L- 10.75 in.; W - 8.5 in.; H- 9 in. They are available in red or black finishes and include mounting hardware. What more could you ask? Give your auxiliary battery extra protection and reduce under-hood clutter with these premium battery boxes. Call DX Engineering today to get one of your own Summit Racing® Premium Battery Boxes and keep those headlights bright!
Not Yet Reviewed
$93.99
Deltran Battery Tender Plus Systems
Deltran Battery Tender Plus systems are designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Features include: * Quick-connect harness for hard-to-reach areas * Temperature compensated to ensure optimum voltage according to ambient temperature * Automatic switching from full charge to floating mode * Reverse polarity protection * Complete 3-step charging program (Bulk Charge, Absorption Mode, Float Mode) * 10-year warranty
( 1 )
$58.99
NOCO GENIUS10 Smart Battery Chargers
The NOCO GENIUS10 smart battery chargers are fully automatic and easy to set up for worry-free charging. Simply plug-in, connect to the battery, select a charge mode, and start charging your battery. An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates or under-charging in cold climates. The GENIUS10 charges dead batteries as low as 1-volt. Or use the all-new Force Mode that allows you to take control and manually begin charging dead batteries down to zero volts. These chargers also detect sulfation and acid stratification—and restore lost performance for stronger engine starts and extended battery life. The GENIUS10 smart chargers are compatible with 6 V and 12 V lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.
Not Yet Reviewed
$99.99
NOCO GENIUS5 Smart Battery Chargers
The NOCO GENIUS5 smart battery chargers are fully automatic and easy to set up for worry-free charging. Simply plug-in, connect to the battery, select a charge mode, and start charging your battery. An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates or under-charging in cold climates. The GENIUS5 charges dead batteries as low as 1-volt. Or use the all-new Force Mode that lets you take control and manually begin charging dead batteries down to zero volts. These chargers also detect sulfation and acid stratification—and restore lost performance for stronger engine starts and extended battery life. The GENIUS5 smart chargers are compatible with 6 V and 12 V lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, maintenance-free, and lithium-ion batteries.
Not Yet Reviewed
$69.95
Deltran Two Bank Battery Tender Charging Stations
The Two Bank Battery Tender Charging Stations are two encased 1.25 amp battery chargers. They're designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. These chargers will operate anywhere in the world! Choose between the three global regions: Continental Europe, Japan, and USA/Western Hemisphere.
( 2 )
$99.99
Deltran Battery Power Tender Plus Systems
Deltran Battery Power Tender Plus systems are designed for either portable operation or permanent mounting. They will charge and maintain both flooded and sealed, maintenance-free, AGM, and lead acid batteries. Features include: * Water-resistant * Shock and vibration-resistant * Lightweight construction less than 4 lbs. * Microprocessor-controlled BTP technology * Reverse polarity protection * Complete 4-step charging system (Initialization, Bulk, Absorption, Float & Maintenance) * 2-year warranty
( 1 )
$99.99
Bioenno Power BLF-1209A LiFePO4 Batteries
Bioenno Power BLF-1209A LiFePO4 Batteries are state-of-the-art 12V 9 Ah Lithium Iron Phosphate batteries featuring the smallest form factor Bioenno Power has to offer. These batteries are small, lightweight and extremely compact and they are ideal for portable low power consumption applications. The integrated PCM (Protection Circuit Module) provides complete internal cell balancing and management, protection from over current, under voltage (over-discharge), over-voltage, and short-circuiting and includes integrated charging circuitry. Enjoy quiet EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) free performance, order a Bioenno Power BLF-1209A LiFePO4 Battery from DX Engineering.
( 3 )
$99.99
JOES Racing Products 4-Terminal Battery Disconnect Switches
Whether you have an emergency situation that requires an immediate shutdown, or you just want to prevent various accessories from draining the power source (your battery) when your vehicle is not use, JOES Racing Products 4-terminal battery disconnect switches can come to your rescue. The back of these units are treated with rubber sealant to keep out dirt and moisture to offer long service. They're designed for vehicles equipped with an alternator, and are engineered to close off the electrical current flowing from your battery in an instant with just a twist of the dial. You won't realize how valuable these 4-terminal battery disconnect switches actually are ... until you need to use them!
Not Yet Reviewed
$54.99
Bioenno Power SC-122420NE MPPT Solar Charge Controllers
Bioenno Power SC-122420NE MPPT Solar Charge Controllers are state-of-the-art MPPT (Maximum Power Point Tracking) Solar Charge Controllers designed for installations requiring zero compromises. The SC-122420NE features a 20A maximum load current and is designed to work with LiFePO4 (Lithium Iron Phosphate) batteries and can also be used with AGM and SLA batteries. The SC-122420NE Solar Charge Controllers use a proprietary CC/CV (Constant Current/ Constant Voltage) and MPPT (Maximum Power Point Tracking) circuitry to ensure maximum compatibility and performance with Bioenno Power batteries. The built-in LCD display provides a visual presentation of the usage status of your solar system. The SC-122420NE boasts cutting-edge performance parameters, flexibility and modular capabilities with high aftermarket compatibility with most batteries and solar panels for fixed installation applications.
( 1 )
$89.99
Summit Racing™ Fuse Blocks
Add additional circuits the quick and easy way with our Summit Racing™ fuse blocks. They're available in different styles with different options to suit your specific application requirements.
Not Yet Reviewed
$51.99
—
$88.99
Samlex Rack Plates
Samlex Rack Plates are available separately, for mounting SEC Series power supplies in a rack. These handsome powder-coated steel rack mounts hold desktop power supplies in the proper position and have cutouts for their bottom mounted fans. Rack mount features: * Ultra Heavy Gauge Steel; will not bend or deform * Black powder coated finish is scuff resistant * Precision cut mounting slots for quick, easy and secure mounting * Vent slots allow unobstructed air flow from Power Supply cooling fans
( 1 )
$54.00
—
$69.00
Clearance
Astron Power Supplies
When you are in need of reliable DC power supply, look no further than Astron Power Supplies. This line of linear DC power supplies are made of heavy-duty, high-quality materials. Astron has your power requirements covered with a wide variety of voltage and amperage outputs and case styles with and without meters. Even their power supplies with only cigarette lighter sockets or with Anderson Powerpoles on the front panel still have DC output terminals on the rear panel. That's convenient! Astron linear-type transformer power supply features include: * Solid state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L * Tight regulation and low ripple at low line input voltage * Heavy-duty heat sink (70A models add a low noise fan) * Three conductor power cord * All metered units feature backlit meters At DX Engineering, we bring you only the best - Astron Power Supplies do not disappoint! Performance specifications: * Input Voltage: Most models are built for 105 to 125 VAC input. Some "220" models are built for 210-250 VAC input. * Output Voltage: As Listed * Ripple less than 5 mv peak to peak (full load and low line) At DX Engineering, we bring you only the best - Astron Linear Power Supplies do not disappoint! For reliability and convenience, look to Astron Power Supplies from DX Engineering.
( 128 )
$106.95
$85.56
—
$99.95
Samlex Battery Backup Modules
Samlex Battery Backup Modules are connected to the output of a power supply and a battery to provide automatic battery backup capabilities. When the AC power fails, these silent, solid-state modules instantaneously switch the DC power connection of your electronic devices from the power supply to the battery, keeping your essential DC powered electronics working! While the AC power is on, these modules regulate the DC power supply output voltage and current to recharge the backup batteries while supplying the DC load. There are no relays to fail and no contacts to clean. Functional from well under 12 Vdc up to 28 Vdc, and capable of handling 25A or 100A output depending on model, these units are used to create uninterruptible power supplies that are used in essential communications, automotive, marine, RV, aviation and other applications. Especially well-suited for Emergency Communications and in generator powered systems, and anywhere AC to DC supplies provide crucial power service, Samlex Battery Backup Modules from DX Engineering will keep your electronics up and running!
( 7 )
$88.70
Astron Battery Backup Modules
These Astron Corporation Battery Backup Modules are wonderful power supply accessories! They switch your load to a backup battery upon power supply failure--automatically! These modules also use your power supply to charge wet or SLA standby batteries in either 12 or 24 volt systems. Fuses on the battery side provide protection during charge and discharge. A front panel LED is used to indicate full, discharging, or charging conditions for your batteries. Maximum battery load is 30 amps and maximum charging current is limited at 3.6 amps. These modules are very compact at 1.5 lbs. and just 3.8 in. x 4.5 in. x 1.93 in.! Order your Astron Corporation Battery Backup Modules from DX Engineering and back up those power supplies!
( 8 )
$93.95
Paradan Radio Mobile Lithium Battery Chargers
Paradan Radio Mobile Lithium Battery Chargers utilize any cigarette lighter/accessory power socket in a car, truck, or boat to charge 12V LiFePO4 (Lithium Ferrous Phosphate) batteries. The vehicle's 12V volt system is converted into 14.2V while limiting the current to 3 amps. The bright red LED meter displays the battery's voltage and the charging amperage and when fully charged, the current reads close to zero and the battery's float voltage is then displayed. Two output wires and included, one with a Powerpole ® plug and one with a DC Barrel power plug. BOTH wires connect internally to the charger's output. Equipment may be powered using the Powerpole plug, while the battery is being charged via the 6mm plug. The charger is housed in a sturdy aluminum case and the accessory power plug includes a 5A fuse for protection. Additional Features and Specifications: * Input DC Voltage: 11-14.6 VDC * Output Voltage: 14.2 VDC when not current limited. (+-1%} * Output Current: 3A Max during bulk charging (+-5%) * Battery: Use with any 12-volt LiFePO4 Battery * Input Wire: 6 ft. Accessory Power Plug with 5A Fuse * Output Wires: 1 - 1 ft. length with a 5.5mm DC Barrel male plug, 1 – 1 ft. length with Powerpole© connectors * Case: Black painted cast aluminum, white printing, * Dimensions: 4.75 x 2.50 x 1.40 in. * Weight: 1.00 lb.
( 7 )
$100.00
SOTAbeams Fuser 6 DC Distribution Boxes
SOTAbeams Fuser 6 DC Distribution Boxes are the lightest PowerPole® distribution boxes… by far! SOTABEAMS PowerPole® Fuser-6 boxes make light work of connecting five accessories to your power source (they have one input and 5 outputs). All of the connectors are individually fused. In a typical shack you might have a 100 Watt HF radio, a 50 watt 2m FM radio, an antenna tuner and a QRP rig all connected to your Fuser-6 - and still have a spare connector! Fuser-6 boxes are supplied with three 25 Amp and three 5 Amp fuses. Standard automotive blade fuses make replacement easy - these are widely available with values from 1 to 30 Amps. Fuser-6 units incorporate a polarity warning system; lights GREEN for CORRECT and RED for REVERSE. It's handy when you have a battery connected to the system to help avoid damage to your equipment if you accidentally get the battery connections reversed. Fuser-6 internal circuitry is rated at 25 Amps (30 Amp surge); no mean feat for a PCB design. To achieve SOTAbeams had to use a special PCB with double weight copper. They also use a clever design to further improve the current handling: ultra-wide copper tracks are used on both sides of the board. The boards are then roller tinned (on both sides) to reduce the resistance and handle heat even better. They use plated through holes, carefully located to ensure an even current distribution between each face of the board. Of course, Fuser-6 boards use genuine Anderson PCB contacts for lower contact resistance and improved reliability. NOTE: For best kit results use a soldering iron of at least 50 Watts. Additional flux is also helpful to ensure a good result. Additional details: * 25 Amps continuous, 30 Amps surge (adjacent connectors) * 1 input, 5 outputs * Power Bus resistance typically less than 1.80 milliohms end to end * Weight 135 g (less than 5 oz.) * W 68 x L 130 x H 40 mm (excluding connectors) 2.75 x 5 x 1.6 in. Whether you use one for your go kit, QRP setup or for use in the shack, these SOTAbeams Fuser 6 DC Distribution Boxes from DX Engineering are a handy DC power solution.
( 5 )
$69.99
—
$85.99
Bioenno Power BLF-1209WS LiFePO4 Batteries
Bioenno Power BLF-1209WS LiFePO4 Batteries are state-of-the-art 12V 9Ah Lithium Iron Phosphate batteries that feature an ABS-sealed case that is ideal for extreme use cases such as powering critical avionics on sail planes, e-bikes, e-scooters, audiovisual, radio communications and more. The integrated PCM (Protection Circuit Module) provides complete internal cell balancing and management, protection from over current, under voltage (over-discharge), over-voltage, and short-circuiting and includes integrated charging circuitry. Enjoy quiet EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) free performance, order a Bioenno Power BLF-1209WS LiFePO4 Battery from DX Engineering.
Not Yet Reviewed
$99.99
West Mountain Radio N8XJK Booster Remote
West Mountain Radio's N8XJK Booster remote control and monitor unit is designed for the N8XJK Super Booster. This compact remote head monitors input/output voltage, as well as error conditions like over-voltage and overheating. The remote allows the booster unit to be turned on/off from a remote location as well as forcing the boost function on and off. The remote unit also keeps track of your lowest input voltage and highest output voltage. Included is a disk magnet to help in mounting.
( 1 )
$69.95
ICOM BC-267 IC-7760 and RC-7760 AC Adapters
ICOM IC-7760 and RC-7760 ACAdapters are the same as the adaptors supplied with the IC-7760 and RC-7760. This Adapter will allow you to have a second adaptor to either replace one that came with the radio or just have a spare on hand if you move the RC-7760around and the adapter is in a hard to reach spot. Additional Feature and Specifications: Output Voltage: 15V DC Connector: 5.5mm x 2.1 mm x 10 mm Cable Length: 5.9ft (1800mm)
Not Yet Reviewed
$98.99
West Mountain Radio RIGrunner DC Outlet Panels
Get rid of that power-supply rat's nest with West Mountain Radio RIGrunner DC Outlet Panels! You'll enjoy having a RIGrunner, with its durable, standardized Anderson Powerpole connections. Properly organized DC distribution will make a long-overdue improvement to the convenience and safety of your Amateur Radio station. Think of a RIGrunner as the 12 volt equivalent of an AC power panel in your home. Their quick-disconnect feature makes them truly convenient! RIGrunners are available with four to 12 outlets. Fused input currents are 40 or 80-amps, depending on the model. All are capable of handling up to 40 amps of total output current! Each RIGrunner DC outlet is individually fused for ultimate protection! Some RIGrunners also provide advanced features, such as automatic power-on detection, USB charging ports, DC-power monitoring indicators, programmable automatic trip points, and Internet reporting and control. You say you need 24 or 48 volt DC power distribution? No problem! RIGrunners are available to provide those voltages ... and even 48 volt NEGATIVE polarity! Note: For additional product information, please look at the files under the "Documentation" tab. Eliminate the DC power distribution problems in your operation BEFORE they happen! Order your West Mountain Radio RIGrunner DC Outlet Panels from DX Engineering...today!
( 100 )
$79.95
—
$94.95
Samlex Base Station Radio Cabinets
Samlex America Base Station Radio Cabinets provide a convenient and attractive housing for your base radio or control station and mating power supplies. Featuring housing for Motorola, Kenwood, Vertex, ICOM, Harris, and others, these cabinets are sized to accept your choice of radio and Samlex America power supply. With easy radio and power supply installation, the result is a unified package functioning as a desktop unit! These Samlex cabinets feature high-quality steel construction for durability and long life. Note: For additional product information, please look at the files under the "Documentation" tab. Even if you already have the radio and power supply, order one of these Samlex America Base Station Radio Cabinets from DX Engineering to integrate your equipment... do it today!
( 7 )
$52.80
—
$52.99
Samlex DC/AC Modified Sine Wave Power Inverters
Samlex America DC/AC Modified Sine Inverters are ideal for powering tools, water and air pumps, incandescent lighting systems, and kitchen appliances from your car, truck, boat, RV, solar energy system, or battery bank. Use them anywhere that does not require a "pure" sine wave. Generally speaking, modified sine wave inverters are more economical than their "pure" sine wave counterparts. Whether you are looking for a tiny 100 Watt inverter or a substantial 3,000 Watt unit, you'll find that the lineup of economical Samlex America DC/AC Modified Sine Inverters has just the right product to suit your needs!
Not Yet Reviewed
$74.80
—
$89.90
Bioenno Power SC-4830JUD Solar Charge Controllers
Bioenno Power SC-4830JUD Solar Charge Controllers are versatile controllers designed for use in solar systems to charge LiFePO4 (Lithium Iron Phosphate), AGM* (Absorbent Glass Mat) and SLA* (Sealed lead Acid) batteries. These Solar Charge Controllers accept either 12V, 24V, 36V, or 48V input from solar panels and can handle up to 30 Amps. Proprietary CC/CV (Constant Current/Constant Voltage) circuitry provides a regulated voltage output for charging 12, 24, 36, or 48 VDC LiFePO4, AGM and SLA batteries. The SC-4830JUD Solar Charge Controller provides a regulated 12, 24, 36, or 48 VDC output for electrical loads depending on whether a 12, 24, 36, or 48 VDC battery is used). A Solar Charge Controller is required for all solar systems to maintain a regulated output voltage to charge batteries and for maintaining a regulating output voltage for loads. The LCD display provides a visual presentation of the usage status of your solar system.
( 2 )
$69.90
Bioenno Power Battery and Charger Combos
Bioenno Power Battery and Charger Combos allow you to experience unmatched convenience and worry-free compatibility in one package. We've taken the guesswork out of selecting a Bioenno battery and a compatible charger. Power Up with Ease and Order a Bioenno Power Battery and Charger Combo from DX Engineering.
( 7 )
$71.98
—
$86.98