Availability
Grounding and Lightning Protection
Diamond Antenna SP-Series Lightning Arresters
Lightning is every radio operator's nemesis; professional or amateur. During the lightning season every spring and summer, these Diamond Antenna SP-Series Lightning Arresters save many pieces of ham equipment around the world! These arresters are available with several coaxial connection schemes and with multiple RF power ratings. They're designed to pass DC current, so you can install these arresters in-line with external devices requiring coaxial DC power-feed. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. To protect your precious radio equipment, you need quality lightning protection. Then, when the thunder-boomers approach, you can sit back, relax, and let these Diamond Antenna SP-Series Lightning Arresters take the hit for you!
( 21 )
$31.99
—
$41.99
DX Engineering Tinned Copper Braid Assemblies
DX Engineering Tinned Copper Braid Assemblies are typically used for the proper grounding of individual pieces of electrical or electronic equipment to a common grounding bus, such as a copper strap or a thicker bus bar. DX Engineering tinned copper braid assemblies are used for industrial, commercial, and broadcasting applications inside of electrical racks, for the connection of sub-assemblies to a metal chassis or grounding point, and for any special application where a high-quality tinned copper braid assembly is required. Our assemblies are made with top-quality tinned copper braid of various widths and lengths, and most are terminated with machine-crimped and hand-soldered terminals. Some assemblies feature heat shrink tubing over the connections for strain relief and longevity. Be confident with your equipment and system grounding with the best--DX Engineering Tinned Copper Braid Assemblies.
( 91 )
$23.99
—
$31.99
DX Engineering 75 ohm Coaxial Lightning Surge Protectors
DX Engineering 75 ohm Coaxial Lightning Surge Protectors feature a unique design that is impedance-matched to 75 ohms and are virtually transparent to all analog or digital bi-directional signals from DC to 1.0 GHz. Manufactured by Tii Network Technologies for DX Engineering, their patented proprietary coaxial gas tube surge protectors are equipped with an integral failshort mechanism for a power-cross condition, which shunts both the coaxial cables' center conductor and sheath for a common path to ground. The dc breakdown voltage of the protector provides superior protection against transient surges, and yet is compatible with network-powered applications. They may also be used in 75-ohm receive systems up to 1.0 GHz. The protection element is designed to reset after each over-voltage event and the metallic housing of the coaxial lightning surge protectors provides necessary EMI shielding. When properly connected, DX Engineering Coaxial Lightning Surge Protectors are environmentally sealed (15 psi) to prevent the ingress of moisture and humidity encountered in broadband pedestals, vaults and stand-alone receive antenna applications. Full 360 degree Type F connectors provide superior RF performance and tighter connections.
( 8 )
$29.99
ERICO Ground Rods
Many hams are misinformed about the importance of proper grounding. It's paramount for safety and station efficiency to have an excellent grounding system. In any grounding system, the ground electrode provides the physical connection to the Earth and is the essential instrument used to dissipate current. ERICO Ground Rods provide the superior Earth connections you need! ERICO has decades of experience and offers a complete line of ground rods to meet Amateur Radio and industry needs. ERICO Ground Rods have these great features: * 99.9 percent pure electrolytic copper coating * Manufactured of high strength 1018 cold drawn steel * Specifically manufactured to work with other ERICO/CADWELD products, like ONE SHOT * Molecular bond to nickel-sealed high strength steel core * Copper coating will not crack when bent or tear when driven * Rods have a high carbon steel core and tip that provide superior strength when driving * Resist corrosion better than galvanized rods allowing for approximately 30-year service life in most soils * Minimum tensile strength of 80,000 psi and straightness tolerance of .010 in. per linear foot * State of the art manufacturing process helps ensure uniform plating thickness * ERICO name, length, diameter and part number is roll-stamped within 12 in. (304.8 mm) of chamfered end * UL logo and control number where applicable stamped on each rod for easy inspection after installation * Minimum copper coating of 10 mils on Rods Listed To Meet UL 467 * Exceed the requirements of ANSI®/UL® 467, CSA, and ANSI/NEMA GR-1 ERICO Ground Rods are a vital part of your station and antenna grounding systems. These superior ground rods will guarantee an efficient Earth ground and enhance your station's safety and efficiency. Order your ERICO Ground Rods from DX Engineering!
( 27 )
$22.59
—
$46.09
DX Engineering Coaxial Connection Weatherproofing Kits
DX Engineering Coaxial Connection Weatherproofing Kits provide two types of 3/4 inch tape, sealing and vinyl, that provide the right combination of reliable protection for your coaxial connections. This method provides an inexpensive water moisture and UV barrier that is fully capable for a long term installation, but is also easily and cleanly removed for maintenance. Taping, and subsequent removal and re-taping is accomplished quickly and easily with these tape kits. Each weatherproofing kit each contains two tapes; one roll of 3M Temflex™ 2155 Rubber Splicing Tape TES-2155, a conformable, self-fusing sealing tape as the water barrier, and one roll from three different grades of 3M Vinyl Electrical Tape for a UV barrier. Choose from Scotch Supper 88 Premium, Scotch Super 33 Plus or economy 3M Tartan 1710. Each kit will weatherproof six to ten double connections, depending upon the number of overlapping layers used. Select the kit below with the vinyl tape grade desired. Choose the economy kit for temporary weather protection and one of the professional grade tape kits for the long-term installation. The other type connector weather sealing that is a tar like substance is excellent for permanent commercial installations that are not intended to require removal. Instead, these tape kits also prevent water or condensation from entering your coaxial cable. They are perfect for the amateur, antenna experimenter or professional. Don't let water ruin your temporary or permanent coaxial connections. Moisture ingress could lead to damaged coax and corroded connections and cause high SWR conditions or shorts that could damage your equipment. Order DX Engineering Coaxial Connection Weatherproofing Kits to get those cable connectors sealed and plan for easy weatherproofing removal for future maintenance.
( 18 )
$20.98
DX Engineering Coax Grounding Brackets
DX Engineering Coax Grounding Brackets are designed to provide additional grounding of coaxial cable shields. They are manufactured from high-quality stainless steel and are supplied with a stainless steel V-bolt and hardware for fastening them to tower legs. There are two sizes available to fit most tower legs or antenna masts. These brackets have holes for two optional UHF bulkhead connectors; two UHF chassis mount connectors, or two Type-N bulkhead connectors. DX Engineering Coax Grounding Brackets may be used on the tower top junction point for the flexible antenna coax jumpers (often used to form a rotor loop), and the main runs down the tower leg. They are also useful at the base of the tower to provide a solid grounding point before the coax cable is routed away from the grounded tower. While the brackets have serrated teeth to bite through paint and corrosion, there is an additional hole in them so that an optional ground braid or copper strap may be extended for secure grounding. Bulkhead and chassis mount connectors are sold separately. NOTE: Due to the close mounting of the RF connectors closest to where the tower leg or metal pipe may be, some users have suggested to first make the connections weather-tight, then attach the bracket to the tower leg or metal pipe. Get your coaxial shields grounded with DX Engineering Coax Grounding Brackets!
( 20 )
$21.99
—
$22.99
DX Engineering Weatherproofing Kits
DX Engineering Weatherproofing Kits weatherize your outdoor connections and prevent moisture entry and corrosion with vapor wrap and high quality electrical tape. When your non-weather resistant equipment needs to be mounted outdoors, these weatherproofing kits provide needed protection. Use these kits to protect lightning protectors, coaxial connections, antenna joints, steel hardware, junction boxes and just about anything you can wrap with tape by using these kits. The non-conductive malleable vapor wrap sealant is water-impermeable and withstands temperatures from minus 65 degrees F to plus 180 degrees F without cracking. Choose from Standard, Upgraded or Ultimate kits with different grades of vinyl tape. The WK-PRO Kit has more vapor wrap material and five rolls of tape for large projects. See each kit's detailed description. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Reliable waterproofing is important to protect equipment and cable connections from damage caused by moisture penetration. Protect your equipment, handle extreme temperatures, and remain unaffected by water and UV sun rays with DX Engineering Weatherproofing Kits.
( 18 )
$20.99
—
$23.99
ERICO CP34 Bronze Ground Rod Clamps
ERICO CP34 Bronze Ground Rod Clamps are traditional compression clamps that connect a bare conductor in parallel to your ground rod. You may use conductor sizes from 10 AWG solid up to 1/0 stranded. Designed to fit 0.5 to 0.75 copper-clad ground rods, these silicon-bronze clamps will last for years and years. Every shack needs a good station ground. Order ERICO CP34 Bronze Ground Rod Clamps from DX Engineering to ensure an effective ground at your station!
( 1 )
$32.59
ERICO CADWELD ONE SHOT Wire to Ground Rod Clamps
ERICO CADWELD ONE SHOT Wire to Ground Rod Clamps produce a non-removable, permanent, exothermic connection to a ground rod that will not loosen, corrode or increase in resistance for the life of the installation. They are not clamps, but replace a clamp with a welded connection that thermally fuses the wire to the ground rod. ONE SHOTs include convenient, single-use (one shot) ceramic molds that eliminate the need for handle clamps and/or frames. These exothermic connections are ideal for threaded or non-threaded copper-bonded steel, galvanized or stainless steel ground rods. ERICO CADWELD ONE SHOTs are also: * NEC compliant, cULus Listed * Rural Utilities Service (RUS) accepted CADWELD ONE SHOTs have been used for making permanent and reliable connections to ground rods for telecommunications, broadcast stations, cable television applications and electrical transmission and distribution. Builders in those applications have long known the value and quality of CADWELD systems. Any outdoor connection made by mechanical clamping methods begins to degrade from day one. Since World War II, CADWELD has provided the industry standard against which all other ground connections are measured. No invention or innovation has proved to be better. Now you may use CADWELD ONE SHOTs to ensure the best, most reliable and superior ground connection for your Amateur Radio station! Note: The use of these products generates extreme heat. Please follow all ERICO CADWELD instructions carefully to ensure safe and successful application of their product. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the ultimate in grounding solutions choose ERICO CADWELD ONE SHOT Wire to Ground Rod Clamps, now available from DX Engineering!
( 26 )
$22.65
—
$39.75
Times Microwave Systems® Mid-span Coaxial Grounding Kits
Times Microwave Systems Mid-span Coaxial Grounding Kits let you ground the coaxial shield to any convenient location with a ground lug. This includes most grounding clamps, plates and fixtures. For towers, an additional tower leg clamp is usually required. After stripping the outer jacket with a mid-span stripping tool, a pre-formed metal strap is applied to the braid/shield and tightened down. This strap is then electrically and mechanically connected to the ground source with a ground lead assembly, providing an excellent ground for the shield. These mid-span shield-grounding kits include: (1) Pre-formed tinned copper ground strap (1) Ground lead assembly (2) 1/4 in. brass lock-washers (2) 1/4 in. brass nuts (1) Roll 2-1/2 in. x 24 in. (610mm) butyl mastic (1) Roll 3/4 in. x 20 ft. (6.1m) PVC tape (1) Heat shrink tube (1) Field-crimp 3/8 in. 2-hole lug (2) 3/8 in. x 1-1/4 in. slotted bolts (2) 3/8 in. lock-washers (2) 3/8 in. nuts (2) 3/8 in. flat-washers (1) Detailed assembly instructions Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Their included weatherproofing materials provide long-lasting environmental protection to help maintain a reliable ground for your coax. Shop DX Engineering for Times Microwave Systems Mid-span Coaxial Grounding Kits! LMR® is a registered trademark of Times Microwave Systems.
( 4 )
$34.65
—
$45.99
DX Engineering Copper Cleaning Kits
DX Engineering Copper Cleaning Kits help you ensure a low-impedance bond. Properly cleaned and prepped copper ground connections are essential to maintaining the low-resistance properties of the strap connection. DX Engineering Copper Cleaning Kits have everything you need to establish the bond! Cleaning kits include: * Scotch-Brite abrasive scrub pad * Loctite anti-seize copper anti-oxidant lubricant paste * Finger towlettes for cleanup * Instructions included Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Don't try to bond through corrosion or surface patina. Use DX Engineering Copper Cleaning Kits and get a low impedance, solid bond!
( 3 )
$32.99
Georgia Copper Flexible Ground Strap Jumpers
Georgia Copper Flexible Ground Strap Jumpers are excellent for low impedance outdoor grounding and HF antenna feedpoint and radial system connections. Even weathered to a dull patina, copper strap does not lose its low impedance advantages over wire or cables, for DC and AC through HF and VHF. Plus, flexible copper strap is far superior to tinned copper braid, which holds moisture and disintegrates which causes a undesirable increase in connection impedance over a relatively short time. Flexible SOLID Copper Strap Jumpers come in pre-cut lengths at 1 in. or 3/4 in. widths and 0.022 in. thickness, punched with 0.280 in. holes at each end, to accommodate 1/4 in. bolts. They're available in two-packs at six different lengths, 6 in., 12 in., 24 in., 36 in., 48 in., 72 in. and also in a variety pack that contains one piece of all six lengths. Order and use any of these specific length straps for your project. Or, use your tin snips and your imagination to make all types of low impedance connections for surge protection grounding boxes and panels, protectors, equipment racks, vertical antenna feedpoints, radial system connections and antenna feedpoint connections from a bolt terminal balun to the driven elements. This pre-cut copper strap may also be used as a shack ground bus or for the bus bar connection to the station ground rod or rods. Hobbyists and Electricians order extra copper straps to have on hand and be ready for those grounding and antenna connection projects that come up. Georgia Copper Ground Strap Jumpers are here at DX Engineering, ready for your needs.
( 10 )
$21.99
—
$49.99
DX Engineering Grounding Clamps
DX Engineering Grounding Clamps are used to connect wire grounding conductors of AWG 2 through 10 to a ground rod, tower leg or grounded pipe. These clamps are manufactured from cast bronze, a highly conductive copper alloy, and include high quality 1/4-20 stainless steel screws for maximum longevity and durability. These clamps also accept the stud from our IS-RCT control line protectors, to provide the proper protection of rotator control lines at the base of a grounded tower. Please note that pipe is measured by ID, not OD. For example, 1-1/4 pipe is much larger than 1-1/3 in. OD. DX Engineering Grounding Clamps are available in two sizes, to fit your grounding project. These are great general purpose grounding clamps to have on hand for future projects, so add a few to your order today!
( 8 )
$45.99
DX Engineering Copper Strap Bonding Clamps
DX Engineering Copper Strap Bonding Clamps are used for easy, mechanical attachment of grounding conductors or straps to each other or to ground rods. For your high performance grounding installations, we offer several copper clamp styles. The most popular, copper strap to copper-clad ground rod clamps fit nominal 5/8 through 3/4 in. rod sizes. DX Engineering's strap-to-strap styles bond two copper straps together--perfect for extending an existing run or adding drops to your equipment--and their strap-to-wire style clamps provide a convenient way to bond heavy-gauge copper wire (6 AWG to 1 AWG) to flat copper grounding straps. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. All copper bonding clamps include 18-8 stainless steel hardware. Make a bond for better lightning protection with DX Engineering Copper Strap Bonding Clamps!
( 14 )
$48.99
Georgia Copper Flexible Copper Grounding Straps
Georgia Copper Flexible Copper Straps are solid and bendable metal straps that are used to build low-inductance, high performance grounding systems. The use of these copper straps provides the best grounding systems because they have greater surface area and lower inductance per foot than the equivalent cross-section of wire. Hams find all sorts of uses for copper straps, for superior antenna feedpoint connections as well as creating a bus for grounding. Equipment racks may be bonded to ground using copper straps. Don't rely on the rack frame to provide bonding. Tie all of the power supplies, tuners, racked amplifiers, and other equipment together with low-resistance copper. Especially useful for any application outdoors and for use directly in or near soils, flexible solid copper straps will maintain a proper, low-impedance connection long after small-gauge wires and tinned copper braids have weathered and disintegrated. Copper straps are specified by communications system designers and are used extensively for above-ground and underground connections to radiators, tower and ground rods for commercial equipment rooms, sheds, and tower installations. Professional communications engineers know the value of systems that employ copper straps. They are available in various widths and at a thickness to suite your application. If you are using wire or braid at feedpoint connections or to provide grounding, equipment bonding or other critical connections for your Amateur Radio station, consider upgrading to long-lasting and solid Georgia Copper Flexible Copper Straps from DX Engineering!
( 22 )
$44.99
DX Engineering Ground Bus Hardware Packs
DX Engineering Ground Bus Hardware Packs include the original 24-piece hardware that comes with the DXE-GBWM-W: (4) - 1/4 x 20 hex head stainless steel (4) - 1/4 in.-20 hex nuts (4) - 1/4 in. flat washers (4) - 1/4 in. split washers (4) - 1/4 in. external tooth washers (2) - ring terminals (2)- wire lugs Bus bar mounting hardware is not included due to a variety of mounting surfaces and hardware requirements.
( 1 )
$20.99
Georgia Copper Flexible Copper Sheeting
Georgia Copper Flexible Copper Sheeting makes the best Faraday shields! When you need RF isolation for an amplifier or oscillator stage, copper Faraday shields are most effective. Of course, copper sheeting has many more applications than just shielding. These soft, 100 percent pure copper sheets may be easily cut and formed to fabricate almost anything. Pure copper also accepts solder better than any other metal! You can cut these copper sheets to provide a ground buss, hole covers, high-current jumpers, solder tabs, heat sinks... a myriad of uses! And, don't forget to consider your XYL's crafts! Buy her some soft copper sheeting to use for jewelry, copper enameling, embossing, and sculpturing! Whether your project involves electronics, arts, or crafts, if you need copper, then easy-to-use Georgia Copper Copper Sheets from DX Engineering will be what it takes to get the job done!
( 1 )
$21.99
—
$24.99
ERICO Hammerlock Ground Clamps
ERICO Hammerlock Ground Clamps form an irreversible mechanical connection between the grounding conductor and the ground rod. Machined from highly conductive copper, the state-of-the-art Hammerlock makes a low-resistance connection designed to withstand ground fault currents, lightning transients—and will withstand the full current-carrying capacity of the conductor. The connector's mechanically rugged design provides visual confirmation of a completed connection and will ensure the highest level of performance for many years in the harsh underground environment. ERICO Hammerlock Ground Clamps allow for "T" or pass-through connections, and installation is as easy as swinging a hammer; no special tools or training are required.
( 1 )
$29.79
—
$43.75
DX Engineering Ladder Line Surge Protector Replacement Parts Kit
DX Engineering Ladder Line Surge Protector Replacement Parts Kit, DXE-LLSP-RP, is a kit to use if your DXE-LLSP should ever be damaged. In some locations with lots of lightning, or wind driven static charge buildup, a spare protector or this replacement parts kit is a smart investment. In a few locations you may never need one of these kits. But, here are the parts to rebuild the DXE-LLSP should the need ever arise. These are exactly the same components used in the DXE-LLSP. Along with a replacement PC board, the capacitors, resistors and gas discharge tubes provided are larger than those used in coaxial units. These components are rated to handle 5 kW, so the DXE-LLSP easily handles well over legal limit RF power at the high standing wave ratios expected on balanced line. Plus, the Ladder Line Surge Protector bleeds off the static charge that is collected on your antenna from wind driven sand, rain and snow! To refurbish your Ladder Line Surge Protector, order this kit of parts: DXE-LLSP-RP, DX Engineering Ladder Line Surge Protector Replacement Parts.
( 1 )
$29.99
ERICO Flint Ignitors
ERICO Flint Ignitors are used to ignite the starting material when making a traditional ERICO CADWELD connection or a LENTON CADWELD rebar connection. The ignitor allows you to start the CADWELD process safely and with positive results. Useable with CADWELD ONE SHOTS and most other CADWELD exothermic welding processes, these ignitors are the ERICO recommended starting method. Order your ERICO Flint Ignitors from DX Engineering.
( 5 )
$22.79
ERICO CADWELD ONE SHOT Cable To Cable
ERICO CADWELD ONE SHOT Cable To Cable bonding kits thermally fuse grounding cables together and produce a non-removable, permanent, exothermic connection between ground cables that will not loosen, corrode or increase in resistance for the life of the installation. Included with each ONESHOT Cable to Cable kit is a convenient, single-use (one-shot) ceramic mold that eliminates the need for handle clamps and/or frames. Any outdoor connection made by mechanical clamping methods degrades from the day installed. Use CADWELD ONE SHOT Cable To Cable to ensure the best, most reliable and superior ground connection for your Amateur Radio station! Note: The use of these products generates extreme heat. Please follow all ERICO CADWELD instructions carefully to ensure a safe and successful application of their product. For the ultimate in grounding solutions, choose ERICO CADWELD ONE SHOT, now available from DX Engineering * NEC compliant. * cULus Certified Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$28.89
—
$30.09
Alpha Delta Model LT Coaxial Surge Protectors
Alpha Delta Model LT Coaxial Surge Protectors provide lightning surge protection for transceivers on frequencies from DC up to 30 megahertz. Each unit features SO-239 UHF female connectors on both input and output. Every spring and summer, many pieces of amateur radio equipment are damaged beyond repair by lightning-induced voltage surges. An inexpensive investment in these Alpha Delta Model LT Coaxial Surge Protectors may be your best insurance to protect expensive HF equipment from destructive surge voltages! Don't sit by and allow surge damage. Order Alpha Delta Model LT Coaxial Surge Protectors from DX Engineering to put a damper on those surges!
( 2 )
$39.99
Times Microwave WSB Series Weather Seal Boots
Times Microwave WSB Series Weather Seal Boots work with most of the popular Times Microwave EZ crimp connectors. These boots are available for LMR-195, LMR-200, LMR-240/DXE-8X and equivalents, 0.405 in. diameter coax such as LMR-400, RG-8, DXE-400Max, DXE-213 and equivalent, and LMR-600 size coax. * Use TMV-WSB-195-200 for LMR-195 or LMR-200 * Use TMV-WSB-240 for LMR-240 and equivalent * Use TMV-WSB-400 for LMR-400 and equivalent * Use TMV-WSB-600 for LMR-600 and equivalent These soft, silicone-boot weatherproofing kits replace older weatherproofing methods. They require no heat and only simple and easy hand assembly for valuable time saving in the field. Once installed, the boot provides strain relief to the crimp connection by reducing flexure. WSB kits are IP67 rated and both RoHS and REACH Compliant. Supplied in a convenient 10 pack, WSB kits contain four pouches of silicone lubricant to better facilitate installation of the boot. WSB Series weather seals: * Are ISO 9001 Certified * Provide combination weather seal and strain relief * Eliminate the need for a heat gun to shrink the standard heat shrink sleeve * Fit the most popular Times Microwave EZ connectors * Are IP-67 rated for water ingress Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Weather is the worst enemy of your feedline. Order Times Microwave WSB Series Weather Seal Boots and give your coax the "seal" of approval! LMR® is a registered trademark of Times Microwave Systems.
( 3 )
$26.99
—
$30.95
ERICO CADWELD ONE SHOT PLUS Wire to Ground Rod Clamps
ERICO CADWELD ONE SHOT PLUS Wire to Ground Rod Clamps produce a non-removable, permanent, exothermic connection to a ground rod that will not loosen, corrode or increase in resistance for the life of the installation. ONE SHOT PLUS Wire to Ground Rod Clamps are not clamps, but replace a clamp with a welded connection that thermally fuses the wire to the ground rod. Unlike the standard ONE SHOT, these ONE SHOT PLUS devices use electronic ignition and require no spark igniter or starting material. The required electronic igniter is available separately. All ONE SHOTs include convenient, single-use (one-shot) ceramic molds that eliminate the need for handle clamps and/or frames. These exothermic connections are ideal for threaded or non-threaded copper-bonded steel, galvanized or stainless steel ground rods. ERICO CADWELD ONE SHOT PLUS exothermic welders are also: * NEC compliant, cULus Listed * Rural Utilities Service (RUS) accepted CADWELD ONE SHOT PLUS welders have been used for making permanent and reliable connections to ground rods for telecommunications, broadcast stations, cable television applications and electrical transmission and distribution. Builders in those applications have long known the value and quality of CADWELD systems. Any outdoor connection made by mechanical clamping methods begins to degrade from the day it's installed. Since World War II, CADWELD has provided the industry standard against which all other ground connections are measured. No invention or innovation has proved to be better. Now you may use CADWELD ONE SHOT PLUS to ensure the best, most reliable and superior ground connection for your Amateur Radio station! Note: The use of these products generates extreme heat. Please follow all ERICO CADWELD instructions carefully to ensure safe and successful application of their product. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. For the ultimate in grounding solutions choose ERICO CADWELD ONE SHOT PLUS Wire to Ground Rod Clamps, now available from DX Engineering!
( 5 )
$23.55
—
$43.45