Availability
7 Results Found For "in-line"
DX Engineering Ladder Line Surge Protector Replacement Parts Kit
DX Engineering Ladder Line Surge Protector Replacement Parts Kit, DXE-LLSP-RP, is a kit to use if your DXE-LLSP should ever be damaged. In some locations with lots of lightning, or wind driven static charge buildup, a spare protector or this replacement parts kit is a smart investment. In a few locations you may never need one of these kits. But, here are the parts to rebuild the DXE-LLSP should the need ever arise. These are exactly the same components used in the DXE-LLSP. Along with a replacement PC board, the capacitors, resistors and gas discharge tubes provided are larger than those used in coaxial units. These components are rated to handle 5 kW, so the DXE-LLSP easily handles well over legal limit RF power at the high standing wave ratios expected on balanced line. Plus, the Ladder Line Surge Protector bleeds off the static charge that is collected on your antenna from wind driven sand, rain and snow! To refurbish your Ladder Line Surge Protector, order this kit of parts: DXE-LLSP-RP, DX Engineering Ladder Line Surge Protector Replacement Parts.
( 1 )
$29.99
ERICO Ground Rods
Many hams are misinformed about the importance of proper grounding. It's paramount for safety and station efficiency to have an excellent grounding system. In any grounding system, the ground electrode provides the physical connection to the Earth and is the essential instrument used to dissipate current. ERICO Ground Rods provide the superior Earth connections you need! ERICO has decades of experience and offers a complete line of ground rods to meet Amateur Radio and industry needs. ERICO Ground Rods have these great features: * 99.9 percent pure electrolytic copper coating * Manufactured of high strength 1018 cold drawn steel * Specifically manufactured to work with other ERICO/CADWELD products, like ONE SHOT * Molecular bond to nickel-sealed high strength steel core * Copper coating will not crack when bent or tear when driven * Rods have a high carbon steel core and tip that provide superior strength when driving * Resist corrosion better than galvanized rods allowing for approximately 30-year service life in most soils * Minimum tensile strength of 80,000 psi and straightness tolerance of .010 in. per linear foot * State of the art manufacturing process helps ensure uniform plating thickness * ERICO name, length, diameter and part number is roll-stamped within 12 in. (304.8 mm) of chamfered end * UL logo and control number where applicable stamped on each rod for easy inspection after installation * Minimum copper coating of 10 mils on Rods Listed To Meet UL 467 * Exceed the requirements of ANSI®/UL® 467, CSA, and ANSI/NEMA GR-1 ERICO Ground Rods are a vital part of your station and antenna grounding systems. These superior ground rods will guarantee an efficient Earth ground and enhance your station's safety and efficiency. Order your ERICO Ground Rods from DX Engineering!
( 27 )
$22.99
—
$46.99
DX Engineering Grounding Clamps
DX Engineering Grounding Clamps are used to connect wire grounding conductors of AWG 2 through 10 to a ground rod, tower leg or grounded pipe. These clamps are manufactured from cast bronze, a highly conductive copper alloy, and include high quality 1/4-20 stainless steel screws for maximum longevity and durability. These clamps also accept the stud from our IS-RCT control line protectors, to provide the proper protection of rotator control lines at the base of a grounded tower. Please note that pipe is measured by ID, not OD. For example, 1-1/4 pipe is much larger than 1-1/3 in. OD. DX Engineering Grounding Clamps are available in two sizes, to fit your grounding project. These are great general purpose grounding clamps to have on hand for future projects, so add a few to your order today!
( 8 )
$45.99
DX Engineering Electronic Protection Components
DX Engineering Electronic Protection Components may be used in a variety of electronics and radio applications. These are wire lead components that can be used on circuit boards or in multi-purpose connection devices. Choose from the components listed for detailed specifications: DXE-MOV-82VDC-10 Metal Oxide Varistor, Surge Protector, max. 82VDC/50VAC Pack of 10 DXE-GDT-4KV-5 Gas Discharge Tube, Surge Arrestor, 4kV, Pack of 5 DXE-TVS-1500-10 ESD Suppressor, TVS Diode, Bidirectional, 17VDC max., Pack of 10 DXE-CAP-PT1UF-10 Capacitor, Ceramic, 0.1uf, 1kV DC, RF Bypass, Pack of 10 ---------------------------------------------------------------------------------------------------------------------------------- This series of protection components are well suited for the DXE-CLTB Control Line Terminal Board that provides a flexible and simplified approach to control line surge protection. The DXE-CLTB is a small, 3 inch square printed circuit board (PCB) with four ten-wire compression screw terminal blocks that handle from 14 to 26 AWG conductors and up to 10A. The two outer terminal blocks are for input and output of the control wires and the two 45 degree angled ten-wire compression screw terminal blocks are for connecting electronic surge protection components. This provides for the choice of components to install between the control line and ground to provide shunt protection. Metal Oxide Varistor (MOV), Gas Discharge Tube (GDT), EMP Suppressor TVS Diodes, RF Bypass Capacitors and other wire lead components are easily connected between the control lines and ground. For effective protection wherever shunt devices are used, a low impedance ground is critical. The DXE-CLTB Control Line Terminal Board has four corner grounding screw holes for mounting on metal standoffs to a metal grounding panel inside an enclosure. DXE-CLTB-M Control Line Terminal Board includes a 10-pack of MOVs.
( 1 )
$20.99
Diamond Antenna SP-Series Lightning Arresters
Lightning is every radio operator's nemesis; professional or amateur. During the lightning season every spring and summer, these Diamond Antenna SP-Series Lightning Arresters save many pieces of ham equipment around the world! These arresters are available with several coaxial connection schemes and with multiple RF power ratings. They're designed to pass DC current, so you can install these arresters in-line with external devices requiring coaxial DC power-feed. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. To protect your precious radio equipment, you need quality lightning protection. Then, when the thunder-boomers approach, you can sit back, relax, and let these Diamond Antenna SP-Series Lightning Arresters take the hit for you!
( 22 )
$31.99
—
$41.99
Alpha Delta Coaxial Switch Replacement Arc-Plugs®
Alpha Delta Coaxial Switch Replacement Arc-Plugs® are designed to reduce the hazards of lightning-induced or other high-voltage induced surges. When hit with a surge, they will short to ground, protecting your equipment, and will remain shorted and must be removed or replaced in order to continue operation. As with all lightning protection; these surge plugs will not prevent fire or damage caused by a direct lightning strike to an antenna, power lines, or other structure. Alpha Delta D4 Coaxial Switch Replacement Arc-Plugs® are direct replacements for Alpha Delta Coaxial Switch model Delta-2 and Delta-4 series switches. As when used in Alpha Delta Coaxial Switches, D4 Replacement Arc-Plugs® are rated at 1,500 watts CW and SSB PEP, ICAS, at an SWR under 2:1. Lightning surges do lots of damage annually. Don't let your sensitive Amateur Radio gear go unprotected. Order Alpha Delta Coaxial Switch Replacement Arc-Plugs® from DX Engineering!
( 13 )
$21.99
DX Engineering Weatherproofing Kits
DX Engineering Weatherproofing Kits weatherize your outdoor connections and prevent moisture entry and corrosion with vapor wrap and high quality electrical tape. When your non-weather resistant equipment needs to be mounted outdoors, these weatherproofing kits provide needed protection. Use these kits to protect lightning protectors, coaxial connections, antenna joints, steel hardware, junction boxes and just about anything you can wrap with tape by using these kits. The non-conductive malleable vapor wrap sealant is water-impermeable and withstands temperatures from minus 65 degrees F to plus 180 degrees F without cracking. Choose from Standard, Upgraded or Ultimate kits with different grades of vinyl tape. The WK-PRO Kit has more vapor wrap material and five rolls of tape for large projects. See each kit's detailed description. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Reliable waterproofing is important to protect equipment and cable connections from damage caused by moisture penetration. Protect your equipment, handle extreme temperatures, and remain unaffected by water and UV sun rays with DX Engineering Weatherproofing Kits.
( 19 )
$20.99
—
$23.99