Filters
Clearance
Open Box
Palstar PM2000A Watt Meters
Palstar PM2000A Watt Meters measure and display SWR, forward power up to 2,000 watts, and reflected power simultaneously on a dual movement meter system that operates in the frequency range from 1.8 MHz to 60 MHz. Accuracy of the readings is assured with the PM2000A shielded directional coupler. These backlit meters, which can display average or peak power readings, now have a convenient peak hold function and a push-button selection for 300 watt and 2,000 watt ranges. PM2000A Watt Meters are the improved version of Palstar's best-selling WM150 Wattmeters. When QST tested the PM2000As' predecessor, they found it to be the only wattmeter with true Active Peak Reading. The PM2000As are one of the new generations of watt meters from Palstar. All of the features of the WM150 are integrated into PM2000A meters, now with increased power capability up to 2kW and two-second peak hold metering. To top it off, just like on Palstar tuners, the PM2000A meters have an 11 ga. (0.090 in.) iridite-treated aluminum case with a powdercoated front panel and top cover. Rear panel SO-239 (UHF female) connectors are provided for coaxial cable RF input and output, and a 2.1mm connector provides input for 12 Vdc at less than 200 mA to run the meter circuit and backlight. Note: For additional product information, please look at the files under the "Documentation" tab. Simple to hook up and use, Palstar PM2000A Watt Meters take the guesswork out of your inline RF power and SWR measurements. Order yours from DX Engineering today!
( 13 )
$349.99
$332.49
Clearance
Elecraft W2 Wattmeters
Elecraft W2 Wattmeters are versatile, auto-ranging power and SWR meters with simultaneous, fast response dual bar graph LEDs. Keep track of transmitter, amplifier, and antenna performance with this compact and attractive display that will fit just about anywhere in the shack. It requires only 10-14 Vdc and sensor cable connections. The W2 features two sensor inputs, an over-range alarm, a fully isolated amplifier keying cutout relay and amp keying control. PC remote connectivity is supported with the included USB cable. Read both power and SWR with higher accuracy, as well as set and check alarms, turn the LEDs off, and use for remote operations, all via computer. Included with the Elecraft W2 is one remote RF power sensor, for 1- 54 MHz or 144-450 MHz, which can be placed near the transceiver or amplifier output, minimizing coax cable length. Two sensors can be connected to the W2 to monitor different transmitters or amplifiers, switch-selected from the front panel. Also known as Directional Couplers, sensors have standard SO-239 connectors (UHF female) and connect to the display with standard CAT5 cables, also included. Accommodated by the second sensor input, additional sensors are available separately for a secondary radio, amplifier or alternative frequency coverage. DX Engineering stocks all six versions of the Elecraft W2, three as factory-assembled and tested units, and three as no-solder, easy-build kit units. All versions include one remote power sensor. Choose from the 1-54 MHz, 200W version or the 144-450 MHz, 200W version, both with 2/20/200 watt ranges; or the 1 -54 MHz, 2kW version for 20/200/2000 watt ranges. Offering accurate and efficient SWR and power metering for in-shack and remote operations, Elecraft W2 Wattmeters are an excellent choice. Order yours today from DX Engineering.
( 13 )
$463.95
$417.56
Clearance
MFJ Analyzer Accessory Packs
MFJ analyzer accessory packs are genuine accessory packs for your MFJ analyzers. Each kit includes a dip meter coil, carrying case, and a 12 Vdc AC adapter.
Not Yet Reviewed
$129.95
$97.46
Clearance
Open Box
Metropwr FX3 3KW Power Couplers
Metropwr FX3 3KW Power Couplers are used as sensors to relay measured data about the RF on the antenna feedline to the connected Metropwr FX773 or FX775 SWR/Wattmeter. These external couplers feature a frequency range of 1.8 – 55 MHz and may be installed up to 16 feet (5m) from the touch-screen meter controller. Metropwr Power Couplers are intended for indoor use only.
Not Yet Reviewed
$589.99
$206.50
Clearance
Coaxial Dynamics Dual Socket Directional RF Wattmeters
Coaxial Dynamics Dual Socket Directional RF Wattmeters allow you to measure forward or reflected RF power with the flip of a switch. These wattmeters use Coaxial Dynamics standard elements to accurately detect average RF power from 100mw to 10 kW over a frequency range of 0.45 MHz to 2.3 GHz. Dual socket wattmeters use two plug-in elements to simultaneously detect forward and reflected power. Simply connect the wattmeter between the power source and antenna or dummy load, plug in the appropriate measuring elements and select the forward or reflected switch position. The RF power is directly displayed on the 4-1/2 in. triple-scale meter. Versatile and strong, these wattmeters are protected by a rugged, virtually indestructible shock-proof housing. For added convenience, two sockets for storage of additional plug-in elements are located on the back of the unit. Coaxial Dynamics wattmeters employ a rugged shock mounted meter with a mirror-backed scale for easy reading. Along with superior taut band meter technology, they provide reliable and accurate readings and satisfy both the US Navy and Canadian standards for bounce and vibration. This is your assurance of complete and dependable accuracy! Note: For additional product information, please look at the files under the "Documentation" tab. Coaxial Dynamics Dual Socket Directional RF Wattmeters offer commercial quality, accuracy and flexibility that Amateur Radio operators can actually afford! Order one of your own Coaxial Dynamics wattmeters from DX Engineering and be sure of your RF reflected power!
( 1 )
$675.00
$540.00
Clearance
Coaxial Dynamics Plug-In Elements
Coaxial Dynamics Plug-In Elements are calibrated to exacting specifications to assure interchangeability with one another, with any Coaxial Dynamics and Bird Electronic RF power instrument in the 7/8 in. line size - whether purchased today or 20 years ago. Their calibration is for any 30 microampere full scale meter movement, including Bird Model 43 and Coaxial Dynamics meters, so these elements may be used interchangeably with very good results. Readily available in several full-scale power ratings from 5.0 Watts to 10,000 Watts and eight frequency ranges starting with 2 to 30 MHz through 1.1 to 1.8 GHz. There are Coaxial Dynamics Plug-In Elements to satisfy most Amateur Radio and commercial RF testing requirements. Element accuracy is maintained by calibrations using RF Power Standards (NIST traceable), supported by more than 30 years of history and experience! Your confidence in the quality and dependability of Coaxial Dynamics Plug-In Elements is secured with the exacting manufacturing techniques and high tolerances that produce consistent quality and repeatable accuracy from element to element. Each element carries a Coaxial Dynamics Two Year Limited Warranty. Whether you are monitoring station power, checking antennas, doing bench repairs or just need accurate equipment output readings, Coaxial Dynamics Plug-In Elements,interchangeable with Bird Electronic Corporation elements, provide frequency coverage and power ratings for your Directional Wattmeter. Order your own high-quality Coaxial Dynamics Directional Wattmeters and Plug-In Elements from DX Engineering!
( 15 )
$189.00
—
$295.00
$151.20
—
$236.00