Availability
Meters and Test Equipment
Werewolf USB-C Power Meters
The Werewolf USB-C Power Meters are multi-function meters designed for users that want to know how the stats on a device powered by USB-C. These compact meters feature a USB-C Male connector on one side and a USB-C female connector on the other. Simply connect it inline and it will power itself via the USB-C connection, displaying vital information such as the voltage, amperage, current wattage, time elapsed, current drain, current direction, and the maximum voltage, amperage and wattage that was recorded in this session. With the push of a button located on the rear of the case, that display changes to the current voltage, amperage, wattage, elapsed time, current drain and CPU temperature; double clicking the button flips the display over so that you can read it no matter how it is plugged in, and pressing it and holding the button for three seconds will reset the timer, and maximum measurements. Additional Feature and Specifications: • Voltage 4-30V • Current 0-12A • Timing 0-99 hours • Power 0-360W • Capacity 0-99999MAH • Current Direction Indicator. • Record the maximum power recorded. • Record a maximum current measurement. • Record a maximum voltage at a single point. 10: Electricity 0-99999WH • CPU temperature • Dimensions (excluding USB-C connector): 38mm x 16.4mm x 9mm 1.50 in. x 0.65 in. x 0.35 in. • Product Weight: 0.3oz
Not Yet Reviewed
$14.00
RigExpert Analyzer Belt Holders
RigExpert offers their handy Stick Holders for your Stick 230 or Stick Pro antenna analyzers. What could be better than having an easy-to-reach place to keep your electronic instruments safe? Eliminate the worries of scratching your equipment screens against the keys in your pocket or on tools in your kit! Just load and go with RigExpert analyzer belt holders, available here, from DX Engineering!
( 4 )
$15.00
DX Engineering Termination Loads
DX Engineering Termination Loads are for use on receive devices, splitters and feedlines for operational and testing purposes. Two types are available in 5 packs: - 75 ohm Type-F connector - 50 ohm BNC connector
Not Yet Reviewed
$15.29
West Mountain Radio CBA Temperature Probes
West Mountain Radio CBA Temperature Probes work with your Computerized Battery Analyzer (CBA) to limit how hot batteries may become while under test. Excessive temperature can alter battery chemistry and severely reduce capacity and life-cycle. These temperature probes connect to the CBA and feed temperature data directly to the analyzer. The analyzer may then reduce the discharge current to prevent an over-temperature condition from occurring. For testing at high discharge rates, these temperature probes are must-have accessories! Contact DX Engineering today for your own West Mountain Radio CBA Temperature Probes!
Not Yet Reviewed
$15.95
Sure Electronics Digital DC Panel Meters
Sure Electronics Digital DC Panel Meters are high-efficient yet flexible digital meters used to measure DC voltage and are suitable for applications such as Amateur Radio, automotive, boats, electric toys, motorcycles, tools and more. Sure Electronics Digital DC Panel Meters are able to monitor and display DC voltages from 8.5 – 30 VDC and feature an easy-to-read LED display with Auto-brightness to conserve power consumption. Its minimalist housing style will not get in the way and measures (WxDxH) 3.11 x 0.98 x 1.65 in. For your next project, order a Sure Electronics Digital DC Panel Meter from DX Engineering today! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: - DMV-320-508 – Blue LED Display - DMV-320-532 – Red LED Display - DC Power cable included - LED Number Height - 0.56 in. - Housing Dimensions - (WxDxH) 3.11 x 0.98 x 1.65 in. - Power Consumption – 0.25 W - Input Power Range – 8.5-30 VDC - Accuracy Range – 0.01 – 0.15 VDC / 0.08 Typical (After 3 Minute Warm Up)
Not Yet Reviewed
$15.01
—
$18.91
Eclipse Tools NT-320 Contact Type Voltage Testers
Eclipse Tools NT-320 Contact Type Voltage Testers are designed for safe and efficient voltage detection ranging from 12 - 300VAC and is suitable for live wire testing of AC voltages, breakpoint testing, battery polarity and continuity testing. The NT-320 features a built-in white LED illumination light, enhancing visibility in low-light conditions and is equipped with a large LCD digital display for clear and accurate readings. Additionally, Smart Detection and its Data Hold function makes voltage reading a breeze. The NT-305N ensures users safety with its non-conductive ABS housing and provides a visual and audible alarm if voltage is present. Its built-in pocket clip and compact design makes it highly portable and is ideal for both professional and personal use. It's powered by one 1.5V AAA battery (not included).
Not Yet Reviewed
$12.19
La Crosse Technology Digital Hand-Held Battery Testers
La Crosse Technology Digital Hand-Held Battery Testers are compact, simple-to-operate portable battery testers that are the perfect size to carry in a purse, camera bag, luggage, or backpack. The La Crosse Digital Hand-Held Battery Tester will analyze one battery at a time and will test rechargeable or alkaline batteries in the following sizes: AAA, AA, C, D, 9V and 3V lithium button cell batteries. Simply select the battery voltage, insert a battery according to polarity, press down on the top of the tester to make contact and then read the battery strength on the LCD. Don't throw away good batteries, test them first! Order a La Crosse Technology Digital Hand-Held Battery Tester today! Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$16.99