Availability
Meters and Test Equipment
Diamond Antenna DL30 Series Compact Dummy Loads
Consider one of these Diamond Antenna DL30 Series Compact Dummy Loads. Rated from 0 to 500 MHz, these RF loads allow you the opportunity to test your rig without tying up the airwaves with a test carrier. Capable of 15 watts continuous power, or up to 100 watts for short periods, these DL30 Series loads are available with either PL-259 or N-Type connectors. These units present your transmitter with a 50-ohm load and a maximum 1.15:1 SWR across their entire frequency range! DL-30 characteristics: * Frequency: DC to 500 MHz * Rated Power: 15 watts continuous, 100 watts peak * Connector: PL-259 or N-Type (depending on model) * Impedance: 50 ohms * VSWR: 1.15:1 maximum * Dimensions: 30mm Diameter x 75mm Length (1.18 x 2.95 in.) Use them to verify output power, compare your antenna efficiency to a known standard, or with your wattmeter to get tuned up. One thing's certain- you'll be no dummy when you use one of these Diamond Antenna DL30 Series Compact Dummy Loads from DX Engineering!
( 26 )
$39.99
Moonraker SWR-300 VHF/UHF SWR Power Meters
Moonraker SWR-300 VHF/UHF SWR Power Meters are compact, dual-function meters that are designed to measure the SWR of a VHF/UHF antenna system from 120-500 MHz and can also be used to measure the forward and reflected power of a VHF or UHF radio from 0.5-100 W. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: * 2 – UHF Female SO-239 Connectors * Frequency Range - 120 – 500 MHz * Power - 0.5 - 100 Watts * Impedance - 50 Ohms
( 16 )
$43.99
Summit Racing™ Analog Electrical Gauges
Summit Racing® analog electrical gauges help you keep an eye on the voltage of your mobile equipment. These analog voltage gauges feature a bright white background with easy-to-read black numerals. They include in-dash mounting hardware and 12 V lighting. Monitor your voltage with Summit Racing® analog electrical voltmeter gauges
( 1 )
$27.99
12 Volt Power Precision DC Power Meters
12 Volt Power Precision DC Power Meters are designed to provide the user with precise usage information including supply voltage, amperage, watts, amp-hours, watt-hours, peak amps, peak watts and minimum voltage. These DC Power meters are plug and play, simply connect it inline and it will start providing real-time power usage information. This meter measures up to 60V and 100A, and displays all data on a high contrast green backlit LCD. All metrics that are shown are for the current powerup cycle. Additional Feature and Specifications: Watt Meter Display Startup Screen: Each time power is applied (or auxiliary input is used), the meter resets Amp-hours, Watt-hours, Peak Amps, Minimum Volts, and Peak Watts to zero. Real-Time Parameters: • Amps (A): Average current draw • Peak Amps (Ap): Maximum current since startup • Volts (V): Average system voltage • Minimum Volts (Vm): Lowest voltage (sag) since startup • Watts (W): Average power (Amps × Volts) • Peak Watts (Wp): Maximum power draw since startup • Amp-hours (Ah): Total charge delivered • Watt-hours (Wh): Total energy delivered Values are shown on the green LCD screen, with key data displayed continuously and others cycling every second.
( 1 )
$29.99
Summit Racing™ Digital Gauges
Summit Racing™ digital gauges offer precise, easy-to-read measurements. The bright LED display appears against a black background on these quality 2 1/16 in. diameter instruments. They're available to monitor more than a half-dozen automotive functions. Select the model and color option you prefer.
Not Yet Reviewed
$41.99
—
$42.99
Chelegance JLoad-50 Dummy Loads
Chelegance JLoad-50 Dummy Loads are air cooled dummy loads that present a 50-ohm load to a transceiver for testing power output as well as other transceiver testing functions. Covering a frequency range from DC to 520 MHz, this 50-Watt max power is sure to meet your needs for verifying the operation of your transceiver without transmitting. NCE-CH0032527-M: UHF Male Additional Feature and Specifications: • Frequency Range: 0-520MHz (-M) • Power Rating: 50 Watts (Continuous) • Impedance: 50-ohm • VSWR <1.2 • Connector Type: PL-259 • Cooling: Passive Air cooled
Not Yet Reviewed
$32.99
Summit Racing™ Jumper Test Leads
Summit Racing™ jumper test leads offer secure circuit testing. These color coded leads are used to bypass lengths of wire and to simulate switches. They feature insulated clips to provide sound connections for simpler testing.
Not Yet Reviewed
$21.99
200 Amp Inline DC Power Analyzer and Watt Meters
200 Amp Inline DC Power Analyzer and Watt Meters allow you to measure and monitor DC power in a variety of systems such as Amateur Radio, battery, solar, wind and RC. These DC power meters read voltage, current, watts, amp/hours and watt/hours; all with high precision. Capable of measurements of 4.8-60 VDC and up to 200 amps, these inline meters are powered by the source voltage they measure and will display accumulated amp/hour and watt/hour readings until the meter is shutdown or restarted. With its low power consumption, you'll hardly notice their inline presence. By connecting a separate battery or power source to the optional Auxiliary Power Connector, these meters will precisely measure the complete range of 0-60VDC, as the measurements do not include the small amount of power required to operate the meter. The 16x2 backlit LCD screen is easy to read, even in direct sunlight.
( 3 )
$36.99
—
$47.98
Chelegance OSL Calibration and Coaxial Adapter Kits
Packaged together for your convenience, these Chelegance OSL Calibration and Coaxial Adapter Kits include the popular Chelegance Open-Short-Load Calibration Kit along with 3 Coaxial Adapters. - Please CLICK or TAP on the title of a listed item for an overview - a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 3 )
$25.99
—
$29.99
Comet CAA-5SC Antenna Analyzer Carrying Cases
Comet CAA-5SC Antenna Analyzer Carrying Cases allow you to safely carry your SWR analyzer anywhere. The CAA-500 is a sensitive test instrument; the CAA-5SC case protects the analyzer body and meter lens from damage caused by accidents or every-day wear and tear. These foam-padded cases are open in the analyzer's control area to allow easy use of the analyzer while still in its case. Made from special Nylon Tricot fabric, these cases cushion blows, deflect scrapes, and protect the instrument from harm. They also have a clear protective window for easy reading of the meters and frequency display. When not in use, a front protective flap is held in place with Velcro fasteners. For easy carrying, a shoulder strap and belt loop are included. Order one of your own Comet CAA-5SC Antenna Analyzer Carrying Cases from DX Engineering and keep your CAA-500 looking and working like new!
( 10 )
$47.95
Chelegance Type-N Male OSL Calibrations Kits
Chelegance Type N Male OSL Calibration Kits are precision measurement standards designed to support radio amateurs, RF engineers, lab technicians, and anyone who requires dependable calibration of radio frequency equipment. Each kit includes three Type N male standards (Open, Short, and Load) covering DC to 6 GHz, making them well suited for use with vector network analyzers (VNA), antenna analyzers, and a wide range of RF test systems. These calibration kits help users achieve more accurate and repeatable measurements when working with antennas, oscilloscopes, signal generators, and other RF components. By improving measurement accuracy, they contribute to more reliable test results, better system performance, and greater confidence in the field, and in experimental and production environments.
Not Yet Reviewed
$41.99
Performance Tool Infrared Thermometers
Performance Tool infrared thermometers are handy for a variety of uses. They feature a laser pointer for accuracy and an easy-to-read digital display. Performance Tool infrared thermometers are ideal for home, auto, and industrial applications.
Not Yet Reviewed
$25.99
Lang Tools Digital Multimeters
All Lang Tools digital multimeters perform general voltage and resistance measurements with audible continuity testing for checking switches and fuses. Typical capabilities and features of these versatile, multipurpose digital multimeters include: * Multiple functions * Several ranges * Diode test * Battery test * Temperature * Test leads included Select Lang Tools digital multimeters are available with: * Data hold * Auto power off * Automatic ranging * Inductive pickup * Thermocouple probe * Protective rubber boot * CAT III and/or CAT IV safety ratings
( 1 )
$41.99
DX Engineering RF Attenuators
DX Engineering RF Attenuators are used inline with receiving equipment for testing purposes. An inline attenuator will limit the RF input to preamplifier to prevent overload or be used to pad the output of a high gain preamp to an appropriate level. Adding an inline attenuator to a receiver input allows determination of accuracy of s-meter readings on transceivers with a constant RF input signal source. Sometimes, the level of low power RF equipment needs to be reduced for measurement or to obtain the proper input level to an amplification device, such as with QRP equipment. Specifications of impedance, attenuation, power handling and connectors appear on the part number description. Order inline RF Attenuators for your test bench or shack from DX Engineering.
( 5 )
$45.99
Elecraft DL1 Dummy Load Kits
Elecraft DL1 Dummy Load Kits are a great addition to any ham shack. This general purpose, wideband dummy load allows bench-top testing and alignment before connecting to the antenna. Included is an on-board RF detector allowing accurate transmission power calculations. Shipped as unassembled full kits for customization and custom enclosure mounting. Features include: * Wideband operation: 0-255 MHz * 100 W peak, 20 W continuous power rating * Low SWR: Less than 1.3:1 * On-board RF detection
( 7 )
$41.95
DX Engineering Termination Loads
DX Engineering Termination Loads are for use on receive devices, splitters and feedlines for operational and testing purposes. Two types are available in 5 packs: - 75 ohm Type-F connector - 50 ohm BNC connector
Not Yet Reviewed
$22.99
Chelegance JLoad-10 Dummy Loads
Chelegance JLoad-10 Dummy Loads are air cooled dummy loads that present a 50-ohm load to a transceiver for testing power output as well as other transceiver testing functions. Covering a frequency range from DC to 520 MHz, or DC to 3 GHz, depending on the version, this 10-Watt max power is sure to meet your needs for verifying the operation of your transceiver without transmitting. NCE-CH0032529-M: UHF Male NCE-CH0032529-O1: N Male Additional Feature and Specifications: • Frequency Range: 0-520MHz (-M) • Frequency Range: 0-3GHz (-O1) • Power Rating: 10 Watts (Continuous) • Impedance: 50-ohm • VSWR <1.2 • Cooling: Passive Air cooled
Not Yet Reviewed
$29.99
WiMo 50 Ohm SMA Calibration Kit
The WiMo 50 Ohm SMA Calibration Kit is for use with a miniVNA, Vector Network Analyzer. One 50 ohm load, one short and one open, are each in SMA male connectors for easy calibration of the analyzer or the specific cable being used. This kit is rated to 2.0 GHz and with some cable limitations may be used up to 2.5 GHz.
Not Yet Reviewed
$35.99
Eclipse Tools Compact Multimeters
Eclipse Tools' compact multimeters are the full-featured but portable digital multimeter you need for field or workbench work. Designed to be rugged and dependable, these multimeters are rated for 1m drop height and feature a texturized outer grip surface. The backlit, 3.5-digit LCD screen makes reading data fast and easy. Test and keep your equipment running with Eclipse Tools compact multimeters from DX Engineering! Features include: * 3.5 digit 1999 count display * Backlight with 5 second auto-off feature * Diode and transistor tester * Continuity buzzer * Low battery indicator * 1.0% best accuracy * 200mV/2V/20V/200V/500V DC ranges * 200/500V AC ranges * 200 microamp/2mA/20mA/200mA/10A DC ranges * 600V CAT II rating
Not Yet Reviewed
$22.49
Eclipse Tools MT-1510 Pocket Sized Smart Multimeters
Eclipse Tools MT-1510 Pocket-Sized Smart Multimeters have the appearance of a Smartphone and their compact size allows for a comfortable fit in your pocket. These True-RMS Auto-Ranging Multimeters feature stable performance, high precision and low power consumption. Its large, 3.8 in. diagonal (2.30 x 3.10 in.) backlit LCD display features 3 separate on-screen viewing areas. The bright LED flashlight on the back provides extra illumination in dark areas. The built-in Auto Off feature will turn off the MT-1510 after 10 minutes to save battery and the included TPU protective case will protect the MT-1510 from damage and provide a soft non-slip grip.
Not Yet Reviewed
$39.99
Chelegance RF Demo Kit for VNA
Chelegance RF Demo Kit for VNA is a PCB test board and learning tool for use with a Vector Network Analyzer, such as the Chelegance NanoVNA-F. This helpful demo kit includes two 6.8 in. RG178 coaxial cables with IPX to SMA male connectors to connect to one of the sample circuits on the 3.9 x 3.9 in. test board to your VNA. It features the following 18 RF circuits to demonstrate how each appears on the display when using a vector network analyzer: 1. RLC circuit 2. RLC circuit 3. 33 ohm resistance, SWR=1.5 4. 75 ohm resistance, SWR=1.5 5. Band-Stop Notch Filter, Ceramic, Center Freq. = 6.5MHz 6. Band-Pass Filter, Ceramic, Center Freq. = 10.7MHz 7. RC series circuit 8. LC series circuit 9. Single capacitance 10. Single inductance 11. Homemade low-pass filter, 3dB bandwidth 400MHz 12. Homemade high-pass filter, 3dB bandwidth 500MHz 13. Short Circuit 14. Open Circuit 15. 50 ohm Circuit 16. Through Circuit 17. 10dB attenuation circuit 18. 3dB attenuation circuit
Not Yet Reviewed
$28.99
Blue Sea Systems Panel Mount Mini Digital OLED DC Voltmeters
Blue Sea Systems Panel Mount Mini Digital OLED DC Voltmeters are designed to monitor DC voltages ranging from 8-36 VDC. They feature a bright, waterproof, and daylight-readable yellow OLED display, ensuring clear visibility in various lighting conditions. These compact voltmeters are ideal for use in Ham radio go-boxes, marine, RV, and automotive applications, providing accurate voltage measurements to help maintain and troubleshoot electrical systems. Blue Sea Systems Panel Mount Mini Digital OLED DC Voltmeters include all the necessary components, and they are easy to install into a standard 1-1/8 or 1-3/16 in. diameter mounting hole.
Not Yet Reviewed
$40.99
Coaxial Dynamics Quick Match RF Connectors
Coaxial Dynamics Quick Match RF Connectors are rugged and reliable and allow the user to change the input and output connectors on their Directional Wattmeter in the field. When making power measurements, adapters that would affect impedance and introduce loss shouldn't be used. Quick Match connectors retain proper connections to the Directional Wattmeter Line Section for accurate readings. Even though Quick Match Connectors are physically interchangeable among Coaxial Dynamics products, some connectors may not be appropriate for some power and frequency applications.
( 1 )
$28.00
—
$46.00
Clearance
RigExpert REAMP High-Accuracy Power Consumption Logger
The RigExpert REAMP High-Accuracy Power Consumption Logger is a fantastic tool for engineering techs and IoT developers. To achieve the longest battery life possible, a very accurate and reliable power measurement tool is required. REAMP acts as a stable and accurate power source for the Device Under the Test (DUT). It allows subtle changes to be seen in the power consumption profile of the DUT. To achieve technical development success quickly, REAMP is the best choice for your Ultra-Low Power projects. * Features and benefits of the RigExpert REAMP: - High-accuracy wide range current measurements from 10 µA to 1 А - Two channels for voltage measurement - 10 Hz to 10 kHz sample rate - TRIG and SYNC gates to synchronize logger with target board and vice versa - Time-limit and infinite measurements modes - Built-in Li-ion battery for cases when DUT current consumption is over 500 mA - Comprehensive power consumption analysis with PC software - Easy navigation both for small or extremely large measurement data sets, zooming and scrolling features - Consumption averaging, as well as real-time analysis - Battery Life Calculator - Ready-to-use Multi-OS software for Windows, Linux, and MacOS * REAMP specifications: - Number of measuring channels: 3 - Measuring range: Current: 10 uA to 1 A (1 channel) Voltage: 0 V to 5 V (2 channels) - Sample rate: 10 Hz to 10 kHz (10 kHz one channel only) - Measuring results displaying: Instant values graph Average values in digital format - Saving data to a log - Easy navigation using horizontal and vertical zooming * Power supply: - PC USB port - Additional built-in Li-ion battery to be used when current consumption is over 500 mA * Interface: - USB connection to a PC (USB 2.0, USB 3.0) - Operation system Windows 7, Windows 8, Windows 10 - Application software "REAMP Logger" - 3 languages support (EN, UA, RU) - Dimensions, WHD: 2.638 x 1.063 x 2.224 in. (67 x 27 x 57mm) - Operation temperature: 0 - 40 degrees C - Weight: 100 g - Warranty: 2 years - GTIN code: 4820185420334
Not Yet Reviewed
$120.00
$30.00