Meters and Test Equipment
Availability
HAM Radio Meter & Test Equipment
Test your station equipment with ham radio meters and test equipment from DX Engineering! We’ve got everything you need, including SWR/wattmeters and dummy loads from...
Test your station equipment with ham radio meters and test equipment from DX Engineering! We’ve got everything you need, including SWR/wattmeters and dummy loads from industry leaders like Diamond and MFJ. Our selection includes oil-filled, fan-cooled, and air-cooled dummy loads to safely handle transmitter power as well as accurate, easy-to-read wattmeters to measure full and reflected power. Plus, we carry a full line of antenna analyzers, frequency counters, multimeter, and other testing accessories to help you get your amateur radio station operating at peak efficiency. Don’t just test your equipment—test it safely...
Test your station equipment with ham radio meters and test equipment from DX Engineering! We’ve got everything you need, including SWR/wattmeters and dummy loads from industry leaders like Diamond and MFJ. Our selection includes oil-filled, fan-cooled, and air-cooled dummy loads to safely handle transmitter power as well as accurate, easy-to-read wattmeters to measure full and reflected power. Plus, we carry a full line of antenna analyzers, frequency counters, multimeter, and other testing accessories to help you get your amateur radio station operating at peak efficiency. Don’t just test your equipment—test it safely and accurately with meters and test equipment from DX Engineering.
RigExpert MATCH Upgradeable Antenna and Cable Analyzers
RigExpert MATCH Upgradeable Antenna and Cable Analyzers are designed to revolutionize the way you analyze and fine-tune antennas and cables. Featuring innovative technology, these analyzers offer the flexibility to upgrade as your needs evolve, ensuring they remain a valuable tool for both current and future projects.
( 19 )
$299.99
On Sale
RigExpert Antenna Analyzers
RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!
( 513 )
$1,299.95
$319.99
—
$1,199.95
Monitor Sensors Power and SWR Meters
Monitor Sensors Power and SWR Meters offer groundbreaking features in a device that will easily fit into any high-powered station or feel right at home in your backpack for QRP operation. One thing is certain, every station should have a way to accurately measure SWR and power output of their rig. Monitor Sensors, an Australian company, has taken Power and SWR meter design to the next level by creating a device that will accurately read RF power down to 10mW up to 2,000 W and will measure SWR at power levels as low as 50mW.
( 51 )
$312.99
Daiwa CN-901 Professional Series Bench Meters
Daiwa CN-901 Professional Series Bench Meters offer accurate readings, reliable performance, and great value. Daiwa's large, lighted and easy-to-read cross needle meters will provide your ham shack with consistent readings. CN-901 Series meters feature qualities that will make measuring SWR and power during an antenna test, as well as matching and tuning transmitters, an easy task. Their dual-needle meters have one scale that measures forward power while the other reads reflected power. The SWR is indicated at the crossing point of the two needles… so you can read all three of these important measurements at the same time! Their HP models can also measure P.E.P. That's peak power in SSB operation. A DC cable with 2.5mm plug is included. There are also several frequency-ranges and power levels in the Daiwa CN-901 professional series family to choose from. Note: For additional product information, please look at the files under the "Documentation" tab. For Amateur Radio operations, it's hard to beat the value and performance of Daiwa CN-901 Professional Series Bench Meters!
( 73 )
$225.95
—
$299.99
DX Engineering 1500 Watt Dry Dummy Loads
DX Engineering 1500 Watt Dry Dummy Loads DXE-DL1500U have an attractive, lightweight slotted black aluminum chassis, which provides secure and efficient mounting, RF shielding and air cooling for the large internal resistor. The DL1500U load resistor is nearly three times larger than the resistor in a similar popular dummy load, but this model achieves its performance specifications and will provide years of dependable service. The DL1500U should be used instead of an antenna, as a stable 50-ohm non-inductive load to a transceiver, transmitter, or RF amplifier on HF and 50MHz: • Whenever tuning or testing RF equipment for power output or signal quality • To prevent interference with other stations • To make audio adjustments on a transceiver while listening on a separate receiver • To find initial settings on each band segment for variable components on antenna tuners DXE-DL1500U Dry Dummy Load Specifications: RF Connector: SO-239 (UHF Female); Impedance: 50 ohms, nominal; Frequency Range: 0 to 54MHz; Power Handling (approx..): 100 watts for 10 minutes; 1.5 kW for 10 seconds; SWR: <1.1:1 up to 30MHz (<1.06 typical); <1.25:1 up to 54 MHz (<1.17 typical); Dimensions (WHD): 4 x 3-5/16 x 11-5/8 inches, not including connector
( 3 )
$332.99
Palstar DL1500 1500 Watt Dummy Loads
Palstar DL1500 1500 Watt Dummy Loads are capable of handling 100 Watt "barefoot" power levels for 10 minutes, and 1500 Watts for up to 10 seconds. A custom-designed Hyperbolic cone permits the the DL1500 to operate at up to 500 MHz, although power handling capability diminishes above 30 MHz. DL1500s are air-cooled, so there is no messy transformer oil to deal with. DL1500s are ideal, simple, basic dummy loads for the ham who does not need the capabilities of the much larger DL2K and DL5K Palstar products. Note: For additional product information, please look at the files under the "Documentation" tab. Palstar DL1500 1500 Watt Dummy Loads are available from DX Engineering. Order yours today!
( 5 )
$295.99
Daiwa CN-501H HF/VHF Bench Meters
Daiwa CN-501H HF/VHF Bench Meters offer high quality and are value-priced. These SWR power meters will be right at home in any ham shack. Their convenient features make measurements of SWR and power during antenna testing and tuning a much easier task. You'll be able to match your transmitter or amplifier with ease! Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa CN-501H HF/VHF Bench Meters offer many fine features: * For HF through 2 meters 1,500 watts * UHF (SO-239) connectors. * Frequency: 1.8-150MHz * Power Range Forward: 15/150/1.5kW * Power Rating: 1.5kW (1.8-60MHz) 1kW (144MHz) * Peak reading for SSB operation (external DC power required) * Accuracy: plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W minimum * Input / Output Impedance: 50 OHM * Input / Output Connectors: SO-239 * Dimensions 5in x 3in x 4in * Weight: 1lb. 8 oz. * Lighted (by external 12-14 volt supply, required for peak function) * 2.5mm DC input jack Note: For additional product information, please look at the files under the "Documentation" tab. Daiwa Economy Series HF/VHF or VHF/UHF Bench Meters from DX Engineering are a great choice for value, quality, form and function!
( 54 )
$165.95
Comet CAA-500MARKII Antenna Analyzers
NEW and IMPROVED Comet CAA-500MarkII Antenna Analyzers retain the cross-needle analog function of their predecessor and add a full-color TFT LCD providing graphic and numerical, SWR, total impedance with R and X values (resistance and reactance), along with frequency and battery indicator. Comet was the first to offer a wide range SWR analyzer with an oscillator covering 1.8-500MHz. The new version also provides a very accurate, simple to use SWR and impedance analyzer to the Amateur Radio community. Their analog cross-needle meter displays SWR and impedance simultaneously as you sweep the chosen frequency range, instantly providing the information needed to make antenna adjustments. These Comet analyzers can scan your desired frequency range in seconds, allowing for quick SWR adjustments. Since SWR and impedance, resistance and reactance in ohms are all displayed simultaneously, you are able to determine resonant frequency more easily. These antenna analyzers, powered by six AA Alkaline cells, provide up to 10 hours of operation. With their built in trickle charger, you may also use Nickel-Metal Hydride (NiMH) cells. CAA-500MarkII analyzers have wonderful features: * Auto band sweep function: Switch to the amateur band of choice and press the "Sweep Center" button. The chosen band is swept and the SWR graphed in seconds. * Manual band sweep function: Choose the band, the center frequency, and the bandwidth and manually sweep the frequency range. * Multiple manual sweeps: The graph will overlay manual sweeps in 5 different colors! Make antenna length, position, height above ground, gamma match adjustments etc., and graph each adjustment in seconds without losing the previous graph! * SO-239 connector for 1.8-300 MHz range * Type-N connector for 300-500 MHz range * 8-16VDC external power or 6 AA Alkaline batteries (up to 10 hours of operation) or use Nickel-Metal Hydride (NiMH) cells * Built-in trickle charger (for NiMH batteries, only) * Battery indicator * External DC Power 2.5mm plug and cable included * Selectable auto-power off Note: For additional product information, please look at the files under the "Documentation" tab. The 500MarkII Analyzers retain the simplicity of analog measurements and add digital readout, sweep functions and a full color LCD screen to quickly, visually, analyze antenna performance and adjustments. Get your Comet CAA-500MarkII Antenna Analyzer on order from DX Engineering. Adjust and track YOUR antenna!
( 51 )
$359.99
—
$549.95
Diamond Antenna DL30 Series Compact Dummy Loads
Consider one of these Diamond Antenna DL30 Series Compact Dummy Loads. Rated from 0 to 500 MHz, these RF loads allow you the opportunity to test your rig without tying up the airwaves with a test carrier. Capable of 15 watts continuous power, or up to 100 watts for short periods, these DL30 Series loads are available with either PL-259 or N-Type connectors. These units present your transmitter with a 50-ohm load and a maximum 1.15:1 SWR across their entire frequency range! DL-30 characteristics: * Frequency: DC to 500 MHz * Rated Power: 15 watts continuous, 100 watts peak * Connector: PL-259 or N-Type (depending on model) * Impedance: 50 ohms * VSWR: 1.15:1 maximum * Dimensions: 30mm Diameter x 75mm Length (1.18 x 2.95 in.) Use them to verify output power, compare your antenna efficiency to a known standard, or with your wattmeter to get tuned up. One thing's certain- you'll be no dummy when you use one of these Diamond Antenna DL30 Series Compact Dummy Loads from DX Engineering!
( 26 )
$39.99
—
$59.99
RigExpert Shackmaster OSL Calibration Kits
RigExpert Shackmaster OSL Calibration Kits are valuable calibration tools designed for radio amateurs, lab technicians, and anyone looking to maintain the accuracy of their radio frequency (RF) equipment. This versatile kit is ideal for a wide range of applications, including calibrating oscilloscopes, signal generators, and antennas. The Shackmaster OSL Calibration Kits provide improved measurement accuracy, leading to more reliable test results and better overall system performance. Additionally, they help to increase efficiency and productivity by streamlining the calibration process. Whether you're a seasoned radio amateur or just starting out, the RigExpert Shackmaster OSL Calibration Kit is an essential tool for maintaining the accuracy of your RF equipment.
Not Yet Reviewed
$199.00
Moonraker SWR-300 VHF/UHF SWR Power Meters
Moonraker SWR-300 VHF/UHF SWR Power Meters are compact, dual-function meters that are designed to measure the SWR of a VHF/UHF antenna system from 120-500 MHz and can also be used to measure the forward and reflected power of a VHF or UHF radio from 0.5-100 W. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Additional Features and Specifications: * 2 – UHF Female SO-239 Connectors * Frequency Range - 120 – 500 MHz * Power - 0.5 - 100 Watts * Impedance - 50 Ohms
( 15 )
$43.99
Palstar PM2000A Watt Meters
Palstar PM2000A Watt Meters measure and display SWR, forward power up to 2,000 watts, and reflected power simultaneously on a dual movement meter system that operates in the frequency range from 1.8 MHz to 60 MHz. Accuracy of the readings is assured with the PM2000A shielded directional coupler. These backlit meters, which can display average or peak power readings, now have a convenient peak hold function and a push-button selection for 300 watt and 2,000 watt ranges. PM2000A Watt Meters are the improved version of Palstar's best-selling WM150 Wattmeters. When QST tested the PM2000As' predecessor, they found it to be the only wattmeter with true Active Peak Reading. The PM2000As are one of the new generations of watt meters from Palstar. All of the features of the WM150 are integrated into PM2000A meters, now with increased power capability up to 2kW and two-second peak hold metering. To top it off, just like on Palstar tuners, the PM2000A meters have an 11 ga. (0.090 in.) iridite-treated aluminum case with a powdercoated front panel and top cover. Rear panel SO-239 (UHF female) connectors are provided for coaxial cable RF input and output, and a 2.1mm connector provides input for 12 Vdc at less than 200 mA to run the meter circuit and backlight. Note: For additional product information, please look at the files under the "Documentation" tab. Simple to hook up and use, Palstar PM2000A Watt Meters take the guesswork out of your inline RF power and SWR measurements. Order yours from DX Engineering today!
( 13 )
$332.49
—
$349.99
Chelegance JLoad-200 Dummy Loads
Chelegance JLoad-200 Dummy Loads are air cooled dummy loads that present a 50-ohm load to a transceiver for testing power output as well as other transceiver testing functions. Covering a frequency range from DC to 520 MHz, this 200-Watt max power is sure to meet your needs for verifying the operation of your transceiver without transmitting. NCE-CH0032520-M: UHF Male NCE-CH0032520-O1: UHF Female Additional Feature and Specifications: • Frequency Range: 0-520MHz • Power Rating: 200 Watts (Continuous) • Impedance: 50-ohm • VSWR <1.2 • Connector Type: -M PL-259 -O1 SO-239 • Cooling: Passive Air cooled • Dimensions: 8.84 x 4.72 x 2.76
( 1 )
$79.99
—
$83.99
Daiwa CN-501H2 HF/VHF Bench Meters
Daiwa CN-501H2 HF/VHF Bench Meters offer quality and performance at a reasonable cost. These cross-needle SWR Power Meters are right at home in any ham shack, with three power ranges to suit any need. Simultaneous measurements of forward and reverse power and SWR during antenna testing and equipment tuning very easy. You'll be able to quickly peak your transmitter or amplifier! Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa CN-501H2 HF/VHF Bench Meters offer many fine features: * HF power handling: 2,000 watts maximum * Connectors: UHF (SO-239) . * Frequency: 1.8-150MHz * Forward Power Ranges: 20/200/2.0 kW * Power Rating: 2.0 kW (1.8-60MHz) 1 kW (144MHz) * Peak reading for SSB operation (external DC power required) * Accuracy: plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W minimum * Input / Output Impedance: 50 OHM * Input / Output Connectors: SO-239 * Dimensions 5in x 3in x 4in * Weight: 1lb. 8 oz. * Back-lit meters with external 12-14 volt supply, 2.5mm DC input jack (also required for peak function) Daiwa Economy Series HF/VHF or VHF/UHF Bench Meters from DX Engineering are a great choice for value, quality, form and function! Note: For additional product information, please look at the files under the "Documentation" tab.
( 10 )
$167.95
DX Engineering OSL Calibration Sets
DX Engineering OSL Calibration Sets provide the high quality standards required to take advantage of the Open-Short-Load Calibration capability on specific RigExpert Analyzer models, AA-55ZOOM and higher. The advantage of this ability is to adjust for the coax cable being used, so the analyzer will display the "true" characteristics of the antenna under test, as if the analyzer were connected directly to the antenna feedpoint. The inherent analyzer calibration has its "reference plane" set to the analyzer connector. However, the advanced RigExpert analyzer models allow "recalibration" to be toggled on, to use these Open-Short-Load calibration standards to reset the reference plane. Calibrating with these standards at the far end of any 50-ohm coaxial cable assembly subtracts the electrical parameters of that coaxial cable and its specific length, a process referred to as "nulling" the cable. This allows the analyzer's measurement reference plane to be moved to the far end of that transmission line for accurate measurement of any antenna in its proper operating location. DX Engineering OSL Calibration Set standards are built into high quality silver-plated chassis mount SO-239 (UHF female) connectors. They are self-explanatory in their appearance. The Open standard has no connection from center to shield, the Short standard has a short circuit tab soldered from center to shield and the Load standard has a shroud over a potted, extremely accurate, 50-ohm load resistor. They include a beaded tie to keep them together in your analyzer tool kit. The procedure for using the Open-Short-Load standards is described in the applicable RigExpert manual Annex titled Calibration. To reset the reference plane of the analyzer to the end of a coaxial cable, in order to accurately measure an antenna, perform an Open-Short-Load calibration on the specific coaxial cable assembly to be used. 1. Select Calibrate in the Main Menu (or press F+2 keys) 2. Follow the on-screen three step instructions, sequentially connecting the Open, Short and Load standards to the opposite end of the coaxial cable to be used. 3. To apply calibration to any sweep, toggle on or off that specific cable null calibration by pressing F+2 and the "CAL" icon will appear at the bottom corner of the analyzer screen.
( 8 )
$65.99
Chelegance NANOVNA-F V2 3 GHz Mini Vector Network Analyzer
Chelegance NANOVNA-F V2 3 GHz Mini Vector Network Analyzer is a new generation of portable, stand-alone VNA, featuring a 4.3 inch IPS LCD screen, metal enclosure, 5000 mAh battery and SMA connectors. It is a product based on edy555's NanoVNA and OwOComm's S-A-A-V2. The measurement frequency range of NanoVNA-F V2 is up to 3GHz. The S21 dynamic range is greater than 70dB at 50kHz-1.5GHz and greater than 60dB at 1.5GHz – 3GHz. NanoVNA-F V2 can function up to a continuous 7 hours due to its large capacity battery and low-power design. Specifications: -Frequency range: 50 kHz - 3GHz -S11 dynamic range: 50dB (50 kHz - 1.5 GHz), 40dB (1.5 GHz – 3 GHz) -S21 dynamic range: 70dB (50 kHz - 1.5 GHz), 60dB (1.5 GHz - 3 GHz) -RF output power: -9dBm -Frequency tolerance: 0.5ppm -Screen: 4.3 in. IPS LCD, 800x480 pixel, RTP touchpad -Operation via touch screen or 3 side buttons -Battery: 3.7V Li-Po, 5000mAh -Enclosure type: Aluminum -Enclosure Dimensions (WHD): 4.921 x 2.953 x 0.787 in. (125mm x 75mm x 20mm) -RF port connector: SMA female -Sweep points: 101 -Calibration result storage: 5 -Calibration result interpolating supported -Traces: 4 -Markers: 4 -Measures: S-parameter, VSWR, smith chart, phase, polar, etc. -Mark table can be moved up and down -Firmware upgrade via U-disk with type-c cable -USB power output: 5V/1A -Compatible with NanoVNA-saver, support screenshot Parts Included: -NanoVNA-F V2 x1 -20cm SMA-JJ RG405 cable x2 -Calibration kit: SMA OPEN/SHORT/50 ohm LOAD -SMA-KK adapter x1 -SMA-JJ adapter x1 -SMA-JKW adapter x1 -USB Type-C cable x1 -Stylus x1 Supporting Resources: -User Manual & Quick Starter Guide -[LATEST]NanoVNA-F V2 Portable Vector Network Analyzer User Guide V2.0.pdf (https://chelegance.com/wp-content/uploads/2021/10/CHELEGANCE_NanoVNA-F-V2-Portable-Vector-Network-Analyzer-User-Guide-V2.0..pdf) -[LATEST]NanoVNA-F V2 Quick Start Guide – for firmware v0.3.0.pdf (https://groups.io/g/nanovna-f-v2/files/NanoVNA-F%20V2%20Quick%20Start%20Guide%20-%20for%20firmware%20v0.3.0.pdf) Firmware: -[LATEST]NanoVNA-F_V2_App_v0.3.0.zip (https://groups.io/g/nanovna-f-v2/files/Firmware/NanoVNA-F_V2_App_v0.3.0.zip) -Download previous versions here (https://groups.io/g/nanovna-f-v2/files/Firmware) Desktop Software: -[LATEST]NanoVNA-Saver-0.3.8 (https://chelegance.com/wp-content/uploads/2021/10/Nanovna-Saver-0.3.8.exe) Note: If the current firmware version of your NanoVNA-F V2 device is lower than v0.2.0, please upgrade to v0.2.0 first, and then upgrade to v0.3.0. The new firmware v0.3.0 has the following features: 1. Menu style optimization; New menu UI style; New keyboard UI style: bigger buttons for avoiding typing error; Change the ordinate to 10 grids; 2. Optimized menu structure for more convenient operation; 3. Improved the measurement noise of high frequency; 4. Allow the reference position to be set to negative value; 5. Fixed known bugs.
( 6 )
$262.99
Moonraker SWR-200 SWR Power Meters
Moonraker SWR-200 SWR Power Meters measure forward or reflected power and SWR using a single sweep-style meter. Switch between two inputs that cover frequencies in the HF and VHF bands. Connect your HF/VHF antenna to the SO-239 connector for the 1.8 to 160 MHz frequency range. Select between four power ranges, 5 watt, 20 watt, 200 watt, or 400 watt. This meter will display Average, Peak Power, or SWR as desired. Illuminate the display and make it easier to read in low-light environments by connecting the included DC cable to a 13.8 V DC power source. Additional Feature and Specifications: • 1.8-160MHz • 5W, 20W, 200W, 400W • Average or PEP • 13.8V DC Lamp • 6.102 x 2.480 x 4.055 in. (155 x 63 x 103mm) • 1.59lbs. (870g)
Not Yet Reviewed
$199.99
Chelegance JLoad-100 Dummy Loads
Chelegance JLoad-100 Dummy Loads are air cooled dummy loads that present a 50-ohm load to a transceiver for testing power output as well as other transceiver testing functions. Covering a frequency range from DC to 520 MHz, this 100-Watt max power is sure to meet your needs for verifying the operation of your transceiver without transmitting. NCE-CH0032526-M: UHF Male NCE-CH0032526-O1: N Male Additional Feature and Specifications: • Frequency Range: 0-520MHz (-M) • Frequency Range: 0-3GHz (-O1) • Power Rating: 100 Watts (Continuous) • Impedance: 50-ohm • VSWR <1.2 • Cooling: Passive Air cooled
Not Yet Reviewed
$76.99
—
$81.99
Summit Racing™ Digital Gauges
Summit Racing™ digital gauges offer precise, easy-to-read measurements. The bright LED display appears against a black background on these quality 2 1/16 in. diameter instruments. They're available to monitor more than a half-dozen automotive functions. Select the model and color option you prefer.
Not Yet Reviewed
$41.99
—
$42.99
On Sale
DX Engineering RigExpert Antenna Analyzer/NANUK Case Combos
DX Engineering RigExpert Antenna Analyzer/NANUK Case Combos are the ideal antenna analyzer and protective carrying-case set for professionals or Radio Amateurs. RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines across a wide frequency range. Their large, bright, LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. The following tasks are easily accomplished by using RigExpert antenna analyzers: * Rapid check-out of an antenna's performance * Graphic analysis. * Tuning an antenna to resonance * Provides internal storage of antenna data * USB output allows mass PC storage of antenna data * Perform antenna SWR and impedance measurements and comparisons before and after a specific event (rain, hurricane, winter weather, etc.) * Making tuned coaxial lines or measuring their parameters * Cable testing and fault location (TDR function) * Measuring capacitance or inductance of reactive loads * Specific models include Bluetooth capability for plot file transfer directly to Android, PC and MAC devices without USB connection Note: For details on the individual antenna analyzers and NANUK cases in these combos, go to the "More Detail…" page and click the "Kit/Combo Contents" tab. You may then click the links to individual items in the combo. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.); make RigExpert analyzers attractive for professionals and hobbyists alike. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. NANUK Equipment Cases are designed to protect your most sensitive equipment in even the harshest environments. Every detail of NANUK cases has been refined and perfected to offer the utmost in protection and performance. Teamed with your RigExpert analyzers, NANUK equipment cases offer these exceptional qualities: * Waterproof; watertight to IP67 standards** * Impact resistant** * Crushproof * Dustproof** * Available in your choice of colors * Combo includes high-quality NANUK shoulder strap ** Certified to have passed ATA300 impact standards, ASTM D4169 impact, rain, vibration and drop tests, Mil-STD-810F immersion test and IP67 ingress protection tests. For more detailed information on NANUK cases, please search NANUK in our search window. From their high-impact NK-7™ resin to their PowerClaw™ latches, these virtually indestructible, lightweight, watertight cases offer the ultimate grade of protection for your equipment. Pick 'N Pluck foam squares may be easily removed to accommodate the contents of the case. Customize your RigExpert analyzer case to your own needs! You're investing in a fine piece of test equipment. Protect that investment with DX Engineering RigExpert Antenna Analyzer/NANUK Case Combos and your analyzer will always be clean, dry and safe from impact. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 12 )
$1,384.90
$334.94
—
$1,284.90
Chelegance JNCRadio VNA 3G Portable Vector Network Analyzer
Chelegance JNCRadio VNA 3G Portable Vector Network Analyzer offers a wide frequency coverage of 50 kHz through 3 GHz, with an improved sweep speed of 400 points/sec; four times faster than the NanoVNA-F V2. It features a 4.3 in. IPS touch screen and a 5000mA rechargeable internal battery in a metal case with SMA connectors. The unit is used for measuring SWR, impedance, reactance, phase, delay, and Q factor of RF circuits, filters, duplexers, amplifier strip lines, cables and antennas, and many other applications. It displays in linear, polar and Smith Chart plots. Features of the VNA 3G Portable Vector Network Analyzer: * CE, FCC and RoHS compliance * Frequency range: 50k – 3GHz * Dynamic range: 70dB for S21, 50dB for S11 * Sweep speed: 400 pts/sec * Sweep points: up to 501 * 4.3 in. IPS LCD, ultra-wide viewing angle * All-aluminum alloy case: 5.118 x 2.953 x 0.866 in. (130 x 75 x 22mm), small and portable * SMA RF connectors, easy-to-connect DUTs * Built-in 3.7V 5000 mAh battery, standby time up to 5 hours * Full touch screen design, with 3 side buttons at the same time * TDR function * Built-in simple RF signal generator: up to 4.4GHz, output power adjustable * Support touchstone file save and export, and files are named with RTC time * More than 10 calibration save/recall slots * Optimized UI design, make measurement convenient and efficiency * Screen brightness adjustable * Firmware upgrade via virtual U disk with USB Type-C cable * Equipped with high-quality SMA calibration kit and RG405 cable * 5V/1A USB power output port * Charging via USB Type-C, maximum charging current reaches 2A * Compatible with NanoVNA-Saver PC software SPECIFICATIONS: Parameter: Specification: Conditions: Frequency range 50kHz~3GHz RF output power -10dBm 50kHz – 140MHz -9dBm 140MHz – 1GHz -12dBm 1GHz – 2GHz -14dBm 2GHz – 3GHz Frequency accuracy <±0.5ppm S21 dynamic range 80dB 50kHz – 1.5GHz 70dB 1.5GHz – 3GHz S11 dynamic range 50dB 50kHz – 1.5GHz 40dB 1.5GHz – 3GHz Sweep points 501 11-501 configurable Traces 4 Markers 4 Calibration storage >10 Sweep speed 400 pts/s Display 4.3-inch IPS LCD Resolution: 800*480 Touch screen RTP Battery 3.7V 5000mAh Charging/Data port USB Type-C Charging voltage 4.7V – 5.5V Power output USB-A 5V/1A RF connector SMA Dimensions 130*75*22mm Shell material Aluminum alloy Operation temperature 0℃-45℃ * PARTS LIST: - JNCRadio VNA 3G x1 - 20cm SMA-JJ RG316 cable x2 - Calibration kit: SMA OPEN/SHORT/50 ohm LOAD - SMA-KK adapter x1 - SMA-JJ adapter x1 - SMA-JKW adapter x1 - USB Type-C cable x1 - Stylus x1 RESOURCES: * DATASHEET: https://chelegance.com/wp-content/uploads/2021/12/DATASHEET_Chelegance-VNA-3G-Specifications.pdf * USERMANUAL: https://chelegance.com/wp-content/uploads/2021/12/JNCRadio-VNA-3G-Portable-Vector-Network-Analyzer-User-Manual-V1.0_0.1.pdf * FIRMWARE: [1/22]vnaApp.bin https://chelegance.com/wp-content/uploads/2021/12/vnaApp.bin * DESKTOP SOFTWARE: [1/22]NanoVNA-Saver-0.3.8 https://chelegance.com/wp-content/uploads/2021/10/Nanovna-Saver-0.3.8.exe
( 2 )
$371.99
Daiwa 501 Series VHF/UHF Bench Meters
Daiwa 501 Series VHF/UHF Bench Meters offer high quality and are value-priced. These SWR power meters will be right at home in any ham shack. Their unique features make tedious measurements of SWR and power during antenna testing and tuning a much easier task. You'll be able to match your transmitters with ease! These meters are available with UHF or Type N connectors. Daiwa Economic Series VHF/UHF Bench Meters features and models: * Input / Output Connectors: Model CN-501V; SO-239 * Input / Output Connectors: Model CN-501VN; Type N * Frequency range: 140-525MHz * Forward Power: 20/200W * Power Rating: 200W maximum (140-525MHz) * Accuracy: Plus / minus 10 percent (at full scale) * SWR Detection Sensitivity: 4W min * Input / Output Impedance: 50 OHM * Dimensions in inches: 5 W by 3 H by 4 D * Weight: 1lb. 8 oz. * LED Lighted * 2.5mm DC input jack Note: For additional product information, please look at the files under the "Documentation" tab. Daiwa's lighted dual-needle meter measures forward power with one indicator and reflected power with the other. Where the needles cross is your SWR… read all three at the same time! Daiwa 501 Series VHF/UHF Bench Meters from DX Engineering are a great value and reflect good quality, form and function!
( 25 )
$167.95
—
$171.95
12 Volt Power Precision DC Power Meters
12 Volt Power Precision DC Power Meters are designed to provide the user with precise usage information including supply voltage, amperage, watts, amp-hours, watt-hours, peak amps, peak watts and minimum voltage. These DC Power meters are plug and play, simply connect it inline and it will start providing real-time power usage information. This meter measures up to 60V and 100A, and displays all data on a high contrast green backlit LCD. All metrics that are shown are for the current powerup cycle. Additional Feature and Specifications: Watt Meter Display Startup Screen: Each time power is applied (or auxiliary input is used), the meter resets Amp-hours, Watt-hours, Peak Amps, Minimum Volts, and Peak Watts to zero. Real-Time Parameters: • Amps (A): Average current draw • Peak Amps (Ap): Maximum current since startup • Volts (V): Average system voltage • Minimum Volts (Vm): Lowest voltage (sag) since startup • Watts (W): Average power (Amps × Volts) • Peak Watts (Wp): Maximum power draw since startup • Amp-hours (Ah): Total charge delivered • Watt-hours (Wh): Total energy delivered Values are shown on the green LCD screen, with key data displayed continuously and others cycling every second.
( 1 )
$29.99
Moonraker SWR-777 Digital Wattmeters
Moonraker SWR-777 Digital Wattmeters provide information about the state of your antenna at a glance. A color display shows the forward power as well as the current SWR and battery voltage. The color display provides a number of display options that can provide up to the minute information as to the current state of your antenna system performance. Three LED lights provide visual indication of the SWR status: the left (yellow) LED is below 1.5:1, the middle (green) LED indicates an SWR between 1.5-2.5:1, and the right (red) LED indicates that the SWR is over 2.5:1; an audible alert can also be enabled. Three buttons also are featured on the front panel; these are used to change settings on the meter. Other configurable options allow the user to adjust the meter display if they have compared the readings of the meter with a calibrated meter. The rear panel features a master power switch, two SO-239 jacks (one for the transmitter and one for the antenna) and a USB-C port for power. Covering a frequency range of 1.8 to 250 MHz and operating with a maximum power rating of 210 watts, this meter will cover the needs of most operators. This compact meter, measuring in at 3.46 in. x 2.48 in. x 1.50 in. and weighing just 6.63 ounces, is sized for use in the shack or, with its 3.7V, 1000mAh internal battery, can be used portable as well. Key Features / Technical Specifications: • Working Frequency: 1.8 - 250 MHz • Measurement accuracy in SWR: +/- 5% • Measurement Accuracy in Power: +/- 10% • Type-C power supply: 5Vdc/1A • Power Range: 0.5 - 210W • Nominal Impedance: 50 Ohms • Connector Type: SO 239 (UHF Female) • Battery Model: 3.7V/1000mAh • Package Contents: Meter and user manual • Product Dimensions: 3.46 x 2.48 x 1.50 in. (8.8 x 6.3 x 3.8 cm) • Product Weight: 188g
Not Yet Reviewed
$145.99