Availability
Station Accessories
DX Engineering Foot Switches
DX Engineering Foot Switches are pedal-type switches used for conveniently keying transceivers, amplifiers and other radio or electronic equipment. Available in three styles, these foot switches will suit any ham's equipment keying requirements. Choose from a lightweight, economical and highly visible yellow-plastic switch; or a cast iron switch for extended durability, or an extra-wide cast iron switch for rugged convenience. These well-built, momentary-contact switches feature spring-loaded pedals that are built into tough bodies with slip-proof foot pads and rubber feet that promote positive, reliable switching again and again. Use one of these fine DX Engineering Foot Switches for your PTT keying and switching needs!
( 129 )
$101.99
—
$181.99
Lido L-MAX 2.0 Deluxe Heavy Duty Quick Release Seat Bolt Mounts
Lido L-MAX 2.0 Deluxe Heavy Duty Quick Release Seat Bolt Mounts combine the sturdy Lido L-MAX 2.0 Seat Bolt Mount with accessories to help make the most of the Lido L-MAX mount. Featuring an all-metal design with telescoping support arms that are adjustable from 15 to 23" in height. This set of arms is paired with a quick release base allowing for easy relocation into a second vehicle or removal if the space is needed for cargo or people. An additional foot provides support to help keep the mount stable and reduce vibration. Multiple seat bolt brackets are included to accommodate a large selection of vehicles. The L-MAX 2.0 can handle up to 8 pounds of weight attached to the mount, providing a stable platform for all your mobile radios. The deluxe version of this mount includes a lightweight aluminum extension plate allowing for mounting more than a single device on the mount. The extension plate also includes a central ¼-20 threaded hole for mounting to the L-MAX 2.0's standard ¼-20 stud. Two included ball mounts allow for mounting of of various control heads using either the built-in mounts (on applicable models) or the mounting brackets provided by the radio manufacturers. Several mic clip hangers are also included allowing for hanging of microphones with buttons on the back or ones designed for hooks.
( 1 )
$229.00
JOES Racing Products Switch Panels
JOES Racing Products offers a variety of high-quality switch panels from ignition to start to accessory panels. JOES Racing has numerous panel combinations to meet your needs. The ignition switches feature an aircraft-style flip cover, while start and accessory switches have waterproof boots to seal out moisture and dirt.
Not Yet Reviewed
$104.99
—
$113.35
ICOM IP Remote Control Software
ICOM IP Remote Control Software allows you to operate your Icom radio, even when you're not there! Utilizing your home network, the Internet, or a USB cable (direct PC connect) you can operate your rig from another room--or another region! Some versions of the remote control software works with several present model Icom transceivers and some discontinued late model Icom transceivers. Different software is available for specific ICOM receivers. Best results are achieved with high speed Internet service at each end of remote operation and the software requires a Windows 10 or Windows 11 client end computer . NOTE: For additional product information, please check for hyperlinked files in the Documentation section of the part detail page. Not sitting in front of your radio? It's no problem when you've installed ICOM IP Remote Control Software.
( 36 )
$159.99
—
$229.99
Sierra Radio Systems Universal Relay Control Modules
Sierra Radio Systems Universal Relay Control Modules allow you to control various commercial antenna switches via the system's NodeRed dashboard. This control module can be used to control or emulate the control box for the following antenna switching devices: • 1 of 8 (high side) (DXE-EC-8) • Dual Vertical Array Control Console • BCD Control Console • Pro-Stack Broadband Three Antenna Phasing Relay Unit. • Pro-Stack Broadband Two Antenna Phasing Relay Unit. • CC-8A Control Console • Hi-Z Antenna - 3 Element Array Swtiching • Hi-Z Antenna - 4 Element Array Swtiching • Hi-Z Antenna - 4-8 Pro 8 Element Array Swtiching • Hi-Z Antenna - 8 Element Single Band Arrays
Not Yet Reviewed
$250.00
Milwaukee M12 Radio Plus Chargers
Milwaukee M12 Radio Plus Chargers are a great jobsite audio solution that delivers unmatched versatility for its size, allowing users to charge up, and turn up the sound with a full-range speaker, a tweeter, and the portability for the freedom to hang it up wherever you go. Streaming via Bluetooth seems to be more popular these days, but it's also nice to be able to tune into a radio station. These IP54 rated Bluetooth radios can be powered via a M12 battery or AC adapter, with the same 12V DC barrel jack also powering the battery charging feature. The M12 Radio Plus Charger also has a built-in USB charging port with 2.1A output. Milwaukee M12 Radio/Charger features and specs: * Connectivity: Bluetooth 4.2 for streaming music and AM/FM radio * 100 ft. Bluetooth range * Full-range speaker and tweeter deliver clear mids and highs * AM and FM radio tuner button for treble or bass adjustment * 10 radio presets * 6 ft. AC adapter * Self-centering keyhole and hollow handle offer various hanging options * 2.1A USB charging output delivers fast electronic device charging * IP54 water and dust resistance * No-interference battery charger * Up to 10 hours runtime with CP 2.0Ah battery * Dimensions: 5.39 in. x 9.21 in. x 5.67 in. * Weighs approximately 3.68 lbs.
Not Yet Reviewed
$169.00
The Radio Source Lowdown 630-Meter Lowpass Filter
The Radio Source Lowdown 630-Meter Lowpass Filter makes it possible to explore the 630-meter band with a MARS-modified HF transceiver with the confidence that you will be transmitting a clean signal. This lowpass RF filter is designed to allow you to use your existing equipment to transmit on the 630-meter band with a signal that meets FCC requirements for harmonic and spurious emissions. Install this filter at the output of your Amateur Radio transceiver using 50-ohm coaxial cable and PL-259 connectors. It mitigates harmonics and spurious emissions above the 472-479 kHz (630m) band. Remove the plastic caps that cover the coaxial connectors. The filter may be installed with either end connected to the transceiver or to the antenna system. For indoor use only.
Not Yet Reviewed
$185.00
DX Engineering Ferrite
DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.
( 198 )
$106.99
—
$116.99
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub features CI-V over Bluetooth and a 5-Port hub that connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. It delivers perfect CI-V data to many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-6BT V2 Bluetooth Interface Data Hub is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Additionally, the CT17B-6BT V2 can interface to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
( 1 )
$106.24
Lido LM-300HD Seat Rail Mounts for Remote Heads
LM-300HD Seat Rail Mounts for Remote Heads is a mounting pedestal that can be used as a replacement, upgrade, or as an addition to an existing pedestal, and is compatible with device holders that have a 4-Hole AMPS drill-base pattern. The car seat rail mount is made of strong aluminum, and is ideal for those who need easy access to their mobile radio or other device but prefer mounting it somewhere other than drilling the manufacturers mount into the vehicle. It features an adjustable arm with swivel ball positioning. In addition to cars and trucks, this pedestal is recommended for fleets and service vehicles. Multiple brackets are included for various seat rail configurations. This mount is easy to install. Use a socket wrench to install the mount to the car's seat rail. Loosen the passenger seat track bolt, insert the included seat track bolt bracket, and then retighten the bolt.
( 1 )
$113.99
La Crosse Technology Wireless Weather Stations
La Crosse Technology Wireless Weather Stations are versatile, powerful, and affordable. Their weather stations use temperature and barometric pressure to define trends and forecast future conditions. Their wireless Weather Plus stations augment forecasts with additional features and capabilities to provide a wider range of environmental data. Wireless weather stations can, and do, monitor all manner of basic weather data. You can track outdoor temperature and humidity, dew point, barometric pressure, pressure trends and changes, and even rainfall with their Wireless Rain Center. The real beauty in the wireless nature of these stations is that you can place the sensors in their most appropriate locations and NOT worry about any wires or cables! Wireless weather stations may predict overnight low temperatures, display lunar phases, alert you to the day length from sunrise to sunset, suggest what to wear outside, and even display Atomic Time and date. Whether you have a mild interest in your local weather, or a burning passion for humidity and dew points, La Crosse Technology Wireless Weather Stations from DX Engineering provide the powerful weather-data and information-flexibility that you need!
( 5 )
$102.99
—
$199.99
Gator Cases Frameworks Portable Utility Tables
Gator Cases Frameworks portable utility tables are the perfect companion for portable POTA activations, camping trips, or working in the shack. Featuring a versatile utility tabletop with a double-X stand, these tables offer numerous levels of adjustability to suit your needs. Its rubberized leveling foot ensures stability on uneven surfaces, while the heavy-duty steel construction guarantees durability and easy adjustability. Designed for both seated and standing use, these tables lock in a closed position for effortless portability. Whether you're in the field or at home, the Gator Frameworks portable utility table provides a reliable and convenient workspace.
Not Yet Reviewed
$149.99
I0JXX SEQJXXBOX Sequencers
I0JXX SEQJXXBOX Sequencers are advanced switching control units for preamplifiers, power amplifiers, transceivers and transverters typical of VHF, UHF and SHF amateur and commercial radio systems. When using independent low-noise mast-mounted or inline preamplifiers and inline power amplifiers, the correctly sequenced timing of PTT and disconnect signals must be sent before keying a transceiver or transverter. The required task of preventing preamplifier burnout, power amplifier hot switching and potential relay damage is very well handled by the SEQJXXBOX. Featuring independently configurable time delay sequencing for SSB and CW modes, the SEQJXXBOX has four separate output relays which are tied in series to ensure the proper switching sequencing of every critical component in the receive-transmit chain. Configurations and functions are entered with a four-button control and Status info in RX and TX is displayed on a 2x16 alpha-numeric blue-tone readout. Independent front panel switches for turning on or off the Preamp, the Power Amp, and the Sequencer, along with programmable control over CW Break-In and relay timing provides intuitive and helpful operational flexibility. Two rear panel 8-screw barrier strips handle all input and outputs, so simple stripped lead wiring is required from all peripheral components. A simple Foot Switch for SSB PTT is provided with each unit. FEATURES of the I0JXX SEQJXXBOX Sequencer: • Switching delay time RX>TX TX>RX Every mode from 50 to 500 mS (step 10 mS) • Switching delay time CW TX>RX from 100 to 900 mS (step 100 mS) • CW Break-In operations configurable (enabled by default) • Name or Call Sign on display (up to 6 alphanumeric characters) • Display lighting 2 modes: always on / on only during configuration SPECIFICATIONS of the I0JXX SEQJXXBOX Sequencer: INPUT: MIC-PTT (foot switch) CW-KEY (3 contacts, straight key or Iambic paddle Display: LDC 2 lines per 16 letters, blue color (with contrast adjustment) Menu access: 4 front panel pushbuttons Power Requirement: 12 VDC @ 180 mA TX; 40 mA RX. (No internal battery) Dimensions, WHD: 3.937 x 1.969 x 4.331in. (100 x 50 x 110mm) Weight: 1.343 lbs. (650 g) The I0JXX SEQJXXBOX is an indispensable tool for proper and successful operation of each crucial component in a VHF, UHF, or SHF station.
Not Yet Reviewed
$229.99
On Sale
Mr. Heater Portable Buddy Heaters
The line of Mr. Heater Buddy heaters are great for portable extra warmth almost anywhere you are. Equipped with a low-oxygen shut-off pilot system and accidental tip-over shutoff for indoor safety, these lightweight Buddy heaters are great for tents, hunting blinds, ice shacks, tailgate parties, cabins, workshops or even during a home emergency power outage. Buddy heaters feature low/high heat settings of 4,000 and 9,000 BTU/hr. allowing you to control comfort level and operates on a 1 lb. disposable propane cylinder offering up to six hours of heating time or hook up to a 20 lb. cylinder with the optional hose (not included) for up to 110 hours of heat. Warm those chilly areas, no matter where they are, with Mr. Heater portable Buddy heaters.
Not Yet Reviewed
$124.99
$112.49
VE2DX Electronics CT17B-7DM V2 Bluetooth and USB Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-7DM V2 Bluetooth and USB Icom Interface 5-Port TrueCIV Data Hub features a USB CI-V computer interface, CI-V over Bluetooth and a 5-Port Icom TrueCIV version 2 hub that connects the transceiver's CI-V data stream to a computer and multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The USB-C data port of the CT17B-7DM V2 is also protected by the same principles as TrueCIV, called TrueTTL, for stable clean communications to the computer and successful integration of devices with applications. It delivers perfect CI-V and USB TTL data for many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-7DM V2 Bluetooth Interface is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports and single USB port. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Along with the USB CI-V computer interface, the CT17B-7DM V2 interfaces to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
Not Yet Reviewed
$124.94
On Sale
Napier Sportz Cove Awnings
Get ready to find your happy place with Napier Sportz Cove awnings! They easily transform your SUV, CUV, or minivan into the perfect outdoor haven. They're made of high-quality materials and feature precision-tapered seams. Napier Cove awnings are not only extremely simple to set up, but also fold away in mere minutes and can be easily transported during your travels. Order the size needed for your vehicle. Features: * Two size options to accommodate all CUVs, SUVs, and Minivans * Seamlessly connects to the cargo area of your vehicle * Over 2 ft. of awning provides ultimate shade and shelter from the sun * Lightweight carrying bag for easy storage * Made of high-quality polyester taffeta * Mesh screen door for reliable bug protection without sacrificing your view * Built-in storm flaps provide additional weather protection and privacy
Not Yet Reviewed
$129.99
$110.49
La Crosse Technology S81120 Wireless Weather Station
La Crosse Technology's S81120 Wireless Weather Station with Temperature, Wind and Humidity is one of their latest wireless weather stations that lets you plan your day with confidence. It's like having a personal meteorologist right in your home. Features of the S81120 Wireless Weather Station: * 4 Languages (English, Spanish, French, and German) * Greeting on startup (HELLO SETUP TIME) * Adjustable backlight (5 levels) * Backlight auto dim * Low battery indicators for Station and Sensor * Wall hanging or free standing option * 12/24-hour time setting * Manual Set Time * Calendar: Day, Month, Date, and Year * Month/Day and Day Month setting * Indoor/Outdoor readings (toggle between readings with auto scroll) * Feels Like Temperature and Dew Point * HI/LO Records with Time/Date Stamp * Indoor/Outdoor Temp/Humidity Alerts * Low battery Indicator * Strength indicator for sensor * Current and Top Wind Speed * Wind Speed History view: 24 hours, 7 days, month, year * Monthly Wind Speed history record for past 12 months * Wind Speed Alert * Wind direction (16 options shown in Letters) or 359 degrees Specifications of the S81120 Wireless Weather Station: -- Display * Temperature Range: 32 to 122 degrees F (0 to 50 degrees C) * Humidity Range: 10 to 99 percent RH Included TX145WSDTH Wireless Outdoor Temp, Humidity and Wind Sensor * Wind Speed Range: 0 to 111 mph (0 to 178 kph) * Degrees of Direction: 360 degrees with 16 Cardinal Directions * Outdoor Temperature Range: -29 to 60 degrees C (-20 to 140 degrees F) * Outdoor Humidity Range: 10 to 99 percent RH * Transmission Range: 330 ft. (100 meters) (Please Note: The Breeze Sensor will operate accurately at temperatures down to -40 degrees C. The solar panel needs to be exposed to maximum sunlight and clear of snow to maintain the internal super capacitor charge for severe cold weather operation. The transmission interval may be automatically reduced during low sunlight and extreme cold to extend operation time.) -- Power Requirements: * Display: 5.0 V power cord included (required), 2 "AA" batteries, backup for time and date * TX145WSDTH: One rechargeable ML2032 Coin Cell Battery (included). Using a non-rechargeable coin cell battery can potentially ruin the sensor. Ensure the replacement battery specifically states that it's a ML2032 Rechargeable Battery. -- Dimensions: * Display (WHD): 3.77 x 7.01 x 1.14 in. * TX145WSDTH with bracket (WHD): 2.61x 9.87 x 12.28 in. -- Sensor Update Intervals: * TX145WSDTH: Every 31 seconds
( 1 )
$121.99
RigExpert 2.4GHz Bi-Directional Power Amplifiers
RigExpert 2.4GHz Bi-Directional Power Amplifiers are specialized devices designed for applications within the 2.4GHz Industrial, Scientific and Medical (ISM) band. Its primary function is to enhance signal strength in both transmit (TX) and receive (RX) modes. With a 5VDC power supply, this amplifier provides a 10dB gain during receive and a 22dB gain during transmit. Its versatility makes it suitable for various applications including Amateur Radio, software-defined radio (SDR), unmanned aerial vehicles (UAVs), Internet of Things (IoT) devices and laboratory equipment.
Not Yet Reviewed
$189.99
WiMo MBA-705 Holder for IC-705 with Antenna Mount
The WiMo MBA-705 Holder is a solid metal antenna mount and table stand for the IC-705. The holder is attached to the side of the IC-705 in place of the grounding screw. This holder can lock the radio into two positions, straight up or tilt back, while the antenna remains vertical. A user supplied antenna mounts to the UHF Female/SO-239, connected to the IC-705 with an included coaxial adapter cable. The MBA-705 makes it easy to mount antennas such as the Comet HFJ-350M, HFJ350MTOYBOX or Diamond Antenna RHM-10B. A thumb-screw stud next to the antenna mount makes it easy to connect counterpoise wires. The MBA-705 Holder is precisely milled aluminum that is black anodized. It is not only practical, but it also looks great! It's a perfect match for your IC-705!
( 1 )
$199.99
NANUK Equipment Cases
NANUK Equipment Cases are designed to protect your most sensitive equipment in even the harshest environments. Whether battling the scorching heat of the Sahara or the bone chilling cold of the Arctic, every detail of NANUK cases has been refined and perfected to offer the utmost in protection and performance. All NANUK Equipment Cases offer these unique qualities: * Waterproof; watertight to IP67 standards** * High performance gasket * Lightweight NK-7™ resin construction * Impact resistant** * Crushproof * Dustproof** * Powerclaw™ latching system * Soft grip foldable handle * Accepts padlock * 100 percent stainless steel hardware * Automatic pressure release valve (for air travel) * Molded-in bezel system * Integrated lid stay * Stackable ** Certified to have passed ATA300 impact standards, ASTM D4169 impact, rain, vibration and drop tests, Mil-STD-810F immersion test and IP67 ingress protection tests. From their high-impact NK-7™ resin to their PowerClaw™ latches, NANUK cases have been engineered and manufactured to stringent military specifications and are able to surpass the needs of the most demanding users. These virtually indestructible, lightweight, watertight cases offer the ultimate grade of protection in a variety of sizes, configurations and colors. Simply choose a model based on your physical volume requirements and choice of hue. Complemented by a large selection of optional accessories, like foam inserts and padded dividers, and offering an incredible degree of customization, NANUK cases are the best choice to move your equipment in complete security. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment in the urban jungle, NANUK Equipment Cases are up to the challenge!
( 13 )
$104.95
—
$239.99
VE2DX Electronics Accessory Port Breakout Boxes
VE2DX Electronics Accessory Port Breakout Boxes offer a simple, straightforward way to connect your transceiver to other devices with easy-to-use pinout breakout boxes. One for ICOM 8-pin DIN or 13-pin DIN and another for Kenwood 13-pin DIN Accessory port radios, offering remarkably simple access to the signals available via eight 3.5mm mono connectors. DIN plug pins are extremely close together and particularly challenging to solder. Your radio can be internally damaged if you make an incorrect or shorted pin connection. Use VE2DX Electronics Accessory Port Breakout Boxes to reduce the chances of error and to simplify the connections. Connect your devices with confidence as all signals and grounds on the VE2DX Electronics Accessory Port Breakout Boxes are RFI-Filtered and PCBs are fully shielded on both sides. All required DIN and 3.5mm connecting cable assemblies are sold separately, so you can order only what you need.
( 1 )
$123.24
—
$144.99
Gator Cases Standard Molded Equipment Rack Cases
Gator Cases Standard Molded Equipment Rack Cases are constructed from lightweight, rugged polyethylene. They include full size locking front and rear removable lids that incorporate heavy-duty "butterfly" twist latches that secure the lids onto the case. Comfortable side handles are securely mounted provide for carrying the case. These cases can be easily stacked with cases of the same style and type. Gator Cases Standard Molded Equipment Rack Cases feature field replaceable 7mm zinc-plated steel threaded front and rear rack rails. They are available in the industry standard 19 inch width, in two case depths, 19 inches and 14 inches, and a variety of heights. Equipment racks and their vertical mounting rails have standardized threaded hole spacing and rack panel heights for mounting equipment. Designated in Units, one rack unit - 1U- is equivalent to a 19 inch wide panel that is slightly less than 1.75 inches, for panel clearance. For example, a rack designation of 4U has a vertical panel space that is about 7 inches tall, and the 6U rack has 10.5 inches of panel space, and so on, with the overall case structure height always greater. Professional equipment manufacturers produce rack mounted equipment that is typically 1U, 2U, 3U or multiples of those heights. Rack shelves, panels, screws and drawers are available to accommodate radio equipment and accessories that are not built for rack mounting. Gator Cases Standard Molded Equipment Rack Cases and accessories are ideal for building the completely self-contained Amateur Radio go-kit. Gator Cases are designed for the audio and performance professional and serve perfectly for Amateurs and individuals supporting Emergency Communications. For those who prefer a professional option to easily transport and store radio and electronic equipment, Gator Cases have arrived at DX Engineering.
( 3 )
$249.99
Davis Instruments Anemometers
Davis Instruments Anemometers include both wind speed and wind direction sensors. They have rugged components that stand up to hurricane-force winds, yet are sensitive to the lightest breeze. The wind-speed range and accuracy have been verified in wind tunnel tests at speeds in excess of 200 miles per hour. For areas where icing of the anemometer may be a problem, drip rings to deflect water from the joint between moving parts have been provided. These precision instruments also feature sealed stainless steel ball bearings for long life and they come complete with necessary mounting hardware. Each anemometer includes 40 ft. of cable to connect to your ISS, cabled console, or anemometer/sensor transmitter. When it's time to replace or add an anemometer, remember that these Davis Instruments Anemometers, now available from DX Engineering, will take Fujita-scale winds. Specifications: * Wind speed range: 1 to 200 mph, 1 to 173 knots, 0.5 to 89 m/s, 1 to 322 km/h * Accuracy 5 percent to 200 mph * Resolution 1 mph or 1 knot * Sealed stainless steel ball bearings for long life * Compatible with Cabled Vantage Pro2 or anemometer/sensor transmitter kit
Not Yet Reviewed
$240.00
NANUK Equipment Case Accessories
NANUK equipment case accessories are designed to enhance the protection offered by your NANUK cases. Choose from these worthwhile accessories: * FOAM: Multilayer customizable cubed-foam inserts * PRE-FIT FOAM INSERTS for specific products (FOAMGOPRO, drones, etc.) * DIVI: Padded dividers * Shoulder Strap (DX Engineering part number PSC-900-STRAP) * TSA-approved combination padlock (DXE Engineering part PSC-900LOCKNANUK) Here is more information about these NANUK accessories: FOAM: NANUK "Pick'n'Pluck" cubed foam is made of high-quality polyurethane. Their multi-layered set of customizable inserts includes a pre-scored removable layer. This layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case. This solution is ideal if you need a quick and easy way to protect and organize your items. Pre-Fit FOAM inserts for drones: If you operate a DJI or 3DR drone, there are certain NANUK cases that these pre-fit foam inserts are ready for—or order the case with the foam! These custom foam inserts safely house your quadcopter and protect it from impact. FOAM GoPro: Foam inserts are also available for GoPro cameras. These inserts are pre-fitted to perfectly protect your GoPro cameras and accessories. DIVIders: If you require compartmentalized protective organization of your components or equipment, NANUK padded dividers are the right choice. Easily tailored to your needs with repositionable hook-and-loop fasteners, the padded dividers are designed to easily organize and protect your equipment. 900-STRAP: NANUK neoprene shoulder straps incorporate Aircell comfort technology to reduce fatigue when transporting your case. The shoulder strap can easily be attached to NANUK case models from the 905 Series through the 945 Series without any additional hardware. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment at home in your closet, NANUK equipment case accessories are now available from DX Engineering.
Not Yet Reviewed
$104.95
—
$239.95