Availability
Station Accessories
REZ Antenna Systems Non Slip Elastic Straps
REZ Antenna Systems Non-Slip Elastic Straps are lined with silicone and designed to work with the FlexPack Antenna Bag. These non-slip straps, combined with the bag's unique loop-lined interior base, provide four additional straps to securely hold your gear, preventing movement during transport.
Not Yet Reviewed
$8.00
Lido LM-1203 Adhesive Mic Hangers
Lido LM-1203 adhesive mic hangers offer drill and no-drill mounting solutions. Lido includes a 3M VHB adhesive pad so you don't have to drill a hole in your beautiful dash and will not leave residur when removed. The hangers also have pre-drilled holes for screws (not included). These Lido mic hangers work with Alinco, Anytone, BaoFeng, Kenwood, Yaesu, and with speaker mics for HTs--just clip the clip onto the mount and your good to go.
( 1 )
$5.00
Yaesu FT-991A RA6004000 Encoder Replacement Knobs
Yaesu FT-991A Encoder Replacement Knobs are a genuine Yaesu replacement part that serves as a direct replacement should the original knob become lost or damaged.
( 1 )
$9.99
Lido LM-QR Quick-Release Adapters
Lido LM-QR Quick-Release Adapters function much like a camera tripod and snap onto the flat 4 hole amps mounting plate found on the LM-300, LM-803-AMPS, LM-802-AMPS, LoPro and any other Lido mount with a 4 hole amps mounting plate, except the LM-300HD and The L-MAX. This kit comes with a 1/4-20 in. screw for use on ICOM IC-706, IC-7000, ID-4100, IC-2820 remote head units. It also comes with a 5mm screw to fit Yaesu FTM-100, 200, 300, 350, 400, 500, FTM-6000 and FT-891 and 4 nuts and bolts for 4-hole AMPS mounting.
( 1 )
$9.95
Gator Cases Rackworks Accessories
Gator Cases Rackworks Accessories will help complete your equipment rack case project with Rack Screws, Outlet Power Strips, Replacement Rails and Drawer Foam and much more. Create or reconfigure your Equipment Rack Case to be even better with Gator Cases Components and Accessories from DX Engineering.
( 2 )
$8.99
Lido LM-A-1 Yaesu Ball Mount Adapters
Lido LM-A-1 Yaesu ball mount adapters work with the LM-504 and LM-803 Series mounting pedestals, or any pedestal with a 17mm ball mount, converting them to a 5mm threaded stud for use with Yaesu FTM-100, FTM0300, FTM-350, FTM-400, FT-891 control heads.
Not Yet Reviewed
$7.95
Lido LM-EXP-6-3M Adhesive Mounted Locking Mic Hangers
Lido LM-EXP-6-3M Adhesive Mounted Locking Mic Hangers will accept button type microphone mounts like those typically found on Alinco, Anytone, Yaesu and many others. These mounts come with a locking faceplate and a release lever to securely hold your microphone in place. The 3M adhesive backing provides a clean, no-drill installation.
Not Yet Reviewed
$8.95
Clearance
2026 ARRL Field Day Stickers
Show your pride in ARRL Field Day with this vibrant red, white, and blue vinyl sticker featuring the 2026 theme "Amateur Radio: A National Resource." Designed with a durable matte finish, it's ideal for laptops, tumblers, suitcases, notebooks, and other smooth surfaces. Printed on thick, high quality vinyl, this sticker adds a bold splash of color while standing up to everyday use. Whether you're attending an ARRL Field Day event in person or participating remotely, it's a simple and eye catching way to celebrate Field Day weekend and show your support for amateur radio.
( 2 )
$2.00
$1.20
DX Engineering Adhesive Rubber Feet
DX Engineering Adhesive Rubber Feet are the perfect solution for protecting and stabilizing your equipment. If you've ever pushed a piece of equipment away from you while working the controls, or marred the top of another component, get a set of DX Engineering adhesive rubber feet and keep your equipment in place.
( 1 )
$7.49
—
$8.49
Lido LM-1201 Microphone Hooks
These Lido LM-1201 Microphone Hooks work with the ICOM hook system and are designed to be attached to your dash or console with the adhesive pad. When you need to remove your rig, the adhesive can be removed without leaving a residue! NOTE: Some trimming of this hook may be required, depending on the Icom microphone model being used with this hook mount. Contact DX Engineering today for your own ICOM-style Lido LM-1201 Microphone Hooks!
( 4 )
$5.00
DX Engineering Decal Sheets
Some hams like to collect all kinds of vendor gear. They want hats, shirts, pens, note pads; just about anything with the vendor's name on it. Our new DX Engineering Decal Sheets offer you the opportunity to spread the word about your support of your favorite Amateur Radio equipment vendor! Our decal sheets are nicely printed, full color, DX Engineering stickers! They provide two-each of three-different DX Engineering logos. These vinyl stickers may be applied to any smooth, relatively flat surface. Decal sheets are 7.0 in. by 7.5 in. Here's a convenient way to adorn your stuff with our famous DX Engineering logos. Order your DX Engineering Decal Sheets today and show that you are a fan!
( 2 )
$1.99
Lido L-A-6 ICOM Base Adapters
Lido L-A-6 ICOM Base Adapters fit ICOM remote control heads and brackets with a ¼-20 in. threaded fittings and provide a secure fit when installing one of these heavier transceivers onto the Lido LM-300HD or the LM-BASE mounts. These adapters feature a metal swivel ball on one end and a ¼ -20 in. threaded stud on the other end with an easy-grip thumb wheel to aid with installation.
Not Yet Reviewed
$9.95
Lido LM-A-2 ICOM Ball Mount Adapters
Lido LM-A-2 ICOM ball mount adapters work with the LM-504 and LM-803 Series mounting pedestals, or any pedestal with a 17mm ball mount, converting them to a 1/4 in.-20 threaded stud for use with Icom IC-706, IC-7100, IC-2820 and ID-4100 control heads. Requires an Icom remote head bracket (not included).
Not Yet Reviewed
$7.95
Yaesu Replacement Rubber Suction Diaphragms
Due to vehicular temperature extremes, plus dirt and dust, the suction diaphragm on mobile mounts can suffer failure. Yaesu Replacement Rubber Suction Diaphragms for their MMB-98 mobile mounts let you keep your mount in great shape—and stuck where it belongs! These replacements, referred to as a "sheet" in some literature, refresh the ability of your mount to attach to smooth surfaces easily and reliably. Don't get stuck with mounts that won't stick! Order Yaesu Replacement Rubber Suction Diaphragms for your MMB-98 mount and anchor the mount securely.
Not Yet Reviewed
$5.99
Lido LM-2T Female Dual T AMPS Plates
Lido LM-2T female Dual T AMPS plates allow Dual T-Tab pedestals and mounts to be mounted directly to flat surfaces, such as car dashboards or consoles. These horizontal adapters measure 1.63 in. tall x 2.38 in. wide and mount onto any flat surface, a satellite radio, or other device with a 4-hole AMPS mounting pattern. Lido LM-2T female Dual T AMPS plates also provide a quick-release function for those wanting to attach and remove their devices frequently, and can also be used with vehicle-specific mounts.
Not Yet Reviewed
$4.00
DX Engineering Oval Decals
Ever need to adorn your ham shack with your favorite vendors and brands? DX Engineering oval decals offer you the opportunity to show your support! Our oval decal sheets are nicely printed, high-quality vinyl, DX Engineering stickers! These vinyl stickers may be applied to any smooth, relatively flat surface. Order your DX Engineering oval decals and show support for your favorite amateur radio vendor!
Not Yet Reviewed
$1.99
ICOM Hardware
ICOM offers miscellaneous parts, including hardware for ICOM products.
Not Yet Reviewed
$1.99
La Crosse Technology Waterfall Rain Gauges
La Crosse Technology Waterfall Rain Gauges are calibrated tubes or boxes, open to admit rain, and marked to indicate the amount of liquid rainfall. A manual rain gauge must be emptied after each rainfall in order to guarantee correct measurement. Rainfall amount is defined as the depth of water that reaches the ground, typically in inches or millimeters (25.4 mm equals one inch), for each rainfall event. An inch of rain is water that would be one inch deep if not absorbed or evaporated. Times of drought, and the dangers of flash floods when we receive too much rain, are a concern for us all. For some folks; such as gardeners, farmers, and weather professionals, rain data is essential information. For the rest of us, collecting and tracking rainfall information with a rain gauge may be fun and fascinating! Weather Geeks take note: La Crosse Technology Waterfall Rain Gauges are an easy way to track daily rains. Get one for yourself from DX Engineering!
Not Yet Reviewed
$8.59
—
$8.99
Clearance
SOTAbeams Filter Boards and Band Component Kits
SOTAbeams Filter Boards and Band Kits are used for the WSPRlite Classic, WSPRlite Flexi, or for your own QRP transmitter, SDR front-end filter projects or on any receiver. Choose the Low Pass Filter Board and Band Kit components for the specific bands on which you want to use your WSPRlite. Build these high performance seven-element Chebyshev low pass filters to eliminate harmonics and spurs. They function bi-directionally and may be used for QRP transceivers or for receive. Each board features a manual band change jumper header and comes with a SMA male cable to connect to the WSPR lite and a board mount SMA female connector for your antenna feedline adapter or adapter cable. SOTAbeams Filter Boards and Band Kits are available in four versions. These three have a revised board layout: - SBM-LOWPASSKIT Low Pass Filter Kit for 160, 80 and 40 meters, version 1.2 Board - SBM-LOWPASSKITHB Low Pass Kit for 20, 15 and 10 meters, version 1.2 Board These two include the filter components, connector and one cable. - SBM-PCB3BLPF Low Pass Printed Circuit Board only, version 1.2 Board. This kit includes only the board, SMA connector and one cable. Add to your cart the specific component Band Kits for the bands you want to use. All 11 bands are available from 160-6 meters. After you finish building one of these three boards, it fits into the updated accessory enclosure model DXE-LPFV1-2-CASE. NOTE: These three version 1.2 Boards DO NOT fit into the DXE-SB-LPF-CASE -------------------------------------------------------------------------------------------------------------- - SBM-LPFKITDXEPCB Low Pass Filter Kit for 160, 80 and 40 meters, version 1.1 Board. This kit includes band filter components, connector and one cable with the old PCB. When this v1.1 kit completed, it is the only board that fits into the original DXE-SB-LPF-CASE. (NOTE: This v1.1 board does not fit into the updated DXE-LPFV1-2-CASE which fits only v1.2 boards). --------------------------------------------------------------------------------------------------------------- Buy and build more than one SOTAbeams Filter Boards and Band Component Kits to use your WSPRlite Classic or WSPRlite Flexi on more than three bands. Don't forget to add the adapters shown in suggested parts. These low pass filters also work on QRP transmitters and all receivers. DX Engineering is your source for SOTAbeams and WSPRlite products and accessories.
( 3 )
$12.99
$7.79
La Crosse Technology Indoor/Outdoor Thermometers
La Crosse Technology Indoor/Outdoor Thermometers are available in a wide range of sizes, colors, and capabilities. Choose them for their temperature functions, humidity, solar power, clock, or daily minimum and maximum recorded values. Wireless outdoor sensors provide the ultimate in installation convenience! You may choose a unit with a monochrome or color display to track your indoor and outdoor comfort levels. Whatever your desire for home-based comfort data may be, La Crosse Technology Indoor/Outdoor Thermometers from DX Engineering can help you decide what to wear!
( 3 )
$5.99
bhi DESKTOP FEET
Want to make your bhi DESKTOP DSP Speaker more skid proof? This set of three self-adhesive rubber feet will do the trick! You get two 16mm feet and one that is 6mm. The 16mm feet fit next to the front plastic feet and the 6mm foot installs onto the metal bracket. Order bhi DESKTOP FEET from DX Engineering and stabilize that speaker!
Not Yet Reviewed
$4.99
Lido LM-500H Replacement Components
From new adhesive pads to ball sockets and hardware, these Lido LM-500H replacement components are just what you need to keep your mobile mount in peak condition. If you've been the unfortunate victim of some mobile-mount mishap, Lido LM-500H replacement components from DX Engineering will save the day!
Not Yet Reviewed
$5.00
International AC Mains IEC Power Cords
International AC Mains IEC Power Cords have IEC 60320 C13 connectors, 1.8 m (6 ft.) black cords, three-wire 18 AWG (1 mm), rated to 10A, 250V, terminated to the three-prong plugs of these three different overseas regions: - Australia, Type I (AU1-10) - UK, Type G (UK1-13P, BS1363) - Europe, Type F (Schuko, EU1-16P, CEE 7/7) The IEC 60320 (IEC 320 C13) power connector is the three-prong plug in hundreds of common devices that run on house mains: - Power supplies - Computers - Electronics - Rack mounted units - Amplifiers NOTE: These power cords do not fit any USA or continental North American outlets. Order International AC Mains IEC Power Cords from DX Engineering.
Not Yet Reviewed
$6.99