Station Accessories
Availability
Station Accessories - tune controls, keying switches, ferrite beads, sequencers, QSL displays & more
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog...
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog clocks, weather stations and outdoor reporting systems, stands and mounting solutions, equipment covers, display cases, enclosures, Arduino modules, programming and remote operation software, and snap-on ferrite beads for RF suppression. Plus we've got outdoor camping equipment, sequencers, hand and foot switches, low-pass filters, and so much more. DX Engineering is your station accessories headquarters. Start shopping now!
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog clocks, weather stations and outdoor reporting systems, stands and mounting solutions, equipment covers, display cases, enclosures, Arduino modules, programming and remote operation software, and snap-on ferrite beads for RF suppression. Plus we've got outdoor camping equipment, sequencers, hand and foot switches, low-pass filters, and so much more. DX Engineering is your station accessories headquarters. Start shopping now!
DX Engineering Foot Switches
DX Engineering Foot Switches are pedal-type switches used for conveniently keying transceivers, amplifiers and other radio or electronic equipment. Available in three styles, these foot switches will suit any ham's equipment keying requirements. Choose from a lightweight, economical and highly visible yellow-plastic switch; or a cast iron switch for extended durability, or an extra-wide cast iron switch for rugged convenience. These well-built, momentary-contact switches feature spring-loaded pedals that are built into tough bodies with slip-proof foot pads and rubber feet that promote positive, reliable switching again and again. Use one of these fine DX Engineering Foot Switches for your PTT keying and switching needs!
( 129 )
$65.99
—
$181.99
DX Engineering Ferrite
DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.
( 198 )
$27.99
—
$116.99
DXPatrol v3.0 GPS Disciplined Oscillators
DXPatrol v3.0 GPS Disciplined Oscillators (GPSDO) deliver laboratory grade frequency precision by disciplining a high quality OCXO with continuous GPS correction. Designed for applications where absolute accuracy and long term stability are essential, this third generation model provides exceptional performance in a compact, easy to deploy package. A GPSDO ensures its output never drifts over time, which is crucial for RF, timing, measurement, and synchronization tasks across both amateur and professional environments. Using a U Blox 7N GPS reference driving a 10MHz CTI OCXO (0.05 ppb* stability), the DXPatrol v3.0 generates up to four programmable independent LVCMOS outputs from 350kHz to 350MHz, giving engineers and radio operators the flexibility to feed multiple devices from a single, ultra stable source. The clear OLED display provides instant visualization of position, satellite lock status, and time information. Multi constellation support—GPS, GLONASS, and Galileo—ensures strong reception and rapid lock in under challenging conditions. For users who need highly accurate system time without relying on the Internet, the DXPatrol GPSDO v3.0 can act as a standalone precision time source. Operators can synchronize a PC directly to the GPSDO, making it ideal for isolated networks, secure installations, DXpeditions, remote stations, and any environment requiring dependable, offline timing for digital modes such as WSJT. Accessing the GPSDO is simple: scan the on screen QR code with a smartphone and instantly connect via Wi Fi to a built in configuration and status webpage. The unit operates from any 6–14VDC supply via a standard 5.5/2.5mm barrel connector, drawing 350mA during initial warm up and stabilizing at approximately 270mA. The DXPatrol GPSDO v3.0 is ideal for amateurs working with weak signal digital modes (FT8, WSPR, JT9), microwave and millimeter wave bands, SDR systems, and beacons, where even small frequency drift can degrade performance. Its stable 10MHz reference ensures precise tuning for high frequency transverters, consistent calibration for test equipment, and reliable synchronization in remote or Internet isolated stations. From EME enthusiasts to portable microwave rovers, the GPSDO v3.0 provides the rock solid frequency foundation advanced operators depend on.
Not Yet Reviewed
$275.99
Summit Racing™ 20V Lithium Battery Chargers
Designed specifically for Summit Racing™ batteries, our Summit Racing™ 20V lithium battery chargers keep our 20V Max 2.0 and 4.0 Ah lithium-ion battery packs ready to go to work for you. The chargers provide the batteries with optimal runtime to power our cordless power tools through any job or chore.
Not Yet Reviewed
$13.99
RT Systems Radio Interface and Programming Cables
RT Systems Radio Interface and Programming Cables are assembled in the USA from quality parts to provide improved durability. To provide quality control, each cable is individually tested from radio to computer during manufacture. These cables are designed to address the specific computer/radio connection of each particular radio. Various cables are compatible with handhelds, mobiles, and HF rigs and receivers manufactured by Alinco, Wouxon, ICOM, Yaesu, Kenwood, Ten-Tec, and more. Many cables are only for programming. Other cables are only for control. Some cables do both! Most are USB, so when you need to connect your radio to your computer or laptop, these RT Systems Radio Interface and Programming Cables will let you get hooked up fast!
( 94 )
$25.00
—
$49.00
Lido L-MAX 2.0 Deluxe Heavy Duty Quick Release Seat Bolt Mounts
Lido L-MAX 2.0 Deluxe Heavy Duty Quick Release Seat Bolt Mounts combine the sturdy Lido L-MAX 2.0 Seat Bolt Mount with accessories to help make the most of the Lido L-MAX mount. Featuring an all-metal design with telescoping support arms that are adjustable from 15 to 23" in height. This set of arms is paired with a quick release base allowing for easy relocation into a second vehicle or removal if the space is needed for cargo or people. An additional foot provides support to help keep the mount stable and reduce vibration. Multiple seat bolt brackets are included to accommodate a large selection of vehicles. The L-MAX 2.0 can handle up to 8 pounds of weight attached to the mount, providing a stable platform for all your mobile radios. The deluxe version of this mount includes a lightweight aluminum extension plate allowing for mounting more than a single device on the mount. The extension plate also includes a central ¼-20 threaded hole for mounting to the L-MAX 2.0's standard ¼-20 stud. Two included ball mounts allow for mounting of of various control heads using either the built-in mounts (on applicable models) or the mounting brackets provided by the radio manufacturers. Several mic clip hangers are also included allowing for hanging of microphones with buttons on the back or ones designed for hooks.
( 1 )
$229.00
On Sale
RigExpert MATCH Advanced to RFE Upgrade License
The RigExpert MATCH Advanced to RFE Upgrade License is designed for professionals and enthusiasts working with radiofrequency (RF) systems, offering enhanced functionality for antenna and cable analysis with the RigExpert MATCH that has an existing Advanced license. With this ADV to RFE license upgrade, users can extend the operational range of their MATCH up to 500 MHz, making it ideal for a wide array of applications in telecommunications, broadcasting, and electronics diagnostics. The RFE license is tailored for: - RF engineers and technicians diagnosing and maintaining transmission lines. - Network professionals optimizing antenna systems. - Hobbyists and researchers delving into RF analysis within their licensed frequency range.
( 2 )
$100.00
$90.00
RT Systems Radio Programming Software
RT Systems Radio Programming Software makes it easy for you to set up the memory channels and other menu parameters in your radio. It's designed for hundreds of specific models including brands like Alinco, Baofeng, ICOM, Kenwood, Jetstream, Wouxon, Yaesu and many others. RT Systems software lets you program your specific radio easily, without having to work your way through choices that don't relate to your needs or your radio model. RT Systems Radio Programming Software is available for either Windows OS or Mac OS depending on the radio Upon entering your purchased license key on the RT Systems website, you are prompted you to choose the version of the RT Systems Radio Programming Software you wish to download, either Microsoft Windows or MacOS depending on the radio. The software is downloaded directly from the RT Systems secure website where you register your software at the same time. Use the straightforward checkboxes, lists, and edit boxes to prepare your radio just as you want it to be! Options for programmable memories, hyper-memories, D-STAR settings, ARTS, APRS, and customized sounds, as they apply to a particular radio, are located in the 'Settings' files of the programs. By having one complete system, designed specifically for compatibility between the computer and the radio, you know that any question about data transfer between the radio, software, and cable can be easily answered. There will be no need to "second-guess" an unknown issue between them. What are you waiting for? Unlock the power of your radio's programmable features! Order your RT Systems Radio Programming Software from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 327 )
$17.49
—
$69.95
Lido LM-802-705 Cup Holder Mount for IC-705 and FTX-1 Field
The Lido LM-802-705 cup holder mount for IC-705 and FTX-1 Field is a heavy-duty accessory designed for heavy control heads. The base expands out to 3.5 in., and the mount is 9 in. in height, but can be adjusted using the swivel system. This mount is built around Ram's 1 in. ball system, so it will swivel into just about any position you need it to. It comes with a 1/4 X 20 bolt that will thread directly into the Icom IC-705, Icom IC-7100 or Yaesu FTX-1 Field control heads.
( 8 )
$59.95
JOES Racing Products Switch Panels
JOES Racing Products offers a variety of high-quality switch panels from ignition to start to accessory panels. JOES Racing has numerous panel combinations to meet your needs. The ignition switches feature an aircraft-style flip cover, while start and accessory switches have waterproof boots to seal out moisture and dirt.
Not Yet Reviewed
$56.99
—
$113.35
NANUK Equipment Cases
NANUK Equipment Cases are designed to protect your most sensitive equipment in even the harshest environments. Whether battling the scorching heat of the Sahara or the bone chilling cold of the Arctic, every detail of NANUK cases has been refined and perfected to offer the utmost in protection and performance. All NANUK Equipment Cases offer these unique qualities: * Waterproof; watertight to IP67 standards** * High performance gasket * Lightweight NK-7™ resin construction * Impact resistant** * Crushproof * Dustproof** * Powerclaw™ latching system * Soft grip foldable handle * Accepts padlock * 100 percent stainless steel hardware * Automatic pressure release valve (for air travel) * Molded-in bezel system * Integrated lid stay * Stackable ** Certified to have passed ATA300 impact standards, ASTM D4169 impact, rain, vibration and drop tests, Mil-STD-810F immersion test and IP67 ingress protection tests. From their high-impact NK-7™ resin to their PowerClaw™ latches, NANUK cases have been engineered and manufactured to stringent military specifications and are able to surpass the needs of the most demanding users. These virtually indestructible, lightweight, watertight cases offer the ultimate grade of protection in a variety of sizes, configurations and colors. Simply choose a model based on your physical volume requirements and choice of hue. Complemented by a large selection of optional accessories, like foam inserts and padded dividers, and offering an incredible degree of customization, NANUK cases are the best choice to move your equipment in complete security. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment in the urban jungle, NANUK Equipment Cases are up to the challenge!
( 13 )
$39.95
—
$499.95
La Crosse Technology 14 in. UltrAtomic Analog Wall Clocks
La Crosse Technology 14 in. UltrAtomic analog wall clocks are the first Atomic clocks on the market that receive the new phase modulated enhanced WWVB broadcast signal, recently introduced by NIST. This advanced technology allows the radio time signal to "break through" barriers like cement walls that previous versions could not. This radio-controlled clock has greatly improved reception and reliability, making it a great addition to any office complex, school or home. This line of products is the first the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The new WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode Order the La Crosse Technology model 404-1235UA-SS 14 in. UltrAtomic wall clock from DX Engineering!
( 2 )
$96.99
Chelegance JCASE-891 Yaesu FT-891 Protective Go Box Cases
Chelegance JCASE-891 Yaesu FT-891 Protective Go Box Cases shield your Yaesu FT-891 from the elements. The Yaesu FT-891 is a popular choice for portable operations and protecting the radio from the elements. This case allows for fast setup of the radio as all that is needed is to open the case, connect the power and antenna and then everything is set up to transmit. There is extra space in the lid to leave the microphone connected to the jack and close the lid. Panel mounted jacks allow for easy connection to the external speaker, remote/ALC and key jacks. A pair of fans and inflow vents help to provide adequate airflow to keep the radio cool, even at 100 watts. The exterior of the JCASE-891 measures 11.02 inches by 14.17 inches by 7.09 inches and weighs in at 7.72 pounds empty. The aluminum plate mounted inside the case provides a stable and secure place for mounting the radio and control head and the angle of the head has some adjustment to allow for optimum viewing angle. A rubberized handle provides comfort while carrying the case and there is a place to attach a carrying strap as well. Additional Feature and Specifications: External Dimensions: 11.02x14.17x7.09 in. Internal Dimensions: 9.25x13.19x4.13 in. Weight: 7.72 lbs. (empty weight)
Not Yet Reviewed
$372.99
Gator Cases Pro Series Wheeled Equipment Rack Cases
Gator Cases Pro Series Wheeled Equipment Rack Cases are crafted from rotationally-molded polyethylene, a process which makes these cases virtually indestructible. They include full size front and rear removable lids with recessed steel "butterfly" twist latches that secure the lids onto the case. Integral ergonomic side handles provide easy access for carrying the case. Transportation of Pro Series Wheeled Equipment Rack Cases is easy with built-in rugged roller-blade style wheels and a telescoping tow handle. Non-slip rubber feet on the bottom of the case mate with indentations on the top for easy stacking of multiple Pro Series cases. Gator Cases Pro Series Equipment Racks include threaded front and rear rails in the industry standard 19 inch width, in a variety of heights and in two case depths. Equipment racks and their vertical mounting rails have standardized threaded hole spacing and rack panel heights for mounting equipment. Designated in Units, one rack unit - 1U- is equivalent to a 19 inch wide panel that is slightly less than 1.75 inches, for panel clearance. For example, a rack designation of 4U has a vertical panel space that is about 7 inches tall, and the 6U rack has 10.5 inches of vertical panel space, and so on, with the overall case structure height always greater. Professional equipment manufacturers produce rack mounted equipment that is typically 1U, 2U, 3U or multiples of those heights. Rack shelves, panels, screws and drawers are available to accommodate radio equipment and accessories that are not built for rack mounting. Gator Cases Pro Series Wheeled Equipment Rack Cases and accessories are ideal for building the complete self-contained Amateur Radio go-kit. Gator Cases are designed for the audio and performance professional and serve perfectly for Amateurs and individuals supporting Emergency Communications. For those who prefer a professional option to easily transport and store radio and electronic equipment, Gator Cases have arrived at DX Engineering.
Not Yet Reviewed
$289.99
—
$329.99
NANUK Wheeled Equipment Cases
NANUK Wheeled Equipment Cases give you all of the standard benefits and capabilities of their regular cases, but add wheels and a retractable handle for easy, on-ground transport. These cases are designed to protect your most sensitive equipment in even the harshest environments. Whether battling the scorching heat of Death Valley or the bone chilling cold of the Arctic, every detail of NANUK wheeled cases has been refined and perfected to offer the utmost in protection and performance. NANUK wheeled cases offer these great features: * Soft grip foldable carry handle * Polyurethane wheels * Spring-loaded retractable handle * Waterproof; watertight to IP67 standards * High-performance gasket * Powerclaw™ latching system * Accepts padlock * Lightweight NK-7™ resin * Impact resistant * Crushproof * Dustproof * 100 percent stainless steel hardware * Automatic pressure release valve (for air travel) * Molded-in bezel system * Removable lid * Integrated lid stay * Stackable From their high-impact NK-7™ resin to their PowerClaw™ latches, NANUK wheeled cases have been engineered and manufactured to stringent military specifications and are able to surpass the needs of the most demanding travelers. These virtually indestructible, lightweight, watertight cases offer the ultimate level of protection in a variety of sizes, configurations and colors. Simply choose a model based on your physical requirements and in your choice of various colors. Complemented by a large selection of optional accessories, like foam inserts and padded dividers, and offering an incredible degree of customization, NANUK wheeled cases are the best choice to move your equipment in complete security. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment as you dash through the airport, NANUK Wheeled Equipment Cases are up to the challenge!
( 1 )
$219.95
—
$644.95
Napier Sportz Avalanche Truck Tents
Do you drive an open-bed Chevrolet Avalanche or Cadillac Escalade EXT? Napier Sportz Avalanche truck tents offer the perfect fit, creating a comfortable, restful sleeping area for two adults. No matter the terrain or weather, you're guaranteed a blissful night sleep in the great outdoors. Features include: * Made of high-quality polyester taffeta with polyethylene floor * Exclusive fully enclosed floor, keeping you clean and dry from the elements * Spacious interior with over 5.6 ft. of headroom * Full rainfly and built-in storm flaps (windows and door) provide ultimate weather protection and privacy * Large 4 ft. x 4 ft. awning provides shade and a protected spot for bulky gear * Rear panel allows you to access the truck's interior * 2 large windows and 2 ceiling vents offer optimal ventilation * Keep organized with an internal gear loft, gear pocket, and a built-in lantern holder * Expandable carrying bag for easy storage * Color-coded poles make setup a breeze
Not Yet Reviewed
$309.99
Summit Racing™ 20V Fast Chargers
Power up your lithium battery packs quickly with our Summit Racing™ 20 V fast chargers. They feature red/green LED charging indicators, full protection for safe operation, and a powerful cooling fan. The chargers are compatible with all Summit Racing™ 20V power tool batteries. Keep your batteries ready for use with our 20V fast chargers. Specifications: * Charging current: 4.0 amps * Charging time: -- 42 minutes (2.0Ah) -- 1 hour 18 minutes (4.0Ah) -- 1 hour 54 minutes (6.0Ah) -- 2 hours 18 minutes (7.5Ah) * Charging temperature range: Between 32 degrees F (0 degrees C) and 113 degrees F (45 degrees C)
Not Yet Reviewed
$29.99
ICOM IP Remote Control Software
ICOM IP Remote Control Software allows you to operate your Icom radio, even when you're not there! Utilizing your home network, the Internet, or a USB cable (direct PC connect) you can operate your rig from another room--or another region! Some versions of the remote control software works with several present model Icom transceivers and some discontinued late model Icom transceivers. Different software is available for specific ICOM receivers. Best results are achieved with high speed Internet service at each end of remote operation and the software requires a Windows 10 or Windows 11 client end computer . NOTE: For additional product information, please check for hyperlinked files in the Documentation section of the part detail page. Not sitting in front of your radio? It's no problem when you've installed ICOM IP Remote Control Software.
( 36 )
$159.99
—
$229.99
JOES Racing Products Universal GoPro Mounts
JOES Racing Products universal GoPro mounts are mobile and media device mounting accessories that are designed to swivel and pivot—so you can aim your camera to get the perfect shot. The high-quality aluminum adapters are stronger and more stable than other brands, allowing you to get cleaner videos and reducing the chance of you losing your GoPro.
Not Yet Reviewed
$79.95
On Sale
Napier Sportz Dome-to-Go Tents
Napier Sportz Dome-To-Go tents are the only tents on the market designed to fit hatchback cars and small CUVs. They quickly convert your vehicle into a dry and comfortable camping solution in less than 15 minutes, allowing you to sleep in the cargo area of your vehicle, high and dry above the ground. If you prefer sleeping on the ground, leave your gear in the cargo area, safe and easily accessible from inside the tent. The tent quickly detaches from the vehicle and instantly converts to a ground tent. Features include: * Adjustable vehicle sleeve designed to accommodate hatchback cars and CUV's. * Seamlessly connects to the cargo area of your vehicle * Spacious 8.5 ft. x 8.5 ft. ground tent providing over 6.5 ft. of headroom and comfortable sleeping space for 4 adults * Full rainfly with taped seams and built-in storm flaps in the windows and doors * Large 6 ft. x 6 ft. optional awning provides shade and added living space * 2 large doors and 3 mesh windows offer optimal ventilation * Keep your gear organized with a gear loft, gear pocket, and lantern holder * 10-minute set-up * Expandable carrying bag makes for quick and easy storage
( 1 )
$299.99
$254.99
Sierra Radio Systems Universal Relay Control Modules
Sierra Radio Systems Universal Relay Control Modules allow you to control various commercial antenna switches via the system's NodeRed dashboard. This control module can be used to control or emulate the control box for the following antenna switching devices: • 1 of 8 (high side) (DXE-EC-8) • Dual Vertical Array Control Console • BCD Control Console • Pro-Stack Broadband Three Antenna Phasing Relay Unit. • Pro-Stack Broadband Two Antenna Phasing Relay Unit. • CC-8A Control Console • Hi-Z Antenna - 3 Element Array Swtiching • Hi-Z Antenna - 4 Element Array Swtiching • Hi-Z Antenna - 4-8 Pro 8 Element Array Swtiching • Hi-Z Antenna - 8 Element Single Band Arrays
Not Yet Reviewed
$250.00
Icom Radio Dust Covers
Icom Radio Dust Covers are a stylish way to protect your expensive Icom Radio from dust and scratches. Each one is custom designed to fit a specific radio, featuring an embroidered Icom logo and the model number of the radio under it, this synthetic leather cover is as stylish as it is practical. The inside of the cover is a soft brushed felt which will protect the finish of the radio as well as protect the display from scratches. An open back on the cover allows all the cables to remain connected, meaning that when you're ready to operate, all you have to do is remove the cover and you're ready to go. Order an Icom Radio Dust Cover to protect your Icom Radio today!
Not Yet Reviewed
$75.00
Milwaukee M12 Radio Plus Chargers
Milwaukee M12 Radio Plus Chargers are a great jobsite audio solution that delivers unmatched versatility for its size, allowing users to charge up, and turn up the sound with a full-range speaker, a tweeter, and the portability for the freedom to hang it up wherever you go. Streaming via Bluetooth seems to be more popular these days, but it's also nice to be able to tune into a radio station. These IP54 rated Bluetooth radios can be powered via a M12 battery or AC adapter, with the same 12V DC barrel jack also powering the battery charging feature. The M12 Radio Plus Charger also has a built-in USB charging port with 2.1A output. Milwaukee M12 Radio/Charger features and specs: * Connectivity: Bluetooth 4.2 for streaming music and AM/FM radio * 100 ft. Bluetooth range * Full-range speaker and tweeter deliver clear mids and highs * AM and FM radio tuner button for treble or bass adjustment * 10 radio presets * 6 ft. AC adapter * Self-centering keyhole and hollow handle offer various hanging options * 2.1A USB charging output delivers fast electronic device charging * IP54 water and dust resistance * No-interference battery charger * Up to 10 hours runtime with CP 2.0Ah battery * Dimensions: 5.39 in. x 9.21 in. x 5.67 in. * Weighs approximately 3.68 lbs.
Not Yet Reviewed
$169.00
The Radio Source Lowdown 630-Meter Lowpass Filter
The Radio Source Lowdown 630-Meter Lowpass Filter makes it possible to explore the 630-meter band with a MARS-modified HF transceiver with the confidence that you will be transmitting a clean signal. This lowpass RF filter is designed to allow you to use your existing equipment to transmit on the 630-meter band with a signal that meets FCC requirements for harmonic and spurious emissions. Install this filter at the output of your Amateur Radio transceiver using 50-ohm coaxial cable and PL-259 connectors. It mitigates harmonics and spurious emissions above the 472-479 kHz (630m) band. Remove the plastic caps that cover the coaxial connectors. The filter may be installed with either end connected to the transceiver or to the antenna system. For indoor use only.
Not Yet Reviewed
$185.00