Station Accessories
Availability
Station Accessories - tune controls, keying switches, ferrite beads, sequencers, QSL displays & more
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog...
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog clocks, weather stations and outdoor reporting systems, stands and mounting solutions, equipment covers, display cases, enclosures, Arduino modules, programming and remote operation software, and snap-on ferrite beads for RF suppression. Plus we've got outdoor camping equipment, sequencers, hand and foot switches, low-pass filters, and so much more. DX Engineering is your station accessories headquarters. Start shopping now!
You’ve got a good-performing station. We’ve got station accessories to make it even better. So why look anywhere else? DX Engineering has all types of digital and analog clocks, weather stations and outdoor reporting systems, stands and mounting solutions, equipment covers, display cases, enclosures, Arduino modules, programming and remote operation software, and snap-on ferrite beads for RF suppression. Plus we've got outdoor camping equipment, sequencers, hand and foot switches, low-pass filters, and so much more. DX Engineering is your station accessories headquarters. Start shopping now!
DX Engineering Ferrite
DX Engineering Ferrites are partially magnetic metal and ceramic mixes available in a variety of forms, including toroid core, bead type and plastic-covered split-bead ferrite called snap-beads. They are used in a myriad of RF suppression applications to mitigate RFI (radio frequency interference) as well as to reduce pulse and other types of RF noise interference. Special ferrites are used for experimentation and electronic circuit building and for making transformers, RF chokes and antenna baluns. The variations of magnetic and non-magnetic metals and non-metal ceramics used to make ferrites are called "Mixes" and each has different radio frequency properties or ranges. Therefore, different mix number ferrites are typically used for different applications within those ranges, determined by decades of experiments by engineers and applications by hams. Each Mix has been assigned a color code to help identify the ferrite, so numerical labeling is not used on the metal. Color coded ferrite can be identified long after the numbered package is discarded or has disintegrated with time. How do they work? Simply use snap-on beads on a cable or wire. An even more effective choke takes a few to several turns of a wire or cable through and around a ferrite snap-on bead or toroid core. This mitigates RFI to, or from, the connected RF noise producing or noise affected electronic device. The results can be very surprising. Solving noise and RFI can be frustrating. Due to the nature of RF and noise interference suppression; the techniques of appropriate use of ferrites can take a bit of trial and error, but are often the best solution for a difficult problem. Use DX Engineering Ferrite for an incredible range of electronic circuits, noise abatement and RF suppression projects. The details of DX Engineering Ferrite mixes and types appear in each product description. Sizes and applications are discussed in "More Details" and in the literature available at the "Documentation" tab of each of these products.
( 197 )
$27.99
—
$116.99
DX Engineering ISO-PLUS Ethernet RF Filters
DX Engineering ISO-PLUS Ethernet RF Filters are very effective EMI Suppressors that are quickly and easily connected inline on Cat5e or Cat6 network cables. Their patented* design provides common mode RF interference and EMI noise filtering of radio frequencies from well below 1 MHz to 100 MHz and beyond. DX Engineering ISO-PLUS Ethernet RF Filters have no effect on throughput; Ethernet data signal levels and speed remain unchanged. *US Patent No. 11,211,679 B2 Electromagnetic interference (EMI), also known as RF interference (RFI), can be imposed onto your received radio and data signals from many electronic devices normally found around a residence, a radio room or a business network. Areas of major concern are the Gigabit Ethernet Cat5(e) and Cat6 cables used for network (LAN) connections between personal computers, printers, multi-port switches, cable modems, routers and radio transceivers, and between many other devices. DX Engineering ISO-PLUS RF filters, installed on both ends of Ethernet cables, work two ways. First, they can mitigate RF interference caused to the Ethernet connected device. Second, they can reduce interference to radio receivers and other Ethernet devices that is caused by RFI or EMI generated by an Ethernet connected device. ISO-PLUS filters are sold in pairs and are normally installed at each end of an Ethernet cable; one filter at the RJ-45 Ethernet plug of the first device and the other filter at the RJ-45 Ethernet plug of the second device. Each ISO-Plus comes with one six inch shielded RJ-45 patch cable (color may vary). They are designed to be installed in pairs; offered in a 2 filter package DXE-ISO-PLUS-2 or a 10 filter package DXE-ISO-PLUS-10. Click "More Details" below for additional information. DX Engineering ISO-PLUS Ethernet RF Filters are an important tool to improve productivity and radio reception of weak signals. "If you can't hear them, you can't work them." Order ISO-PLUS Ethernet RF Filters exclusively from DXEngineering.com
( 49 )
$81.99
—
$355.99
RedPitaya SDRlab 122-16
RedPitaya SDRlab 122-16 is a rigorously upgraded version of their revolutionary STEMlab board, redesigned specifically for SDR and other RF applications. It is capable from well below HF, with an emphasis on all of HF through the 6 meter band using popular SDR software. The SDRlab 122-16 board features a RF Input minimum frequency capability of 300 kHz (-3 dB) and no DC coupling using a low-power dual-channel 16-bit, 125 Msps ADC (Analog to Digital Converter) with 50 ohm inputs and a dual-channel 14-bit, 125 Msps DAC (Digital to Analog Converter) with 50 ohm outputs. The faster and more capable Dual Core ARM Cortex A9 Processor is paired with the larger Xilinx Zynq 7020 FPGA (Field Programmable Gate Array) and 512 MB RAM to provide phenomenal real-time processing capabilities. All together the SDRlab 122-16 provides improved dynamic range, sensitivity, with reduced distortion, noise & crosstalk. Plus, its hardware is compatible with HPSDR. SDRlab 122-16 has 50 ohm SMA female Inputs and Outputs, 1 GB Ethernet and USB 2.0 connectivity, and is Wi-Fi capable with a dongle. Up to 16 digital and 4 analog I/Os are provided by the Extension Connector. The Standard Kit comes with the RedPitaya SDRlab 122-16 board, comes with a 16 GB micro SD Card, 1m Ethernet cable and Universal Power Supply 5V, 2A. RedPitaya SDRlab 122-16 is a strong basis for your own SDR Transceiver. With a frequency range to 62.5 MHz and 16 bits of resolution it represents a powerful and affordable core of the SDR radio that you build. The on board ADC, running at 125 Million samples per second at 16-bit depth, digitizes the RF signal from the antenna with excellent dynamic range. The data coming from the ADC is processed by an in-phase/quadrature (I/Q) digital down-converter (DDC) running on the Red Pitaya's FPGA. I/Q data is transmitted via TCP to the SDR programs such as SDR# and HDSDR. Add an all bands filter and amplifier module, connect an antenna and you are ready to start your SDR adventure!
( 1 )
$1,229.99
bhi Ltd Six Way Switch Box
Don't keep disconnecting cables...get a switch box! If you need to connect more than one piece of equipment to your bhi Noise Eliminating Speaker or In-Line Module, the Six Way Switch Box is the answer. It allows up to 6 pieces of equipment to be connected to a noise eliminating speaker, in-line module or extension speaker. The Six Way Switch Box features: * Three inputs loaded at 8 Ohms * Three un-loaded inputs for low level microphone signals * Dimensions (WHD): 4.13 x 1.57 x 2.95 in. (105 x 40 x 75mm) * Supplied with two 4 ft. audio cables with 3.5mm mono plugs Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. You like your DSP stuff. Switch it up! Order a bhi Ltd Six Way Switch Box from DX Engineering and process all that audio!
( 2 )
$55.99
bhi Ltd Mini Switch
No more messing around with cables! The new bhi Mini Switch is a compact two-way switch box enabling the connection of two radios to your bhi DSP noise cancelling product. Supplied with two 3.5mm mono audio cables, they're ready to connect to your radios! The Mini Switch features two mono 3.5mm input jacks, one 3.5mm mono output jack and one cable with 3.5mm mono plug. It is supplied with two ALD-001 3.5mm plug to plug cables! Power handling is 3 watts maximum and the unused input is always terminated with a load to protect your audio outputs. Velcro pads are supplied to securing of the Mini Switch to your radio equipment. All connections are 3.5mm mono and audio adapters will be required to convert other types of connections. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. The Mini Switch is a compact 2.09 x 1.46 x 1.73 in. (53 x 37 x 44mm) so it will fit just about anywhere in you operating position. You normally use one rig at a time. Switch one DSP unit between them with bhi Ltd Mini Switch units from DX Engineering!
( 3 )
$42.99
bhi Dual In-Line Mounting Stand
The bhi DL-STD1 Dual In-Line Mounting Stand is made from quality high-impact clear acrylic and is ideal for mounting the Dual In-Line noise cancelling In-line Module. The module simply sits horizontally in the stand allowing you to see and operate all the controls more easily. The audio and power cables can be routed from the top and to the rear for a neat installation. The headphone socket on the Dual In-Line is easily accessible from the side of the unit. The bhi DL-STD1 Dual In-Line mounting stand is made from quality high-impact clear acrylic and is ideal for mounting the Dual In-Line noise cancelling In-line Module. The module simply sits horizontally in the stand allowing you to see and operate all the controls more easily. The audio and power cables can be routed from the top and to the rear for a neat installation. The headphone socket on the Dual In-Line is easily accessible from the side of the unit. The stand comes boxed with Velcro for fixing the unit more securely to the stand.
Not Yet Reviewed
$17.99
Antennas-Amplifiers 6343 2m/70cm 1500W Low Pass Filters
Antennas-Amplifiers 6343 2m/70cm 1500W Low Pass Filters are engineered for clean, reliable operation within the 2-meter and 70cm amateur bands. Designed to pass all signals within its specified 144-148 and 430–450 MHz operating range while sharply attenuating higher frequency signals, it effectively suppresses harmonics and out of band emissions that can compromise signal quality or cause interference. Built for demanding high power environments, these filters support up to 1500W, and feature a 12VDC cooling fan, and durable N Type female connectors for low loss, secure connections. Antennas Amplifiers stands out as a premier innovator in high performance RF solutions, offering one of the largest selections of ham radio antennas, low noise components, and advanced band pass filters in the industry. Their filters are engineered with sophisticated high Q designs, exceptionally low insertion loss, and durable construction—qualities that make them ideal for both receive and high power transmit applications in demanding multi station, contest, and DX environments.
Not Yet Reviewed
$452.99
DX Engineering Logo UltrAtomic® Wall Clocks
DX Engineering Logo UltrAtomic® Wall Clocks feature dramatically improved reception and reliability, to automatically set and keep time, even at daylight saving time changes. Excellent readability and attractive styling make this special DX Engineering 14 inch analog clock a great addition to any Amateur Radio station, office complex, school or home. The UltrAtomic receives the enhanced phase modulated WWVB broadcast signal introduced by NIST in 2012. This advanced technology allows the radio time signal to "break through" barriers like cement walls, unlike previous PWM only Atomic clocks. This is the DX Engineering version of the La Crosse Technology wall clock that was the first on the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting, especially UTC/GMT. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The phase modulated WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode
( 4 )
$89.99
La Crosse Technology 14 in. UltrAtomic Analog Wall Clocks
La Crosse Technology 14 in. UltrAtomic analog wall clocks are the first Atomic clocks on the market that receive the new phase modulated enhanced WWVB broadcast signal, recently introduced by NIST. This advanced technology allows the radio time signal to "break through" barriers like cement walls that previous versions could not. This radio-controlled clock has greatly improved reception and reliability, making it a great addition to any office complex, school or home. This line of products is the first the market to be based on this enhanced broadcast, offering unparalleled reception. UltrAtomic clocks operate even in the harshest conditions, where the signal-to-noise ratio interferes with radio-controlled clock reception using the legacy AM signal broadcast. UltrAtomic technology digitally processes the received signal via an integrated circuit within the clock. It leverages the advanced modulation scheme and new data encoding. The reception reliability of the technology has been validated in the most challenging locations and scenarios and has been demonstrated successfully throughout all of North America. UltrAtomic clocks allow you to select any time zone with a custom setting. Now you can enjoy UltrAtomic accuracy, while viewing any time zone around the world. The new WWVB broadcast provided by the National Institute of Science and Technology (NIST) includes a notification for the daylight savings time transitions well ahead of when they are to occur. The UltrAtomic clock reads and stores this information and, at the appropriate instance, automatically advances the hands one hour in the spring and eleven hours in the fall (to move back one hour), even if the signal is not received on the day of the transition. * UltrAtomic time with manual set option * Barrier-resistant signal reception with dual antenna that is insensitive to orientation * Adjustable time and zone (24 hour World Time) from UTC+0h to -11h * Eco Mode extends battery life--turns second hand off from 11 pm to 5 am * Q-Mode (Quartz Mode) for manual time setting * Automatically updates for daylight saving time (with DST On/Off option) * 14 in. stainless steel frame bezel * Glass lens * Black metal hands and black numerals on white background * Low battery detection indicator--second hand stops at 6 * Powered by 2 or 4 high-quality "C" LR14 batteries (not included) for up to 3 or 6 years of operation in Eco Mode Order the La Crosse Technology model 404-1235UA-SS 14 in. UltrAtomic wall clock from DX Engineering!
( 2 )
$96.99
I0JXX SEQJXXBOX Sequencers
I0JXX SEQJXXBOX Sequencers are advanced switching control units for preamplifiers, power amplifiers, transceivers and transverters typical of VHF, UHF and SHF amateur and commercial radio systems. When using independent low-noise mast-mounted or inline preamplifiers and inline power amplifiers, the correctly sequenced timing of PTT and disconnect signals must be sent before keying a transceiver or transverter. The required task of preventing preamplifier burnout, power amplifier hot switching and potential relay damage is very well handled by the SEQJXXBOX. Featuring independently configurable time delay sequencing for SSB and CW modes, the SEQJXXBOX has four separate output relays which are tied in series to ensure the proper switching sequencing of every critical component in the receive-transmit chain. Configurations and functions are entered with a four-button control and Status info in RX and TX is displayed on a 2x16 alpha-numeric blue-tone readout. Independent front panel switches for turning on or off the Preamp, the Power Amp, and the Sequencer, along with programmable control over CW Break-In and relay timing provides intuitive and helpful operational flexibility. Two rear panel 8-screw barrier strips handle all input and outputs, so simple stripped lead wiring is required from all peripheral components. A simple Foot Switch for SSB PTT is provided with each unit. FEATURES of the I0JXX SEQJXXBOX Sequencer: • Switching delay time RX>TX TX>RX Every mode from 50 to 500 mS (step 10 mS) • Switching delay time CW TX>RX from 100 to 900 mS (step 100 mS) • CW Break-In operations configurable (enabled by default) • Name or Call Sign on display (up to 6 alphanumeric characters) • Display lighting 2 modes: always on / on only during configuration SPECIFICATIONS of the I0JXX SEQJXXBOX Sequencer: INPUT: MIC-PTT (foot switch) CW-KEY (3 contacts, straight key or Iambic paddle Display: LDC 2 lines per 16 letters, blue color (with contrast adjustment) Menu access: 4 front panel pushbuttons Power Requirement: 12 VDC @ 180 mA TX; 40 mA RX. (No internal battery) Dimensions, WHD: 3.937 x 1.969 x 4.331in. (100 x 50 x 110mm) Weight: 1.343 lbs. (650 g) The I0JXX SEQJXXBOX is an indispensable tool for proper and successful operation of each crucial component in a VHF, UHF, or SHF station.
Not Yet Reviewed
$229.99