Availability
ROHN Towers
ROHN Tripod Roof Towers
ROHN tripod roof towers or TRTs feature a universal mast clamp that is capable of mounting masts with up to 1 3/4 in. diameters and swivel feet that adjust to the pitch of almost any roof. Installation is simple and fast with lag screws or bolts (not included) through the feet that securely anchor the towers for long, trouble-free service. ROHN tripod roof towers feature a lower mast support bracket and hot-dip galvanized construction for corrosion protection.
( 25 )
$129.99
—
$159.99
ROHN Tower Section Joint Bolt Kits
DX Engineering not only offers ROHN tower products, but their accessories as well! ROHN tower section joint bolt kits are available for the 25G, 45G, and 55G towers. Each kit has the necessary bolts and nuts to fasten one section to another. Bolts are galvanized for long lasting protection. Do you want the best? See the ROHN tower products and installation accessories at DX Engineering!
( 16 )
$19.99
—
$43.99
ROHN Telescopic Mast Roof Mounts
ROHN Telescopic Mast Roof Mounts are completely assembled for a quick and easy flat or peaked roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter. These mounts allow tall masts to be swung up or down along the ridge of the roof. The bottom of the mast inserts into the hinged base and is secured by set screws. This feature permits the user quick and safe access antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these ROHN Telescopic Mast Roof Mounts supply the base-support and convenience that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, peaked roofs, concrete pads, or just about anything! Fixed or telescopic masts are an inexpensive solution to raising antennas! These ROHN Telescopic Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!
( 1 )
$155.99
ROHN Tower Work Platforms
ROHN Tower Work Platforms are essential for working long periods on the tower. They simply snap into place on ROHN G Series Towers. They are easily positioned and repositioned at any level, since no mounting bolts are required. Save your feet and legs from the pain of standing on the skinny cross bracing. ROHN Work Platforms (ROH-WP25G / WP45G / WP55G ) have been designed to meet the TIA 250 lbs. load requirement. This includes the weight of the safety equipment harness, lanyard and tools on your tool belt. Anything over that would require a review by a local engineer. Get your ROHN Tower Work Platforms from DX Engineering today!
( 9 )
$249.99
—
$449.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$47.99
—
$567.99
ROHN Guy Bracket Assemblies
Keep your tower still with one of these ROHN Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each ROHN tower series. ROHN Guy Bracket Assemblies are built from quality steel and are galvanized, the same as the towers, and install in minutes with no modifications or disassembly of the tower required. Call DX Engineering to order your ROHN Guy Bracket Assemblies today!
( 5 )
$279.99
—
$549.99
ROHN Tower Adjustable House Brackets
ROHN Tower Adjustable House Brackets include the standard duty models for wall and eave bracing of 25G series towers that are installed as self-supporting or guyed. As with all ROHN tower accessories, these bracket models are all galvanized. ROHN Tower Adjustable House Brackets are completely adjustable, from 0 in. up to 36 in. offset depending on model, to handle most house wall bracketing installation of 25G tower where there is an overhanging eave to be cleared. These models HB25AG, HB25BG, and HB25CG are intended for use for a guyed or self-supporting ROHN 25G tower installations. Even for 25G towers that are installed with a sufficient base and design to be self-supporting, many municipalities require towers that are mounted next to a house to be bracketed to the house. ROHN Tower Adjustable House Brackets provide sufficient adjustments for virtually every tower house bracketing situation. The Universal Eave Bracket, model EB2525G, offers hinged connections which allow the tower leg clamps to remain perpendicular to the ground while bolt down supports rotate to lay flat along the pitched roof or under the pitched eave. These ROHN Tower Adjustable House Brackets are for self-supporting or guyed installations only and are not intended for bracketed only tower installations. For "Bracketed Tower" installations of ROHN 25G that are only bracketed and which are not self-supporting and will not be guyed, use the ROHN Heavy Duty Universal House Bracket model HBUTVRO.
( 11 )
$159.99
—
$271.99
ROHN Pier Pin Tower Base Plates
ROHN pier pin tower base plates allow you to mount your 45G or 55G-series tower using 3/4 in. x 12 in. pier pins embedded in concrete. ROHN pier pin base plates cannot be used in self-supporting applications--they must be used for bracketed or guyed installations only. Be confident in your tower installation with ROHN concrete base plates.
Not Yet Reviewed
$219.99
—
$379.99
ROHN BA25G Tower Bearing Plates with Accessory Shelf
ROHN BAS25G Tower Bearing Plates with Accessory Shelf (rotator plate) are designed to be complete units with a top and bottom plate and integrated tubular legs. They are manufactured to be compatible with the 25G standard tower sections and are meant to be installed onto the topmost straight section of the tower. Plate-to-plate distance is 16 in. for rotor clearance. The ROHN BAS25G tower bearing plates with accessory shelf are drilled to accept the DXE-TB-300 or ROHN TB-3 thrust bearing on the top plate for use with an extended mast. The accessory shelf comes pre-drilled, making it compatible with many of today's most popular rotor models.
( 4 )
$509.99
ROHN Flat Roof Mounts
ROHN Flat Roof Mounts bolt directly to your flat roof surface to support a guyed ROHN 25G or 45G tower. The flat roof location must be water-tight and reinforced to support tower/antenna weight. These bases require the tower to be guyed or bracketed and cannot be used as a self-supporting base plate. These tower bases use double-bolted attachment joints, which are proven to be the best method of joining tower sections for sturdiness and dependability. The associated tower can be used in guyed or bracketed configurations. Roof mounted tower options may limit potential height considerably by restricted guy line lengths and anchoring options. To mount your ROHN 25G or 45G Series tower to a flat roof, use one of these ROHN Flat Roof Mounts from DX Engineering.
Not Yet Reviewed
$379.99
—
$569.99
ROHN 55G Tower Short Bases
ROHN SB55G Tower Short Bases are designed to be embedded directly into concrete as the base section for a 55G tower installation. They are positioned in the ground and then have concrete poured around them to provide an anchored connection to the 55G main tower sections. The SB55G short bases use double-bolted joints, which are time-proven to be the best method of joining tower sections of this size for sturdiness and dependability. The ROHN SB55G short bases feature the 55G equilateral triangular design, and are constructed of extra heavy-duty steel tubing legs with a continuous solid-steel rod used in ROHN's signature Zig-Zag bracing. For heavy-duty service and solidly anchored towers, turn to DX Engineering for your ROHN SB55G Tower Short Bases!
( 1 )
$297.99
ROHN TBSAFETY Turnbuckle Safety Kits
ROHN TBSAFETY Turnbuckle Safety Kits include 45 ft. (15 ft. per guy anchor assembly) of 1/4 in. high strength guy wire to secure your turnbuckles and 6 matching 1/4 in. forged and galvanized U-bolt clips for final fastening of the safety wire on each of three guy anchors. In other words, use 15 ft. of guy wire and 2 clips on each guy-anchor assembly for protection against turnbuckle loosening or catastrophic failure. Turnbuckles, like all metal exposed to the elements, degrade over time. These safety kits thread through the turnbuckles and guy-line terminations (thimbles and eyes) in figure-8 fashion to make everything secure. Don't allow your tower to collapse due to turnbuckle failure. Order your ROHN TBSAFETY Turnbuckle Safety Kits from DX Engineering and make your tower installation safer!
Not Yet Reviewed
$71.99
ROHN APL55G Tower Top Plates
ROHN APL55G Tower Top Plates are designed to bolt on top of a standard 55G section to provide a small platform for the installation of equipment. They are manufactured from quality, durable materials and have a square, pre-drilled bolt pattern typically used to mount beacon lights or lightning rods. These galvanized plates are the perfect cap for your ROHN tower when you are not using a tapered top, bearing plate, or other topping hardware. Contact DX Engineering for your ROHN APL55G Tower Top Plates!
Not Yet Reviewed
$479.99
ROHN Single Drive-In Base Plates
ROHN Single Drive-In Base Plates are for mounting a bracketed or guyed ROHN 25G tower directly onto tightly compacted soil, intended for short term and temporary installations. They are made of steel and are completely galvanized. As specified by ROHN, 25G towers mounted on Single Drive-In Base Plates MUST be bracketed or guyed at all times. Temporary steel guying may be necessary and is recommended during installation and dismantling.
Not Yet Reviewed
$436.99
ROHN JRM Series Non-Penetrating Roof Mounts
ROHN JRM Series Non-Penetrating Roof Mounts provide the option of installing antennas on flat roofs without physically attaching anything to the roof. No drilling, lag bolts, screws or other penetration of the roof is necessary. JRM Series mounts are galvanized for corrosion resistance and feature an integral mast. These roof mounts are used extensively in cellular, PCS, broadband, two-way radio and other applications. JRM Series roof mounts have 5 or 10 ft. masts, depending on model. They are designed to be ballasted with standard 16 in. concrete blocks (not included) for added stability. These roof mounts ship disassembled and have a square base when set up, with angle-steel frames to hold up to 12 concrete blocks. For added roof protection, ROHN's optional JRMPAD provides a fitted 3/8 in. cushion between your mount and the flat roof. When you need antennas atop your flat roof, but have no convenient way to mount them, these ROHN JRM Series Non-Penetrating Roof Mounts are just the ticket. Order yours from DX Engineering!
( 1 )
$539.99
—
$719.99
ROHN 45G Tower Sections
ROHN 45G Tower Sections are true multi-use tower sections that provide excellent strength for applications up to 300 ft. The 45G tower sections are offered with heavy steel tube legs to satisfy a wide variety of needs under various conditions.
Not Yet Reviewed
$409.99
—
$485.99
ROHN Tower Bearing Plates
ROHN Tower Bearing Plates are designed to bolt on top of a standard section. They are manufactured from quality, durable materials and have pre-drilled bolt patterns to fit either the 2 in. or 3 in. O.D. thrust bearings.
( 1 )
$449.99
—
$519.99
ROHN Turnbuckles
ROHN Turnbuckles are constructed with a steel sleeve surrounding internal steel screws used to pull anchor points closer together by turning the turnbuckle body. They are ideally suited for tensioning mast or tower guy lines. These turnbuckles are galvanized for weather resistance and long life. Working load for these turnbuckles starts at 1,200 lbs. and then goes up. Break strength, also known as ultimate strength, is 6,000 lbs. and up. If you are raising a new mast or tower, or just performing maintenance on your existing installation, these ROHN Turnbuckles from DX Engineering will take the strain, year after year after year!
Not Yet Reviewed
$116.99
ROHN APL25G Tower Top Plates
ROHN APL25G Tower Top Plates are designed to bolt on top of a standard 25G section to provide a small platform for the installation of equipment. They are manufactured from quality, durable materials and have a square, pre-drilled bolt pattern typically used to mount beacon lights or lightning rods. These galvanized plates are the perfect cap for your ROHN tower when you are not using a tapered top, bearing plate, or other topping hardware. Contact DX Engineering for your ROHN APL25G Tower Top Plates!
Not Yet Reviewed
$229.99
ROHN JRM Series Roof Pads
For added protection of your flat roof, ROHN JRM Series Roof Pads rest beneath your ROHN JRM Series roof mounts. These durable rubber pads provide an optional protective layer between the roof's surface and the roof mount. Simply select your location and install them before beginning the roof mount installation. These durable 1/4 in. thick JRMPAD protective mats ship as a set of three smaller pads for ease of handling. They form a fitted cushion when set up, sized specifically for the ROHN JRM Series mounts. If you have any worries that a JRM Series non-penetrating roof mount might tear or gouge your expensive roofing material, then ROHN JRM Series Roof Pads from DX Engineering provide for a worry free installation.
Not Yet Reviewed
$177.99
ROHN RSL Series Tower Step Kits
To aid in the ease of climbing, ROHN RSL Series Tower Step Kits are used to provide sure, flat footing instead of relying on diagonal bracing. Each kit contains 10 steps 5/8 diameter by 7 in. long to mount on one leg of the tower. These step kits are for equipping a single tower section. If desired, each tower section may be fitted with a step kit. Step up to your antenna work with ROHN RSL Series Tower Step Kits from DX Engineering!
Not Yet Reviewed
$99.99
Clearance
ROHN Torque Bars
ROHN Torque Bars are accessory items for Guy Bracket Assemblies, which mount in place of the Guy Bracket rings. These ROHN torque bars provide greater guy line control of tower twisting that may be caused by larger antenna wind loading. ROHN torque bars are recommended for guy bracket assemblies where the aim of beam antennas needs to be maintained by limiting tower twisting.
Not Yet Reviewed
$450.99
$360.79
ROHN RP25G Rotor Posts
These ROHN RP25G Rotor Posts are designed for use with ROHN 25G tower sections and facilitate the mounting of antenna rotors to the tower leg. The rotor post assembly is bolted to the leg of ROHN 25G tower sections with the included hardware, and provides 4.750 in. of clear distance between the tower leg and the rotor post. The standoff arm of the R-RP25G is welded to the bottom of the rotor post. This allows for mounting antenna rotors onto the 1.250 in. post as if it were a mast. When your top section is full, or you just need "another place" to mount your antenna rotor, these ROHN RP25G Rotor Posts are just the ticket!
( 1 )
$99.99
ROHN RASK34 Accessory Shelf Kits
ROHN RASK34 Accessory Shelf Kits attach to ROHN's newly re-designed RSL towers on either section 3 or 4. These mounts connect to top-section tower legs at approximately 4 to 6 in. below the tower top. Each kit includes the plate and attachment hardware. A matching top plate, (RTP34), if required for your application, is sold separately. Accessory shelves are usually a required item for most hams. ROHN RASK34 Accessory Shelf Kits for their RSL towers are now available from DX Engineering.
Not Yet Reviewed
$473.99