Availability
Towers
ROHN 25G Tower Sections
ROHN 25G Tower Sections are the world standard in galvanized steel tower. ROHN towers use double-bolted joints, which have been proven to be the best method of joining tower sections, for sturdiness and dependability. As a guyed structure, the standard 25G designs may rise to a height of 190 ft. ROHN 25G Tower Sections include the standard straight sections that are 10 ft. in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. 25G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. ROHN 25G Tower Sections feature: * Complete hot dip-galvanizing after fabrication * 11 1/4 in. equilateral triangle design * High-strength tubular legs are joined by continuous, solid round steel bracing cross members * Each straight and top section shipped with all required nuts and bolts for mounting that section, supplied inside one of the section legs. ROHN 25G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! Order your ROHN Tower Sections and other tower installation accessories from DX Engineering today!
( 21 )
$199.99
Amerite Tower Sections
American Tower Company Amerite Tower Sections are a quality alternative to those supplied by other tower makers. The American Tower Company has been making towers since 1953. That should let you know that they provide good, competitive products. Amerite 25, American Tower Company's best-selling tower size, is one of the most versatile, economical, and dependable towers for self-supporting, bracketed, and guyed applications. These tower sections feature a 12-1/2 in. face width with 16-gauge 1-1/4 in. diameter steel tubing legs. Amerite 45 and 55 sections are larger, stronger towers for more demanding applications and greater heights. Amerite tower sections include short bases for embedding in concrete, straight sections to build your tower height, and top sections for mast and antenna support. Additionally, Amerite supplies a short base with a built-in tilt mechanism. This tilt base allows shorter Amerite towers to be lowered for antenna system maintenance. Whether your application is Amateur Radio, Wi-Fi, light commercial two-way or even residential TV reception, American Tower Company Amerite Tower Sections, from DX Engineering, are a great choice for raising your antennas.
( 50 )
$189.99
—
$237.99
WiMo GPF-60 Rotator Platforms
WiMo GPF-60 Rotator Platforms are hot-dipped galvanized, sturdy platforms designed for rotators and thrust bearings for rotating masts up to 2.36 in. (60mm) diameter. The fixed mast clamp size range is 1.97 - 2.76 in. (50 to 70mm ) in diameter. The distance from the center of the mast to the end of the platform is approximately 10.83 in. (275mm). The distance from the center of the mast to the center of the mounting position (center of rotor/bearing) is approximately 7.68 in. (195mm). This platform is also designed to accommodate the Yaesu GS-065 Mast Bearing, also available from DX Engineering. Notes: * The Yaesu GS-050 Mast Bearing will NOT fit this mount! * Hy-Gain HAM-IV Rotators have a control cable pigtail on the bottom of the rotator, these rotators must be mounted to the platform using spacers to accommodate the cable. As an alternative, a hole may be drilled into the platform to pass the cable through.
( 2 )
$129.99
DX Engineering Tower Accessory Shelves
DX Engineering Tower Accessory Shelves are custom made by DX Engineering in two sizes and styles to fit different size ROHN and Amerite Towers. Made from 3/16 in. thick, laser-cut "304" Stainless Steel, each DXE Accessory Shelf comes with all stainless steel tower mounting hardware for long-lasting, durable strength. Both accessory shelves have four slotted holes (no drilling required*) to mount the most popular rotators from Yaesu, DX Engineering, M2 Antennas and Hy-Gain, and two additional holes are provided for rotator models with six mounting bolts. Rotator or positioner mounting bolts are not included with these plates; they are provided by the manufacturer with each rotator unit. Two models of DX Engineering Tower Accessory Shelves are available. Click the part details below to see more images of each model: - DXE-AS25G fits ROHN 25G and Amerite 25 towers, with formed integral brackets for v-bolt clamps. This plate is used ONLY for mounting a rotator at the top of a 25 top section or where there are no cross braces on a 25 straight section that would interfere with installation and operation of the rotator. NOTE: ROHN 25G does not accommodate mid-section bearings, so there are no holes for bearings. NO BEARINGS can be mounted on the DXE-AS25G. If you want to use a bearing, use a flat top tower section that accommodates a bearing, or install ROHN 45G or 55G Tower and DXE-AS455G Accessory Shelves. - DXE-AS455G is adjustable to fit ROHN 45G and 55G towers and Amerite -45 and -55 towers. This model accessory shelf mounts all of the rotators listed and features additional holes for mounting DX Engineering Thrust Bearings (DXE-TB300 and DXE TB400). These shelves are mounted with 3/16 in. stainless steel L-brackets and double stainless steel V-bolts at each tower leg. DXE-AS455G may be used anywhere in any 45 or 55 section for a rotator or as a bearing shelf, including as a Top Bearing Plate. As with all stainless steel hardware, a good quality anti-seize lubricant, such as Jet-Lube SS-30 (part number JTL-12555) should be used to avoid galling. When installing, mount the shelf level in the tower. Tighten all bolts evenly. *NOTE: Larger holes are only needed when mounting the OR2800 series M2 Antennas rotator. No holes are provided for Hy-Gain HDR-300 series rotators.) DXE-AS-25G Stainless Steel Parts List: 1 - Tower Shelf, laser drilled with integral L-Brackets 3 - V-Bolts, 1.50 in. x 1/4-20 3 - Hardware packages for V-Bolts (Flat Washer, Split Washer and Hex Nut) DXE-AS455G Stainless Steel Parts List: 1 - Tower Plate, 3/16 in., laser drilled 3 - Tower Plate Mounting L-Bracket, laser drilled 6 - V-Bolts, 1.00 - 2.00 in. x 5/16 in. 6 - Hex Head Bolts, 1.00 in. x 5/16 -18 9 - Hardware packs, 5/16 -18 (Flat Washer, Split Washer, Hex Nut)
( 51 )
$109.99
—
$165.99
ROHN Tripod Roof Towers
ROHN tripod roof towers or TRTs feature a universal mast clamp that is capable of mounting masts with up to 1 3/4 in. diameters and swivel feet that adjust to the pitch of almost any roof. Installation is simple and fast with lag screws or bolts (not included) through the feet that securely anchor the towers for long, trouble-free service. ROHN tripod roof towers feature a lower mast support bracket and hot-dip galvanized construction for corrosion protection.
( 25 )
$129.99
—
$159.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$103.99
—
$107.99
Amerite Tower Base Plates
American Tower Company Amerite Tower Base Plates allow you to mount your AME-25, 45 or 55 series tower using several different methods. Amerite base plates cannot be used in self-supporting applications… they must be used for bracketed or guyed installations only. Amerite drive-in base plates are for mounting a bracketed or guyed tower directly onto tightly compacted soil; intended for short term and temporary installations. They are made of steel and are completely galvanized. Towers mounted on drive-in base plates MUST be bracketed or guyed at all times. They are designed to prevent the bottom of a temporary tower from "kicking out" and causing tower collapse. They are great for Field Day and other interim applications. Amerite hinged tower base plates allow you to mount your Amerite 25G-series tower using six 1/2 in. x 12 in. base bolts embedded in the concrete pier. Amerite hinged base plates enable the tower to be rotated up from the base during installation. Hinged tower base plates must be used in bracketed or guyed tower applications only. Be confident in your tower installation with Amerite tower base plates. Whether for roof or ground mounting, permanent-hinged or temporary use, these American Tower Company Amerite Tower Base Plates from DX Engineering help to raise your tower!
( 23 )
$119.99
—
$219.99
ROHN BPC25G Concrete Base Plates
These ROHN BPC25G Concrete Base Plates provide an easy and secure way to mount your guyed or bracketed ROHN 25G tower to a concrete pier, without the need for embedding a tower section in concrete. With these base plates, only a single 3/4 x 12 in. Pier Pin embedded in the standard concrete base is required to anchor the base of a ROHN 25G Series guyed tower. This is possible since lateral forces are minimized at the base of the tower. A slight pivoting of the pier pin anchored tower base is natural and allowable, as virtually all of the guyed tower forces are exerted vertically onto the concrete pier. BPC25G Concrete Base Plates are completely hot-dip galvanized after fabrication and are designed to work only with Rohn 25G Series straight tower sections. Setting the standard in towers for decades, Rohn has supported more ham antennas than any other brand. Start your tower build with one of these BPC25G Concrete Base Plates from DX Engineering!
( 6 )
$129.99
ROHN Pier Pin Tower Base Plates
ROHN pier pin tower base plates allow you to mount your 45G or 55G-series tower using 3/4 in. x 12 in. pier pins embedded in concrete. ROHN pier pin base plates cannot be used in self-supporting applications--they must be used for bracketed or guyed installations only. Be confident in your tower installation with ROHN concrete base plates.
Not Yet Reviewed
$219.99
American Tower Guy Bracket Assemblies
Keep your tower straight with one of these American Tower Guy Bracket Assemblies. Guy bracket assemblies are used to properly attach guy lines and to distribute the forces correctly. They prevent the placement of excessive guying forces onto individual tower legs. Multiple guy brackets are needed at different levels on taller towers. These bracket assemblies are sized to fit correctly around all three of the tower legs for the proper attachment of guy wires in each Amerite tower series. American Tower Guy Bracket Assemblies are built from quality steel and are hot-dip galvanized for long life and install in minutes. Call DX Engineering to order your American Tower Guy Bracket Assemblies today!
( 2 )
$205.99
ROHN 25G Tower Short Bases
ROHN 25G Tower Short Bases are designed to be embedded directly in concrete as the base section for a tower installation. They are set into a hole, and then concrete is poured around them. These ROHN 25G Tower Short Bases feature an 11.250 in. on center equilateral triangular design, and are constructed of extra heavy duty 1.25 in. OD steel tubing side rails with continuous solid steel rod bracing.
( 9 )
$181.99
ROHN Tower Adjustable House Brackets
ROHN Tower Adjustable House Brackets include the standard duty models for wall and eave bracing of 25G series towers that are installed as self-supporting or guyed. As with all ROHN tower accessories, these bracket models are all galvanized. ROHN Tower Adjustable House Brackets are completely adjustable, from 0 in. up to 36 in. offset depending on model, to handle most house wall bracketing installation of 25G tower where there is an overhanging eave to be cleared. These models HB25AG, HB25BG, and HB25CG are intended for use for a guyed or self-supporting ROHN 25G tower installations. Even for 25G towers that are installed with a sufficient base and design to be self-supporting, many municipalities require towers that are mounted next to a house to be bracketed to the house. ROHN Tower Adjustable House Brackets provide sufficient adjustments for virtually every tower house bracketing situation. The Universal Eave Bracket, model EB2525G, offers hinged connections which allow the tower leg clamps to remain perpendicular to the ground while bolt down supports rotate to lay flat along the pitched roof or under the pitched eave. These ROHN Tower Adjustable House Brackets are for self-supporting or guyed installations only and are not intended for bracketed only tower installations. For "Bracketed Tower" installations of ROHN 25G that are only bracketed and which are not self-supporting and will not be guyed, use the ROHN Heavy Duty Universal House Bracket model HBUTVRO.
( 11 )
$159.99
—
$249.99
ROHN 45G Tower Short Bases
ROHN 45G tower short bases are designed to be embedded directly in the concrete as the base section for a 45G tower installation. They are set into a hole and then have concrete poured around them to provide a bolted connection to the 45G main tower section. The 45G tower short bases uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability. The ROHN 45G tower short bases feature a 16.750 in. equilateral triangular design, and are constructed of extra heavy duty 1 ¼ in. steel tubing side rails with continuous solid steel rod bracing.
Not Yet Reviewed
$193.99
Carlson Mid-Level Guy Line Assemblies
Carlson Mid-Level Guy Line Assemblies are engineered specifically for use with the Carlson Tower Lift on Rohn 25G series towers. This kit includes three mid-level guy line assemblies, each consisting of a 60-foot guy line pre-attached to a durable rung bracket. Together, these assemblies allow you to effectively organize and control guy lines so they do not interfere with the lift's movement as it travels up and down the tower. Designed for both new installations and retrofits, these patent-pending assemblies integrate seamlessly with the lift system. When upgrading an existing standing tower with mid-level guy lines, simply replace the original lines with these specially designed assemblies to maintain proper function of the tower lift. The complete Mid-Level Guy Line Assemblies kit ships in a compact 12x12x6in. box and weighs 16lbs.
Not Yet Reviewed
$199.00
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$201.99
—
$239.99
Yaesu Rotator Mast Bearings
Yaesu Rotator Mast Bearings are used to secure rotating mast that is used for directional antennas. These are also known as thrust bearings, because they maintain smooth and steady rotation even when a large lateral thrust of the wind is pushing on the antenna and the mast. These Yaesu bearings stabilize and secure your antenna mast.
( 16 )
$159.95
ROHN Tower Work Platforms
ROHN Tower Work Platforms are essential for working long periods on the tower. They simply snap into place on ROHN G Series Towers. They are easily positioned and repositioned at any level, since no mounting bolts are required. Save your feet and legs from the pain of standing on the skinny cross bracing. ROHN Work Platforms (ROH-WP25G / WP45G / WP55G ) have been designed to meet the TIA 250 lbs. load requirement. This includes the weight of the safety equipment harness, lanyard and tools on your tool belt. Anything over that would require a review by a local engineer. Get your ROHN Tower Work Platforms from DX Engineering today!
( 9 )
$249.99
DX Engineering Bent Pin Shackles
DX Engineering Bent Pin Shackles are used for guy line attachment to towers for Amateur Radio and commercial applications. Also known as a clevis in the power industry, these shackles are specially designed with a removable bent bolt and locking nut to go through the outer hole of the matching guy strain insulators commonly known as the "502" or the "504" in ham radio tower work. Forged from 1/2 in. steel and hot dip galvanized, these Bent Pin Shackles have a minimum ultimate strength of over 12,000 lbs. and have a rounded end large enough to be used around a tower leg. However, they are typically connected to a guy attachment tower ear or guy bracket, with a screw pin shackle used as a link. The insulators that fit inside of this shackle accept the guy line big grips from either metal or non-metallic guy lines. For those who already have insulators, Bent Pin Shackles are offered in a set of three for each level of guying. We sell the matching DXE-502 and DXE-504 insulators in sets of three. Also available are two kits that include three Insulators of either size and three Bent Pin Shackles. Look to DX Engineering for the unique tower hardware that you need.
Not Yet Reviewed
$231.99
DX Engineering Tapered Tower Thrust Bearing Shelf
DX Engineering Tapered Tower Thrust Bearing Shelf DXE-TBS25G is custom made for ROHN and American Towers 25 series Tapered top sections allowing you to install the DX Engineering Thrust Bearing model DXE-TB300, specifically intended for a 2 in. OD rotating mast. Made from 3/16" thick, laser cut 304 Stainless Steel, this Thrust Bearing Shelf comes with three DX Engineering stainless steel mounting V-bolts and hardware, for durability and strength. As with all stainless-steel hardware, a good quality anti-seize lubricant such as Jet-Lube SS-30 (part number JTL-12555) must be used to avoid galling. The DXE-TBS25G shelf fits the following Top Tapered Tower sections: American Tower: TOW-AME25-TRB TOW-AME25-T TOW-AME25-EMT ROHN: ROH-25AG2 ROH-25AG3
Not Yet Reviewed
$109.99
ROHN Telescopic Mast Roof Mounts
ROHN Telescopic Mast Roof Mounts are completely assembled for a quick and easy flat or peaked roof-mount installation. These mounts are sized for antenna masts up to 2.25 inches in diameter. These mounts allow tall masts to be swung up or down along the ridge of the roof. The bottom of the mast inserts into the hinged base and is secured by set screws. This feature permits the user quick and safe access antennas for servicing or replacement. When combined with a guy-wire system or other stabilizing attachments, these ROHN Telescopic Mast Roof Mounts supply the base-support and convenience that your antenna installation needs. Use them to secure the bottom of your mast to decks, flat roofs, peaked roofs, concrete pads, or just about anything! Fixed or telescopic masts are an inexpensive solution to raising antennas! These ROHN Telescopic Mast Roof Mounts, from DX Engineering, are the perfect answer for mast-base support!
( 1 )
$155.99
Amerite Adjustable Wall Mounts
Amerite Adjustable Wall Mounts are brackets designed to add stability by attaching your tower to a wall well above its base. Care must be given to make sure the wall can support an elevated, bracketed installation. Need to attach your upper tower sections to a wall? Order Amerite Adjustable Wall Brackets from DX Engineering.
Not Yet Reviewed
$135.99
American Tower Amerite-25 Accessory Shelves
American Tower Amerite-25 Accessory Shelves are designed to mount inside Amerite 25 top sections. They are pre-drilled to allow easy mounting of most plate-mounted rotors. For application of non-standard tower accessories, they are easily drilled to allow modification. These accessory shelves are manufactured from the highest-quality materials for maximum reliability and are hot-dip galvanized for long life. When ordering Amerite 25 top sections, don't forget to order your American Tower Amerite-25 Accessory Shelves, now available from DX Engineering.
( 6 )
$110.99
Amerite Tower Short Bases
Amerite Tower Short Bases are designed to be embedded directly in concrete as the base for a tower installation. They are set into the tower foundation hole in the ground with gravel for tower leg drainage and then concrete is poured around the short base. The bottoms of short base legs are not drilled for this reason and cannot be used and mid-tower sections. Amerite Tower Short Bases feature the standard triangular design of extra heavy-duty hot-dip galvanized steel tubing and continuous solid rod braces for maximum strength. These short bases are compatible with their respective 25, 45 and 55 series towers of both brands. For applications including Amateur Radio, Wi-Fi, commercial two-way or even residential TV reception, American Tower Company Amerite Towers and Short Bases from DX Engineering are a great choice for raising your antennas.
( 2 )
$135.99
—
$183.99
DX Engineering Bearing Bypass Ground Kits
DX Engineering Bearing Bypass Grounding Kits are designed to provide a low-resistance parallel path for lightning; protecting your valuable thrust and rotator bearings. Never mind the equipment replacement cost, one of these could save you a tower climb! These kits attach to your mast, bypass your thrust bearing, and then connect directly to your tower leg. Their 1AWG copper cable shunts high currents around the thrust bearing, preventing damage to bearings and races. By carrying heavy currents directly to the tower leg, you will also protect your rotator motor bearings at the bottom of the mast- another big expense. These kits come complete with clamps, bolts, and cable with ring lugs already installed. Protect the important mechanical and electrical items atop your tower! Order your own DX Engineering Bearing Bypass Grounding Kits… shop now!
Not Yet Reviewed
$211.93
—
$229.43