Availability
Towers
ROHN Hinged Tower Base Plates
ROHN Hinged Tower Base Plates allow you to mount your ROHN tower using six base bolts embedded in the concrete pier. ROHN hinged base plates enable the tower to be rotated up from the base during installation. Hinged tower base plates must be used with bracketed or guyed tower applications only.
( 8 )
$1,349.99
Carlson Roof Mounted Antenna Tower
Carlson Roof Mounted Antenna Towers offer a practical solution for Amateur Radio enthusiasts facing restrictions from homeowners' association (HOA) or limited lot space. Their versatility in supporting various types of antennas, including fixed, single-axis, or twin-axis rotators, makes them a valuable option for optimizing frequency coverage in your shack. The range of antennas compatible with Carlson Communications Roof Mounted Towers is diverse, catering to the different needs and preferences within the Amateur Radio community. Popular antenna options like Hex Beams, Low Earth Orbit (LEO) satellite, as well as other popular antennas are well-suited for installation on roof towers, enhancing communication capabilities for operators despite space constraints or regulatory limitations.
( 6 )
$1,161.98
Carlson Model 25 Tower Lifts
Carlson Model 25 Tower Lifts are designed for use with Rohn® 25G and Amerite® 25 towers and is a precision-engineered mechanical elevator system that eliminates the need to repeatedly climb sectional lattice towers to perform needed servicing. The initial release, Model 25, works on ROHN® 25G and Amerite® 25 towers up to 60-feet tall. The Carlson Tower Lift can be installed together with new tower installations and retrofitted onto existing towers. The Lift secures the tower-top equipment – antenna(s), mast, rotator, thrust bearing – into a sturdy Carriage that is mechanically raised and lowered on the tower from ground level with an integrated winch-and-pulley system. The Lift enables the antenna and equipment to be lowered to a comfortable working height to safely and easily perform basic antenna equipment service, maintenance and replacement. The Lift then raises the Carriage and equipment back to the top of the tower.
Not Yet Reviewed
$1,499.00
ROHN 45GSR Tower Sections
ROHN 45GSR Tower Sections are extreme-duty tower sections that provide excellent strength for guyed applications up to 340 ft. 45GSR tower sections are manufactured with heavy solid-rod steel legs to satisfy a wide variety of needs under punishing conditions. These tower sections are galvanized after fabrication to assure complete corrosion resistance. Where durability and longevity are paramount, these 45GSR tower sections, with their solid-rod legs, offer the strongest and most rigid construction in their class. Order your own ROHN 45GSR Tower Sections from DX Engineering!
Not Yet Reviewed
$1,374.99
ROHN G-Series Self-Supporting Towers
ROHN G-Series Self-Supporting Towers offer an easy, low-cost solution to getting lightweight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you will minimize land-area usage. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger-series model provides greater wind loading capacity. Features of G-Series and GSR-Series Tower Kits include: * Completely hot-dip galvanized after fabrication * Cross bracing is formed by continuous solid-rod bracing fashioned into a zigzag pattern for strength * Pre-engineered loading charts meet varying individual specs and site conditions * Typical uses include: small dishes, broadband, security, and two-way radio * All towers have "fixed" bases (non-tilt) * ROHN GSR-Series towers feature Solid-Rod legs for extra strength ROHN Self-Supporting 25G, 45G, 55G and 45GSR-Series Tower Packages include: * One short-base section for embedment in concrete foundation * All Tower Sections and section joining hardware * One tapered top section with 25G, 45G and 55G packages (no top included for 45GSR towers) NOTE: Accessory Plates and Grounding Kits are sold separately ROHN Towers is famous around the world for providing quality, well-engineered tower products. You can feel confident when you order your ROHN G-Series Self-Supporting Towers from DX Engineering!
Not Yet Reviewed
$1,129.99
ROHN BRM4 Series Non-Penetrating Roof Mounts
ROHN BRM4 Series Non-Penetrating Roof Mounts provide the option of installing antennas on flat roofs without attaching to the roof. No drilling, lag bolts, screws or other penetration of the roof is necessary. BRM Series mounts are galvanized for corrosion resistance and feature an integral mast. These roof mounts are used in cellular, PCS, broadband, two-way radio and other applications. BRM4 Series roof mounts have 3 or 10 ft. masts, depending on model. They are designed to be ballasted with standard 16 in. concrete blocks (not included) for added stability. These clever mounts ship disassembled and have a square base when set up, with angle-steel frames to hold the blocks. For added roof protection, ROHN's optional BRM4MAT provides a fitted 1/8 in. cushion between your mount and the flat roof. When you need antennas, but have no convenient way to mount them, these ROHN BRM4 Series Non-Penetrating Roof Mounts are just the ticket. Order yours from DX Engineering and get those antennas up!
Not Yet Reviewed
$1,019.99
ROHN RAL Series Tower Base Anchors
ROHN RAL Series Tower Base Anchors are designed specifically for RSL towers. Choose the proper product number based upon the bottom tower section. For example, RAL10 is the correct part when an RSL10 is the bottom tower section. RAL Series bases include a foundation template to insure the base is set in the proper place when embedding in concrete. These bases employ a double-nut system that is used for limited tower leveling after the foundation is poured. When you install an RSL tower, remember to order your ROHN RAL Series Tower Base Anchors from DX Engineering as well.
Not Yet Reviewed
$1,349.99
—
$1,359.99
ROHN H2545 Erection Fixture Heads
ROHN Products H2545 Erection Fixture Heads provide a solid anchor point for the pole portion of the "gin pole," also known as a tower erection fixture. These high-quality steel products are the key to safely erecting or servicing ROHN 25G and 45G towers. ROHN has been the trusted name of providing quality engineered utility structures since 1948. These parts are tough and it's hard to imagine damaging one of them. However, if your fixture head has been misplaced, stolen, or damaged, then this is the replacement you need. You may also consider using this well-designed part as the basis for a custom fixture of your own. They accept 2.0 in. outside diameter steel poles and are designed to fit ROHN 25G and 45G tower legs. Whether you are looking for a new or replacement part, ROHN Products H2545 Erection Fixture Heads, now available from DX Engineering, will help you get your tower work completed!
Not Yet Reviewed
$1,039.99
TBX Tower Sections
DX Engineering is pleased to offer TBX Tower Sections as an alternative choice for hams that want to assemble their own free-standing tower. Although there are only eleven discrete sections in the TBX stable, these sections may be assembled into Standard, Heavy-Duty, and Extra Heavy-Duty towers of varying height. TBX Tower Sections are lattice-style offset-mounting sections; each 8 ft. section offsets at the top to accept the next, smaller section. This method yields a tower that "steps down" in size the higher they go, but does so with sections that are essentially straight. Made of heavy-gauge contoured steel with riveted "X" bracing, these tower sections are also pre-galvanized for weather resistance and long life. Each section is supplied pre-assembled and arrives with the required hardware for an easy installation. To choose sections for your tower needs, start with a TBX1A top section for standard strength, a TBX2A top section for Heavy-Duty strength, or a TBX3A top section for Extra Heavy-Duty strength, and then add subsequently numbered sections to reach your desired height. For example, a TBX1A plus a TBX2 plus a TBX3 equals a 24 ft. TBX tower! Simply choose your base mount, fixed or hinged, and assemble. TBX top sections include a rotor plate and top plate, too! More and more hams are going to freestanding towers. Whether you acquired an old TBX tower needing a replacement section or are assembling a new tower, these TBX Tower Sections, now available from DX Engineering, may offer you exactly what you've been looking for!
( 2 )
$1,107.00
—
$1,283.00
Universal Towers Packaged Tower Kits
Universal Towers Packaged Tower Kits are engineered antenna support systems using predetermined straight and tapered 10 ft. sections for a self-supporting tower with a safe maximum antenna wind load rating at a specified height. Tapered towers minimize space and weight while maintaining high strength and high wind load ratings in a completely free standing structure that is durable and reliable. Universal Towers feature rugged, heavy-wall aluminum tubing legs and welded S-bracing made of high-quality aluminum for excellent strength as well as light weight. Each welded truss section is fully assembled, finished and supplied with the required hardware for easy installation. These free standing towers can raise large antennas into the open air easily with a concrete anchored hinged base. Universal Towers Packaged Tower Kits provide self-supporting radio antenna towers that actually fit and work where guyed towers cannot. Universal Tower packages are selected by wind load rating to a desired height. Very simply specified, the first number of the model number is the wind load rating* and the second number is the tower height. There will be no doubt that your unique combination of antennas and mast (plus rotator), with a known combined wind load, will stay safely in the air where they belong. Choose your engineered tower package from wind load ratings ranging from 3 to 35 sq. ft. covering heights ranging from 30 to 100 ft., with nearly 50 models to suit almost any location or antenna support requirement. Choose a Standard Duty or Heavy Duty Universal Tower Package to ensure the best reliability for your antenna system. Each Standard Duty package requires a Tower Base, B-14, B-18, B-22 or B-26 to match the bottom section leg spacing in inches. All Heavy Duty tower packages model number start with "HD" and use a B-30 Base for Universal's largest 30 inch bottom section. All bases have three high capacity 6 inch hinge sleeves securely bolted onto three 48 in. steel stubs with which to anchor the tower into the customer supplied reinforced concrete tower foundation; size depends on tower model. Add the appropriate Base to your package to determine tower cost. Please note, additional truck freight costs quoted by Universal are reported by DX Engineering sales. Universal Towers are special ordered by calling DX Engineering to determine options. Packages typically include a mast collar for a 2 in. OD mast with a welded bearing mount top plate specially drilled for the DX Engineering Advanced Design TB-300 thrust bearing, sold separately. Packages with other mast collar sizes and without bearing top plate are available by request. A variety of optional Rotator Plates are also available. Chose yours to fit the top section of the tower package selected; R-11, R-14 or R-18. Each is available undrilled or predrilled for popular rotator models, "-H" for Hy-Gain/CDE or "-Y" for Yaesu. Universal Towers Aluminum Masts in various lengths and sizes are available as well. For more information on Universal Towers Standard Duty and Heavy-Duty Packaged Tower Kits and tower hardware, click on the applicable "Documentation" link. Call DX Engineering for assistance and to place your special Universal Tower order. For Amateur Radio Operators, communications systems professionals, and wireless systems operators and users, Universal Towers Packaged Tower Kits from DX Engineering are excellent antenna support solutions for better communications! *Wind load ratings are to 80 MPH which serves the majority of the USA and antenna models. Specific open plains and coastal areas with occasional peak winds of 100 MPH or 110 MPH are locations where these tower packages are rated for lower antenna wind loads. See these ratings on the individual drawings of each of the Universal Towers Package Tower Kit models, linked in the "Documentation" section.
( 4 )
$1,072.55
—
$1,449.70