Availability
Towers
Yaesu Rotator Mast Bearings
Yaesu Rotator Mast Bearings are used to secure rotating mast that is used for directional antennas. These are also known as thrust bearings, because they maintain smooth and steady rotation even when a large lateral thrust of the wind is pushing on the antenna and the mast. These Yaesu bearings stabilize and secure your antenna mast.
( 16 )
$84.99
DX Engineering Lightning Rod Mast Mounts
The use of DX Engineering Lightning Rod Mast Mounts could protect your tower, antennas and station equipment from disastrous lightning damage. DX Engineering Lightning Rod Mast Mounts are 1/8 in. heavy-duty stainless steel clamps that will long outlast your steel tower. Their optional bolts (choose DXE-LRMM-FAST by combined mast and lightning rod diameters) are also high-quality stainless steel. Together, they are extremely durable clamps to keep your lightning rod in place. Lightning searches out the path of least resistance to ground. If that path is your tower, rotator and rotor bearings, antennas and coax, or the ground and electrical connections to your rigs, then that's where it will go. Providing a better path (one with very little resistance) is the key to keeping lightning outside the shack and limiting damage. When used with proper tower grounding, a heavy rotor-bearing bypass cable and installed coaxial surge protectors, a lightning rod above your antennas may save the day. Don't ignore proper grounding and lightning protection! Make a list of all the items you need to upgrade your station's lightning defense. Make sure a mast mounted lightning rod and DX Engineering Lightning Rod Mast Mounts are added to your list.
Not Yet Reviewed
$75.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$53.99
—
$99.99
DX Engineering Mastlock Tower Accessory
The DX Engineering Mastlock Tower Accessory is very helpful tool for use on ROHN and Amerite Towers in the 25, 45 and 55 series. Using this hardware combination of DX Engineering V-Bolts and our specially drilled aluminum plate, you'll be able to lock your 2 to 3 in. tower mast into position. This tool keeps the mast slipping downward, allowing rotator removal for service, and it prevents the mast from turning during tower or antenna maintenance. The purchase and use of two DXE-MASTLOCK assemblies is suggested for locking a top-heavy mast into the center of the tower. This is especially helpful for heavily loaded masts that have most of their length above the top of the tower. Without much mast below the top, there is a lot of torque and side force trying to push the mast askew. Two of the DXE-MASTLOCK will keep that mast right in place while work is done on the mast or rotator. This accessory will work on mast tube, as well as flat top towers with thrust bearings—and can prevent accidental damage to the tower and accessories during maintenance. The DXE-MASTLOCK plate is made from 0.250 in. thick 6061-T6 aluminum. It comes with the proven high-quality DX Engineering V-saddle clamps, sized for 2 to 3 in. masts and tower legs from 1.250 to 1.500 in.. NOTE: As with all stainless steel hardware, a good quality anti-seize, such as Jet-Lube SS-30 (part number JTL-12555), must be used to avoid galling. When installing the DXE-MASTLOCK, be sure to tighten all bolts evenly.
( 5 )
$69.99
Tower Guy Line Galvanized Turnbuckles
Tower Guy Line Galvanized Turnbuckles provide tension adjustments for metallic or non-metallic guy line tower support systems. These are hot-dip galvanized heavy-duty cast metal turnbuckles that have threaded casings with "E&J" Eye and Jaw or "J&J" Jaw and Jaw screw bolts at opposite ends. They are available in various sizes to provide the correct turnbuckle load capacity which is selected to exceed each guy line load rating required for the tower. With the exception of concrete and rebar, virtually every item that is required for your tower project is available from DX Engineering.
( 1 )
$65.99
—
$67.99
ROHN RP25G Rotor Posts
These ROHN RP25G Rotor Posts are designed for use with ROHN 25G tower sections and facilitate the mounting of antenna rotors to the tower leg. The rotor post assembly is bolted to the leg of ROHN 25G tower sections with the included hardware, and provides 4.750 in. of clear distance between the tower leg and the rotor post. The standoff arm of the R-RP25G is welded to the bottom of the rotor post. This allows for mounting antenna rotors onto the 1.250 in. post as if it were a mast. When your top section is full, or you just need "another place" to mount your antenna rotor, these ROHN RP25G Rotor Posts are just the ticket!
( 1 )
$99.99
DX Engineering Bearing Bypass Cables
DX Engineering Bearing Bypass Cables are heavy-duty cables intended for use with DX Engineering Bearing Bypass Grounding Kits. These cables are exactly the same quality as supplied with our Bearing Bypass kits. They have hundreds of thin copper strands (like welding cable) that ensure maximum flexibility. Our Bearing Bypass cables are size 1 AWG copper. The jacket material is Ethylene-Propylene-Rubber (EPR) insulation; which is both physically tough and UV resistant. Cable length is 10 feet and are supplied with 1/4 and 3/8 in. ring lugs attached. Whether you are replacing your original cable or using one in another application, these DX Engineering Bearing Bypass Cables are delivered ready to go!
Not Yet Reviewed
$95.99
ROHN TBSAFETY Turnbuckle Safety Kits
ROHN TBSAFETY Turnbuckle Safety Kits include 45 ft. (15 ft. per guy anchor assembly) of 1/4 in. high strength guy wire to secure your turnbuckles and 6 matching 1/4 in. forged and galvanized U-bolt clips for final fastening of the safety wire on each of three guy anchors. In other words, use 15 ft. of guy wire and 2 clips on each guy-anchor assembly for protection against turnbuckle loosening or catastrophic failure. Turnbuckles, like all metal exposed to the elements, degrade over time. These safety kits thread through the turnbuckles and guy-line terminations (thimbles and eyes) in figure-8 fashion to make everything secure. Don't allow your tower to collapse due to turnbuckle failure. Order your ROHN TBSAFETY Turnbuckle Safety Kits from DX Engineering and make your tower installation safer!
Not Yet Reviewed
$71.99
ROHN RSL Series Tower Step Kits
To aid in the ease of climbing, ROHN RSL Series Tower Step Kits are used to provide sure, flat footing instead of relying on diagonal bracing. Each kit contains 10 steps 5/8 diameter by 7 in. long to mount on one leg of the tower. These step kits are for equipping a single tower section. If desired, each tower section may be fitted with a step kit. Step up to your antenna work with ROHN RSL Series Tower Step Kits from DX Engineering!
Not Yet Reviewed
$99.99
DX Engineering Phillystran Steel Tail Kits
DX Engineering Phillystran Steel Tail Kits provide the appropriate transition from non-metallic to metallic guying cable at the ground end of tower guying systems. Steel Tail Kits are available for Phillystran HPTG-4000I, -6700I and 11200I Guy Lines. What is the function of the steel tail? Here is the recommendation by Phillystran, the manufacturer of HPTG-I High Performance Tower Guy non-metallic guy lines: A steel tail is a length of EHS (Extra High Strength) steel guy line connecting the HPTG-I assemblies to the turnbuckle or guy anchor. The steel tail protects the HPTG-I assemblies from damage due to brush fires, lawn maintenance equipment or vandals. The steel tail length should be sufficient to get the bottom end of the HPTG-I assembly above arm's reach, or above brush tops (if located in a marsh or tall brush area). The HPTG-I should never pass through tree limbs or be allowed to rub against poles or trees. The steel tail allows for easier guy length calculations and serves as a guy tension monitoring point, as well as a safer area to attach guy grips during guy line installation and tensioning. Eliminating the hassle of buying a length of steel cable and obtaining a special tool to cut it, DX Engineering Phillystran Steel Tail Kits provide everything needed to isolate your tower's non-metallic guy cable from harm. Three different size kits are available for different tower guying requirements provided by Phillystran guy cables 4000I, 6700I and 11200I. Here are the items included in these innovative Steel Tail kits: - 12 ft. EHS steel guy line, Galvanized, in three kit sizes, 3/16 in., 1/4 in. or 5/16 in. - Porcelain Guy Line Strain Insulator, 502 or 504 depending upon kit size - Galvanized Steel Preform Dead End Big-Grips for EHS steel guy line, two per line - Heavy Duty Thimble, galvanized steel, appropriately sized for each kit - Cable Ties, UV protected Black, four, to secure installed Big-Grip ends Note: Phillystran guy line and Preform Dead End Big-Grips for Phillystran are not provided in this kit and must be ordered separately. DX Engineering Phillystran Steel Tail Kits provide Porcelain Guy Line Strain Insulators for the top end of the Steel Tail so that the galvanized steel Big-Grips for the Phillystran and for the EHS Steel Guy Lines do not touching and make RF noise. For three different size Phillystran guy line, HPTG-4000I, -6700I and -11200I, these kits are available exclusively from DX Engineering in 3-packs for each level of tower guying.
( 2 )
$79.99
—
$88.99
Preformed Line Products Big Grip Dead Ends
Preformed Line Products Big Grip galvanized Dead Ends are available in multiple sizes to facilitate the guy line installation of your tower. Using genuine Preformed Line Products Dead Ends will give you an added sense of security, knowing that the investment you've made in your tower is stable and safe.
( 5 )
$65.99
TBX Tower Top Plates
TBX Tower Top Plates work in conjunction with the rotor plate to support lateral forces on the antenna mast. Each top plate has provision for a thrust tube to function as a bearing and allow the mast to turn freely. These top plates are supplied as replacements for the plates supplied with your tower kit or top section. Select your top plate by matching the plate number with the section number. For example, use a TP2 top plate with a TBX2A top section. NOTE: Only the TP3, which only fit on the THDBX series Extra Heavy-Duty Tower Packages, and the TBX3 section, is large enough for a DX Engineering Thrust Bearing, model DXE-TB-300, or ROHN Thrust Bearing model TB-3. A top plate seldom needs to be replaced. If yours does, then DX Engineering is the place to get your TBX Tower Top Plates!
( 1 )
$51.43
—
$76.00
TBX Tower Mast Hardware Kits
TBX Tower Mast Hardware Kits provide mounting options for masts of 1.250 in. diameters. These high-quality mast hardware kits are made of weather-resistant materials for durability and long life. The MK2 clamp assembly is normally used with section 1 as the top section. The TC heavy-duty mast clamp flange is normally used with section 2 or 3 as the top section. Holes are provided on all top plates and rotor plates, however, to accommodate either one. If you need to replace lost, stolen, or damaged mast hardware, or perhaps to do an upgrade, then one of these TBX Tower Mast Hardware Kits, now available from DX Engineering, will get your project back off the ground!
Not Yet Reviewed
$75.00
—
$94.50
TBX Tower Rotor Plates
TBX Tower Rotor Plates are shelves designed to mount inside of the tower's top section. They're available to fit the TBX, THBX, and THDBX series towers. The TBX Rotor Plates have elongated holes that accommodate most CDE, Hy-Gain and Yaesu rotator models. Note: TBX Rotor Plates are not drilled for the mounting of thrust bearings. They're drilled to accommodate mounting stationary mast brackets and clamps. Whether you're using the RP1 for the standard tower or the RP2 or RP3 for the heavier towers, the high quality of the heavy-gauge, zinc-plated rotor plate is the same. When you need another rotor plate for your TBX tower, just contact DX Engineering for TBX Tower Rotor Plates!
( 1 )
$98.73
—
$98.75
Universal Towers Tower Masts
Universal Towers Tower Masts give you the options you need to finish your antenna installation. Manufactured from high-grade materials to exacting standards for seamless installation, these tower masts are available in several diameters and lengths for any project. Order your Universal Towers Tower Mast from DX Engineering today!
Not Yet Reviewed
$66.50
—
$99.75
Universal Towers Rotor Mounts
Universal Towers Rotor Mounts are the perfect solution to combine your specific antenna rotor to your Universal Tower antenna tower. Designed for specific tower top sections and rotors, choose the correct model for your application. Top off your Universal Towers antenna tower with Universal Towers Rotor Mounts from DX Engineering!
Not Yet Reviewed
$57.00
—
$93.10
ROHN Tower Base Pier Pins
ROHN Tower Base Pier Pins are galvanized steel rods used for base plates and tower sections that employ concrete pier-pin equipped support piers. Required for concrete base plates and tapered pier-pin tower sections, they are embedded deeply into the center of the tower's concrete base pier. These pier-pins are used in bracketed or guyed tower applications only.
( 2 )
$51.99
Universal Towers Roof Mounts
Universal Towers Roof Mounts allow you to mount a small tower on a flat roof. These hinged mounts are available to fit 11 in. to 30 in. sections. Towers mounted with these bases require guying. Order yours from DX Engineering today!
Not Yet Reviewed
$83.60
—
$93.10