Towers
Availability
HAM Radio Antenna Towers
At the heart of every successful radio installation is the antenna support structure, because there is no substitute for a radio antenna that has sufficient height!...
At the heart of every successful radio installation is the antenna support structure, because there is no substitute for a radio antenna that has sufficient height! That is why DX Engineering offers easy shopping of an extensive selection of antenna towers, masts and accessories with super-low freight costs that lead the industry. Choose from free-standing, bracketed or guyed tower packages and components from ROHN Products, American Tower Company, TBX and more. DX Engineering stocks a huge supply of Phillystran guy lines, grips and a wide variety of tower guying hardware. We have many other antenna tower sections, parts...
At the heart of every successful radio installation is the antenna support structure, because there is no substitute for a radio antenna that has sufficient height! That is why DX Engineering offers easy shopping of an extensive selection of antenna towers, masts and accessories with super-low freight costs that lead the industry. Choose from free-standing, bracketed or guyed tower packages and components from ROHN Products, American Tower Company, TBX and more. DX Engineering stocks a huge supply of Phillystran guy lines, grips and a wide variety of tower guying hardware. We have many other antenna tower sections, parts and accessories, including short and hinged tower bases, wall mounts, guy anchors, accessory shelves, thrust bearings and unique tower side mounts, to name only a few. DX Engineering stocks our own exclusive 2 and 3 inch O.D. ultra-high strength 4130 Chromoly Steel Masts for large rotatable directional antennas. For smaller antennas and budgets, we have the tripods, masts and wall brackets that can also help get your antenna “up there” and on the air. For the best selection of antenna support options with super-easy, online ordering, shop DX Engineering.
ROHN 25G Tower Sections
ROHN 25G Tower Sections are the world standard in galvanized steel tower. ROHN towers use double-bolted joints, which have been proven to be the best method of joining tower sections, for sturdiness and dependability. As a guyed structure, the standard 25G designs may rise to a height of 190 ft. ROHN 25G Tower Sections include the standard straight sections that are 10 ft. in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. 25G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. ROHN 25G Tower Sections feature: * Complete hot dip-galvanizing after fabrication * 11 1/4 in. equilateral triangle design * High-strength tubular legs are joined by continuous, solid round steel bracing cross members * Each straight and top section shipped with all required nuts and bolts for mounting that section, supplied inside one of the section legs. ROHN 25G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! Order your ROHN Tower Sections and other tower installation accessories from DX Engineering today!
( 21 )
$199.99
—
$359.99
DX Engineering TB300 Advanced Design Thrust Bearings
DX Engineering TB300 Advanced Design Thrust Bearings offer a major advance in mechanics that solve the issues with competing tower mast bearings that wear out too quickly They are specifically designed for a vertically mounted 1.5 to 2.0 inch OD tower mast installed for the efficient rotation of directional HF, VHF, UHF and SHF antennas. Introduced in early 2021, the upgraded DX Engineering TB300 features high quality stainless steel ball bearings and stainless steel races that keep the bearings very clean. Compared with ANY OTHER thrust bearings, our TB300 thrust bearings are firm and strong with an ultra-low rotation resistance that has to be seen to be believed. These heavy-duty bearing assemblies are cast from high-strength zinc-aluminum alloy, precision machined and assembled to last for the life of the tower installation. DX Engineering Thrust Bearings are 7 in. diameter overall and mate with tower bearing plates and accessory plates for ROHN or Amerite towers. DX Engineering TB300 thrust bearings mount directly to: -DXE-AS455G DX Engineering Accessory Shelf for inside of ROHN 45G and 55G and Amerite 45 & 55 -Pre-drilled "Flat-Top" Tower Section models ROHN 25AG4 ROHN 45AG4 -Top Bearing Plate models ROHN BPL25G on top of a straight 25G tower section ROHN BPL45G on top of a straight 45G tower section ROHN BPL55G on top of a straight 55G tower section -Tower Top Bearing Plate with Accessory Shelf ROHN BAS25G for top of a straight 25G Tower Sections (may be used on the top of combination model). They may also be used on any Amerite Tower and accessory that corresponds to the ROHN part numbers listed above, including tower-top bearing shelves for AME-25, 45 and 55 series towers. NOTE: Accessory Shelf models that fit inside of ROHN or Amerite 25G do not accommodate DX Engineering Thrust Bearings. These bearings are intended only for top mount on flat top 25G tower. The DXE-TB300 Thrust Bearing, for up to 2 in. OD mast, is supplied complete with hardware. The three stainless steel mast capturing and centering hex head bolts are 3/8-16 x 1-1/2 in. long with stainless steel hex nuts. The mounting hardware, four (4) structural mounting bolts are 1/2-13 x 1-1/4 inch long, and the mounting hex nuts and washers are all galvanized. The TB300 accommodates a mast size range of 1.500 to 2.000 in. OD. Designed and built for vastly improved longevity, our thrust bearings reduce the load on your rotator motor more efficiently than the old standard version. Order DX Engineering TB300 Advanced Design Thrust Bearings for your tower project with 2 inch OD mast.
( 20 )
$265.99
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines
Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines are constructed from tough Aramid fiber. Aramid fiber features excellent dielectric properties and a strength-to-weight ratio five times greater than steel guy wire! Add to that their low-stretch and low-creep characteristics—and you have an ideal material for broadcast tower guys. Today's Phillystran tower guying systems based on Aramid fiber are the result of many years of real-world experience. Phillystran HPTG-I systems eliminate the problems associated with EHS steel cable, such as electromagnetic interference (EMI), radio frequency interference (RFI), signal suppression, directional irregularities and white-noise arcing. You may not have a broadcast tower, but your Amateur Radio tower can benefit by using Phillystran HPTG-I High Performance Broadcast Tower and Antenna Guy Lines from DX Engineering!
( 23 )
$0.99
—
$18,750.00
ROHN Hinged Tower Base Plates
ROHN Hinged Tower Base Plates allow you to mount your ROHN tower using six base bolts embedded in the concrete pier. ROHN hinged base plates enable the tower to be rotated up from the base during installation. Hinged tower base plates must be used with bracketed or guyed tower applications only.
( 8 )
$489.99
—
$1,349.99
ROHN SA253UA Side Arm Mounts
ROHN SA253UA Side Arm Mounts are designed to stand the antenna off the tower by 36 in. and to fit ROHN 25G tower sections with round 1.25 in. legs. Their 3 ft. length allows for the installation of heavy antennas that are capable of mounting to the supplied 2.250 in. diameter mounting tube. Although typically used to mount vertical antennas, they may also be used as a mounting point for many other antenna types, such as dishes, panels, horns, and so on. When your tower calls for a durable, galvanized side-arm mount, you may depend on one of these ROHN SA253UA Side Arm Mounts from DX Engineering to support your antenna project!
( 10 )
$279.99
Amerite Tower Sections
American Tower Company Amerite Tower Sections are a quality alternative to those supplied by other tower makers. The American Tower Company has been making towers since 1953. That should let you know that they provide good, competitive products. Amerite 25, American Tower Company's best-selling tower size, is one of the most versatile, economical, and dependable towers for self-supporting, bracketed, and guyed applications. These tower sections feature a 12-1/2 in. face width with 16-gauge 1-1/4 in. diameter steel tubing legs. Amerite 45 and 55 sections are larger, stronger towers for more demanding applications and greater heights. Amerite tower sections include short bases for embedding in concrete, straight sections to build your tower height, and top sections for mast and antenna support. Additionally, Amerite supplies a short base with a built-in tilt mechanism. This tilt base allows shorter Amerite towers to be lowered for antenna system maintenance. Whether your application is Amateur Radio, Wi-Fi, light commercial two-way or even residential TV reception, American Tower Company Amerite Tower Sections, from DX Engineering, are a great choice for raising your antennas.
( 50 )
$189.99
—
$495.99
DX Engineering Lightning Rod Mast Mounts
The use of DX Engineering Lightning Rod Mast Mounts could protect your tower, antennas and station equipment from disastrous lightning damage. DX Engineering Lightning Rod Mast Mounts are 1/8 in. heavy-duty stainless steel clamps that will long outlast your steel tower. Their optional bolts (choose DXE-LRMM-FAST by combined mast and lightning rod diameters) are also high-quality stainless steel. Together, they are extremely durable clamps to keep your lightning rod in place. Lightning searches out the path of least resistance to ground. If that path is your tower, rotator and rotor bearings, antennas and coax, or the ground and electrical connections to your rigs, then that's where it will go. Providing a better path (one with very little resistance) is the key to keeping lightning outside the shack and limiting damage. When used with proper tower grounding, a heavy rotor-bearing bypass cable and installed coaxial surge protectors, a lightning rod above your antennas may save the day. Don't ignore proper grounding and lightning protection! Make a list of all the items you need to upgrade your station's lightning defense. Make sure a mast mounted lightning rod and DX Engineering Lightning Rod Mast Mounts are added to your list.
Not Yet Reviewed
$75.99
ROHN 45G Tower Sections
ROHN 45G Tower Sections are true multi-use tower sections that provide excellent strength for applications up to 300 ft. The 45G tower sections are offered with heavy steel tube legs to satisfy a wide variety of needs under various conditions.
Not Yet Reviewed
$409.99
—
$485.99
Yaesu Rotator Mast Bearings
Yaesu Rotator Mast Bearings are used to secure rotating mast that is used for directional antennas. These are also known as thrust bearings, because they maintain smooth and steady rotation even when a large lateral thrust of the wind is pushing on the antenna and the mast. These Yaesu bearings stabilize and secure your antenna mast.
( 16 )
$84.99
—
$159.95
Carlson Heavy-Duty 25G Hinged Tower Base Plate
Carlson Heavy-Duty 25G Hinged Tower Base Plates share the same bolt down and leg pattern as Rohn and American Tower 25G series towers, allowing any 25G tower to be tilted up or down for easy maintenance. Made in the USA to accurate tolerances for a smooth and secure fit, the all-steel construction of these extremely heavy-duty hinged base plates, along with Thermal Diffusion Galvanizing, provides a secure foundation for your tower project. Engineers thoughtfully designed all connecting points for these heavy-duty hinged base plates with larger 1/2in. hinge bolts, instead of the standard 3/8in. bolts and the tilt plate and gussets are 3/8in. thick instead of 1/4in. The mounting pegs are solid steel and recessed into the base plate for added strength. The layout of the 3 pegs is 11.25in. center-to-center and the peg diameter is 1.060in. to match the 25G tower leg dimension of 1.080in., allowing .020 of clearance. A Professional Engineer study of this design revealed these base plates are approximately 2 times the strength of their competitors. For bracketed or guyed towers.
( 3 )
$429.99
Amerite Tower Base Plates
American Tower Company Amerite Tower Base Plates allow you to mount your AME-25, 45 or 55 series tower using several different methods. Amerite base plates cannot be used in self-supporting applications… they must be used for bracketed or guyed installations only. Amerite drive-in base plates are for mounting a bracketed or guyed tower directly onto tightly compacted soil; intended for short term and temporary installations. They are made of steel and are completely galvanized. Towers mounted on drive-in base plates MUST be bracketed or guyed at all times. They are designed to prevent the bottom of a temporary tower from "kicking out" and causing tower collapse. They are great for Field Day and other interim applications. Amerite hinged tower base plates allow you to mount your Amerite 25G-series tower using six 1/2 in. x 12 in. base bolts embedded in the concrete pier. Amerite hinged base plates enable the tower to be rotated up from the base during installation. Hinged tower base plates must be used in bracketed or guyed tower applications only. Be confident in your tower installation with Amerite tower base plates. Whether for roof or ground mounting, permanent-hinged or temporary use, these American Tower Company Amerite Tower Base Plates from DX Engineering help to raise your tower!
( 23 )
$119.99
—
$665.99
WiMo GPF-60 Rotator Platforms
WiMo GPF-60 Rotator Platforms are hot-dipped galvanized, sturdy platforms designed for rotators and thrust bearings for rotating masts up to 2.36 in. (60mm) diameter. The fixed mast clamp size range is 1.97 - 2.76 in. (50 to 70mm ) in diameter. The distance from the center of the mast to the end of the platform is approximately 10.83 in. (275mm). The distance from the center of the mast to the center of the mounting position (center of rotor/bearing) is approximately 7.68 in. (195mm). This platform is also designed to accommodate the Yaesu GS-065 Mast Bearing, also available from DX Engineering. Notes: * The Yaesu GS-050 Mast Bearing will NOT fit this mount! * Hy-Gain HAM-IV Rotators have a control cable pigtail on the bottom of the rotator, these rotators must be mounted to the platform using spacers to accommodate the cable. As an alternative, a hole may be drilled into the platform to pass the cable through.
( 2 )
$129.99
Carlson Roof Mounted Antenna Tower
Carlson Roof Mounted Antenna Towers offer a practical solution for Amateur Radio enthusiasts facing restrictions from homeowners' association (HOA) or limited lot space. Their versatility in supporting various types of antennas, including fixed, single-axis, or twin-axis rotators, makes them a valuable option for optimizing frequency coverage in your shack. The range of antennas compatible with Carlson Communications Roof Mounted Towers is diverse, catering to the different needs and preferences within the Amateur Radio community. Popular antenna options like Hex Beams, Low Earth Orbit (LEO) satellite, as well as other popular antennas are well-suited for installation on roof towers, enhancing communication capabilities for operators despite space constraints or regulatory limitations.
( 6 )
$579.98
—
$1,161.98
DX Engineering Tower Accessory Shelves
DX Engineering Tower Accessory Shelves are custom made by DX Engineering in two sizes and styles to fit different size ROHN and Amerite Towers. Made from 3/16 in. thick, laser-cut "304" Stainless Steel, each DXE Accessory Shelf comes with all stainless steel tower mounting hardware for long-lasting, durable strength. Both accessory shelves have four slotted holes (no drilling required*) to mount the most popular rotators from Yaesu, DX Engineering, M2 Antennas and Hy-Gain, and two additional holes are provided for rotator models with six mounting bolts. Rotator or positioner mounting bolts are not included with these plates; they are provided by the manufacturer with each rotator unit. Two models of DX Engineering Tower Accessory Shelves are available. Click the part details below to see more images of each model: - DXE-AS25G fits ROHN 25G and Amerite 25 towers, with formed integral brackets for v-bolt clamps. This plate is used ONLY for mounting a rotator at the top of a 25 top section or where there are no cross braces on a 25 straight section that would interfere with installation and operation of the rotator. NOTE: ROHN 25G does not accommodate mid-section bearings, so there are no holes for bearings. NO BEARINGS can be mounted on the DXE-AS25G. If you want to use a bearing, use a flat top tower section that accommodates a bearing, or install ROHN 45G or 55G Tower and DXE-AS455G Accessory Shelves. - DXE-AS455G is adjustable to fit ROHN 45G and 55G towers and Amerite -45 and -55 towers. This model accessory shelf mounts all of the rotators listed and features additional holes for mounting DX Engineering Thrust Bearings (DXE-TB300 and DXE TB400). These shelves are mounted with 3/16 in. stainless steel L-brackets and double stainless steel V-bolts at each tower leg. DXE-AS455G may be used anywhere in any 45 or 55 section for a rotator or as a bearing shelf, including as a Top Bearing Plate. As with all stainless steel hardware, a good quality anti-seize lubricant, such as Jet-Lube SS-30 (part number JTL-12555) should be used to avoid galling. When installing, mount the shelf level in the tower. Tighten all bolts evenly. *NOTE: Larger holes are only needed when mounting the OR2800 series M2 Antennas rotator. No holes are provided for Hy-Gain HDR-300 series rotators.) DXE-AS-25G Stainless Steel Parts List: 1 - Tower Shelf, laser drilled with integral L-Brackets 3 - V-Bolts, 1.50 in. x 1/4-20 3 - Hardware packages for V-Bolts (Flat Washer, Split Washer and Hex Nut) DXE-AS455G Stainless Steel Parts List: 1 - Tower Plate, 3/16 in., laser drilled 3 - Tower Plate Mounting L-Bracket, laser drilled 6 - V-Bolts, 1.00 - 2.00 in. x 5/16 in. 6 - Hex Head Bolts, 1.00 in. x 5/16 -18 9 - Hardware packs, 5/16 -18 (Flat Washer, Split Washer, Hex Nut)
( 51 )
$109.99
—
$165.99
ROHN Tripod Roof Towers
ROHN tripod roof towers or TRTs feature a universal mast clamp that is capable of mounting masts with up to 1 3/4 in. diameters and swivel feet that adjust to the pitch of almost any roof. Installation is simple and fast with lag screws or bolts (not included) through the feet that securely anchor the towers for long, trouble-free service. ROHN tripod roof towers feature a lower mast support bracket and hot-dip galvanized construction for corrosion protection.
( 25 )
$129.99
—
$159.99
Phillystran PLP Big Grip Dead-Ends
Phillystran has answered the call for field-installable nonmetallic guy systems with their PLP Big Grip Dead-Ends. Designed for use with Phillystran HPTG-I Aramid fiber guy lines, PLP Big Grip Dead-Ends will ensure a stable installation for all of your antenna or tower projects. Features include: * Grips designed to match rope twist * Galvanized steel and "C" coat construction * Cross-over marks that indicate a starting point for installation * Color-coded for easy identification of strand size * Short-leg/long-leg design so installer always knows which leg should be started Designed for use with Phillystran guy line strands, PLP Big Grip Dead-Ends from DX Engineering will ensure a stable installation for all of your antenna or tower projects.
( 7 )
$15.99
—
$35.99
ROHN Mast Wall Mounts
ROHN Mast Wall Mounts can be used on masonry, wood, metal, and other types of walls using up to 1/4 in. diameter lag screws or bolts. These mounts employ rugged steel brackets for extra support and rigidity. ROHN wall mounts are versatile, with the available standoff distances allowing for clearance on most structures. Their mast clamps accept a large range of masts--from 7/8 in. to 2 3/4 in. outside diameter! Available in single or double bracket designs, these brackets offer maximum mast support. Masts are held in place, within the brackets, with a unique "Anti-Twist" locking clamp that prevents undesirable mast rotation. Galvanized for durability, these ROHN Mast Wall Mounts are designed to give many, many years of service. Contact DX Engineering for your own ROHN Mast Wall Mounts... today!
( 66 )
$47.99
—
$567.99
DX Engineering TB400 Advanced Design Thrust Bearings
DX Engineering TB-400 Advanced Design Thrust Bearings offer a major advance in mechanics that solve the issues with competing tower mast bearings that wear out too quickly. They are specifically designed for a vertically mounted 2.5 to 3.0 inch OD tower mast installed for the efficient rotation of directional HF, VHF, UHF and SHF antennas. Introduced in early 2022, the upgraded DX Engineering TB400 features high quality stainless steel ball bearings and stainless steel races that keep the bearings very clean. Compared with ANY OTHER thrust bearings, our TB400 thrust bearings are firm and strong with an ultra-low rotation resistance that has to be seen to be believed. These heavy-duty bearing assemblies are cast from high-strength zinc-aluminum alloy, precision machined and assembled to last for the life of the tower installation. DX Engineering Thrust Bearings are 7 in. diameter overall and mate with tower bearing plates for ROHN or Amerite towers. DX Engineering thrust bearings mount directly to the pre-drilled "Flat-Top" Tower Section models 25AG4 45AG4, as well as on Bearing Plate models BPL25G, BPL45G, or BPL55G which may be added to straight 25G, 45G or 55G Tower Sections, respectively. They may be used on the combination model BAS25G Bearing Accessory Shelf for straight 25G Tower Sections. They may also be used on any Amerite Tower and accessory that corresponds to the ROHN part numbers listed above, including tower-top bearing shelves for AME-25, 45 and 55 series towers. NOTE: Accessory Shelf models that fit inside of ROHN or Amerite 25G do not accommodate DX Engineering Thrust Bearings. These bearings are intended only for top mount on flat top 25G tower. The DXE-TB400 3 inch Thrust Bearing includes mounting hardware Patch Bolts (4) are 1/2-13 x 1-1/4 inch long. Patch Bolts have a yellow thread lock compound (one time use) on the threads to help ensure the bolts stay tight once installed. If removed, another thread lock compound will be needed prior to re-installation. The three stainless steel mast capturing and centering hex head bolts are 3/8-16 x 1-1/2 in. long with stainless steel hex nuts. The TB400 accommodates a mast size range of 2.500 to 3.000 in. OD. Designed and built for greatly improved longevity, our thrust bearings reduce the load on your rotator motor more efficiently than the old standard version. Order DX Engineering Advanced Design Thrust Bearings… today!
( 1 )
$321.99
ROHN Self-Supporting Concrete Base Plates
ROHN self-supporting tower base plates ensure the proper installation of your ROHN 25G or45G series tower when anchored to a concrete base with 5/8 x 12.0 in. bolts. ROHN concrete base plates are made from durable, 1/2 in. thick galvanized steel.
( 1 )
$349.99
ROHN Tower Section Joint Bolt Kits
DX Engineering not only offers ROHN tower products, but their accessories as well! ROHN tower section joint bolt kits are available for the 25G, 45G, and 55G towers. Each kit has the necessary bolts and nuts to fasten one section to another. Bolts are galvanized for long lasting protection. Do you want the best? See the ROHN tower products and installation accessories at DX Engineering!
( 16 )
$19.99
—
$43.99
Carlson Model 25 Tower Lifts
Carlson Model 25 Tower Lifts are designed for use with Rohn® 25G and Amerite® 25 towers and is a precision-engineered mechanical elevator system that eliminates the need to repeatedly climb sectional lattice towers to perform needed servicing. The initial release, Model 25, works on ROHN® 25G and Amerite® 25 towers up to 60-feet tall. The Carlson Tower Lift can be installed together with new tower installations and retrofitted onto existing towers. The Lift secures the tower-top equipment – antenna(s), mast, rotator, thrust bearing – into a sturdy Carriage that is mechanically raised and lowered on the tower from ground level with an integrated winch-and-pulley system. The Lift enables the antenna and equipment to be lowered to a comfortable working height to safely and easily perform basic antenna equipment service, maintenance and replacement. The Lift then raises the Carriage and equipment back to the top of the tower.
Not Yet Reviewed
$1,499.00
ROHN 55G Tower Sections
ROHN 55G Tower Sections provide excellent strength for applications up to the 400 ft. level. 55G tower sections are constructed with heavy steel tube legs to satisfy a wide variety of needs under various conditions. ROHN supports their 55G towers with a complete line of quality parts and accessories designed for an exact part-to-part match. ROHN 55G Tower Sections include the standard straight sections that are 10 feet in length. Also, special short sections are available in various lengths to suit your tower base or shipment needs. These 55G Tower Sections are offered in several different top section configurations to accommodate various mast sizes and antenna mounting or rotating requirements. Towers constructed from ROHN 55G Tower Sections are especially useful in places where unusually high wind loading and height requirements exist. ROHN 55G Tower Sections are available directly from DX Engineering at competitive shipping rates. The more you order, the better the deal! When you require tough, well-engineered tower sections for that new antenna farm, order your ROHN 55G Tower Sections from DX Engineering! Features of all ROHN 55G Tower Sections: * Built on a 17 in. equilateral triangle design * High-strength tubular legs joined by ROHN's Zig-Zag bracing crossmembers * Double-bolted leg joints for strength and reliability * Continuous solid-round steel bracing used throughout * Bracing welded directly to tower legs * Each section is shipped with all required nuts and bolts * Completely hot-dip galvanized after fabrication
Not Yet Reviewed
$519.99
ROHN BPC25G Concrete Base Plates
These ROHN BPC25G Concrete Base Plates provide an easy and secure way to mount your guyed or bracketed ROHN 25G tower to a concrete pier, without the need for embedding a tower section in concrete. With these base plates, only a single 3/4 x 12 in. Pier Pin embedded in the standard concrete base is required to anchor the base of a ROHN 25G Series guyed tower. This is possible since lateral forces are minimized at the base of the tower. A slight pivoting of the pier pin anchored tower base is natural and allowable, as virtually all of the guyed tower forces are exerted vertically onto the concrete pier. BPC25G Concrete Base Plates are completely hot-dip galvanized after fabrication and are designed to work only with Rohn 25G Series straight tower sections. Setting the standard in towers for decades, Rohn has supported more ham antennas than any other brand. Start your tower build with one of these BPC25G Concrete Base Plates from DX Engineering!
( 6 )
$129.99
ROHN Tower Base Bolts
ROHN Tower Base Bolts are galvanized steel bolts that are set into the concrete base pier when it is poured. These bolts anchor ROHN Tower Concrete Base Plates and Hinged Base Plates to the concrete pier.
( 4 )
$31.99
—
$499.99