Availability
ELAD Transceivers and Receivers
ELAD FDM-S3 SDR Receivers
ELAD FDM-S3 SDR Receivers are outstanding Software Defined Radios with impressive performance features. The Italian manufacturer, ELAD, has pushed the boundaries of modern SDR design with this model. For instance, the FDM-S3 offers an incredible 24 MHz bandwidth that can be scanned simultaneously, allowing up to four receivers to operate at the same time—a feature typically reserved for much more expensive receivers. The FDM-S3 functions as a direct sampling SDR with a variable sampling rate of up to 122.8 MHz. It covers a reception range from 9 kHz to 108 MHz, with an optional downconverter available for even higher frequencies. One of the unique aspects of the FDM-S3 is its variable sampling rate, which ranges from 98 to 122 MHz depending on the band. This flexibility allows for more favorable divider ratios for down-sampling, enhancing sensitivity and dynamic range.
( 1 )
$965.19
—
$1,015.99
ELAD TM-2 Console for SDR Radios
ELAD TM-2 Console for SDR Radio is a remarkable desktop USB controller that provides the knobs, buttons and display for the operation of a several different software programs for Software Defined Radio receivers and transceivers. Developed specifically for Software Defined Radio users who prefer the tactile operational comfort of a 'traditional' knobs and buttons radio while using the most up-to-date SDR technology. The TM-2 allows the manual manipulation of an SDR or rig control program without the need to touch a mouse or watch a computer monitor. This is especially helpful when a limited screen area is in use by other programs for logging, digital and contest operations. The ELAD TM-2 controller (formerly known as the WoodBoxRadio Tmate 2) is connected by USB to the computer that is running the SDR or rig control software. Depending on the software it offers controls that are typical of a traditional radio front panel as well as many extra controls with programming menus. The selectable color backlit Liquid Crystal Display shows the current frequency, the signal level, the current mode and much more. Six push buttons are available for often used functions, such as mode selection, step width, receiver mute etc. Equipped with heavy, metal knobs, one large rotary encoder serves as the "VFO" frequency control, while two smaller metal knobs can be assigned for AF Gain, RF Gain or Filter Width control, or to most other functions, as desired. Each of the rotary encoders is also a push button, which may be used to toggle the knob to many other assignable functions. Since it is so important, it bears repeating: one of the biggest benefits of the TM-2 is that instant and simultaneous control and display of frequency, mode and other conditions of the SDR receiver or transceiver program is possible, all while a logging, digital mode or contesting program is active in the foreground on the computer monitor. Connect the TM-2 to the computer running the SDR program or rig control using the included USB A to USB B cable. This controller uses the standardized HID protocol for USB devices, so it does not require special drivers on recent operating systems. The TM-2 case is metal, giving it a solid touch and feel with a convenient 45-degree angled panel. Power is supplied over the USB connection, so a separate power supply is not required. The TM-2 dimensions are WHD is 5.630 x 3.071 x 5.315 in. (143 x 78 x 135mm) and it weighs 1.72 lbs. (780g). NOTE: The operation of this device can require the installation of additional software and drivers, which are not included in the shipment, and which may require an additional purchase. The appropriate free software (e.g. Tmate2CatConsole) appears at the manufacturer's website. Supported Programs and Devices for the Elad TM-2 The TM-2 can be used directly with these programs [*] without additional software: • FDM-SW1 [*] • FDM-SW2 [*] • Studio1 [*] • SDR-Radio Console V2 [*] • N4PY Software [*] and more... For operation of the TM-2, these programs (**) require additional software, not included: • PowerSDR (FlexRadio, Beta status, requires Tmate2CatControl Software) [**] • Perseus (Microtelecom, Alpha status, requires Tmate2CatControl Software) [**] • HPSDR PowerSDR (Apache Labs ANAN-xx Transceiver, Beta Status, requires Tmate2CatConsole Software) [**] Required Downloads [**] a) Tmate2CatControl available from eladit.com download, free of charge, and b) Virtual Serial Port Emulator for 64 Bit operating systems, which is purchased and downloaded online from Eterlogic, a trusted Norwegian company.
( 2 )
$289.99
ELAD FDM-DUO-R SDR Receivers
ELAD FDM-DUO-R SDR Receivers showcase ELAD's renowned sleek Italian design and cutting-edge technology. Following the great success of the FDM-DUO transceiver, ELAD has introduced the FDM-DUO-R receiver. The FDM-DUO-R is a shortwave receiver that utilizes state-of-the-art SDR technology that can be operated like a traditional radio. It includes familiar controls such as a large VFO knob, dials for volume and filters, and pushbuttons for frequently used settings, making it as user-friendly as a classic receiver. Its advanced internal components, including a fast AD converter and powerful digital processing capabilities, ensure excellent reception, like the FDM-S2 and FDM-DUO.
( 1 )
$1,043.99
ELAD FDM-DUO SDR Transceivers
ELAD FDM-DUO SDR Transceivers are versatile SDR QRP transceivers with a 5W output that can operate independently without a PC. This compact device incorporates the latest SDR technology, featuring a fast analog-digital converter that directly samples the received HF signals into digital form. A downstream DSP module handles filtering and processing, while an ARM processor manages the control unit signals.
( 3 )
$1,329.99
—
$1,372.99