Availability
ICOM Transceivers and Receivers
On Sale
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,898.95
—
$3,999.95
$3,704.00
—
$3,898.95
ICOM IC-R8600 Communications Receivers
ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!
( 16 )
$2,799.95
—
$3,249.95
Icom RC7760 Remote Control Head Units
Icom RC7760 Remote Control Head Units – available here as an identical extra or replacement – work exclusively with the RF Deck of an IC-7760 Transceiver. This separate item is exactly the same Remote Control Head as supplied with the IC-7760, featuring both the 7-inch wide TFT and a 2.4-inch TFT. Functions are accessed and information is displayed exactly as on the Remote Control Head supplied with the IC-7760, including dual speakers for the independent MAIN and SUB receivers. An AC-DC wall supply (BC-267A) is included. For use remotely or as a backup replacement, the Icom RC7760 is available from DX Engineering.
Not Yet Reviewed
$2,189.95
ICOM D-STAR Third Generation Repeaters
ICOM D-STAR Third Generation Repeaters support analog, D-STAR and a mixed mode configuration. While analog operation is for local communications, combine the D-STAR mode with the ID-RP3 G3 software to join the D-STAR Global network. In addition to mixed mode functionality, the G3 hardware combines the D-STAR repeater controller and RF module into one 2U rack mount unit. Model, Output Power, Frequencies, Modes: ID-RP2010V, 25W, 144-148 MHz, DV/FM; ID-RP4010V, 25W, 440-450 MHz, DV/FM; ID-RP1200VD, 10W, 1240-1300 MHz, DV/DD*/FM An integrated controller is built onto the repeater to function with the RF module unit. Additionally, each repeater can act independently to relay receive signals. Connect the repeaters with the supplied Ethernet cable for cross-band operation. The repeater's RF module in the repeater can operate as a single band D-STAR/FM repeater; the ID-RP2C is not required. *The ID-RP1200VD is a 1.2 GHz repeater that is switchable between DV or DD mode. DD mode operation acts as a wireless modem through a computer's Ethernet port to provide data communication and internet access up to 128 kbps. Use the IC-9700's 1.2 GHz DD mode to set it up as a wireless modem. Key Features of the D-Star Third Generation Repeaters: - LTE capable, suitable for emergency deployments - RF direct sampling and FPGA platform - Compatible with the external ID-RP2C repeater controller - SD card slot for firmware updates save setting data, FM mode, and Voice ID audio Connect the optional LTE unit, UX-262 to directly connect an LTE network and the internet. One LTE network can be shared with multiple repeater modules on one site. A data SIM card provides network coverage. A static Global IP address is required for the internet SIM. Combining the internal Gateway function and the LTE unit can make a deployable provisional D-STAR repeater site for emergency situations.** ** Please check the legal requirements before using the provisional repeater site The IDRP2010V/RP4010V repeater uses the latest RF Direct Sampling method. The ID-RP1200VD uses a 1.2GHz, Down Conversion IF sampling. This means when the signals are processed in the FPGA, it greatly improves the receiver's sensitivity. Other Features: - High duty cycle operation - Replace a repeater module in the ID-RP2 series D-STAR repeaters, as the new modules are compatible with the ID-RP2C controller - CW ID/Voice ID transmitter - SD card slot for firmware updates, save setting data, FM mode, and Voice ID audio - Each RF module has a 10 MHz reference signal input - Each RF module has an internal controller providing CTCSS, DTCS codes, 1750 Hz tone and CW/Voice ID programmable for analog FM mode Supplied Accessories: - DC power cable (3m, 9.8 ft.) - Fuses - Ethernet cable (0.6m, 2.0 ft.) - Rubber stands - USB cable (1M, 3.2 ft.) - Allen wrench More information is available from the Icom America website. Order ICOM D-STAR Third Generation Repeaters from DX Engineering.
Not Yet Reviewed
$2,688.99
On Sale
ICOM IC-905 VHF/UHF/SHF All Mode Base/Portable Transceivers
ICOM IC-905 VHF/UHF/SHF All Mode +ATV Base/Portable Transceivers are 10 W QRP 144/430/1200/2400/5600 MHz All Mode +ATV Base/Portable Transceivers that hold the distinction of being the first in the industry to offer the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). The IC-905 offers all common operating modes - SSB and CW, AM/FM, and full D-Star functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz and 0.5W with the optional 10 GHz module.
( 3 )
$3,199.95
$2,699.95