Availability
Instant Rebate
Manufacturer Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,399.95
Instant Rebate
Kenwood TS-890S HF/50MHz Transceiver
Kenwood TS-890S HF/50MHz Transceiver: The most rewarding results often take place when faced with the harshest and most challenging conditions. HF enthusiasts know this all too well because of their love of HF. KENWOOD has the answer. Achieve results through certainty, not circumstance—delivered with impeccable receiver and audio performance. Introducing Kenwood's most advanced DSP transceiver, the TS-890S. Key features of the Kenwood TS-890S HF + 6M Transceiver: * 160-6 meters 100W All Modes * Full Down-Conversion Superheterodyne * Extra-low phase noise Local Oscillator * Built-in Roofing Filters, 15 kHz, 6 kHz, 2.7 kHz, and 500 Hz (270 Hz optional) * 7 in. TFT color display * High-speed Independent Band Scope * Animated Meter display toggles between TS-930 and TS-940 meter styles at a touch! * External display connector (DVI-I) * ANT output for external receiver * RF Attenuator (OFF/6/12/18dB) * Advanced DSP Noise Reduction function * Heavy-duty design delivers transmitter performance and endurance operation * Built-in high-speed automatic antenna tuner for rapid band changes * Encode and decode built-in for CW / PSK / RTTY * 120 channel memory * 3 PF keys (preferred function) * Screen capture * Remote operation via direct LAN connection (see KNS in owner's manual) * Multiple USB connections * KEYPAD jack (add up to 8 external PF keys) Place your order here for the Kenwood TS-890S.
( 33 )
$4,399.95
Instant Rebate
Kenwood TS-990S HF/6 Meter Base Transceivers
The ultimate Contest/DX experience is here! Kenwood's flagship HF model is equipped with the latest technology and represents an entirely new standard in HF Amateur Radio communications equipment. Kenwood TS-990S HF/6 Meter Base Transceivers come equipped with dual receivers for simultaneous reception on different bands. They also feature narrow-band roofing filters on the main receiver in a full down-conversion configuration. TS-990S features include: * Down-conversion for all amateur bands on main RX * Newly developed mixer achieves 40dBm IP3 * Narrow-band High-IP roofing filters * Comes with 0.1 ppm TCXO * DSP for main receiver, sub-receiver and band scope * Advanced AGC control * Extensive interference and noise reduction functions * Built-in automatic ATU * Dual TFT displays * USB Firmware Updates * Data mode supported by external I/O switching * Transmit and receive DSP equalizers * Two USB Ports on front panel * Voice guidance/Recording function * Remote control from your PC General details: * TX Frequency range: All Amateur bands 1.8 to 54.0 MHz * General coverage RX: Continuous 30 kHz to 60 MHz * Modes: CW, SSB, FSK, PSK, AM, FM * Stability: Plus/minus 0.1 ppm 32 degrees F to 122 F * Antenna impedance: 50 ohms * ATU range: 16.7 to 150 ohms * Line voltage: AC 120 V (60 Hz) * Power consumption: TX: 720 VA, RX: 120 VA (no signal) * Temperature range: 32 degrees F to 122 F * Dimensions in inches: 18.11 W x 6.50 H x 15.75 D Transmitter Details: * Output power: CW/SSB/FSK/PSK/FM (AM); 200 W (50 W) * Modulation SSB: Balanced, AM: Low Power, FM: Reactance * Spurious emissions: HF (Harmonics) -60 dB or less, HF (others) -50 dB or less 50 MHz -66 dB or less * Carrier suppression: -60 dB or less * Sideband suppression: -60 dB or less * Microphone impedance 600 ohms * XIT variable range: Plus/minus 9.999 kHz * Maximum frequency deviation (FM) wide: Plus/minus 5 kHz, (NFM): 2.5 kHz * Transmit frequency response: Within -6 dB (300 to 2700 Hz) Receiver: * Circuit type: Double or Triple Superheterodyne (depending on band/mode) * Sensitivity (TYP): SSB, CW, FSK, PSK (S/N 10 dB); 0.2 uV (1.705 to 24.5 MHz), 0.13 uV (24.5 to 54 MHz) * Sensitivity AM (S/N 10 dB): 2 uV (1.705 to 24.5 MHz), 1.3 uV (24.5 to 54 MHz) * Sensitivity FM (12 dB SINAD): 0.22 uV (28 to 30 MHz), 0.22 uV (50 to 54 MHz) * Image Rejection HF/(50 MHz): 70 dB/(60 dB) or less * IF Rejection Ratio 70 dB or less * SSB Selectivity 200 to 2800 Hz: 2.4 kHz or more (-6 dB), 4.4 kHz or less (-60 dB) CW, FSK, PSK Selectivity (WIDTH: 500 Hz): 500 Hz or more (-6 dB), 1.2 kHz or less (-60 dB) * AM Selectivity: 100 to 3000 Hz: 6.0 kHz or more (-6 dB), 12 kHz or less (-50 dB) * FM Selectivity: 12 kHz or more (-6 dB), 25 kHz or less (-50 dB) * XIT variable range: Plus/minus 9.999 kHz * Notch filter attenuation: 60 dB or more (Auto), 70 dB or more (Manual) * Beat cancel attenuation: 40 dB or more Note: For additional information, please look at the files under the "Documentation" tab. Get more DX! Contesters and DX Chasers will appreciate every feature on these TS-990 radios. Your time in the shack isn't unlimited. Give yourself every opportunity to make each possible contact. Couple a 200 watt transmitter and one of the most capable receivers on the planet to YOUR antenna system. Order one of your own Kenwood TS-990S HF/6 Meter Base Transceivers from DX Engineering!
( 4 )
$9,699.95
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 166 )
$1,499.95
Instant Rebate
Yaesu FTDX-101D HF/50MHz 100W Transceivers
The Yaesu FTDX-101D HF/50MHz 100W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101D may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector**, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Some of the impressive features and specs of the Yaesu FTDX-101D include: * High-Class 160 to 6 Meters 100 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. * Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) * Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR * 9 MHz IF Roofing Filters with excellent Shape Factor * 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) *Ultra-low phase noise 1st Local Oscillator * Completely independent dual receivers with general coverage receive *High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-In Main RX, Option for Sub RX) * Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101D HF/50MHz 100W Transceiver from DX Engineering. Click 'More Detail' below to see additional information about the FTDX-101D HF/50MHz 100W Transceivers. The 200 watt version, Yaesu FTDX-101MP is displayed separately in the Base Transceivers area. **NOTE: The Yaesu FTDX-101D has the VC Tune Preselector installed in the MAIN receiver and 12 kHz, 3 kHz and 600 Hz roofing filters installed in the MAIN and SUB receivers. A second VC Tune Preselector is optional for the SUB receiver and four optional roofing filters, 300 Hz and 1.2 kHz for the MAIN and SUB, are available only by transceiver special order. Installation and calibration are done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101D shipped from stock cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom built FTDX-101D.
( 53 )
$3,749.99
Instant Rebate
Yaesu FTDX-101MP HF+50MHz 200W Transceivers
The Yaesu FTDX-101MP HF+50MHz 200W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101MP may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Here are some of the impressive features and specs of the amazing Yaesu FTDX-101MP: - High-Class 160 to 6 Meters 200 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. - FPS-101 Separate External Speaker and Power Supply combination is included - Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) - Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR - 9 MHz IF roofing filter with excellent Shape Factor** - 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) - Ultra-low phase noise 1st Local Oscillator - Completely independent dual receivers with general coverage receive - High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-in Main and Sub Receivers) - Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch (AN) Click 'More Detail' below to see additional information about the FTDX-101MP HF/50MHz 200W Transceivers. The 100 watt version, Yaesu FTDX-101D is also displayed in the Base Transceivers area. Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101MP HF/50MHz 200 Watt Transceiver from DX Engineering. **NOTE: The Yaesu FTDX-101MP has the VC Tune Preselector installed in the MAIN and SUB receivers. Roofing filters installed in the MAIN and SUB receivers are the 12 kHz, 3 kHz and 600 Hz, plus a 300 Hz is installed in only the MAIN receiver. Three optional roofing filters are available, the 300 Hz for the SUB receiver and 1.2 kHz for the MAIN and SUB receivers. Installation and calibration is done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101MP ordered on the web, and shipped from stock, cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom equipped Yaesu FTDX-101MP.
( 44 )
$5,098.95