Availability
On Sale
Icom IC-7300MK2 HF/50MHz Base Transceivers
Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities
( 30 )
$1,499.95
$1,398.95
On Sale
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 125 )
$2,099.95
$1,998.95
On Sale
ICOM IC-7760 HF/50MHz All Mode Base Transceivers
ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!
( 8 )
$6,999.95
$5,998.95
On Sale
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,999.95
$3,898.95
On Sale
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
$698.95
On Sale
ICOM IC-V3500 2M VHF FM Mobile Transceivers
Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications
( 10 )
$239.95
$234.95
On Sale
Manufacturer Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 166 )
$1,699.95
$1,649.95
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$139.95
$129.95
On Sale
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!
( 29 )
$239.95
$169.00
On Sale
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
$459.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
On Sale
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers are ultra-compact and come loaded with useful high-tech features that make the operation of this transceiver smooth and easy. Its large, color-selectable LCD display is easy to read and the multi-function back-lit handheld microphone with a DTMF keypad enables direct frequency entry and remote control. The DR-CS25T features excellent transmit/receive audio, 200 memory channels, frequency and channel scanning capabilities and more. Affordable and easy to use, the all-new DR-CS25T will offer everything you expect from a 222 MHz mobile transceiver. Alinco DR-CS25 Features: - Output power selectable 50W / 25W / 10W - PC-programmable 200 channel - Alphanumeric name tags - Wide variety of selective calling features - Built-In, 2-Tone/5-Tone, 51 CTCSS, 1024 DCS, 4 Tone-burst tones and DTMF / ANI decode - Large, bright LCD and easy-to-operate backlit microphone keys - Multi-function microphone enables direct frequency entry & remote control - Various scan modes, Key lock, Wide / Narrow operations and more! - Clean, clear Alinco audio
( 11 )
$269.95
$259.95
On Sale
Alinco DR-735T VHF/UHF Transceivers
Alinco DR-735T VHF/UHF Transceivers feature eight full color LED backlights that enable you to customize your display colors! DR-735s let you assign different colors for different functions. These "beautifully simple" radios have fully independent VHF/UHF keys and dials to deliver true dual-band operation. The removable front panel can be remotely mounted or inverted for optimal speaker placement. DR-735 features include: * Full-duplex receiver enables simultaneous TX/RX within 144/440MHz bands as well as V/V and U/U receiver capability. Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two monoband radios rather than a dual band transceiver. * Simply press the volume knob to select the VFO you wish to use for transmitting. * Cross-band repeater function available on all DR-735T radios. (Be sure to observe all regulations applicable to cross-band operation.) * Computer programmable with free software from Alinco. * "Set Mode" menus are divided into basic and advanced, allowing you to assign less frequently used modes such as auto power off or busy channel lockout to set and forget. * Large heatsink and quiet fan for stability while operating * Wide and narrow ceramic filters enable true narrow band operation * Two speaker ports located on the back of the unit allow you to separate signals by both right and left sides or by internal or external speakers using audio from a single external source. Additional conveniences include: * Easy repeater access: These radios feature manual shift and offset direction setting plus preset and programmable auto-repeater settings. Includes 4 tone-burst tones * Versatile memory functions: Include 1,000 memory channels in 10 banks, 100 right-only/100 left-only memories, 100 dual memories, 5 pairs of programmed-scan channels, and 2 call channels. * Easy-to-Read Display: Large LCD screen offers adjustable display brightness, color and contrast along with 6-character alphanumeric tags, a brightness timer that boosts light levels temporarily when keys are engaged and a "scan light" feature that increases brightness for two seconds when scanning stops. * Convenient Receiver Functions: Include popular functions such as pager (icon and beep tones), extended receive, aviation and utility monitoring on VHF and UHF frequencies, a variety of selectable channel steps, CTCSS/DCS capabilities for selective monitoring, a 10dB RX attenuator, sub-band mute, reception image rejection and auto-power-off. Advanced Transmitting Features: Valued by many seasoned operators, these features are part of the set mode menu that includes time-out-timer and busy channel lockout as well as an adjustable mid-power output level, microphone gain adjustment and cross-band repeat (T model only)*. Selectable Scan Modes: Choose from a variety of scan modes that include VFO, memory, programmed or priority scans with busy and timed modes, CTCSS/DCS tone detection and memory scans with "skip" and "favorite" settings. (Utility software required for priority scan setting.) Popular Features: Other popular features include single-band mode, a restore function that recalls set-mode settings even after a complete reset, five different reset modes (system, complete, VFO, memory and color resets), cable-cloning and utility software. Note: For additional information, please look at the files under the "Documentation" tab. Included equipment: * Microphone: EMS-79 DTMF (standard on "T" version) * DC power cable: UA38Y * Bracket Hardware Pack: ADFM78 Optional equipment: * Digital modulation unit: EJ-47U * Control head separation kit: EDS-30 * 8-pin microphone adapter: EDS-8 * USB Computer interface cable: ERW-7 Are you looking for a great dual-bander? Look no farther than one of these Alinco DR-735 VHF/UHF Transceivers from DX Engineering!
( 39 )
$345.95
$329.95
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
On Sale
WiMo PicoAPRS and VHF Transceiver with GPS Receiver
WiMo PicoAPRS and VHF Transceiver with GPS Receiver - The world's smallest APRS transceiver gets even better with the introduction of Version 4 of this great little device! As in previous versions, a TNC and a GPS receiver are still included with the addition of a VHF 2-meter handheld transceiver that includes features like a PTT button, microphone, speaker, stored memories, color display and much more! The PicoAPRS V4 is a complete packet radio transceiver with built-in TNC for APRS
( 9 )
$429.99
$343.99
On Sale
Alinco DR-06TA 6 Meter FM Mobile Transceivers
Alinco DR-06TA 6-Meter FM Mobile Transceivers are capable, compact 6-Meter, 50 watt FM rigs. With the DR-06TA you will discover excitement working worldwide "Magic Band" communications! Working DX is possible over thousands of miles when taking advantage of unique propagation such as Sporadic-E, F2 reflection and meteor scatter, just to name a few. Of course even without favorable propagation conditions, 6 meter repeaters will keep you communicating with friends as well. When the Magic Band opens, the world is within your reach with just a few watts. Be part of the fun! These compact, affordable, easy-to-use mono-band rigs will make your QSOs more enjoyable at home or on the road, so take a closer look at 6m FM and Alinco! Features of Alinco DR-06TA 6-Meter FM Mobiles: * 100 alpha-numeric memory channels * CTCSS, DCS encode plus decode, DTMF encode and Tone-burst are all standard * Ten autodial memories * Clean, clear Alinco audio * Super-wide 7 character alphanumeric display * Wide and narrow FM modes * Theft alarm feature * A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more! * Stays in mode you select (even voice/packet) through power-off cycles * Revised NEW manufacturing to be compliant to RoHS/lead-free order in the EU. Specifications: * Frequency range: TX: 50 to 53.995 MHz RX: 40 to 69.995 MHz * Operating modes: FM=16K0F3E * Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz * Memory: 100 channels plus 1 quick recall * Antenna impedance: 50-ohm unbalanced (SO-239) * Frequency stability: Plus/minus 7 ppm * Power supply: 13.8V Nominal, 11.7 to 15.8 volts * Current drain: TX High 11.0 amps, RX 0.6 amps maximum * Usable temperature range 14 degrees F to 140 F (-10 degrees C to 60 degrees C) * Dimensions (WHD, w/out projections): 5.59 in. x 1.57 in. x 6.85 in. (142 mm x 40 mm x 174 mm) * Weight: 35.3 oz. (approx. 1 kg) * CTCSS tone encoder/decoder: 39 tones * Digital Coded Squelch encoder/decoder: 104 codes Transmitter: * Output power: Approximately 50W (HI) 20W (MID) Approx. 5W (LOW) * Modulation system: Variable reactance frequency modulation * Spurious emission: Less than -60 dB * Maximum frequency deviation: (FM) plus/minus 5 kHz / (NFM) plus/minus 2.5 kHz Receiver: * Receive system Double-conversion Super-heterodyne * Sensitivity (-12dB SINAD) Less than -12.0dBu * Intermediate frequency 1st IF 10.7 MHz, 2nd IF 450 kHz * Selectivity: (FM) -6dB plus/minus 12 kHz or more, -60dB plus/minus 28 kHz or less, (NFM) -6dB plus/minus 6 kHz or more, -60dB: plus/minus 16 kHz or less * Audio output power More than 2 W (8-ohms at 10 percent THD) Note: For additional information, please look at the files under the "Documentation" tab. Included accessories: * Instruction manual * EMS-57 DTMF Microphone * Mounting Bracket w/screw kit * DC Power Cable (ADUA38) * Mobile microphone holder * Alarm Cable Optional Accessories: * Microphones EMS-53 non-keypad microphone * ADUA38 - Spare DC Power Cable * ADFM78 – Spare Mounting Bracket * DM330MVT - DC Power Supply, 120 VAC In, 13.8 VDC Out at 30A, switching * EJ-41U internal TNC board is available as an option for 1200/9600bps packet; no need to remove mic for packet operation Operating 6-meter mobile can be a great way to pass travel time. After all, it's the Magic Band! Whether it's FM Sporadic-E DX or local repeaters, one of these Alinco DR-06TA 6-Meter FM Mobile Transceivers, from DX Engineering, offers some real mobile fun!
( 3 )
$255.95
$249.95
On Sale
Alinco DJ-MD5XLT VHF/UHF Dual Band DMR Handheld Transceivers
Alinco DJ-MD5XLT VHF/UHF Dual Band DMR Handheld Transceivers are Alinco's latest 3rd Generation Part 90 certified handheld transceivers with built-in GPS to hit their exciting Amateur Radio and Commercial line-up of Digital handhelds. -- Please CLICK or TAP on the title of a listed item for an overview: a complete description, Specifications, Required and Suggested Parts. Links to instruction manuals and charts appear in Documentation.
( 3 )
$299.95
$259.95
On Sale
Alinco DJ-G46T Cross-Touch GMRS+FRS Hand-Held Radios
Alinco DJ-G46T Cross-Touch GMRS+FRS Hand-Held Radios are an excellent alternative to cellphones for communicating with someone nearby in various environments. These 5W weatherproof radios are GMRS repeater-ready with features such as hands-free VOX, keypad lock, voice guidance and a handy LED flashlight. Expected coverage is up to 2 miles or more when located in flat, noise-free environments. The coverage distance will become drastically reduced in urban and noisy environments and will depend heavily on the local environment; this distance is extendable with the use of a GMRS repeater service.
( 3 )
$119.95
$99.95
On Sale
DX Engineering Switch Pad 8 Transceiver Memory Keypad
DX Engineering Switch Pad 8 Transceiver Memory Keypad is an eight-button external keypad inspired by DM2RM for use with specific Icom and Kenwood transceivers. It provides a method of selecting voice and CW keying memories without the need to access the keyer menu on the transceiver's main touch screen. This prevents the reduction of the functionality of the main screen during contesting. It also enhances transceiver keyer memory access without the need to integrate the radio with a computer program. For these Kenwood transceivers, in addition to memory keyer access, any of 99 different functions may be programmed to respond to one of the eight buttons on this external keypad, as described in the transceiver manuals. This convenient keypad connects to the appropriately named 3.5mm port only on these transceivers: Icom IC-705, IC-7610, IC-7850 and IC-7851 Kenwood TS-890S and TS-990S See your transceiver manual for functional details of using an external keypad. This item will operate as described. The Switch Pad 8 has an internal jumper to select for use with either Icom or Kenwood. Here is another quality accessory designed for specific high-quality transceivers; the DX Engineering Switch Pad 8 Transceiver Memory Keypad is ready to enhance your transceiver's operations. A complete set of replacement buttons is available. Order part number: DXE-SWP8-BTN
( 21 )
$96.99
$86.99
On Sale
Manufacturer Rebate
Yaesu FTDX-101D HF/50MHz 100W Transceivers
The Yaesu FTDX-101D HF/50MHz 100W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101D may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector**, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Some of the impressive features and specs of the Yaesu FTDX-101D include: * High-Class 160 to 6 Meters 100 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. * Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) * Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR * 9 MHz IF Roofing Filters with excellent Shape Factor * 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) *Ultra-low phase noise 1st Local Oscillator * Completely independent dual receivers with general coverage receive *High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-In Main RX, Option for Sub RX) * Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101D HF/50MHz 100W Transceiver from DX Engineering. Click 'More Detail' below to see additional information about the FTDX-101D HF/50MHz 100W Transceivers. The 200 watt version, Yaesu FTDX-101MP is displayed separately in the Base Transceivers area. **NOTE: The Yaesu FTDX-101D has the VC Tune Preselector installed in the MAIN receiver and 12 kHz, 3 kHz and 600 Hz roofing filters installed in the MAIN and SUB receivers. A second VC Tune Preselector is optional for the SUB receiver and four optional roofing filters, 300 Hz and 1.2 kHz for the MAIN and SUB, are available only by transceiver special order. Installation and calibration are done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101D shipped from stock cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom built FTDX-101D.
( 53 )
$4,049.99
$3,999.95
On Sale
ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers
If you haven't yet heard of the ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers, then we can tell you that ICOM is at it again! IC-7100 transceivers introduce another amateur radio first. The radio control head features a large, multi-function, "touch screen" Dot-Matrix LCD display! This is an important feature because the controller's display not only provides information, but is also your control portal to the IC-7100's feature settings and menus. Breaking the basic rule that a radio faceplate must be vertically flat, the IC-7100's control head is sloped for the optimal viewing angle for the LCD display! The large touch screen also provides ample spacing for big fingers! ICOM even allowed plenty of room to have a large internal speaker, along with a jack for a CW key, a headphones/speaker jack, a microphone jack, and a control cable connection. IC-7100 base/mobile transceivers provide D-STAR (Digital Smart Technology for Amateur Radio) and DV (Digital Voice) mode and low speed data communication on the 2 meter and 70 centimeter bands. The D-STAR DV mode has loads of advantages over the analog FM mode: Digitally modulated clear voice; 950 bps of simultaneous data transfer; D-STAR individual calling using YOUR call sign, and access to the worldwide D-STAR repeater network linked via the Internet, just to name a few. The latest 32-bit floating point DSP (Digital Signal Processing) supports many digital processing features, such as a digital IF filter, twin PBT (Pass-Band Tuning), and manual notch filters. Of course, those high-grade digital processing features work on all ham bands from HF through the 70cm band. When considering a new all-band all-mode D-STAR equipped rig, keep these ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers from DX Engineering in mind! Just look at these features! * All-mode operation: USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) * Digital voice (DV) and data on VHF/UHF D-STAR * All bands 160 meters through 70cm (except 1.25m) * Separate control head with separation cable * Includes tactile tuning dial and direct frequency entry * 2-100W 160 through 6m, 2-50W 2m, 1-35W 70cm * Built-in SD Card Slot for voice storage and data cloning * Dual DSP chips deliver versatile digital processing performance * Built-in RTTY demodulator and decoder * Multi-function meter * SWR graphic display * DSP controller/RF speech compressor * Total of 505 memory channels * Voice recording and playback functions * ± 0.5ppm superior frequency stability * Optional RS-BA1 IP remote control software * ICOM CI-V interface capability Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand microphone * DC power cable * Electronic keyer plug * Spare fuses * Key plug * Accessory cable * Control head separation cable
( 94 )
$1,199.95
$838.95
On Sale
ICOM IC-905 VHF/UHF/SHF All Mode Base/Portable Transceivers
ICOM IC-905 VHF/UHF/SHF All Mode +ATV Base/Portable Transceivers are 10 W QRP 144/430/1200/2400/5600 MHz All Mode +ATV Base/Portable Transceivers that hold the distinction of being the first in the industry to offer the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). The IC-905 offers all common operating modes - SSB and CW, AM/FM, and full D-Star functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz and 0.5W with the optional 10 GHz module.
( 3 )
$3,199.95
$2,699.95