Availability
On Sale
Open Box
Alinco DR-735T VHF/UHF Transceivers
Alinco DR-735T VHF/UHF Transceivers feature eight full color LED backlights that enable you to customize your display colors! DR-735s let you assign different colors for different functions. These "beautifully simple" radios have fully independent VHF/UHF keys and dials to deliver true dual-band operation. The removable front panel can be remotely mounted or inverted for optimal speaker placement. DR-735 features include: * Full-duplex receiver enables simultaneous TX/RX within 144/440MHz bands as well as V/V and U/U receiver capability. Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two monoband radios rather than a dual band transceiver. * Simply press the volume knob to select the VFO you wish to use for transmitting. * Cross-band repeater function available on all DR-735T radios. (Be sure to observe all regulations applicable to cross-band operation.) * Computer programmable with free software from Alinco. * "Set Mode" menus are divided into basic and advanced, allowing you to assign less frequently used modes such as auto power off or busy channel lockout to set and forget. * Large heatsink and quiet fan for stability while operating * Wide and narrow ceramic filters enable true narrow band operation * Two speaker ports located on the back of the unit allow you to separate signals by both right and left sides or by internal or external speakers using audio from a single external source. Additional conveniences include: * Easy repeater access: These radios feature manual shift and offset direction setting plus preset and programmable auto-repeater settings. Includes 4 tone-burst tones * Versatile memory functions: Include 1,000 memory channels in 10 banks, 100 right-only/100 left-only memories, 100 dual memories, 5 pairs of programmed-scan channels, and 2 call channels. * Easy-to-Read Display: Large LCD screen offers adjustable display brightness, color and contrast along with 6-character alphanumeric tags, a brightness timer that boosts light levels temporarily when keys are engaged and a "scan light" feature that increases brightness for two seconds when scanning stops. * Convenient Receiver Functions: Include popular functions such as pager (icon and beep tones), extended receive, aviation and utility monitoring on VHF and UHF frequencies, a variety of selectable channel steps, CTCSS/DCS capabilities for selective monitoring, a 10dB RX attenuator, sub-band mute, reception image rejection and auto-power-off. Advanced Transmitting Features: Valued by many seasoned operators, these features are part of the set mode menu that includes time-out-timer and busy channel lockout as well as an adjustable mid-power output level, microphone gain adjustment and cross-band repeat (T model only)*. Selectable Scan Modes: Choose from a variety of scan modes that include VFO, memory, programmed or priority scans with busy and timed modes, CTCSS/DCS tone detection and memory scans with "skip" and "favorite" settings. (Utility software required for priority scan setting.) Popular Features: Other popular features include single-band mode, a restore function that recalls set-mode settings even after a complete reset, five different reset modes (system, complete, VFO, memory and color resets), cable-cloning and utility software. Note: For additional information, please look at the files under the "Documentation" tab. Included equipment: * Microphone: EMS-79 DTMF (standard on "T" version) * DC power cable: UA38Y * Bracket Hardware Pack: ADFM78 Optional equipment: * Digital modulation unit: EJ-47U * Control head separation kit: EDS-30 * 8-pin microphone adapter: EDS-8 * USB Computer interface cable: ERW-7 Are you looking for a great dual-bander? Look no farther than one of these Alinco DR-735 VHF/UHF Transceivers from DX Engineering!
( 39 )
$329.95
On Sale
Clearance
Open Box
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,898.95
$3,704.00
Open Box
Yaesu Headsets and Earpiece-Lapel Microphones
Yaesu Headsets and Earpiece-Lapel Microphones bring HT audio convenience from your belt to your ear and collar. Featuring specialized connectors on coiled cords with swivel clips, light-touch PTT switches and privacy listening earphone, these mics are a must when you need to use your handheld for extended period of time without disturbing others. The convenience of talking and hearing quickly and easily without pulling the HT off of your belt cannot be beat! Get your Yaesu Headsets and Earpiece-Lapel Microphones right here at DX Engineering.
( 15 )
$80.74
Clearance
Open Box
ELAD FDM-S3 SDR Receivers
ELAD FDM-S3 SDR Receivers are outstanding Software Defined Radios with impressive performance features. The Italian manufacturer, ELAD, has pushed the boundaries of modern SDR design with this model. For instance, the FDM-S3 offers an incredible 24 MHz bandwidth that can be scanned simultaneously, allowing up to four receivers to operate at the same time—a feature typically reserved for much more expensive receivers. The FDM-S3 functions as a direct sampling SDR with a variable sampling rate of up to 122.8 MHz. It covers a reception range from 9 kHz to 108 MHz, with an optional downconverter available for even higher frequencies. One of the unique aspects of the FDM-S3 is its variable sampling rate, which ranges from 98 to 122 MHz depending on the band. This flexibility allows for more favorable divider ratios for down-sampling, enhancing sensitivity and dynamic range.
( 1 )
$1,015.99
$965.19
Clearance
Open Box
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers feature an integrated antenna tuner (ATU), and the latest direct sampling SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. The integrated automatic antenna tuner (ATU) is designed to match antennas with up to 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.
( 2 )
$3,999.00
$3,799.05
Clearance
Open Box
FlexRadio 8400ATU Signature Series HF/6-Meter SDR Transceivers
FlexRadio 8400ATU Signature Series SDR Transceivers offer the latest in high-performance, direct sampling software-defined radio (SDR) technology designed for the HF and 6-meter amateur bands. Designed for hams who operate exclusively via remote access, the FLEX-8400 is engineered as a server-based SDR transceiver. It supports SmartSDR clients on Windows, Mac, iOS, and Maestro, allowing seamless control from virtually anywhere. With dual independent receivers and full duplex cross-band capability, it's ideal for DXing, contesting, and digital modes—no external sound cards or interfaces required. The integrated automatic antenna tuner (ATU) is designed to match antennas with up to 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters. Using a PC, laptop, or Mac client, the FLEX-8400 supports up to two 7 MHz spectrum/waterfall displays and independent receivers, providing enhanced band visibility. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external interfaces required. The radio delivers advanced band awareness, low phase noise, brick wall filters, and high-quality audio performance to support a wide range of operating styles.
( 2 )
$2,849.00
$2,706.55