Availability
Transceivers and Receivers
Icom IC-7300MK2 HF/50MHz Base Transceivers
Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities
( 32 )
$1,499.95
Instant Rebate
Manufacturer Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,399.95
Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers
Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers are the latest generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. FT-991A transceivers include multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50 MHz capability (50 Watts VHF/UHF). These superior-performance transceivers include a high-resolution full-color 3.5 in. TFT touch panel for exceptional operability and visibility. This "A" version of the FT-991 also includes two new exciting and useful advanced features - a Real-Time Spectrum Scope and a Multi-Color Waterfall Display. The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio, allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the Multi-Color Waterfall Display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope. FT 991As feature a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point DSP from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands. The 1st IF frequency incorporates selectable robust 3 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. These FT-991A transceivers could not provide functions easier than at your fingertips with their 3.5 in. full color TFT display for superior operability and visibility. These rigs can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an optional SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, and Shift). The RF amplifier in FT-991A transceivers provides a clean and solid 100 Watts of power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating. These radios are a compact, lightweight chassis suitable for portable, mobile and base installations. Measuring 8.8 W x 3 H x 9.9 in. deep at just 9.7 pounds, this robust full-featured mobile/portable radio is ready to go when and where you are! The integral internal high-speed Automatic Antenna Tuner included in the transceiver uses an LC switching network that has a large-capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency. A plus/minus 0.5ppm High Resolution DDS/PLL Local Oscillator included as part of the standard radio package. Yaesu FT-991A Transceiver Specifications: * Frequency Ranges: RX 30 kHz - 56 MHz, 118 MHz - 164 MHz, 420 MHz - 470 MHz (specified performance, amateur bands only) * TX 1.8 MHz - 54 MHz, 144 MHz - 148 MHz, 430 MHz - 450 MHz (amateur bands only) * Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM * Double-Conversion Superheterodyne: FM/C4FM * Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM), F1D(PACKET), F2D(PACKET) * Power Output: SSB/CW/FM - AM Carrier * 160 - 6 Meters: 100 - 25 W * 2 Meters/70 Centimeters: 50 - 12.5 W * Weight: 9.5 lbs. * Yaesu Warranty: 3 Years Supplied Accessories * Hand Microphone (MH-31A8J) * DC Power Cord * Spare Fuse (25A) * Operating Manual * Warranty Card Please view the Yaesu information for this product by clicking on the "Documentation" tab. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers from DX Engineering!
( 233 )
$1,449.95
Kenwood TM-D750A Tri-Band Digital Mobile Transceivers
Kenwood TM-D750A Tri-Band Digital Mobile Transceivers set a new standard for Amateur Radio operators seeking advanced digital communications, integrated navigation capabilities, and exceptional ease of use in a modern tri-band mobile transceiver. Covering the 2 meter (144-148 MHz), 1.25 meter (222-225 MHz), and 70 centimeter (420-450 MHz) amateur bands, the TM-D750A combines powerful RF performance with a feature-rich operating platform designed for voice, data, APRS®, and D-STAR® communications. At the heart of the TM-D750A is a bright, high-resolution 3.45-inch TFT color LCD that delivers exceptional clarity, vibrant color, and wide viewing angles. Enhancing situational awareness, the radio features Visual Scan with Waterfall, displaying scan history and signal activity in a vivid, easy-to-interpret waterfall format that helps operators quickly identify active frequencies and band conditions. Multiple dedicated knobs and push buttons provide fast, intuitive access to key functions, making it easy to navigate menus, adjust settings, and manage communications whether operating from a vehicle, base station, or the field. Built with connectivity in mind, the TM-D750A features integrated Bluetooth®, Wireless LAN, GPS, and APRS functionality, enabling seamless communication across multiple platforms. Its built-in APRS-compliant TNC supports real-time two-way data communications, making it ideal for position reporting, tactical messaging, event coordination, and emergency communications. The integrated GPS receiver and patch antenna provide accurate location information without the need for external accessories, while the built-in KISS TNC supports packet communications at 1200 and 9600 bps, standalone digipeater operation, and IGate applications when connected to a computer. For operators utilizing digital voice technology, the TM-D750A offers extensive D-STAR® compatibility and network connectivity options. Integrated Wireless LAN allows direct access to D-STAR networks through Direct Mode without requiring additional hardware. The transceiver also supports Reflector Terminal Mode, enabling convenient access to D-STAR reflectors through a Windows® PC or Android™ device using either a USB or Bluetooth connection. With simultaneous reception capability, operators can monitor and receive both voice and data communications at the same time, expanding operational awareness and communication flexibility. The transceiver's thoughtfully engineered layout includes a remote control head with a built-in speaker, offering versatile installation options without sacrificing audio performance. Renowned KENWOOD audio quality ensures crisp, natural-sounding receive audio, while a comprehensive voice guidance system featuring more than 900 voice phrases and four selectable speech speeds enhances accessibility and operating convenience. Modern connectivity is further enhanced with USB-C ports for straightforward programming, firmware updates, and data communications. Additionally, dual microSD card slots, located on both the remote control head and RF deck, provide expanded storage for configuration data, operational logs, and future functionality. Whether you're coordinating APRS activities, accessing D-STAR networks, operating packet radio, or simply seeking a highly capable tri-band mobile transceiver, the Kenwood TM-D750A delivers an impressive combination of advanced digital technology, reliable performance, and user-focused design for today's demanding Amateur Radio operator.
( 4 )
$1,199.95
ICOM CX-10G 10 GHz Transverters
ICOM CX-10G 10 GHz Transverters are high-performance RF transmit and receive converters designed for amateur radio SHF enthusiasts and radio experimenters. Fully compatible with ICOM IC-905, the CX-10G Transverter converts 2.4 GHz IF signals to the 10 GHz band, opening a new range of frequencies for experimentation and communication. The CX-10G compact and lightweight unit that connects directly to, and is powered by the IC-905 RF Unit. This 0.5-watt output 10 GHz Transverter is also fully IPX5 waterproof for tower or tripod mounting at the antenna to limit cable loss. It features a built-in preamplifier and uses the RF Unit GPS signal for an ultra-stable local oscillator, ensuring excellent sensitivity and signal stability. A variety of protection circuits are built-in to prevent damage from overvoltage, overcurrent, and overheating. These transverters also include a range of useful features such as adjustable output power, a low noise figure and a built-in cooling fan to keep the unit operating smoothly even during extended use. Whether you are a seasoned SHF experimenter or a curious operator looking to explore the 10 GHz band, the Icom CX-10G 10 GHz Transverter is a powerful and reliable tool that is sure to impress. Along with the Icom IC-905, this transverter unit makes it easy to try the 10 GHz band and take your operations to the next level.
( 1 )
$1,199.95
Perseus SDR Receiver
ELAD PERSEUS SDR Receiver is a VLF through HF 10 kHz – 30 MHz receiver based on an exceptional direct sampling digital architecture. The well-established Perseus features a 14-bit 80 MS/s analog-to-digital converter, a high-performance FPGA-based digital down converter and a 480 Mbit/s high-speed USB 2.0 PC interface. Being an SDR device, PERSEUS relies on software applications to perform the demodulation process. The software, in addition to providing digital signal processing capabilities, has a simple graphical user interface (GUI). Integration with third-party software is provided in various ways, through the Microtelecom Software Defined Radio Developer Kit, virtual audio ports and virtual communication ports. Microtelecom PERSEUS is an ideal SDR RECEIVER for SWLs, featuring a high level of reception from 10 kHz to 30 MHz, with exceptional bandwidth monitoring capabilities. The analog front end has been carefully designed for the most demanding users and includes a 0-30 dB attenuator in 10 dB steps, a 10-band preselector and a high-dynamics preamp with a top-of-the-range cut-off point that exceeds 30 dBm. The resulting dynamics are greater than 100dB in SSB and 105dB in CW. The PERSEUS receiver can also be used in broadband mode as a spectrum analyzer with a 10 kHz - 40 MHz band and a dynamic range of over 100dB. SUPPLIED ACCESSORIES: - 5V power supply with interchangeable AC blades (SMI6-5-V-P6 or SMI6B-5-4P6R). - USB stick with software v5 with license, manuals. - USB 2.0 A-B type cable - BNC to UHF F (SO-239) adapter
( 1 )
$1,149.99
ELAD FDM-DUO SDR Transceivers
ELAD FDM-DUO SDR Transceivers are versatile SDR QRP transceivers with a 5W output that can operate independently without a PC. This compact device incorporates the latest SDR technology, featuring a fast analog-digital converter that directly samples the received HF signals into digital form. A downstream DSP module handles filtering and processing, while an ARM processor manages the control unit signals.
( 3 )
$1,329.99
—
$1,372.99
ELAD FDM-S3 SDR Receivers
ELAD FDM-S3 SDR Receivers are outstanding Software Defined Radios with impressive performance features. The Italian manufacturer, ELAD, has pushed the boundaries of modern SDR design with this model. For instance, the FDM-S3 offers an incredible 24 MHz bandwidth that can be scanned simultaneously, allowing up to four receivers to operate at the same time—a feature typically reserved for much more expensive receivers. The FDM-S3 functions as a direct sampling SDR with a variable sampling rate of up to 122.8 MHz. It covers a reception range from 9 kHz to 108 MHz, with an optional downconverter available for even higher frequencies. One of the unique aspects of the FDM-S3 is its variable sampling rate, which ranges from 98 to 122 MHz depending on the band. This flexibility allows for more favorable divider ratios for down-sampling, enhancing sensitivity and dynamic range.
( 1 )
$1,015.99
ELAD FDM-DUO-R SDR Receivers
ELAD FDM-DUO-R SDR Receivers showcase ELAD's renowned sleek Italian design and cutting-edge technology. Following the great success of the FDM-DUO transceiver, ELAD has introduced the FDM-DUO-R receiver. The FDM-DUO-R is a shortwave receiver that utilizes state-of-the-art SDR technology that can be operated like a traditional radio. It includes familiar controls such as a large VFO knob, dials for volume and filters, and pushbuttons for frequently used settings, making it as user-friendly as a classic receiver. Its advanced internal components, including a fast AD converter and powerful digital processing capabilities, ensure excellent reception, like the FDM-S2 and FDM-DUO.
( 1 )
$1,043.99
Manufacturer Rebate
ICOM IC-7300 HF Plus 50 MHz Transceivers
ICOM IC-7300 HF Plus 50 MHz Transceivers employ a new-technology real-time touch-screen spectrum scope that leads its class in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to another signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune to the desired signal. The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of IC-7300 radios and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the real-time spectrum scope. The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either transmit or receive audio may be displayed on the FFT scope, with the waterfall function and the oscilloscope. The large 4.3 in. color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents. IC-7300 transceivers employ an RF direct-sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading-edge technology; creating a new era in amateur radio. The new "IP-plus" function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. IC-7300 transceivers' RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals. IC-7300's have 15 discrete RF band-pass filters. The RF signal is passed through only one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters. The built-in antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. NOTE: Do not use the Enforced Tuning function except in case of an emergency. Transmitter output power may be automatically reduced. IC-7300 transceivers can store various contents into an SD card, such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Updated personal and firmware data can also be stored to the SD card for easy setting. To offer superior sound quality, a new speaker unit has been incorporated and is designed into the aluminum die-cast chassis; not just squeezed in as a necessity. Other IC-7300 features include: * HM-219 hand microphone supplied * Large, effective cooling fan system * Multi-function meter * 101 memory channels (99 regular, plus 2 scan edges) * Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed) * CW functions: Full break-in, CW reverse, CW auto tuning Note: For additional information, look at the files under the "Documentation" tab. The innovative features included in ICOM's IC-7300 offer tremendous advantages and represent a paradigm shift for its modest price point. ICOM says of its 7300 that "The Real HF Fun Starts Here." Order one of their ICOM IC-7300 HF Plus 50 MHz Transceivers and discover the fun to be had with leading-edge technology transceivers from DX Engineering!
( 553 )
$1,039.95
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 167 )
$1,499.95
Instant Rebate
Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
The magnificent new Yaesu FT-710 AESS HF/50 MHz SDR Transceivers represent the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack. The FT-710 AESS model includes the Acoustic Enhancement Speaker System (AESS) and features a large 4.3 inch, high-resolution TFT color multi-function touchscreen display which yields intuitive management of system settings and functions. Large control dials and the ergonomically designed layout of the front panel make the FT-710 easy to navigate. The real-time spectrum scope display adopts the FTDX series SDR 3D scope 3DSS (3 Dimensional Spectrum Stream)[RE1] to visualize changes in signal strengths within the bands.
( 84 )
$1,099.95