Filters
5 Results Found For "noise"
Icom IC-7300MK2 HF/50MHz Base Transceivers
Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities
( 31 )
$1,499.95
Instant Rebate
Manufacturer Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,399.95
ICOM CX-10G 10 GHz Transverters
ICOM CX-10G 10 GHz Transverters are high-performance RF transmit and receive converters designed for amateur radio SHF enthusiasts and radio experimenters. Fully compatible with ICOM IC-905, the CX-10G Transverter converts 2.4 GHz IF signals to the 10 GHz band, opening a new range of frequencies for experimentation and communication. The CX-10G compact and lightweight unit that connects directly to, and is powered by the IC-905 RF Unit. This 0.5-watt output 10 GHz Transverter is also fully IPX5 waterproof for tower or tripod mounting at the antenna to limit cable loss. It features a built-in preamplifier and uses the RF Unit GPS signal for an ultra-stable local oscillator, ensuring excellent sensitivity and signal stability. A variety of protection circuits are built-in to prevent damage from overvoltage, overcurrent, and overheating. These transverters also include a range of useful features such as adjustable output power, a low noise figure and a built-in cooling fan to keep the unit operating smoothly even during extended use. Whether you are a seasoned SHF experimenter or a curious operator looking to explore the 10 GHz band, the Icom CX-10G 10 GHz Transverter is a powerful and reliable tool that is sure to impress. Along with the Icom IC-905, this transverter unit makes it easy to try the 10 GHz band and take your operations to the next level.
( 1 )
$1,199.95
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 166 )
$1,499.95
Manufacturer Rebate
ICOM IC-7300 HF Plus 50 MHz Transceivers
ICOM IC-7300 HF Plus 50 MHz Transceivers employ a new-technology real-time touch-screen spectrum scope that leads its class in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to another signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune to the desired signal. The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of IC-7300 radios and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the real-time spectrum scope. The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either transmit or receive audio may be displayed on the FFT scope, with the waterfall function and the oscilloscope. The large 4.3 in. color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents. IC-7300 transceivers employ an RF direct-sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading-edge technology; creating a new era in amateur radio. The new "IP-plus" function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. IC-7300 transceivers' RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals. IC-7300's have 15 discrete RF band-pass filters. The RF signal is passed through only one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters. The built-in antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. NOTE: Do not use the Enforced Tuning function except in case of an emergency. Transmitter output power may be automatically reduced. IC-7300 transceivers can store various contents into an SD card, such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Updated personal and firmware data can also be stored to the SD card for easy setting. To offer superior sound quality, a new speaker unit has been incorporated and is designed into the aluminum die-cast chassis; not just squeezed in as a necessity. Other IC-7300 features include: * HM-219 hand microphone supplied * Large, effective cooling fan system * Multi-function meter * 101 memory channels (99 regular, plus 2 scan edges) * Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed) * CW functions: Full break-in, CW reverse, CW auto tuning Note: For additional information, look at the files under the "Documentation" tab. The innovative features included in ICOM's IC-7300 offer tremendous advantages and represent a paradigm shift for its modest price point. ICOM says of its 7300 that "The Real HF Fun Starts Here." Order one of their ICOM IC-7300 HF Plus 50 MHz Transceivers and discover the fun to be had with leading-edge technology transceivers from DX Engineering!
( 553 )
$1,039.95