Availability
5 Results Found For "d star"
ICOM D-STAR Third Generation Repeaters
ICOM D-STAR Third Generation Repeaters support analog, D-STAR and a mixed mode configuration. While analog operation is for local communications, combine the D-STAR mode with the ID-RP3 G3 software to join the D-STAR Global network. In addition to mixed mode functionality, the G3 hardware combines the D-STAR repeater controller and RF module into one 2U rack mount unit. Model, Output Power, Frequencies, Modes: ID-RP2010V, 25W, 144-148 MHz, DV/FM; ID-RP4010V, 25W, 440-450 MHz, DV/FM; ID-RP1200VD, 10W, 1240-1300 MHz, DV/DD*/FM An integrated controller is built onto the repeater to function with the RF module unit. Additionally, each repeater can act independently to relay receive signals. Connect the repeaters with the supplied Ethernet cable for cross-band operation. The repeater's RF module in the repeater can operate as a single band D-STAR/FM repeater; the ID-RP2C is not required. *The ID-RP1200VD is a 1.2 GHz repeater that is switchable between DV or DD mode. DD mode operation acts as a wireless modem through a computer's Ethernet port to provide data communication and internet access up to 128 kbps. Use the IC-9700's 1.2 GHz DD mode to set it up as a wireless modem. Key Features of the D-Star Third Generation Repeaters: - LTE capable, suitable for emergency deployments - RF direct sampling and FPGA platform - Compatible with the external ID-RP2C repeater controller - SD card slot for firmware updates save setting data, FM mode, and Voice ID audio Connect the optional LTE unit, UX-262 to directly connect an LTE network and the internet. One LTE network can be shared with multiple repeater modules on one site. A data SIM card provides network coverage. A static Global IP address is required for the internet SIM. Combining the internal Gateway function and the LTE unit can make a deployable provisional D-STAR repeater site for emergency situations.** ** Please check the legal requirements before using the provisional repeater site The IDRP2010V/RP4010V repeater uses the latest RF Direct Sampling method. The ID-RP1200VD uses a 1.2GHz, Down Conversion IF sampling. This means when the signals are processed in the FPGA, it greatly improves the receiver's sensitivity. Other Features: - High duty cycle operation - Replace a repeater module in the ID-RP2 series D-STAR repeaters, as the new modules are compatible with the ID-RP2C controller - CW ID/Voice ID transmitter - SD card slot for firmware updates, save setting data, FM mode, and Voice ID audio - Each RF module has a 10 MHz reference signal input - Each RF module has an internal controller providing CTCSS, DTCS codes, 1750 Hz tone and CW/Voice ID programmable for analog FM mode Supplied Accessories: - DC power cable (3m, 9.8 ft.) - Fuses - Ethernet cable (0.6m, 2.0 ft.) - Rubber stands - USB cable (1M, 3.2 ft.) - Allen wrench More information is available from the Icom America website. Order ICOM D-STAR Third Generation Repeaters from DX Engineering.
Not Yet Reviewed
$2,688.99
Manufacturer Rebate
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 126 )
$2,099.95
On Sale
ICOM IC-905 VHF/UHF/SHF All Mode Base/Portable Transceivers
ICOM IC-905 VHF/UHF/SHF All Mode +ATV Base/Portable Transceivers are 10 W QRP 144/430/1200/2400/5600 MHz All Mode +ATV Base/Portable Transceivers that hold the distinction of being the first in the industry to offer the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). The IC-905 offers all common operating modes - SSB and CW, AM/FM, and full D-Star functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz and 0.5W with the optional 10 GHz module.
( 3 )
$3,199.95
$2,699.95
ICOM IC-R8600 Communications Receivers
ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!
( 16 )
$2,799.95
—
$3,249.95
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters
Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters are digital / conventional FM dual mode repeaters with Dual Receive / Dual Transmit (DTDR) capabilities. Easy Migration… The repeater controller, receiver and transmitter are all packaged into a standard 19 in. rack mount unit for simple replacement of an existing repeater. Existing peripheral devices such as duplexer and amplifier, etc., can continue to be used as-is. DR-2X Features: * Modulation Modes: Conventional FM, 12.5 kHz C4FM Digital (V/D Mode, VFR Mode, DFR Mode) * VHF or UHF operation (cross-band capable) / DRDT * AMS (Automatic Mode Select) automatically recognizes C4FM digital or conventional FM, and the DR-2X re-transmits using the preset communications mode * 3.5 in. full-color touch panel operation * Extremely reliable, high RF output power: 50W/20W/10W * Emergency Operation: Supports auto-switched backup battery * Front panel microphone connector is provided for repeater testing, and as a base station * Built-in monitor speaker with volume control * Full compatibility with existing repeater controllers using the 15-pin I/O * MSRL (Multi-site repeater link) for easy coverage expansion using optional module * New and improved "News Station" feature for easy sharing of voice and text messaging * Enhanced Group Monitor feature for Easy Grouping Set-up (DG-ID, DP-ID) * NOTE: System Fusion is NOT compatible with D-STAR GMSK User-Friendly Setup: The large front panel, color touch screen permits convenient configuration of the transmitter and receiver frequencies, CTCSS tones, squelch, transmit power output and AMS functions. Simply turn the display switch ON and use the touch panel screen to confirm or change settings. Enhanced Group Monitor: Yaesu's Group Monitor feature allows you to track multiple resources quickly by displaying telemetry and signal strength information of other group members that share the same Digital Group Identification number. Optional MSRL (Multi-site Repeater Link): MSRL allows the repeater operator to link multiple repeaters over a Wide-Area-Network (WAN) or Local-Area-Network (LAN) across short or long distances. New and Improved News Station Function: Quickly store and retrieve digital audio and text messages for groups or individual operators that can be accessed on demand, any time of the day (* Requires Optional MSRL module). Other Features: * Internal AC Power Supply * High Stability plus/minus 2.5ppm TCXO included * DSQ (Digital Squelch Code) Signaling feature * CTCSS and DCS Signaling feature * ID Announcement feature * Remote/External Controller Interface * Base Station Operation * Firmware Upgradeable DR-2X Supplied Accessories: * AC Cable * DC Cable for backup battery * PC Connection cable SCU-20 * Rubber feet (4) DR-2X Options: * DTMF Microphone MH-48A6JA * Hand Microphone MH-42C6J * Voice Guide Unit FVS-2 DR-2X partial specifications: * 144 to 148 MHz, 430 to 450 MHz * Channel steps 5 / 6.25 kHz * Emission type F1D, F2D, F3E, F7W * Frequency stability plus/minus 2.5 ppm (-4F to +140F / -20C to +60C) * Antenna impedance 50 ohms * Supply Voltage AC 100 to 240 V * DC 11.7 to 15.8 V, negative ground * Weight: 22.05 lbs. (10 kg) approximately Transmitter: * RF power output 50/20/5 W * Modulation type F1D, F2D, F3E Variable Reactance Modulation * F7W 4FSK (C4FM) Receiver: * Double conversion Superheterodyne * Audio output 4 W (4 ohms, 10 percent THD, 13.8 V; internal speaker) Current consumption: * 1.5 A (Receive) * 13 A (50 W TX, 144 MHz band) * 14 A (50 W TX, 430 MHz band) Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Move your repeaters into the future! Install Yaesu DR-2X 144/430 Dual Band Dual Mode C4FM/FM Analog/Digital Repeaters from DX Engineering.
( 3 )
$2,099.99
—
$2,584.99