Availability
Transceivers and Receivers
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceivers
The Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceiver is a flagship Icom dual-band transceiver designed for operators who demand advanced functionality, exceptional visibility, and intuitive control. Featuring a large 4.3-inch full-color touchscreen display, the same used in the IC-705 and IC-7300MKII, independent dual-band tuning, volume, and squelch controls, and the industry's first mobile transceiver waterfall display, the ID-5200A allows operators to monitor signal activity, band conditions, and frequency availability with remarkable clarity. True dual-band simultaneous reception supports FM/FM, FM/DV, and DV/DV operation, enabling users to monitor two D-STAR repeaters simultaneously or follow multiple communications at the same time. Enhanced D-STAR capabilities include Terminal Mode, Access Point Mode, DV Repeater Monitor, and image transmission and reception, while built-in Wi-Fi® and Bluetooth® connectivity provide seamless integration with smartphones, PCs, and internet-based operation. Additional features such as the Memory Scope function, microSD card support, automatic display brightness adjustment, Airband reception, USB Type-C connectivity, and planned APRS® support via future firmware updates make the ID-5200A a versatile and future-ready mobile transceiver. Flexible mounting options, including vehicle brackets, desktop stands, AMPS-pattern mounting compatibility, and tripod mounting support, allow users to install the radio in virtually any operating environment with ease. Important: Specifications and features are based on pre-release manufacturer information and are subject to change without notice. Final product specifications may vary from those shown.
Not Yet Reviewed
$999.95
On Sale
ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers
If you haven't yet heard of the ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers, then we can tell you that ICOM is at it again! IC-7100 transceivers introduce another amateur radio first. The radio control head features a large, multi-function, "touch screen" Dot-Matrix LCD display! This is an important feature because the controller's display not only provides information, but is also your control portal to the IC-7100's feature settings and menus. Breaking the basic rule that a radio faceplate must be vertically flat, the IC-7100's control head is sloped for the optimal viewing angle for the LCD display! The large touch screen also provides ample spacing for big fingers! ICOM even allowed plenty of room to have a large internal speaker, along with a jack for a CW key, a headphones/speaker jack, a microphone jack, and a control cable connection. IC-7100 base/mobile transceivers provide D-STAR (Digital Smart Technology for Amateur Radio) and DV (Digital Voice) mode and low speed data communication on the 2 meter and 70 centimeter bands. The D-STAR DV mode has loads of advantages over the analog FM mode: Digitally modulated clear voice; 950 bps of simultaneous data transfer; D-STAR individual calling using YOUR call sign, and access to the worldwide D-STAR repeater network linked via the Internet, just to name a few. The latest 32-bit floating point DSP (Digital Signal Processing) supports many digital processing features, such as a digital IF filter, twin PBT (Pass-Band Tuning), and manual notch filters. Of course, those high-grade digital processing features work on all ham bands from HF through the 70cm band. When considering a new all-band all-mode D-STAR equipped rig, keep these ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers from DX Engineering in mind! Just look at these features! * All-mode operation: USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) * Digital voice (DV) and data on VHF/UHF D-STAR * All bands 160 meters through 70cm (except 1.25m) * Separate control head with separation cable * Includes tactile tuning dial and direct frequency entry * 2-100W 160 through 6m, 2-50W 2m, 1-35W 70cm * Built-in SD Card Slot for voice storage and data cloning * Dual DSP chips deliver versatile digital processing performance * Built-in RTTY demodulator and decoder * Multi-function meter * SWR graphic display * DSP controller/RF speech compressor * Total of 505 memory channels * Voice recording and playback functions * ± 0.5ppm superior frequency stability * Optional RS-BA1 IP remote control software * ICOM CI-V interface capability Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand microphone * DC power cable * Electronic keyer plug * Spare fuses * Key plug * Accessory cable * Control head separation cable
( 94 )
$1,199.95
$838.95
Clearance
Open Box
ELAD FDM-S3 SDR Receivers
ELAD FDM-S3 SDR Receivers are outstanding Software Defined Radios with impressive performance features. The Italian manufacturer, ELAD, has pushed the boundaries of modern SDR design with this model. For instance, the FDM-S3 offers an incredible 24 MHz bandwidth that can be scanned simultaneously, allowing up to four receivers to operate at the same time—a feature typically reserved for much more expensive receivers. The FDM-S3 functions as a direct sampling SDR with a variable sampling rate of up to 122.8 MHz. It covers a reception range from 9 kHz to 108 MHz, with an optional downconverter available for even higher frequencies. One of the unique aspects of the FDM-S3 is its variable sampling rate, which ranges from 98 to 122 MHz depending on the band. This flexibility allows for more favorable divider ratios for down-sampling, enhancing sensitivity and dynamic range.
( 1 )
$1,015.99
$965.19