HAM Radio Transceivers & Receivers

Icom IC-7300MK2 HF/50MHz Base Transceivers

Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities

4.84 out of 5 stars ( 32 )

$1,499.95

FlexRadio Aurora 500W HF+6M SDR Transceivers

FlexRadio AURORA™ SERIES is an all-new family of HF + 6M transceivers featuring the world's first truly integrated 500 watt SDR transmitter. The Aurora Series defines a new category in amateur radio, eliminating the traditional boundaries between transceiver, amplifier, tuner, and power supply. Designed for the modern operator, the Aurora Series delivers exceptional RF performance in a radically compact form factor—leveraging cutting-edge high-efficiency technology that produces more power with less weight, lower heat, and dramatically reduced power input requirements. Aurora Series transceivers are network ready, designed for remote access with SmartSDR clients on any Windows, macOS, iPad®, iPhone®, or Maestro™ device, in your shack, easy chair, or from virtually anywhere in the world! All four Aurora versions offer full coverage reception of 30 kHz to 54 MHz in real time for complete visibility and control across the bands. The AU-510/510M has a single SCU (Spectral Capture Unit) that digitizes the RF spectrum for signal processing and display, supporting up to 2 slice receivers and 2 simultaneous panadapters. AURORA AU-510 & AU-510M Features: • AU-510 Headless Transceiver with Integrated Remote Operation with a Maestro™, iPad®, iPhone® or PC/Laptop • AU-510M Maestro Front Panel Transceiver with 8-Inch 1920 X 1200 IPS Display and HDMI® external monitor port • 500W PEP HF, 200W 6m operation with 80% nominal efficiency • Integrated AC/DC Power Supply, 80-264VAC, 47-63Hz, PF > 0.94 • All Modes/Amateur Bands 160m-6m • Two Independent Band/Mode Receivers • Full Duplex Cross-Band Operation • One Receive Only Port • One Transverter/Exciter Port • Direct Sampling SDR 122.88Msps, 16 bit • 115 dB 2kHz RMDR • >145 dB Dynamic Range • Built in 500W Antenna Tuner • 10 MHz Reference Input • Integrated GNSS receiver with antenna maintains radio frequency with no adjustments • Optional High-performance GPSDO provides 10MHz output for external equipment The AU-520/520M features two independent SCUs, each capable of digitizing wide portions of the 30 kHz to 54 MHz spectrum simultaneously. This dual-SCU configuration allows for up to 4 slice receivers and 4 independent panadapters, making them a powerful choice for contesting, diversity reception, multi-band monitoring, and advanced digital operation. AURORA AU-520 & AU-520M FEATURES: • AU-520 Headless Transceiver with Integrated Remote Operation with a Maestro™, iPad®, iPhone® or PC/Laptop • AU-520M Maestro Front Panel Transceiver with 8-Inch 1920 X 1200 IPS Display and HDMI® external monitor port • 500W PEP HF, 200W 6m operation with 80% nominal efficiency • Integrated AC/DC Power Supply, 80-264VAC, 47-63Hz, PF > 0.94 • All Modes/Amateur Bands 160m-6m • Integrated Remote Operation with a Maestro™, iPad®, iPhone® or PC/Laptop • Four Independent Band/Mode Receivers • Full Duplex Cross-Band Operation • True Diversity Reception • Two Receive Only Ports • Two Transverter/Exciter Ports • Integrated SO2R Solution (OTRSP) Support in one radio • Contest Band Filters: >50dB Rejection band-to-band • Direct Sampling SDR 245.76Msps, 16 bit • 115 dB 2kHz RMDR • >155 dB Dynamic Range • Built in 500W Antenna Tuner • 10 MHz Reference Input • Integrated GNSS receiver with antenna maintains radio frequency with no adjustments • Optional High-performance GPSDO provides 10MHz output for external equipment

3.67 out of 5 stars ( 3 )

$6,199.00

—

$9,599.00

Manufacturer Rebate

ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver

ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.

4.73 out of 5 stars ( 127 )

$2,099.95

Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceivers

The Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceiver is a flagship Icom dual-band transceiver designed for operators who demand advanced functionality, exceptional visibility, and intuitive control. Featuring a large 4.3-inch full-color touchscreen display, the same used in the IC-705 and IC-7300MKII, independent dual-band tuning, volume, and squelch controls, and the industry's first mobile transceiver waterfall display, the ID-5200A allows operators to monitor signal activity, band conditions, and frequency availability with remarkable clarity. True dual-band simultaneous reception supports FM/FM, FM/DV, and DV/DV operation, enabling users to monitor two D-STAR repeaters simultaneously or follow multiple communications at the same time. Enhanced D-STAR capabilities include Terminal Mode, Access Point Mode, DV Repeater Monitor, and image transmission and reception, while built-in Wi-Fi® and Bluetooth® connectivity provide seamless integration with smartphones, PCs, and internet-based operation. Additional features such as the Memory Scope function, microSD card support, automatic display brightness adjustment, Airband reception, USB Type-C connectivity, and planned APRS® support via future firmware updates make the ID-5200A a versatile and future-ready mobile transceiver. Flexible mounting options, including vehicle brackets, desktop stands, AMPS-pattern mounting compatibility, and tripod mounting support, allow users to install the radio in virtually any operating environment with ease. Important: Specifications and features are based on pre-release manufacturer information and are subject to change without notice. Final product specifications may vary from those shown.

4.33 out of 5 stars ( 3 )

$999.95

Manufacturer Rebate

ICOM IC-7760 HF/50MHz All Mode Base Transceivers

ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!

4.2 out of 5 stars ( 10 )

$6,999.95

FlexRadio 8600 HF/6-Meter Signature Series SDR Transceivers

FlexRadio 8600 HF/6-Meter Signature Series SDR Transceivers deliver top-tier performance using direct sampling SDR technology, making it an ideal choice for serious HF and 6-meter operators. Designed for remote operation, the FLEX-8600 functions exclusively as a server, accessible via PC, laptop, Maestro, Mac*, or iOS* clients—locally or remotely. This model supports Adaptive Predistortion and includes a built-in antenna tuner, 10 MHz reference input, and an integrated GPS receiver with antenna to maintain frequency stability without manual adjustment. An optional GPSDO module is available for ultra-high frequency precision and accuracy. (sold separately) The FLEX-8600 features direct sampling SDR at 245.76 Msps with 16-bit resolution, achieving 115 dB RMDR at 2 kHz and >155 dB dynamic range. It supports 100W PEP HF-6m operation across all modes and bands, with contest-grade band filters offering >50 dB rejection for superior signal isolation. Operators can utilize four independent 14 MHz spectrum/waterfall displays and four independent band/mode receivers, offering game-changing band awareness. The transceiver supports full duplex cross-band operation on two antennas, allowing simultaneous transmit and receive on different bands without external equipment. It also enables true diversity reception to improve weak signal detection in high interference environments. Additional connectivity includes two receive-only ports and two transverter/exciter ports, which can also serve as receive antenna inputs. The FLEX-8600 provides an economical SO2R solution with OTSPR support, enabling a complete legal-limit, all-mode SO2R station when paired with the Power Genius XL LDMOS solid-state amplifier—requiring only one radio, one amp, and three cables. (amp and cable sold separately) FlexRadio's SmartSDR™ software ensures compatibility across the entire FLEX-8000 series and supports continuous software enhancements. With SmartLink™ technology, users can access their radio from anywhere using any SmartSDR-compatible client with just a login and password—even from an iPhone.

Not Yet Reviewed

$4,899.00

Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers

Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers take a significant leap forward with cutting-edge features designed to enhance the user experience for Amateur Radio operators. Building on the success of its predecessor, the TH-D74, this advanced model boasts simultaneous reception of 2 D-STAR signals, Reflector Terminal Mode for accessing D-Star reflectors, enhanced voice guidance, built-in GPS, digipeater functions, as well as an APRS® Standalone Digipeater. Usability has been prioritized in the design of the TH-D75A, incorporating modern conveniences such as a USB Type-C port for serial communications, audio in/out and battery charging. The inclusion of Bluetooth headset PTT support enhances the hands-free operation of the transceiver. Its fully ergonomic design ensures a comfortable and intuitive user experience that caters to the evolving needs of today's Amateur Radio operators.

4.85 out of 5 stars ( 26 )

$749.95

FlexRadio 8400 Signature Series HF/6-Meter SDR Transceivers

FlexRadio 8400 Signature Series SDR Transceivers offer the latest in high-performance, direct sampling software-defined radio (SDR) technology designed for the HF and 6-meter amateur bands. Designed for hams who operate exclusively via remote access, the FLEX-8400 is engineered as a server-based SDR transceiver. It supports SmartSDR clients on Windows, Mac, iOS, and Maestro, allowing seamless control from virtually anywhere. With dual independent receivers and full duplex cross-band capability, it's ideal for DXing, contesting, and digital modes—no external sound cards or interfaces required. Using a PC, laptop, or Mac client, the FLEX-8400 supports up to two 7 MHz spectrum/waterfall displays and independent receivers, providing enhanced band visibility. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external interfaces required. The radio delivers advanced band awareness, low phase noise, brick wall filters, and high-quality audio performance to support a wide range of operating styles.

4.5 out of 5 stars ( 4 )

$2,499.00

Manufacturer Rebate

ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers

ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging

5.0 out of 5 stars ( 6 )

$749.95

FlexRadio 8600M HF/6-Meter Signature Series SDR Transceivers

FlexRadio 8600M HF/6-Meter Signature Series SDR Transceivers deliver top-tier performance through direct sampling SDR technology. Paired with a high-resolution display and ergonomic controls, the FLEX-8600M is an ideal choice for serious HF and 6-meter operators. It combines all the capabilities of the FLEX-8600 with a vibrant 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive physical controls, offering high-performance SDR functionality in a traditional radio interface. Integrated display support provides unmatched band awareness, while compatibility with external monitors at 1920×1200 resolution enhances spectral visibility for advanced operations. The 8600M supports Adaptive Predistortion and includes a built-in antenna tuner, 10 MHz reference input, and an integrated GPS receiver with antenna to maintain frequency stability without manual adjustment. An optional GPSDO module is available for ultra-high frequency precision and accuracy. (sold separately) The FLEX-8600M features direct sampling SDR at 245.76 Msps with 16-bit resolution, achieving 115 dB RMDR at 2 kHz and >155 dB dynamic range. It supports 100W PEP HF-6m operation across all modes and bands, with contest-grade band filters offering >50 dB rejection for superior signal isolation. Operators can utilize four independent 14 MHz spectrum/waterfall displays and four independent band/mode receivers, offering game-changing band awareness. The transceiver supports full duplex cross-band operation on two antennas, allowing simultaneous transmit and receive on different bands without external equipment. It also enables true diversity reception to improve weak signal detection in high interference environments. Additional connectivity includes two receive-only ports and two transverter/exciter ports, which can also serve as receive antenna inputs. The FLEX-8600M provides an economical SO2R solution with OTSPR support, enabling a complete legal-limit, all-mode SO2R station when paired with the Power Genius XL LDMOS solid-state amplifier—requiring only one radio, one amp, and three cables. (amp and cable sold separately) FlexRadio's SmartSDR™ software ensures compatibility across the entire FLEX-8000 series and supports continuous software enhancements. With SmartLink™ technology, users can access their radio from anywhere using any SmartSDR-compatible client with just a login and password—even from an iPhone.

5.0 out of 5 stars ( 1 )

$5,604.05

—

$5,899.00

ICOM IC-2730A VHF/UHF FM Transceivers

ICOM IC-2730A VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430 MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730A transceivers employ a durable PA module and deliver 50 watts of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730A receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. The display size of ICOM's IC-2730A is 1.5 times larger than ICOM's other comparable models. Frequency display and channel names are larger, and the white backlight provides higher contrast. Here are more ICOM IC-2730A features: * Cross band repeater capability * CS-2730 Free PC programming software downloads * Versatile scanning capability * Squelch delay and squelch attenuator * Sub band auto mute function * Auto repeater function * Auto power off * TX time-out-timer * 16 DTMF auto dial memories * Weather channel receive with weather alert (USA version only) * CI-V remote control capability (through the optional OPC-478UC) Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * HM-207 remote control microphone * Controller cable, OPC-837 * Microphone hanger * DC power cable, OPC-1132 * Spare fuse NOTE: Optional MBA-4 bracket mounts the Control Head to the main unit. These new dual-band FM transceivers have advanced features at a very affordable price. Purchase ICOM IC-2730A VHF/UHF FM Transceivers from DX Engineering for the best in quality and customer service!

4.68 out of 5 stars ( 144 )

$339.95

FlexRadio Maestro Control Consoles

FlexRadio Maestro Control Consoles are an intuitive, plug-and-play control console that allows you to operate any FLEX-6000, FLEX-8000, or Aurora Series transceiver without a traditional PC. Simply connect Maestro directly or via your local area network (LAN) to begin operating. Frequently used controls are placed within easy reach and clearly labeled for efficient, low-motion operation. Less common functions are accessible through the large capacitive touch LCD, which supports intuitive pan, zoom, tune, and menu navigation—like modern smartphones and tablets. CW paddles can also be connected directly for seamless integration. With its compact, lightweight design and minimal wiring, Maestro offers flexible placement anywhere in your shack or home. Maestro ships with Fixed Feet, Power Supply and an Ethernet Cable.

5.0 out of 5 stars ( 1 )

$1,599.00

Manufacturer Rebate

Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers

Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.

4.75 out of 5 stars ( 4 )

$3,999.95

Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs

Yaesu VX-6R 2m/220/70cm FM Heavy-Duty Tri-Band Ultra-Compact FM HTs are ideal for rigorous field use! With wide-band reception, rugged and submersible design and simple keyboard commands, these Yaesu VX-6R Transceivers are loaded with features. As a bonus, these USA-version radios transmit on 222-225 MHz with 1.5 watts output!

4.72 out of 5 stars ( 60 )

$299.99

Anytone AT-D890UV Dual Band VHF/UHF/DMR Handheld Transceivers

Anytone AT-D890UV Dual-Band VHF/UHF/DMR Handheld Transceivers feature built-in Bluetooth, GPS, and APRS capability. They include Air Band AM receive, cross-band repeater mode, and analog scrambler/compander functions. A vibrant 1.77-inch color TFT display provides easy access to 4,000 channels and up to 500,000 digital contacts with AES-256 encryption. These transceivers are powered by a 3100mAh battery with convenient USB-C charging and upgraded 2G memory capacity.

5.0 out of 5 stars ( 2 )

$309.00

Instant Rebate

Yaesu FT-65R 144/430 MHz Dual-Band HTs

Yaesu FT-65R 144/430 MHz Dual-Band HTs are very compact, ruggedly constructed handheld VHF/UHF rigs with three selectable power settings of 5W, 2.5W, or 0.5W. Their big front panel speaker provides a full 1 watt of crisp, clear audio. These units come supplied with a 1950mAh Li-ion battery pack capable of providing over 9 hours of operation. An optional, higher-capacity 2500mAh Li-ion battery is available for over 11.5 hours of operating time. A 2.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Yaesu's newly designed large, white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. Other useful features include: versatile scanning capabilities, such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan; WX Channels with "Severe Weather" Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BCLO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). VOX operation is available with the optional Earpiece Microphone SSM-512B. * Commercial Grade VHF / UHF: FT-65R transceivers are built to commercial grade standards, including their IP54 Rating for Dust and Water protection. MIL-810-C, D and E standards make these radios suitable for operation in the harshest of environments. * Powerful Output: With 5 Watts of reliable RF output power, this radio is sure to be heard. Never miss a call with One Watt of crisp, clear audio output from the oversized front panel speaker. * High Capacity Li-Ion battery: FT-65R transceivers are packaged with a powerful 1950 mAh Li-Ion battery pack, providing the radio with over 9 hours of operating time. Or upgrade to the optional high-capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time, FT-65R transceivers also come packaged with a 3.5-Hour rapid charger. * QRK (Quick Recall Key): Four Dedicated User-programmable Keys serve as shortcut keys to preferred menu options, or use the four dedicated recall keys to easily store and recall desired frequencies. * Versatile Scanning Capabilities: Programmable VFO Scan scans all channels in the desired frequency range; Memory Scan allows scanning of user selectable frequencies; Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert Scan alerts the user when severe weather is approaching. * PC Programmable: These radios are capable of being programmed directly from a PC, making all of the advanced setup features a breeze! Use the optional software and SCU-35 programming cable to make programming a snap. * More advanced features: Tons of advanced features are loaded into this compact radio, including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer), and more. Note: For additional information, please look at the files under the "Documentation" tab. For really versatile dual-band FM operation, consider one of these Yaesu FT-65R 144/430 MHz Dual-Band HTs from DX Engineering!

4.71 out of 5 stars ( 105 )

$119.95

FlexRadio 8400M HF/6-Meter Signature Series SDR Transceivers

SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.

4.8 out of 5 stars ( 5 )

$3,466.55

—

$3,649.00

Instant Rebate

Manufacturer Rebate

ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver

Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands

4.95 out of 5 stars ( 127 )

$1,399.95

Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers

Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers continue Yaesu's legacy for legendary receiver design in a compact package, providing uncompromising performance for both mobile and stationary Amateur Radio use. High end 32-Bit floating-point DSP enhances the operating experience, providing a cleaner, clearer signal and reducing overall operator fatigue—thereby creating a more enjoyable environment for any ham. Uncompromising Receiver Circuit Design Ensures Excellent Performance: * Triple conversion with a 1st IF frequency of 69.450 MHz (SSB/CW/AM * 3 kHz roofing filter equipped as standard feature * TCXO provides plus/minus 0.5ppm high-frequency stability (-10 C to 50 C) * 3-Year manufacturer warranty 100 Watt Output: FT-891 transceivers provide a stable 100 watts (25W AM) of high-power output. High reliability is assured by Yaesu's careful circuit design with efficient thermostatically controlled dual internal fans and a diecast heat-transferring chassis. IF DSP: Yaesu's IF DSP provides effective and optimized QRM rejection. 32-bit high-speed floating-point DSP (maximum 3000 MIPS) provides cancellation/reduction (DNR) of the random noise that is so frequently frustrating while on the HF bands. Highly optimized AUTO NOTCH (DNF) automatically eliminates dominant beat tones, and the CONTOUR and the APF are very effective receiver noise reduction tools during HF-band operations. USB Connection: A native USB connection supports PC connectivity with a single cable, allowing for full rig control via a virtual serial port connection (VCP). Special features for ease of operation: * Large diameter Main Tuning Dial (1.6 in. / 41mm) with torque adjustment * Pop-up menu for quick and easy navigation * Multi-function knob * Large transmit/receive indicator * Three programmable front panel function keys Support for ATAS (Active Tuning Antenna System): FT-891 transceivers fully support the ATAS-25 and ATAS-120A Active Tuning Antenna System (optional), allowing for plug-and-play field and mobile operation. Ultra-compact: Measuring 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm), FT-891 transceivers are innovative Multi-band, Multi-mode Mobile/Portable transceivers with a rugged case design. Optional FC-50 Antenna Tuner Unit: Yaesu's FC-50 is a microprocessor-controlled antenna tuner that is designed specifically for the FT-891. An FC-50 may be easily coupled with FT-891s and includes all necessary interconnect cables for operation right out of the box. Specifications: Frequency Range: TX: 1.8-54 MHz (Amateur Bands only) RX: 30 KHz – 56 MHz Channel Step: 2/5/10 Hz (SSB, CW), 10/100 Hz (AM, FM) Frequency Stability: plus/minus 0.5 ppm 14 degrees F to 122 F (-10 C to 50 C) Modes of Emission: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM) Impedance: 50 Ohms, unbalanced Supply Voltage: 13.8V DC plus/minus 15 percent, negative ground Current Consumption: RX: 2.0A (Signal Present) TX: 23A Operating Temperature Range: 14 to 122 degrees F (-10 C to 50 C) Case Size (WxHxD): 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm) w/o knobs Weight (Approx.): 4.18 lbs. (1.9 kg) Output Power: 100W SSB/CW/FM (AM: 25W) Circuit Type: SSB/CW/AM: Triple-conversion Super-heterodyne FM: Double Conversion Super-heterodyne Intermediate Frequencies: 1st: 69.450 MHz / 2nd: 450 KHz Maximum AF Output: 2.5 W 4 ohms with 10 percent THD Audio output Impedance: 4 to 16 Ohms (8 Ohms nominal) Receiver sensitivity: * SSB/CW (S/N 10dB) 0.158uV (1.8-30 MHz), 0.125uV (50-54 MHz) * AM (S/N 10 dB) 4uV (0.5-1.8 MHz), 1.6uV (1.8-30 MHz), 1.2uV (50-54 MHz) * FM (12 dB SINAD) 0.35uV (29, 50-54 MHz) Note: For additional information, please look at the files under the "Documentation" tab. Yaesu transceivers have always represented top-of-the-line products. Yaesu continues their legendary quality and features with Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers. Order now from DX Engineering!

4.92 out of 5 stars ( 182 )

$749.95

Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers

Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers are the latest generation in all mode, all band MF/HF/VHF/UHF transceiver with C4FM (System Fusion) Digital capability. FT-991A transceivers include multi-mode operation on CW, AM, FM, SSB, and Digital Modes (Packet, PSK31, RTTY and C4FM), with 100 Watts of HF/50 MHz capability (50 Watts VHF/UHF). These superior-performance transceivers include a high-resolution full-color 3.5 in. TFT touch panel for exceptional operability and visibility. This "A" version of the FT-991 also includes two new exciting and useful advanced features - a Real-Time Spectrum Scope and a Multi-Color Waterfall Display. The new dynamic real-time spectrum scope gives radio operators the ability to graphically view the location of signals on the band while they listen to the received audio, allowing them to quickly move to the desired signal. The strength of signals on the band can readily be seen on the Multi-Color Waterfall Display. Chronological order color differentiation allows operators to easily recognize weak signals at a glance; signals that might otherwise be missed on the spectrum scope. FT 991As feature a rugged state-of-the-art highly balanced receiver circuit configuration. The high-speed floating point DSP from Texas Instruments used in the receiver design guarantees excellent interference rejection with actual signals under real-world conditions, not only on HF but also in the VHF and UHF bands. The 1st IF frequency incorporates selectable robust 3 kHz and 15 kHz roofing filters that effectively attenuate interfering signals. The triple conversion circuit structure allows highly flexible gain distribution at each stage. These FT-991A transceivers could not provide functions easier than at your fingertips with their 3.5 in. full color TFT display for superior operability and visibility. These rigs can be connected to a computer using a USB cable for CAT control and firmware updates, or the use of an optional SCU-17 Interface Unit to support USB Audio In/Out, TX Control (PTT, Key, and Shift). The RF amplifier in FT-991A transceivers provides a clean and solid 100 Watts of power (50 Watts VHF/UHF) and is combined with a large heat-sink and forced air automatic cooling fan to increase operating time and prevent overheating. These radios are a compact, lightweight chassis suitable for portable, mobile and base installations. Measuring 8.8 W x 3 H x 9.9 in. deep at just 9.7 pounds, this robust full-featured mobile/portable radio is ready to go when and where you are! The integral internal high-speed Automatic Antenna Tuner included in the transceiver uses an LC switching network that has a large-capacity 100 channel memory. The tuning data is automatically memorized to reduce tuning time when changing frequency. A plus/minus 0.5ppm High Resolution DDS/PLL Local Oscillator included as part of the standard radio package. Yaesu FT-991A Transceiver Specifications: * Frequency Ranges: RX 30 kHz - 56 MHz, 118 MHz - 164 MHz, 420 MHz - 470 MHz (specified performance, amateur bands only) * TX 1.8 MHz - 54 MHz, 144 MHz - 148 MHz, 430 MHz - 450 MHz (amateur bands only) * Circuit Type: Triple-Conversion Superheterodyne: SSB/CW/AM * Double-Conversion Superheterodyne: FM/C4FM * Modulation Type: A1A(CW), A3E(AM), J3E(LSB, USB), F7W(C4FM), F3E(FM), F1D(PACKET), F2D(PACKET) * Power Output: SSB/CW/FM - AM Carrier * 160 - 6 Meters: 100 - 25 W * 2 Meters/70 Centimeters: 50 - 12.5 W * Weight: 9.5 lbs. * Yaesu Warranty: 3 Years Supplied Accessories * Hand Microphone (MH-31A8J) * DC Power Cord * Spare Fuse (25A) * Operating Manual * Warranty Card Please view the Yaesu information for this product by clicking on the "Documentation" tab. When you are looking for a great Amateur Radio transceiver, consider one of these fine Yaesu FT-991A HF/VHF/UHF Multi-Mode Transceivers from DX Engineering!

4.83 out of 5 stars ( 233 )

$1,449.95

Kenwood TM-D750A Tri-Band Digital Mobile Transceivers

Kenwood TM-D750A Tri-Band Digital Mobile Transceivers set a new standard for Amateur Radio operators seeking advanced digital communications, integrated navigation capabilities, and exceptional ease of use in a modern tri-band mobile transceiver. Covering the 2 meter (144-148 MHz), 1.25 meter (222-225 MHz), and 70 centimeter (420-450 MHz) amateur bands, the TM-D750A combines powerful RF performance with a feature-rich operating platform designed for voice, data, APRS®, and D-STAR® communications. At the heart of the TM-D750A is a bright, high-resolution 3.45-inch TFT color LCD that delivers exceptional clarity, vibrant color, and wide viewing angles. Enhancing situational awareness, the radio features Visual Scan with Waterfall, displaying scan history and signal activity in a vivid, easy-to-interpret waterfall format that helps operators quickly identify active frequencies and band conditions. Multiple dedicated knobs and push buttons provide fast, intuitive access to key functions, making it easy to navigate menus, adjust settings, and manage communications whether operating from a vehicle, base station, or the field. Built with connectivity in mind, the TM-D750A features integrated Bluetooth®, Wireless LAN, GPS, and APRS functionality, enabling seamless communication across multiple platforms. Its built-in APRS-compliant TNC supports real-time two-way data communications, making it ideal for position reporting, tactical messaging, event coordination, and emergency communications. The integrated GPS receiver and patch antenna provide accurate location information without the need for external accessories, while the built-in KISS TNC supports packet communications at 1200 and 9600 bps, standalone digipeater operation, and IGate applications when connected to a computer. For operators utilizing digital voice technology, the TM-D750A offers extensive D-STAR® compatibility and network connectivity options. Integrated Wireless LAN allows direct access to D-STAR networks through Direct Mode without requiring additional hardware. The transceiver also supports Reflector Terminal Mode, enabling convenient access to D-STAR reflectors through a Windows® PC or Android™ device using either a USB or Bluetooth connection. With simultaneous reception capability, operators can monitor and receive both voice and data communications at the same time, expanding operational awareness and communication flexibility. The transceiver's thoughtfully engineered layout includes a remote control head with a built-in speaker, offering versatile installation options without sacrificing audio performance. Renowned KENWOOD audio quality ensures crisp, natural-sounding receive audio, while a comprehensive voice guidance system featuring more than 900 voice phrases and four selectable speech speeds enhances accessibility and operating convenience. Modern connectivity is further enhanced with USB-C ports for straightforward programming, firmware updates, and data communications. Additionally, dual microSD card slots, located on both the remote control head and RF deck, provide expanded storage for configuration data, operational logs, and future functionality. Whether you're coordinating APRS activities, accessing D-STAR networks, operating packet radio, or simply seeking a highly capable tri-band mobile transceiver, the Kenwood TM-D750A delivers an impressive combination of advanced digital technology, reliable performance, and user-focused design for today's demanding Amateur Radio operator.

4.75 out of 5 stars ( 4 )

$1,199.95

ICOM IC-R8600 Communications Receivers

ICOM IC-R8600 Communications Receivers represent the Next-Generation in World-Class Receivers! And the next step in SDR evolution! Why a Next-Generation, World-Class Receiver? While ordinary wide band receivers need to have dedicated demodulator circuits for each receive mode, the IC-R8600 utilizes advanced digital processes that demodulate the incoming signals. The IF signal is sent to the A/D converter, resulting in a digital signal, which is then processed by a high-speed FPGA (Field Programmable Gate Array) and DSP to be restored to an analog audio signal. The received signal is processed to be demodulated according to the receive mode, including not only conventional analog communications in CW, AM, SSB, FM, WFM and FSK, but also advanced digital communications such as D-STAR, P25, NXDN, dPMR and DCR. Of course, this is easily achieved by using Software Defined Radio (SDR) technology. Here is some additional Information for ICOM's IC-R8600 Wideband Communications Receiver with Multiple Digital-Mode Decoders: * 10 kHz to 3 GHz general coverage (YES! That's 3.0 GHz!) * Ultra-wide frequency coverage with RSSI (Received Signal Strength Indication) function * Fast moving, real-time spectrum scope and waterfall functions * Large 4.3 in. TFT color touch screen display * Decodes multiple digital protocols, including D-STAR, NXDN™, dPMR™ and APCO P25 * Cellular blocked * I/Q signal output for use with third-party SDR software and/or external decoding * Optional RS-R8600 PC remote control software allows control of all receiver functions * Clear audio quality using FPGA/DSP base architecture with Superheterodyne circuitry * SD card slot for received log, decode log and voice recording * Optional SP-39AD external speaker with integrated receiver power supply Additional features include: * PL-259 Antenna Connector * Type-N Antenna Connector * RCA Antenna Connector (500 ohms- for long wire antennas, etc.) * MUTE Input Jack- Use your R8600 with your favorite transmitter! * 10.7 MHz IF Output Jack * 10 MHz Reference Frequency Input/Output * I/Q Output Jack * Ethernet Connector * S-meter Output Jack * External Speaker Jack * AF/IF Output Jack * ICOM CI-V Remote Control Jack * USB Connector * DC Power Socket * DC IN Jack (12V nominal) * AUX Jack * Ground Terminal Note: Please look at the associated files under the "Documentation" tab for additional product information, including an instruction manual. ICOM's IC-7300 transceiver is renowned for its superior SDR receiver technology. Why not own a communications receiver based on that very same success? Order an ICOM IC-R8600 Communications Receiver for your SWL or Amateur Radio operations!

4.81 out of 5 stars ( 16 )

$2,799.95

—

$3,249.95

Yaesu FT-60R 144/430 MHz Dual-Band HTs

Yaesu FT-60R 144/430 MHz Dual-Band HTs are equipped with extensive receive-frequency coverage, providing versatile two-way amateur communications along with unmatched monitoring. A new-generation Emergency Automatic ID (EAI) feature, for Search-and-Rescue operations, is introduced in the FT-60R! 144/430 MHz FM dual band handheld: * Wide band reception: 108-520 MHz/700-999.990 MHz (cellular blocked) * New emergency automatic ID system * Huge LCD * High power output 5W * Ni-MH long-life battery: FNB-83 (7.2 V, 1,400 mAh) * SAD-24B Charger * SBH-13B Charging Stand * Programmable keys for user convenience * Split CTCSS/DCS and DCS encode-only capability FT-60R's small size allows you to take it anywhere—hiking, skiing, or while walking around town—and its operating flexibility brings the user many avenues of operating enjoyment. Its incredibly tiny FNB-83 Rechargeable Nickel-Metal Hydride Battery Pack provides up to 5 Watts of transmit power on the 144 MHz and 430 MHz Amateur Bands. Besides 144- and 430-MHz transceiver operation, the FT-60R provides receive coverage of the VHF and UHF TV bands, the VHF AM aircraft band, and a wide range of commercial and public safety frequencies! Additional features include: * Over 1000 Memory Channels with Alpha-Numeric Labels * Ten Memory Banks for Channel Allocation * High Power Output: 5 Watts * Long-life FNB-83 (7.2 V/1400 mAh) and 4-Hour Charger included * CTCSS and DCS Encode/Decode, with Split Tone and DCS Encode-only Capability * One-Touch NOAA Weather Access * NOAA Severe Weather Alert with Alert Scan * Nine DTMF Auto-Dialer Memories * Two Front Panel Programmable Keys * Convenient Access Key for Vertex Standard's WIRES™ (Wide-coverage Internet Repeater Enhancement System) * RF Squelch (only passes signals exceeding programmed level) * Mono-band and Memory-only Operating Modes * Rugged Diecast, Water-Resistant Case Construction * Huge LCD Display * Transmit Time-Out Timer (TOT) and Automatic Power-Off (APO) * Automatic Repeater Shift (ARS) * YAESU's exclusive ARTS™ (Auto-Range Transponder System), which "beeps" the user when you move out of communications range New and exciting features of the FT-60R are the Emergency Automatic ID (EAI) function, that will automatically cause your FT-60R to transmit your call-sign and engage your rig's microphone, even if you're disabled and unable to press the PTT switch; Enhanced Paging and Code Squelch (EPCS), that allows you to page a particular station and only receive calls from that station, if desired; and a security password feature to prevent unauthorized use of your transceiver. Please view the Yaesu information for this HT under "Documentation" for the links at the bottom of the part detail page. When you're looking for a versatile handheld transceiver, consider the Yaesu FT-60R from DX Engineering!

4.97 out of 5 stars ( 93 )

$189.99

ICOM IC-2730B Black Edition VHF/UHF FM Transceivers

ICOM IC-2730B Black Edition VHF/UHF FM Transceivers boast all the same great features as the original IC-2730A transceiver, but with a new high contrast black inverted LCD display that offers improved visibility in various lighting conditions, reduced glare, and lower energy consumption. The display size of ICOM's IC-2730B is 1.5 times larger than ICOM's other comparable models, giving way for larger frequency display and channel names. These VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730B transceivers employ a durable PA module and deliver 50W of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730B receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. These IC-2730B transceivers come equipped with an HM-207 Remote Control Hand Mic. An optional VS-3 Bluetooth Headset is available and requires a UT-133/A Bluetooth module to be installed into the IC-2730B. The Bluetooth headset and module are sold separately.

4.74 out of 5 stars ( 19 )

$369.95