Availability
Clearance
Coaxial Dynamics Plug-In Elements
Coaxial Dynamics Plug-In Elements are calibrated to exacting specifications to assure interchangeability with one another, with any Coaxial Dynamics and Bird Electronic RF power instrument in the 7/8 in. line size - whether purchased today or 20 years ago. Their calibration is for any 30 microampere full scale meter movement, including Bird Model 43 and Coaxial Dynamics meters, so these elements may be used interchangeably with very good results. Readily available in several full-scale power ratings from 5.0 Watts to 10,000 Watts and eight frequency ranges starting with 2 to 30 MHz through 1.1 to 1.8 GHz. There are Coaxial Dynamics Plug-In Elements to satisfy most Amateur Radio and commercial RF testing requirements. Element accuracy is maintained by calibrations using RF Power Standards (NIST traceable), supported by more than 30 years of history and experience! Your confidence in the quality and dependability of Coaxial Dynamics Plug-In Elements is secured with the exacting manufacturing techniques and high tolerances that produce consistent quality and repeatable accuracy from element to element. Each element carries a Coaxial Dynamics Two Year Limited Warranty. Whether you are monitoring station power, checking antennas, doing bench repairs or just need accurate equipment output readings, Coaxial Dynamics Plug-In Elements,interchangeable with Bird Electronic Corporation elements, provide frequency coverage and power ratings for your Directional Wattmeter. Order your own high-quality Coaxial Dynamics Directional Wattmeters and Plug-In Elements from DX Engineering!
( 15 )
$189.00
—
$295.00
$151.20
—
$236.00
Clearance
Tigertronics SignaLink USB Digital Communications Interfaces
Tigertronics SignaLink USB Interfaces support all computer program digital modes and digital voice modes, WITHOUT using your computer sound card! This includes legacy modes, such as RTTY, SSTV, and CW, as well as today's most popular modes, including FT8, PSK31, JT65, JT9, FSK441, MSK144, WSPR, Olivia, EchoLink Node and hundreds more! Front panel controls let you adjust your Transmit Audio, Receive Audio and Transmit Delay "on the fly." The SignaLink USB has a state of the art "built-in" low-noise sound card chip. The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. Convenient front panel controls make setup and operation very easy. The SignaLink USB is fully isolated and is compatible with ALL radio Mic, Data, and Accessory Ports. The SignaLink USB - with it's own built-in sound chip- allows you to use your computer's sound card for other computer functions, while enjoying digital communications. No more "You've got mail!" or other computer sounds in the middle of your transmission! Just order the correct fully-assembled interface cable for your radio. Cables are available for mic connector interface or rear panel accessory and data DIN plugs for transceivers so equipped which allows a neat, clean installation! Which cable to order? On the TIG-SL-USB details page click on the "Required Parts" tab to search by radio brand and model. You may also click on "Charts and Guides" to see a complete Cable Interface Listings of all cable to radio selections, including color jumper pictorials. Tigertronics SignaLink USB units are now provided with rubber feet. If you are one of the thousands of happy users with an older Tigertronics unit, the accessory DXE-RBP-500 adhesive rubber feet are a welcome accessory to keep the unit from sliding around. Tigertronics SignaLink USB units feature: -- Easy to set up - Not complicated - Just plug in two cables -- Front panel controls--easily adjust your TX audio, RX audio, and transmit delay without having to open the SignaLink case, optimizing your transmit audio (RF power), receive audio level, and transmit hang time delay on the fly -- Works with ALL radios Works with all radio mic, data, and accessory ports, allowing most users to attach them to the back of the radio and leave the microphone plugged in -- Software included - with a complete listing of freeware, shareware and software available for every digital mode -- Easy hookup to Macintosh or PC - Easy installation--one USB connection to the computer and, in most cases, only one connection to the radio -- No external power required--powered by the computer's USB port -- Built-in low noise sound card--this provides optimum performance and frees your computer's existing sound card for other uses; it also greatly simplifies installation and operation by reducing the number of cable connections and by providing consistent performance that is independent of the computer's sound card -- Complete isolation--eliminates troublesome ground loops and prevents hum and noise from degrading signals -- Transmit audio/side tone output--a rear panel monitor jack can be used with headphones or powered speakers to monitor your transmit audio or side tone during CW operation -- External speaker support--you can plug an external speaker or headphones into their rear panel auxiliary jack and continue to hear your RX audio -- FCC-certified--unlike other competitors, they have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules -- Comprehensive & Easy to follow instructions
( 12 )
$126.00
$100.80
Clearance
ERICO Lightning Rods
ERICO Lightning Rods, also known as air terminals or strike termination devices, are offered in a range of base materials and surface plating. These lightning rods provide a minimum of five full threads of engagement with their mounts. Available in various lengths and diameters, ERICO Lightning Rods will offer a better path to ground than your expensive site equipment. Although there is no 100 percent protection from lightning damage, these lightning rods, when combined with coaxial surge protectors and other standard grounding practices, offer the best protection available. ERICO lightning rods are designed to be installed directly to structural steel in locations such as Amateur Radio and communication towers. Shunt lightning away from other, more destructive paths. Order these quality ERICO Lightning Rods from DX Engineering.
Not Yet Reviewed
$213.99
$171.19
On Sale
Clearance
Kelemen Trap Dipole Antennas
Kelemen Trap Dipole Antennas are high-quality, heavy-duty pre-assembled wire antennas intended for permanent installations. They feature special traps made with of PTFE (Teflon®) insulated coax for high Q and low losses, offer high performance multi-band operations—and are excellent shortened antennas where there's not enough space for a full-size dipole. Kelemen Trap Dipole Antennas include a series of monoband models, as well as a series of multi-band models that cover an extensive combination of HF bands from 160m through 10 meters. Specific models handle either 400 watts, 1,000 watts or 2,000 watts PEP SSB and CW at resonance. Kelemen Antennas are fully temperature-resistant and weather-proof, and are manufactured from high-quality materials. Balun cases are constructed of transparent, weather-proof polycarbonate with a bottom-mounted SO-239 (UHF female) connector. Hardware and clamps are all stainless steel. Each antenna is completely assembled with the balun, clear PVC-insulated stranded copper wire, stainless wire clamps and egg insulators, ready for operation. Just add rope and coax to complete your Kelemen wire antenna installation. Kelemen Trap Dipole Antennas may be mounted horizontally or in an Inverted-Vee configuration with a central support required. Many Kelemen Antennas are perfect for portable operations because of their low weight. Their coaxial traps are much lighter than conventional traps, making it easier to keep the antenna at an effective height. In many cases they can be easily supported by a single fiberglass pole. For base operations, these antennas should be placed high, in an unobstructed location well away from buildings to limit shifting of resonant frequencies. Kelemen Antennas are often the best possible antenna choice for full-time base operations, offering the advantages of specialized multi-band coverage that perfectly complements the other antennas of the station. Order Kelemen Antennas in North America exclusively from DX Engineering.
( 30 )
$219.99
$164.99
Clearance
Open Box
Antennas-Amplifiers LPF30 HF Low Pass Filters
Product Line Title: Antennas-Amplifiers LPF30 HF Low Pass Filters Antennas-Amplifiers LPF30 HF Low Pass Filters are designed for use with legal-limit linear amplifiers up to 2kW. They operate across a passband frequency range of 1.5–29.7MHz with a low insertion loss of 0.07dB, maintaining signal integrity while suppressing harmonic frequencies generated by the amplifier. These filters feature a 50-ohm nominal impedance and come equipped with SO-239 coaxial connectors. Precision-tuned and verified using a calibrated HP8753ES network analyzer, they deliver low return loss and consistent attenuation performance. The LPF30 Low Pas Filters support flexible mounting in any position with the included 5mm mounting holes. Exceptional Performance is achieved through careful design, tuning, and component selection.
Not Yet Reviewed
$332.99
$249.74
Clearance
Times Microwave Systems® Hex Crimp Dies
Times Microwave Systems Hex Crimp Dies are used with their HX-4 crimp handle to compress crimp ferrules on their coaxial cable crimp shield connectors. The ferrules make a secure mechanical connection between the connector and its associated coaxial cable. Simply choose your die based on the Times crimp shield connector you wish to use. These heavy-duty steel dies are sized for Times Microwave Systems' TC and EZ Series crimp shield connectors. Order your Times Microwave Systems Hex Crimp Dies from DX Engineering… today! LMR® is a registered trademark of Times Microwave Systems.
Not Yet Reviewed
$305.99
$244.79