Availability
Clearance
Juggling Snowman Animated LED Display
This snowman's show starts when the sun goes down! This indoor/outdoor Juggling Snowman animated display has a metal frame that's pre-wired with 265 colorful LEDs that make an amazing juggling animation. Includes ground stakes, spare bulbs, and a 43" cord. UL-listed. 40" W x 60" H
Not Yet Reviewed
$139.99
$59.50
Clearance
Waving Santa Animated LED Light Display
It's as energy-efficient as it is beautiful! This five-foot-high display lights up as the waving frame of Santa Claus, and it's lit by 273 brilliant LEDs. Get ready to show off your holiday spirit with the Waving Santa animated LED light display! Some assembly is required.
Not Yet Reviewed
$149.99
$84.50
Clearance
VE2DX Electronics CT17B-6USB V2 USB Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-6USB V2 USB Icom Interface 5-Port TrueCIV Data Hub connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. The USB-C data port of the CT17B-7DM V2 is also protected by the same principles as TrueCIV, called TrueTTL, for stable clean communications to the computer and successful integration of devices with applications. This interface delivers perfect CI-V and USB data for many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. Additionally, the CT17B-6USB V2 interfaces to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
Not Yet Reviewed
$113.99
$96.89
Clearance
The ARRL Handbook 101 - Softcover 2024 Edition
The ARRL Handbook 101 for Radio Communications is your complete guide to wireless technology experimentation, practice, and development. Since 1926, the Handbook has captured the state of radio science and technology in one authoritative work. Use its more than 1,200 pages of amateur radio know-how to delve into radio electronics, circuit design, digital modulation techniques, and equipment construction. The 101st edition of The ARRL Handbook introduces a new editor, Gregory D. Lapin, PhD, PE, N9GL. Lapin and a team of subject matter experts have revised entire chapters on radio fundamentals, transmission lines, general safety, assembling a station, and more.
Not Yet Reviewed
$69.95
$52.46
Clearance
MFJ Analyzer Accessory Packs
MFJ analyzer accessory packs are genuine accessory packs for your MFJ analyzers. Each kit includes a dip meter coil, carrying case, and a 12 Vdc AC adapter.
Not Yet Reviewed
$129.95
$97.46
Clearance
Open Box
Gator Cases Rackworks Equipment Rack Shelves
A Gator Cases Rackworks Equipment Rack Shelf will support and mount equipment that is not built to be rack mountable. A wide variety of multi-purpose rack shelf configurations and depths allow you to customize your equipment case. Available shelf models include solid metal, pre-drilled with many holes for equipment mounting and several versions have elongated slots for ventilation. All Rackworks Equipment Rack Shelves are made of cold rolled 16 gauge steel with a black powder coated finish. These are rugged metal shelves to accommodate all types of equipment. They may be mounted for use as a tray or inverted and used as a platform. Customize the configuration of your case with Gator Cases Rackworks Equipment Rack Shelves from DX Engineering.
( 3 )
$84.99
$59.49
Clearance
ERICO Lightning Rod Mounting Hardware Accessories
ERICO Lightning Rod Mounting Hardware Accessories include mount bases that facilitate mounting ERICO threaded lightning rods to horizontal pipes, tubes or rods from 1.5 to 2.5 in. outside diameter. For mounting to vertical tubes (i.e. tower legs) add ERICO right angle adapters. ERICO mount bases feature cast bronze mounts for ruggedness and weather resistance. ERICO right angle adapters provide an additional 2 in. offset when used with lightning rod bases. Protect your valuable equipment as much as possible. Mount your ERICO lightning rods with ERICO Lightning Rod Mounting Hardware Accessories from DX Engineering.
Not Yet Reviewed
$65.99
—
$84.99
$52.79
—
$67.99
Clearance
ICOM Transceiver Plug-In Modules
ICOM transceivers have a plethora of built-in features. But, the fun doesn't have to stop there, with their line of Transceiver Plug-In Modules that add additional capabilities, including, Bluetooth Units, voice synthesizers, decoders, and D-STAR digital units.
( 13 )
$101.99
$76.49
Clearance
Scratch & Dent
DX Engineering Replacement TW Antenna Structures
DX Engineering Replacement TW Antenna Structures are direct-replacement structures for the top (DXE-TW-BAS-TOP) or bottom (DXE-TW-BAS-BTM) of your DX Engineering TW Adventurer, Explorer, Globetrotter or Solo Explorer compact vertical dipole antennas. No one ever wants their antennas damaged, but accidents do happen; especially with antennas as portable as these TW Series antennas. Made of high-quality black powder-coated aluminum, these replacement parts are also compatible with older TW portable or stealth antennas. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. If you have need of a replacement top or bottom section of your TW antenna, order DX Engineering Replacement TW Antenna Structures and get your TW antenna back in great shape! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$128.99
—
$139.99
$77.39
—
$83.99
Clearance
VE2DX Electronics CT17B-5X V2 Icom/Xiegu 5-Port TrueCI-V Data Hubs
VE2DX Electronics CT17B-5X V2 Icom/Xiegu 5-Port TrueCI-V Data Hubs connect Xiegu and Icom transceivers to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. Designed with TrueTTL/TrueCI-V technology, which is a combination of advanced RFI filtering on all ports, signals, power sources and grounds, with an auto-leveling design that ensures the output signals on all five ports remain at MAXIMUM TTL levels. These five-port CI-V hubs feature USB-C power, CI-V status LEDs, and magnets under the enclosure to aid with installation. They will support many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-5X V2 interfaces to all Xiegu HF transceivers, which utilize the Icom CI-V protocol, with a 3.5mm mono audio jack (X5105), 3.5mm TRSS multifunction jack (X6100), or a MiniDin connector for the G90 and G106. These CT17B-5X V2 CI-V hubs will also work with Icom remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics TrueCI-V Data Hubs make it easy to interface multiple devices to your Xiegu and Icom transceivers.
Not Yet Reviewed
$109.99
$93.49
Clearance
ICOM Handheld Rapid Desktop Chargers
ICOM Handheld Rapid Desktop Chargers allow drop-in convenience for the busy handheld radio user "on the go." These charging units quickly recharge the battery over a shorter period of time for a speedy recharge turnaround. Just drop your radio into the charger and before you can say "Hiram Percy Maxim," you'll be all set to enjoy it again! Durable, dependable, and easy to use, ICOM Handheld Rapid Desktop Chargers are your best choice for quickly topping off the batteries in your ICOM handheld radios!
( 22 )
$82.99
—
$93.99
$62.24
—
$70.49
Clearance
microHAM Station Master Power Amplifier Control Cables
These quality-built cables are an important link for power amplifier control and come with the appropriate connectors pre-installed to make it easy to interface your power amplifier with a microHAM Station Master or Station Master Deluxe. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$99.99
$69.99
Clearance
DX Engineering Active Receive Vertical Replacement Tubing
DX Engineering Active Receive Vertical Replacement Tubing, model DXE-ARAV-A, is provided for those who might need to replace damaged or lost aluminum tubing for their current model DXE-ARAV4 series Active Receive Vertical antenna. This is NOT the Retrofit Kit. For the conversion of older Active Receive Verticals, see the DXE-ARAV-R which includes a new mounting plate and tubing element. This DXE-ARAV-A kit contains the three 36 in. aluminum sections, 1/4, 3/8 and 1/2 inch, as well as a complete set of new stainless steel element hardware. The required Allen wrenches are also included. The assembled length of this replacement element is 8 feet 6 inches, the same as the original. Refer to the original manual for the DXE-ARAV4-1P, -2P, -4P and -8P for assembly details. The manual is linked at the documentation section at the parts detail web pages.
Not Yet Reviewed
$79.99
$55.99
Clearance
DX Engineering Bead Choke Standoff Kits
DX Engineering Bead Choke Standoff Kits bring a practical solution to a serious problem when ferrite chokes are placed directly onto the metal boom at the feedpoint of beam antennas. A number of Amateur Radio operators and antenna engineers have known for years about the superior choking function of many ferrite toroids beads placed directly on the coaxial cable, as compared to standard feedpoint baluns. A more recent revelation is that the proximity of ferrite beads on coax taped to the aluminum boom of the antenna drastically reduces their effectiveness. DX Engineering Bead Choke Standoff Kits are mounting systems, made of fiberglass or acetyl standoff rods (color varies), PVC carriers and stainless steel hardware, available in four versions. Two sizes of PVC cradle tubes handle two different types of RF bead chokes; 3/4 inch outside diameter (OD) ferrite beads on RG-400 size cable, and 1 inch OD ferrite beads on RG-213 size 0.405 in. coax cable. Each are offered with two different boom size clamps, 2 inch OD and 3 inch OD. Bead Choke Standoff Kits simply hold an RF bead choke and feedline 4 inches away from the metal beam antenna boom (or 4 inches away from the metal mast for a dipole). They maintain the optimal choking performance of ferrite beads on coax. Using DX Engineering Bead Choke Standoff Kits, ferrite bead chokes function at peak performance for these key results: • Prevent feedline radiation of RF • Preserve current balance for proper beam antenna pattern • Prevent feedline shield exterior collected noise and signals from entering the antenna and interior of the feedline, resulting in lower noise floor and enhanced reception The absolute superiority of RF chokes made of many beads on the feedline, over the traditional enclosure balun, is becoming better understood in Amateur Radio. They achieve the best possible RF isolation of the feedline from the antenna and provide completely balanced currents at the feedpoint. Plus, they provide quieter reception with reduction of common-mode noise. Keeping Bead RF Chokes away from metal preserves the optimal function of this method of antenna feedpoint current balance and isolation. This mechanical requirement is simple and practical with DX Engineering Bead Choke Standoff Kits.
( 3 )
$65.99
$52.79
Clearance
COMTEK Stack 2 Yagi Switch Control Consoles
COMTEK Stack 2 Yagi Switch Control Consoles are designed for use with newer or older COMTEK Stack 2 systems. These are the control consoles, only. They include a 2.1mm power cord and operate on 12V DC. Station power, if used, must be 12V DC at 1A minimum (fused). A 3-conductor control line between the control console and relay unit is required. Whether you are replacing a damaged console or building a new system from parts, these COMTEK Stack 2 Yagi Switch Control Consoles from DX Engineering are what your stacking system needs!
Not Yet Reviewed
$124.99
$62.50
Clearance
Open Box
Astron Power Supplies
When you are in need of reliable DC power supply, look no further than Astron Power Supplies. This line of linear DC power supplies are made of heavy-duty, high-quality materials. Astron has your power requirements covered with a wide variety of voltage and amperage outputs and case styles with and without meters. Even their power supplies with only cigarette lighter sockets or with Anderson Powerpoles on the front panel still have DC output terminals on the rear panel. That's convenient! Astron linear-type transformer power supply features include: * Solid state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L * Tight regulation and low ripple at low line input voltage * Heavy-duty heat sink (70A models add a low noise fan) * Three conductor power cord * All metered units feature backlit meters At DX Engineering, we bring you only the best - Astron Power Supplies do not disappoint! Performance specifications: * Input Voltage: Most models are built for 105 to 125 VAC input. Some "220" models are built for 210-250 VAC input. * Output Voltage: As Listed * Ripple less than 5 mv peak to peak (full load and low line) At DX Engineering, we bring you only the best - Astron Linear Power Supplies do not disappoint! For reliability and convenience, look to Astron Power Supplies from DX Engineering.
( 128 )
$106.95
$90.91
Clearance
COMTEK Stack 3 Yagi Switch Control Consoles
COMTEK Stack 3 Yagi Switch Control Consoles are available as replacements for Stack 3 Yagi Systems. When connected to the Stack 3 Switch Relay Unit, these control consoles allow you to select one antenna, all antennas, or any combination of two antennas. Indicator lights for each antenna tell you at a quick glance which antennas are selected. Choose either 115 V AC or 12 V DC control console operation. Keep using your Yagis together! Order COMTEK Stack 3 Yagi Switch Control Consoles from DX Engineering!
Not Yet Reviewed
$124.99
—
$125.99
$68.74
—
$75.59
Clearance
DX Engineering Boom Element Plates
DX Engineering Boom Element Plates are used to build long-boom monoband directional antennas for the standard bands, 20 through 6 meters. They are made from a very strong 3/8 in. thick insulating material, each predrilled for specific DX Engineering saddle clamps and sized dependent upon band and element type, driven or parasitic. They accommodate the mounting of aluminum antenna elements to a 3-inch boom for special beam antenna kits. This series of insulated plates have no hardware; they are component parts used in the DXE-EBB Element to Boom Bracket Kits which include one plate and the appropriate sizes and number of saddle clamps, depending upon band and element type. DX Engineering Antenna Element Tubing Kits, Element to Boom Bracket Kits, and Antenna Boom Tubing Kits are each sold separately.
Not Yet Reviewed
$79.99
$63.99
Clearance
microHAM Radio Interface Cables
microHAM Radio Interface Cables are designed for use with the microHAM microKEYER III Digital Mode and Radio Control Interface or the micro2R Dual Transceiver Station Control Interface and come with the appropriate DB37M or DB15M connectors for these interfaces pre-installed. These quality cables also include the necessary connectors for CAT/CIV/RS-232 control, digital modes, Packet, CW keyer and audio/mic functions. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 10 )
$139.99
$97.99
Clearance
Times Microwave Systems® Coaxial Connectors
Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.
( 38 )
$83.99
—
$108.99
$58.79
—
$87.19
Clearance
VE2DX Electronics CT17B-5X Icom/Xiegu 5-Port CI-V Data Hubs
VE2DX Electronics CT17B-5X Icom/Xiegu/ 5-Port CI-V Data Hubs connect Xiegu and Icom transceivers to multiple CI-V devices that need to be simultaneously served the interfaced transceiver's CI-V data stream. These five-port CI-V hubs feature CI-V status LEDs and magnets under the enclosure to aid with installation. They will support many types of station devices including frequency based decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-5X interfaces to all Xiegu HF transceivers, which utilize the Icom CI-V protocol, with a 3.5mm mono audio jack (X5105), 3.5mm TRSS multifunction jack (X6100), or a MiniDin connector for the G90 and G106. These CT17B-5X CI-V hubs will also work with Icom remote port transceivers from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable. VE2DX Electronics CI-V Data Hubs make it easy to interface multiple devices to your Xiegu and Icom transceivers.
Not Yet Reviewed
$79.99
$67.99
Clearance
Open Box
Chelegance JKEY-25 Portable Straight Keys
Chelegance JKEY-25 Portable Straight Keys are lightweight, entry level straight keys that are ideal for beginners or for portable operation. Made of lightweight aluminum, and weighing at just 325 grams, this key is light enough to use portable but sturdy enough to use in the shack. Add a strap and this key can be used as a leg key. The JKEY-25 comes with a 36 in. long cable terminated in a mono 1/8th in. (3.5mm) connector and a ¼ in. adapter to convert the connector for radios that need the larger plug. Simply plug the key into the key jack on your radio and you're off and running. Additional Feature and Specifications: • Frame Material: 7075 Aviation Aluminum Alloy • Color: Anodized Black • Contact Material: Pure Flat Brass • Cable Length: 36 in. long • Connector: 1/8th in. (3.5mm) Mono Plug • Dimensions: 5.9 in. x 3.5 in. x 2.75 in. (150mm x 90mm x 70mm) • Net weight: 0.72 lbs. (325g) • Included Accessories: 1/8th in. to 1/4 in. mono adaptor
Not Yet Reviewed
$70.99
$53.24
Clearance
Open Box
Par EndFedz® Antennas
Par EndFedz® Antennas are End Fed Half Wave (EFHW) antennas with the match box coax connection at the end of the wire, for convenient and quick stealth portable operations. These single-band and multi-band antennas can be mounted horizontally, vertically, or as a sloper. No ground plane or counterpoise is needed so portable operation could not be easier. Simply hang the far end from a tree limb or send the wire out a hotel room window or balcony. You can use a telescoping fiberglass mast to get the antenna really high in the air and the supplied end insulators the installation easy. Stealth operation in CC&R and HOA antenna restricted locations is simplified. Their all-black construction makes them difficult to see. Each Par EndFedz® features a UV-resistant black ABS plastic housing with a support rope attachment hole that encloses a matching network to allow the antenna to be fed with standard 50 ohm coaxial cable with a PL-259 (UHF male). All hardware is stainless steel and the SO-239 (UHF female) connector is silver plated and has a PTFE dielectric. The antenna wires are either 18 or 26 AWG stranded Copperweld® with 200 pound breaking strength and a tough, 100% UV stable black polyethylene jacket. One end of the antenna wire has a #10 solder lug making attachment to the matching network feedpoint simple and easily replaceable, if necessary. Standard single and multi-band versions handle 100 or 200 watts and higher power versions handle 300 watts. Lightweight QRP PolyStealth models handle 25 watts and are ideal for portable operation because they are lightweight; the MKII model weighs only 8 ounces and the Trail Friendly model weighs only 3.5 oz. Par EndFedz® Antennas require no counterpoise or extra conductors. The EF-ALLBAND-KW model, about 133 ft. in length, covers eight bands, 80 through 10 meters. The ALLBANDKWJR is 74 ft. in length and operates on five bands, 80-10 meters. The 64 ft. EF-40-10-KW operates on four bands. All three models handle up to 1000 watts SSB/CW and 250 watts AM/Digital Modes. The need for an external tuner may vary based on the antenna model selected and the desired operating band. The manufacturer refers to these antennas as "End-Fed Dipoles" based upon the assertion that a "half-wave radiator is a dipole." This is a variant of the classic definition of a dipole which is a center-fed antenna with two radiating legs running in opposite directions from the feed point. Additional claims about the EFHW state that end feeding a half-wave "can energize the radiator 'nearly' as well as a center-fed." Recent anecdotal measurements indicate that the EFHW radiates about 70% as well as a traditional center-fed dipole. More information is available at each Par EndFedz® model listed below. Order yours from DX Engineering.
( 232 )
$74.99
$63.74
Clearance
Open Box
Yaesu Headsets and Earpiece-Lapel Microphones
Yaesu Headsets and Earpiece-Lapel Microphones bring HT audio convenience from your belt to your ear and collar. Featuring specialized connectors on coiled cords with swivel clips, light-touch PTT switches and privacy listening earphone, these mics are a must when you need to use your handheld for extended period of time without disturbing others. The convenience of talking and hearing quickly and easily without pulling the HT off of your belt cannot be beat! Get your Yaesu Headsets and Earpiece-Lapel Microphones right here at DX Engineering.
( 15 )
$84.99
$76.49