Selected Filters


Availability


Part Groups

Results 1 - 5 of 5

Clearance

Open Box

Alpha Delta F Connector Coaxial Cable Surge Protectors

Alpha Delta F Connector Coaxial Surge Protectors are rated for 200 or 2,000 watts at frequencies up to 3 GHz. They are not DC-blocked, so they will pass control and power voltages in applications requiring the coaxial cable to carry both RF and DC voltage. They can be easily mounted for the most effective grounding with their 1/4-20 in. stud in a single hole, or as a bulkhead through the grounding panel. In a study under the auspices of the U.S. Dept. of Energy, utilizing the satellite FORTE launched in 1997 carrying VHF lightning discharge sensors, it was determined that there can be damaging lightning energy emissions throughout the 30 through 300 MHz VHF spectrum. Before FORTE, it was thought that most lightning energy emissions were primarily in the VLF range. Therefore, the damage threat can be anywhere from VLF through VHF. Through the careful design of the Alpha Delta Arc-Plug® gas tube module and precision, constant impedance through-line allowing proper firing characteristics, these devices are designed to provide effective protection throughout this entire spectrum. Other surge protector designs may only utilize simple VLF filters with no gas tube backup. Additional features include: * Excellent broadband performance from DC through 3 GHz, compared to the narrow-band DC-blocked or stub designs. Typical dB loss: 0.1@ 1 GHz; 0.2@ 2 GHz; and 0.5@ 3 GHz. * Innovative impedance-compensated, through-line cavity design allows control voltages to pass through the devices, instead of the "wire-around" requirement of DC-blocked designs. This design allows "in-circuit" cable sweeps. * Innovative, fast-acting gas tube replaceable Arc-Plug® module can be removed and replaced in the field in about one minute with no tools required, and without having to remove the protector from the circuit. The "O" ring sealed knurled knob does the trick! * The Arc-Plug® module and connectors are "O" ring sealed for complete weatherproofing. * Effective performance. Due to the carefully designed reactance-compensated, through-line cavity and Arc-Plug® module placement, customer and government test approvals show that this design is as good as, or better than, DC-blocked designs. Lightning surges do lots of damage annually. Protect your equipment from surges with Alpha Delta F Connector Coaxial Surge Protectors from DX Engineering!

5.0 out of 5 stars ( 3 )

$79.99


$75.99

Clearance

Times Microwave Systems® Coaxial Connectors

Times Microwave Systems Coaxial Connectors are innovative designs of the highest quality. Using genuine LMR® connectors and tools will assure reliable connections and quality you can trust. Times Microwave Systems LMR connectors are designed to work perfectly with LMR cables, so choosing and using Times connectors and termination tools assures reliable connections and puts Times quality you can trust to work for you. Although LMR cables through LMR-400 work with just about any manufacturer's connectors, LMR-600 cable requires Times Microwave Systems coaxial connectors. Order your cable and quality Times Microwave Systems Coaxial Connectors from DX Engineering! LMR® is a registered trademark of Times Microwave Systems.

4.84 out of 5 stars ( 38 )

$83.99

—

$108.99


$54.59

—

$70.84

Clearance

COMTEK Jerry Sevick W2FMI Series Current Baluns

COMTEK Jerry Sevick W2FMI Series Current Baluns were inspired by the writing of Jerry Sevick, as published in his book "Understanding, Building, and Using Baluns and Ununs" also available from DX Engineering. COMTEK baluns are value-engineered for maximum performance at a reasonable cost. They provide a superb, efficient transition between unbalanced coax and balanced antennas. COMTEK Baluns feature: * Jerry Sevick design with modern improvements from DX Engineering's in-depth balun research and development * Unique high-voltage compensating capacitors for unequaled SWR bandwidth * Outstanding ferrite-mix coated toroid core with special design to accommodate close coupling without excessive stress * Exceptionally high and consistent common mode impedance across the specified bandwidth, which provides isolation where it is needed most * Special wire size selection and Teflon-insulated wire sleeves provide exact impedance matching and superb insulation, unlike common Thermaleze wire * Typical insertion loss is less than 0.2 dB * Power handling on HF is 3 kW CW and 5 kW SSB on single core models, 5 kW CW and 7 kW SSB on dual core models * May be used to 54 MHz with reduced ratings * Gasketed SO-239 connectors are silver plated and have Teflon insulation * Sealed in a weatherproof 4 in. x 4 in. x 2 in. NEMA box * Stainless steel hardware Note: Polarity markings on baluns are used for matching phase on balanced antennas when stacking beams for a phased array. Also, the positive terminal should be connected to a vertical element or Inverted-L and the negative terminal goes to the radials. For most regular applications on one antenna, including beams, dipoles and most wire antennas, balun polarity doesn't matter. The best Amateur Radio baluns in the world are from DX Engineering. That includes COMTEK Jerry Sevick W2FMI Series Current Baluns!

4.5 out of 5 stars ( 10 )

$104.99

—

$129.99


$68.24

—

$84.49

Clearance

DX Engineering Bead Choke Standoff Kits

DX Engineering Bead Choke Standoff Kits bring a practical solution to a serious problem when ferrite chokes are placed directly onto the metal boom at the feedpoint of beam antennas. A number of Amateur Radio operators and antenna engineers have known for years about the superior choking function of many ferrite toroids beads placed directly on the coaxial cable, as compared to standard feedpoint baluns. A more recent revelation is that the proximity of ferrite beads on coax taped to the aluminum boom of the antenna drastically reduces their effectiveness. DX Engineering Bead Choke Standoff Kits are mounting systems, made of fiberglass or acetyl standoff rods (color varies), PVC carriers and stainless steel hardware, available in four versions. Two sizes of PVC cradle tubes handle two different types of RF bead chokes; 3/4 inch outside diameter (OD) ferrite beads on RG-400 size cable, and 1 inch OD ferrite beads on RG-213 size 0.405 in. coax cable. Each are offered with two different boom size clamps, 2 inch OD and 3 inch OD. Bead Choke Standoff Kits simply hold an RF bead choke and feedline 4 inches away from the metal beam antenna boom (or 4 inches away from the metal mast for a dipole). They maintain the optimal choking performance of ferrite beads on coax. Using DX Engineering Bead Choke Standoff Kits, ferrite bead chokes function at peak performance for these key results: • Prevent feedline radiation of RF • Preserve current balance for proper beam antenna pattern • Prevent feedline shield exterior collected noise and signals from entering the antenna and interior of the feedline, resulting in lower noise floor and enhanced reception The absolute superiority of RF chokes made of many beads on the feedline, over the traditional enclosure balun, is becoming better understood in Amateur Radio. They achieve the best possible RF isolation of the feedline from the antenna and provide completely balanced currents at the feedpoint. Plus, they provide quieter reception with reduction of common-mode noise. Keeping Bead RF Chokes away from metal preserves the optimal function of this method of antenna feedpoint current balance and isolation. This mechanical requirement is simple and practical with DX Engineering Bead Choke Standoff Kits.

5.0 out of 5 stars ( 3 )

$65.99


$52.79

Clearance

Georgia Copper Flexible Ground Strap Jumpers

Georgia Copper Flexible Ground Strap Jumpers are excellent for low impedance outdoor grounding and HF antenna feedpoint and radial system connections. Even weathered to a dull patina, copper strap does not lose its low impedance advantages over wire or cables, for DC and AC through HF and VHF. Plus, flexible copper strap is far superior to tinned copper braid, which holds moisture and disintegrates which causes a undesirable increase in connection impedance over a relatively short time. Flexible SOLID Copper Strap Jumpers come in pre-cut lengths at 1 in. or 3/4 in. widths and 0.022 in. thickness, punched with 0.280 in. holes at each end, to accommodate 1/4 in. bolts. They're available in two-packs at six different lengths, 6 in., 12 in., 24 in., 36 in., 48 in., 72 in. and also in a variety pack that contains one piece of all six lengths. Order and use any of these specific length straps for your project. Or, use your tin snips and your imagination to make all types of low impedance connections for surge protection grounding boxes and panels, protectors, equipment racks, vertical antenna feedpoints, radial system connections and antenna feedpoint connections from a bolt terminal balun to the driven elements. This pre-cut copper strap may also be used as a shack ground bus or for the bus bar connection to the station ground rod or rods. Hobbyists and Electricians order extra copper straps to have on hand and be ready for those grounding and antenna connection projects that come up. Georgia Copper Ground Strap Jumpers are here at DX Engineering, ready for your needs.

5.0 out of 5 stars ( 10 )

$81.99

—

$114.99


$65.59

—

$91.99

  • 1
  • Page 1 of 1