Availability
Clearance
ICOM ID-52A VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A VHF/UHF Multi-Function D-Star Hand-Held Transceivers allow you to enjoy portable operations like you've never seen before. The large 2.3 in. color display offers more information, an improved interface, and an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750 mW of output so you never miss a contact—and the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. * Key Features: - Integrated GPS - Micro USB port for PC connectivity and battery charging - Micro SD card slot - DR mode for D-STAR operations - Dualwatch with new DV/DV mode - IPX7 submersible rating - Transflective screen layer for improved visibility in direct light - VHF/UHF Airband and FM broadcast receive - Improved heat dissipation efficiency - QSO log in CSV data format - Voice recorder function Larger radio, larger color display, and louder audio. The ID-52A is much more than a replacement to the ID-51A, it's a new way of communicating! An industry-first, a hand-held with a full color waterfall display and the ability to send photos over the D-STAR network. The ID-52A continues to support D-STAR functions with DR mode for easy access to local repeaters based on the internal GPS information, as well as Terminal and Access Point modes. Additionally, the radio weighs a mere 10.4 oz. (295g) and has an 80 percent increase in overall volume to hear in loud conditions. Receive Modes - Dualwatch allows for the monitoring of two frequencies or bands simultaneously. VHF/VHF, UHF/UHF and VHF/UHF monitoring are all supported along with the new ability to decode two DV signals simultaneously. Quickly call from either the main or sub bands on the fly. Enhanced UHF capabilities allow for monitoring of Military Air Bands from 225 to 374.995 MHz, and the wideband receiver allows for listening to nearby broadcast FM stations. Bluetooth Enabled Features - The ID-52A incorporates common Bluetooth profiles for audio and data controls, which provide new mobility in the palm of your hand. Icom leads the way by pairing either Icom or third-party headsets for voice communications. The optional VS-3 Bluetooth® headset with the large PTT button allows for hands-free operation. Additionally, users can program 3 buttons to improve operability and mobility. Download the RS-MS1A Remote Control Software on Google Play to change operating frequencies, send texts, and more! Integrated GPS/GLONASS Receiver - With a GPS lock, use the D-PRS mode to send location data, as well as show received station location, distance, and direction. The ID-52A also displays current Grid Square information. This GPS position data can be used for the Position Auto Reply, Near Repeater Search and GPS log functions. Icom ID-52A Specifications (partial, subject to change): * Output Power: 5W / 2.5W / 1.0W / 0.5W / 0.1W * Wideband Receiver Frequencies: 88 – 174 MHz, 225 – 479 MHz * TX Frequencies: 144-148, 440-450 MHz * Channels: 1000 * Bluetooth: Built-in * GPS: Built-in * Waterproof Rating: IPX7
( 26 )
$649.95
$589.95
Clearance
Open Box
Palstar AT2K 2000 Watt Antenna Tuners
Palstar AT2K 2000 Watt Antenna Tuners are the upgrade to the classic AT1500CV tuner, featuring a newly designed, smaller roller inductor, which allows the AT2K to tune 6 Meters. Newly designed capacitors with lower minimum capacitance improve high band performance, while maximum capacitance has been increased to 400pF for better low band performance. The AT2K features a 6 position antenna selector switch. In addition, the Peak/Peak Hold metering from the PM2000A has been incorporated into the AT2K. Forward power metering is in two ranges, 300 and 3,000 watts. Standing Wave Ratio measurements are displayed with this illuminated cross-needle meter. SWR is read directly from the meter face where the Forward and Reverse needles cross. The AT2K matches dipoles, center fed doublets, Verticals, end-fed wire, delta loops, beams, Windoms, Inverted Vees, and many more antenna types. With a chassis made of 11 ga. (.090 in. thick), iridite-treated aluminum, and a durable powdercoated finish on the front panel and top cover, you can have a tuner that will grace your shack for years to come. One eHam.net user wrote about the AT2K, "This is a tuner for life, buy one and you will not be disappointed." Palstar AT2K tuners feature: --Impedance range 20 to 1,500 ohms from 160 to 6 meters (assuming resistive load) --Low minimum custom variable capacitors, 15pF to 400pF at 4.5 kV --26 uH 5 kV ceramic body roller inductor with turns counter --Silver plated inductor wheel shaft and contact wheel Note: For additional information, please look at the files under the "Documentation" tab. Palstar AT2K 2000 Watt Antenna Tuners are destined to become a ham favorite from DX Engineering!
( 31 )
$795.99
$716.39
Clearance
Mastrant Antenna Support and Guy Line Ropes
Mastrant Antenna Support and Guy Line Ropes are available in several sizes and strength ratings, perfect for support of wire antennas, vertical antennas and antenna masts, as well as support of Yagi booms and elements. Mastrant ropes are of the highest quality for strength and are UV-protected for extended longevity. MASTRANT-O is a highly reflective rope (bright orange plus braided reflective tape) based on long-term proven Polyester (Dacron) product line. It is designed for maximum visibility in public places such as Field Day and POTA activities. Like all Mastrant ropes, it is UV stable and resistant to all weather conditions. It has low weight, great abrasion resistance, great durability and is nonconductive (no effect whatsoever on your antenna). Moreover, in contrast to ropes made from aramid fibers (Kevlar, Vectran, Technora, Twaron), it has knot strength about 60 %. Mastrant-P and Mastrant-R Ropes are stronger than other synthetic ropes of the same size, made from proven modern polyester. Mastrant-Q is a new rope made from a blend of polyester and polypropylene, designed specifically for guying applications. It offers an excellent performance-to-price ratio and has a knot strength of approximately 60%. It replaces Mastrant-P in diameters of 6 mm (1/4 in.) and larger. Mastrant-S is a similar polyester/polypropylene rope, distinguished by its highly reflective strands for increased visibility. Mastrant-M is their highest strength rope with the Dyneema® DM20 core, a superior synthetic rope offering high performance at an affordable price. Very high strength, negligible elongation, very low weight, and great abrasion resistance are all attributes that make Mastrant-M the best rope for guying. Larger, stronger sizes of Mastrant-M are used in Europe and other parts of the world for tower guying. Durability and safety are of prime concern to ensure that an antenna installation remains fully operational for a long time. Antennas and guy lines are exposed to changing weather conditions, mechanical strain, UV radiation, humidity, and more. These non-conductive synthetic fibers have all the necessary qualities: high strength, negligible stretch but good flexibility, long life, low moisture collection, fast drying, a minimum bending radius adding the ability to tie knots, good UV radiation resistance, weather durability and resistance to acids and alkali. Conversely, steel guying wires are heavy, difficult to work with, and their strength deteriorates with time due to corrosion and general aging. Electrical conductivity of steel guys is an undesirable feature, as they interact with the antennas and adversely modify radiation patterns. Thanks to recent developments in synthetic materials, both amateur and professional users are changing over to non-conductive guys and ropes. Mastrant offers these products for a variety of applications, from thin support lines used for wire antennas and beams, to rope guys for supporting small and portable masts and vertical antennas. When you need quality rope to install, replace, or modify your antenna systems, consider Mastrant Antenna Support and Guy Line Ropes, now available from DX Engineering.
( 186 )
$851.99
$681.59
Clearance
Yaesu RF Mu-Tune Kits and Units
Yaesu RF u-Tune* filters, pronounced "Mu-Tune", are the most advanced and selective receiver front-end preselector filters ever made available for Amateur Radio transceivers. Adding ultra-sharp selectivity, these devices dramatically enhance the receive performance of compatible Yaesu transceivers. The receiver front-end pass band provided by Yaesu RF Mu-Tune Preselector is an amazing 10 to 30 kHz, depending upon band. This can be of tremendous value in ensuring clear and quiet reception on crowded bands, especially during contest and DX operations. RF Mu-Tune Kits are external add-on options which are available in three band coverage models for ONLY Yaesu transceiver model series' FT-dx5000, FT-dx3000, FT-dx1200, FT-950 and FT-2000. Choose any one, two or three units for the band coverage you desire: *RF Mu Tune Kit A External Preselector for 160 meters *RF Mu Tune Kit B External Preselector for 80 and 40 meters *RF Mu Tune Kit C External Preselector for 30 and 20 meters Connection cables are included with each kit for the use of one, two or all three of these external units with any of the excellent Yaesu transceivers listed above. Any or all of the connected optional RF Mu-Tune Preselectors automatically adjust to your operating frequency. Especially useful on low bands where strong signals are often adjacent to the desired weak signals, the high Q and shape factor of permeability-tuning was used successfully in many classic Yaesu transceivers. The advanced circuit design and ultra-high quality components of these modern Mu-Tune units narrows the front-end pass band to only a couple dozen kilohertz. Providing interference rejection significantly better than the transceiver's standard VRF (Variable Response Filter) preselector, Mu-Tune can also be manually adjusted to provide additional relief from near frequency interference. Yaesu RF Mu-Tune Kits are the most advanced RF preselector filters ever designed for Amateur Radio transceivers. Reduced Intermodulation Distortion and enhanced Blocking Dynamic Range with a lowered noise floor in your Yaesu transceiver is available with Yaesu RF Mu-Tuning Kits. Order yours from DX Engineering. *The Greek alphabetical character "Mu" in the manufacturer's name of these products is not presently available for this web display system. The lower case letter u and the word "Mu" have been substituted. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ NOTE: Three internal only RF Mu-Tune Units, options for pre-installation ONLY into the FTdx9000MP transceiver model, are available by calling to pre-order when ordering that transceiver. Yaesu provides their installation into your specially ordered FT-dx9000MP model only. They are listed for reference as follows: MTU-160 covers the 1.8 MHz band, the MTU-80-40 covers the 3.5 and 7 MHz bands and the MTU-30-20 covers the 10.1 and 14 MHz bands. These internal only units CANNOT be used with other models. They are also pre-installed into the FTdx9000D model version. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ All other applicable Yaesu transceivers model series' (FT-dx5000, FT-dx3000, FT-dx1200, FT-950 and FT-2000) require the Mu-Tune Kit A, B or C External Preselectors as described at the top of this listing and in the detailed listings.
( 2 )
$699.99
$559.99
Clearance
Open Box
Astron Rack Mounted Linear Power Supplies
If you're looking for a heavy-duty, rugged, reliable, high-quality power supply, then look no further. Astron Rack Mounted Linear Power Supplies are made with care and precision. They're available in a wide variety of outputs with or without meters. Key features include: * Heavy-duty transformer * Solid-state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models * Maintains regulation and low ripple at low line input voltage * Heavy-duty heat sink * Chassis mount fuse * Three conductor power cord (NEMA 5-15P to IEC 60320 C13) Astron rack mounted power supplies are packed full of performance for your needs. DX Engineering has the model you're looking for. Performance specification: * Input voltage: 105-125 Vac (220-250 Vac on models ending in "220") * RM Series output voltage: 13.8 Vdc +/- 0.05 volts (internally adjustable: 11-16Vdc) * LSRM Series output voltage: 28.0 Vdc +/- 0.05 volts (internally adjustable 22-32 Vdc) * Ripple less than 5mv peak to peak (full load and low line)
( 8 )
$653.95
$555.86
Clearance
Coaxial Dynamics Dual Socket Directional RF Wattmeters
Coaxial Dynamics Dual Socket Directional RF Wattmeters allow you to measure forward or reflected RF power with the flip of a switch. These wattmeters use Coaxial Dynamics standard elements to accurately detect average RF power from 100mw to 10 kW over a frequency range of 0.45 MHz to 2.3 GHz. Dual socket wattmeters use two plug-in elements to simultaneously detect forward and reflected power. Simply connect the wattmeter between the power source and antenna or dummy load, plug in the appropriate measuring elements and select the forward or reflected switch position. The RF power is directly displayed on the 4-1/2 in. triple-scale meter. Versatile and strong, these wattmeters are protected by a rugged, virtually indestructible shock-proof housing. For added convenience, two sockets for storage of additional plug-in elements are located on the back of the unit. Coaxial Dynamics wattmeters employ a rugged shock mounted meter with a mirror-backed scale for easy reading. Along with superior taut band meter technology, they provide reliable and accurate readings and satisfy both the US Navy and Canadian standards for bounce and vibration. This is your assurance of complete and dependable accuracy! Note: For additional product information, please look at the files under the "Documentation" tab. Coaxial Dynamics Dual Socket Directional RF Wattmeters offer commercial quality, accuracy and flexibility that Amateur Radio operators can actually afford! Order one of your own Coaxial Dynamics wattmeters from DX Engineering and be sure of your RF reflected power!
( 1 )
$675.00
$540.00
Clearance
Open Box
4O3A 8xAB Antenna Switches
4O3A 8xAB Antenna Switches integrate eight independent A/B switches into a single compact unit, enabling seamless switching between multiple antennas and radios. When paired with two 403A Antenna Genius switches (O3A-40-AG8X2 or O3A-40-AG8X2-N), it forms a powerful 8×4 antenna matrix, allowing up to eight antennas to be routed to four radios with exceptional isolation. Built with the needs of high-power stations in mind, the 8xAB Switch delivers robust performance, intuitive operation, and a clean, maintainable installation. The primary motivation behind the 8xAB switch is the integration of two Antenna Genius smart switches into an 8×4 Super Switch.
Not Yet Reviewed
$775.99
$737.19
Clearance
VE2DX Electronics SO2R 2X6 Remote Antenna Switches
VE2DX Electronics SO2R 2X6 Remote Antenna Switches provide selection of any six antennas for connection to two radios, covering the frequency range of 1.8 to 60 MHz. All control signals are RFI filtered as are all VE2DX Electronics printed circuit boards (PCB) with shielding on both sides. Each SO-239 (UHF female) antenna port features five relays to achieve a design with over 80db port isolation and full legal limit power handling. The simplicity of this 2X6 design allows the use of only 2 coax cables from the station to the tower. Both radio ports have access to any of the unselected 6 antenna ports. The VE2DX Electronics SO2R 2X6 Remote Antenna Switches is available in both 12VDC and 24VDC versions; the 24VDC version is for installation that requires a longer control line to the Remote Antenna Switch . Each provides a terminal for a 12VDC line inside the weatherproof unit for remote accessories. VE2DX Electronics SO2R 2X6 Remote Antenna Switches may be controlled by third party switch consoles, station controllers and computer automation that supports two sets of 1 of 6 selection. A weatherproof chassis protects the electronics; units should be installed outdoors with connectors facing downward.
Not Yet Reviewed
$624.99
$531.24
Clearance
TBX Anti-Climb Panels
With TBX Tower Anti-Climb Panels in place, you won't have the worry of unauthorized people climbing on your tower. These anti-climb panels are made of heavy 20-gauge galvanized steel and completely hide tower braces from unwanted feet. These anti-climb panels are available for towers whose bottom sections are TBX3 through TBX8 and provide climbing protection for towers from 24 to 64 ft. in height. Simply choose the panels to match your section. For example, a TBX6 tower section would use ACP3-6 anti-climb panels. These anti-climb panels are supplied in sets of three to provide complete every-face protection. When you want assurance that no one will be doing unauthorized climbing on your tower, contact DX Engineering for your own set of TBX Tower Anti-Climb Panels!
Not Yet Reviewed
$842.00
$589.40
Clearance
Scratch & Dent
Green Heron RT-21-CDE Universal Digital Rotor Controllers
Green Heron RT-21-CDE Universal Digital Rotor Controllers are completely new, extremely advanced and adaptable controllers for your directional antenna rotation systems. Offering the ultimate in operational capabilities, Green Heron RT-21-CDE Universal Digital Rotor Controllers are the best controllers available for your new rotor unit or as a replacement in existing systems. You can add these great features to your existing rotator unit, without even climbing the tower! * Pre-programmed for Hy-Gain and CDE rotator systems * High-visibility LCD display with adjustable backlight brightness * Fully versatile controls for point-and-shoot or manual push button operation plus presets * Automated rotator computer control through RS-232 or USB * PWM (pulse width modulated) variable-speed control * Start and stop ramping to reduce tower and antenna stresses * Precision heading accuracy up to 1/10 degree * Fully supports side mounted antennas, soft limits prevent running into tower * Allows over-travel up to 720 degrees total * Offset control allows center of rotation at any heading, allows N & S center on same mast, and compensates for slipped mast * Fully user-programmable, reversal and brake delay, speed minimum and maximum, limits, ramps, and much more * Master/slave for stacked arrays, turn together or separately * Counter-rotation, install rotor above rotating tower * Easy front panel setup and setup utility software Replace your old-fashioned rotator controller with a modern, state-of-the-art digital controller! Green Heron RT-21-CDE Universal Digital Rotor Controllers from DX Engineering are pre-programmed specifically for Hy-Gain/CDE HAM-series and T2X (Tailtwister) rotators. However, they are easy to setup for all other rotator units because they are field programmable with convenient, internal, solderless jumpers. Get yours today!
( 6 )
$649.00
$506.22
Clearance
Open Box
Yaesu Rotator Units
Yaesu Rotator Units are available as replacements or as stand-alone azimuth positioners for use with a third party controller. They include only the top mast bracket and hardware. Lower mast brackets are sold separately.
( 19 )
$769.99
$692.99
Clearance
Scratch & Dent
Ciro Mazzoni Loop Antenna Replacement Parts
Ciro Mazzoni Loop Antenna Replacement Parts are stocked for those who need to update or reinstall their Loop Antenna by I3VHF. Parts are all original; exactly the same supplied with each model, MIDI, BABY and STEALTH models, including Actuator motors and Isolator Arms. The updated, current model ATU 2.0 replacement (MZZ-COM1001) is the same as supplied with all three new antennas. So are the Universal AC Power Supply (MZZ-COM1002) and the USB Keyboard (MZZ-COM1003). The Stainless Steel Mast Clamp and hardware (MZZ-COM1005) fit the MIDI or the BABY Loops. The MZZ-BLA1010 aluminum adapter plate is supplied with BABY Loop Tripods, available here as a replacement. Order Loop Antenna by I3VHF Replacement Parts here at DX Engineering.
( 7 )
$799.99
$719.99