Selected Filters


5 Results Found For "75"

Availability


Part Groups

Results 1 - 5 of 5

Clearance

DX Engineering F6 75-ohm Coaxial Cable Assemblies

DX Engineering F6 75-ohm Coaxial Cable Assemblies are intended to be used for HF receive antenna systems as well as for cable or satellite TV system use. They are made with a high-quality, 75-ohm, direct-bury, "flooded" F6-type coax and watertight Snap-N-Seal F connectors. Flooded-style feedline, infused with a waterproof compound, have the distinct advantage of automatically sealing small accidental cuts or lacerations in the cable jacket. Plus, the flooding compound works perfectly with the Snap-N-Seal connector's O-rings to provide a reliable, environmentally sealed connection that prevents shield contamination, with no external waterproofing requirement. These low-loss cable assemblies feature a waterproof polyethylene jacket, dual shields, and connectors that are installed with a unique 360 degree radial compression system. A superior RF integrity of over -95 dB external signal rejection means that DX Engineering F6 75-ohm Coaxial Cable Assemblies are your best choice for any high performance system installation.

Not Yet Reviewed

$28.99

—

$29.99


$20.29

—

$20.99

Clearance

DX Engineering Armor Coated Hex Bolt Hardware Sets

DX Engineering Armor Coated Hex Bolt Hardware Sets are offered in pairs and are intended for use with DX Engineering Super Duty Saddle Clamps or Heavy Duty Saddle Clamps on a customer supplied 1/4 in. plate. These Armor Coated Hex Bolt sets include two hex head bolts, two split washers, two nuts, and two flat washers. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Armor Coated Hex Bolt Hardware Sets are offered in pairs and are available in limited quantities until they are sold out. For all bolt sizes available including sizes not available here in armor coated bolts, see the stainless steel bolts offered. Search for DX Engineering Hex Bolt Hardware Sets.

5.0 out of 5 stars ( 1 )

$6.99


$1.40

Clearance

Open Box

Alpha Delta F Connector Coaxial Cable Surge Protectors

Alpha Delta F Connector Coaxial Surge Protectors are rated for 200 or 2,000 watts at frequencies up to 3 GHz. They are not DC-blocked, so they will pass control and power voltages in applications requiring the coaxial cable to carry both RF and DC voltage. They can be easily mounted for the most effective grounding with their 1/4-20 in. stud in a single hole, or as a bulkhead through the grounding panel. In a study under the auspices of the U.S. Dept. of Energy, utilizing the satellite FORTE launched in 1997 carrying VHF lightning discharge sensors, it was determined that there can be damaging lightning energy emissions throughout the 30 through 300 MHz VHF spectrum. Before FORTE, it was thought that most lightning energy emissions were primarily in the VLF range. Therefore, the damage threat can be anywhere from VLF through VHF. Through the careful design of the Alpha Delta Arc-Plug® gas tube module and precision, constant impedance through-line allowing proper firing characteristics, these devices are designed to provide effective protection throughout this entire spectrum. Other surge protector designs may only utilize simple VLF filters with no gas tube backup. Additional features include: * Excellent broadband performance from DC through 3 GHz, compared to the narrow-band DC-blocked or stub designs. Typical dB loss: 0.1@ 1 GHz; 0.2@ 2 GHz; and 0.5@ 3 GHz. * Innovative impedance-compensated, through-line cavity design allows control voltages to pass through the devices, instead of the "wire-around" requirement of DC-blocked designs. This design allows "in-circuit" cable sweeps. * Innovative, fast-acting gas tube replaceable Arc-Plug® module can be removed and replaced in the field in about one minute with no tools required, and without having to remove the protector from the circuit. The "O" ring sealed knurled knob does the trick! * The Arc-Plug® module and connectors are "O" ring sealed for complete weatherproofing. * Effective performance. Due to the carefully designed reactance-compensated, through-line cavity and Arc-Plug® module placement, customer and government test approvals show that this design is as good as, or better than, DC-blocked designs. Lightning surges do lots of damage annually. Protect your equipment from surges with Alpha Delta F Connector Coaxial Surge Protectors from DX Engineering!

5.0 out of 5 stars ( 3 )

$79.99


$75.99

Clearance

MFJ Monoband Mobile HamTenna Whips

MFJ Monoband Mobile HamTenna Whips make HF mobile operating fun and easy! They're small, lightweight, efficient, and super-easy to use. Their dual feature of center and distributed loading lets you radiate efficiently... you get more power out for working DX and rag-chewing! Each antenna is ruggedly constructed from a heavy-duty, 4 ft. long, 3/8 in. diameter fiberglass rod. They also feature a nearly indestructible 0.125 in. diameter PH-17-7 stainless steel whip and chrome plated brass fittings that will give you years of dependable service. Their sleek, low-profile construction has low wind loading and their semi-rigid fiberglass eliminates the need for springs or guys. A black anti-static jacket protects the loading coil and blends in with any vehicle. The stainless steel whips are adjustable for lowest SWR and include an Allen wrench and complete tuning and matching instructions. They handle 250 watts PEP and depending on the model, they measure up to 7 ft. tall fully extended, and approximately 4 ft. tall when collapsed for easy storage. They simply screw into any 3/8 x 24 in. female mount for quick band-changing! MFJ HF Monoband HamTenna whips are available for 10, 15, 17, 20, 30, 40, and 75 meters. Think about the durable construction, efficiency, and easy band-switching that these antennas provide, and then call DX Engineering today for one of these MFJ Monoband Mobile HamTenna Whips!

4.57 out of 5 stars ( 89 )

$29.95


$23.96

Clearance

Open Box

Hamplus HR-100L Rotator Controller with PC Interface

The Hamplus HR-100L Rotator Controller was developed to offer an inexpensive solution for manual and PC control of all models of rotators that use a 24 volt DC motor and a position indicating potentiometer. It is specifically designed to connect to any existing Yaesu rotator and control cable. This compact desktop unit features a black front panel with four illuminated directional memory buttons, a red three-digit LCD display to indicate rotator azimuth, an azimuth selection encoder knob, two buttons for CW and CCW advance, a special +180° button for an easy Long Path selection, two LEDs to indicate the ends of rotation and one LED in the LCD to indicate overlap. The HR-100L also has an RS-232 Serial port for PC control with any third party software, such as rig control and logging software, which supports the Yaesu protocol for rotators. A rear panel switch selects either 120VAC or 240VAC input voltage and the Yaesu style 6-pin connector is ready for the control cable to any Yaesu or 24VDC rotator, including G-450DC, G-800DXA, G-1000DXA and G-2800DXA, as well as other brands that use a similar configuration. With dimensions (WHD) of 12.2 x 5.9 x 13.0 in (310 x 150 x 330mm), the Hamplus HR-100L Rotator Controller is simple to set up and amazingly easy to use with your rotator! DX Engineering Yaesu Rotator Cable Assemblies are directly compatible, premade in lengths of 10, 50, 75, 100, 125, 150, 200 and 250 ft.

Not Yet Reviewed

$483.99


$387.19

  • 1
  • Page 1 of 1