Filters
Instant Rebate
Kenwood TS-990S HF/6 Meter Base Transceivers
The ultimate Contest/DX experience is here! Kenwood's flagship HF model is equipped with the latest technology and represents an entirely new standard in HF Amateur Radio communications equipment. Kenwood TS-990S HF/6 Meter Base Transceivers come equipped with dual receivers for simultaneous reception on different bands. They also feature narrow-band roofing filters on the main receiver in a full down-conversion configuration. TS-990S features include: * Down-conversion for all amateur bands on main RX * Newly developed mixer achieves 40dBm IP3 * Narrow-band High-IP roofing filters * Comes with 0.1 ppm TCXO * DSP for main receiver, sub-receiver and band scope * Advanced AGC control * Extensive interference and noise reduction functions * Built-in automatic ATU * Dual TFT displays * USB Firmware Updates * Data mode supported by external I/O switching * Transmit and receive DSP equalizers * Two USB Ports on front panel * Voice guidance/Recording function * Remote control from your PC General details: * TX Frequency range: All Amateur bands 1.8 to 54.0 MHz * General coverage RX: Continuous 30 kHz to 60 MHz * Modes: CW, SSB, FSK, PSK, AM, FM * Stability: Plus/minus 0.1 ppm 32 degrees F to 122 F * Antenna impedance: 50 ohms * ATU range: 16.7 to 150 ohms * Line voltage: AC 120 V (60 Hz) * Power consumption: TX: 720 VA, RX: 120 VA (no signal) * Temperature range: 32 degrees F to 122 F * Dimensions in inches: 18.11 W x 6.50 H x 15.75 D Transmitter Details: * Output power: CW/SSB/FSK/PSK/FM (AM); 200 W (50 W) * Modulation SSB: Balanced, AM: Low Power, FM: Reactance * Spurious emissions: HF (Harmonics) -60 dB or less, HF (others) -50 dB or less 50 MHz -66 dB or less * Carrier suppression: -60 dB or less * Sideband suppression: -60 dB or less * Microphone impedance 600 ohms * XIT variable range: Plus/minus 9.999 kHz * Maximum frequency deviation (FM) wide: Plus/minus 5 kHz, (NFM): 2.5 kHz * Transmit frequency response: Within -6 dB (300 to 2700 Hz) Receiver: * Circuit type: Double or Triple Superheterodyne (depending on band/mode) * Sensitivity (TYP): SSB, CW, FSK, PSK (S/N 10 dB); 0.2 uV (1.705 to 24.5 MHz), 0.13 uV (24.5 to 54 MHz) * Sensitivity AM (S/N 10 dB): 2 uV (1.705 to 24.5 MHz), 1.3 uV (24.5 to 54 MHz) * Sensitivity FM (12 dB SINAD): 0.22 uV (28 to 30 MHz), 0.22 uV (50 to 54 MHz) * Image Rejection HF/(50 MHz): 70 dB/(60 dB) or less * IF Rejection Ratio 70 dB or less * SSB Selectivity 200 to 2800 Hz: 2.4 kHz or more (-6 dB), 4.4 kHz or less (-60 dB) CW, FSK, PSK Selectivity (WIDTH: 500 Hz): 500 Hz or more (-6 dB), 1.2 kHz or less (-60 dB) * AM Selectivity: 100 to 3000 Hz: 6.0 kHz or more (-6 dB), 12 kHz or less (-50 dB) * FM Selectivity: 12 kHz or more (-6 dB), 25 kHz or less (-50 dB) * XIT variable range: Plus/minus 9.999 kHz * Notch filter attenuation: 60 dB or more (Auto), 70 dB or more (Manual) * Beat cancel attenuation: 40 dB or more Note: For additional information, please look at the files under the "Documentation" tab. Get more DX! Contesters and DX Chasers will appreciate every feature on these TS-990 radios. Your time in the shack isn't unlimited. Give yourself every opportunity to make each possible contact. Couple a 200 watt transmitter and one of the most capable receivers on the planet to YOUR antenna system. Order one of your own Kenwood TS-990S HF/6 Meter Base Transceivers from DX Engineering!
( 4 )
$9,699.95
Instant Rebate
Yaesu FTDX-101MP HF+50MHz 200W Transceivers
The Yaesu FTDX-101MP HF+50MHz 200W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101MP may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Here are some of the impressive features and specs of the amazing Yaesu FTDX-101MP: - High-Class 160 to 6 Meters 200 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. - FPS-101 Separate External Speaker and Power Supply combination is included - Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) - Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR - 9 MHz IF roofing filter with excellent Shape Factor** - 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) - Ultra-low phase noise 1st Local Oscillator - Completely independent dual receivers with general coverage receive - High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-in Main and Sub Receivers) - Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch (AN) Click 'More Detail' below to see additional information about the FTDX-101MP HF/50MHz 200W Transceivers. The 100 watt version, Yaesu FTDX-101D is also displayed in the Base Transceivers area. Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101MP HF/50MHz 200 Watt Transceiver from DX Engineering. **NOTE: The Yaesu FTDX-101MP has the VC Tune Preselector installed in the MAIN and SUB receivers. Roofing filters installed in the MAIN and SUB receivers are the 12 kHz, 3 kHz and 600 Hz, plus a 300 Hz is installed in only the MAIN receiver. Three optional roofing filters are available, the 300 Hz for the SUB receiver and 1.2 kHz for the MAIN and SUB receivers. Installation and calibration is done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101MP ordered on the web, and shipped from stock, cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom equipped Yaesu FTDX-101MP.
( 44 )
$5,098.95