Availability
Instant Rebate
Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers
Kenwood TH-D75A Tri-Band 144/220/430 MHz D-Star/APRS Handheld Transceivers take a significant leap forward with cutting-edge features designed to enhance the user experience for Amateur Radio operators. Building on the success of its predecessor, the TH-D74, this advanced model boasts simultaneous reception of 2 D-STAR signals, Reflector Terminal Mode for accessing D-Star reflectors, enhanced voice guidance, built-in GPS, digipeater functions, as well as an APRS® Standalone Digipeater. Usability has been prioritized in the design of the TH-D75A, incorporating modern conveniences such as a USB Type-C port for serial communications, audio in/out and battery charging. The inclusion of Bluetooth headset PTT support enhances the hands-free operation of the transceiver. Its fully ergonomic design ensures a comfortable and intuitive user experience that caters to the evolving needs of today's Amateur Radio operators.
( 26 )
$699.95
Instant Rebate
Yaesu ATAS-120A Auto Active Tuning Antennas
Yaesu's patented ATAS™ Active Tuning Antenna System has been enhanced with the latest model: ATAS-120A. This is a unique mobile antenna that provides HF, VHF and UHF coverage with automatic motorized tuning. Designed for use exclusively with Yaesu transceivers that support ATAS, microprocessor controlled voltages are sent on the coaxial cable to adjust the antenna radiator length for best SWR. Yaesu ATAS-120A active tuning antennas cover the 7, 14, 21, 28, 50, 144 and 430 MHz Amateur bands and are compatible with the Yaesu FTX-1, FT891, FTDX-10, FT-710, FT-991A, FT-991, FT-857D, FT-897D, FT-100, FT-100D and the FT-450D. They are typically attached to a vehicle hatch or trunk lip UHF mount (not supplied), also available from DX Engineering. The ATAS-120A antennas were designed for mobile use, however they can be adapted for base, or portable operation with the appropriate mount and a substantial counterpoise radial wire system. Specifications of the Yaesu ATAS-120A Auto Active Tuning Antennas: * Operational Bands: 40, 20, 15, 10, 6 and 2 meters and 70 cm * Height, appx.: 4.59 to 5.25 ft. * Weight, appx.: 1.98 lbs. * Input Impedance: 50 ohms * Maximum Power: 120 Watts, SSB, CW, 50 percent duty cycle * Matched SWR: Less than 2.0:1 with proper grounding or counterpoise As with any HF, VHF and UHF mobile antenna, performance depends upon the grounding of the mount and bonding to the metal vehicle surfaces to create an optimal ground plane. Portable VHF and UHF operation is made possible with the addition of the optional Yaesu ATBK-100 Antenna Base Kit. This kit is not required, nor should it be used, for mobile operation. Operational convenience and performance is available for your Yaesu HF, VHF and UHF Mobile Transceiver. Order Yaesu ATAS-120A Active Tuning Antennas from DX Engineering.
( 49 )
$349.99
Instant Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,298.95
Instant Rebate
Yaesu FC-50 External Antenna Tuners
Yaesu FC-50 External Antenna Tuners are specifically designed for use with Yaesu's FT-891 HF/50 MHz transceivers. These microprocessor-controlled antenna tuners are capable of automatically matching up to 200 memories. They may be easily coupled with an FT-891. FC-50 tuners include all necessary FT-891 interconnect cables for operation right out of the box! Match coaxial-fed antennas from 1.8 to 50 MHz with ease and keep your FT-891 humming happily along. Note: For additional information, please look at the files under the "Documentation" tab. Order Yaesu FC-50 External Antenna Tuners from DX Engineering!
( 19 )
$319.99
XS Power AGM Batteries
XS Power AGM batteries are some of the lightest batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse, making these the batteries of choice for demanding applications who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
Not Yet Reviewed
$323.99
—
$395.99
Instant Rebate
Manufacturer Rebate
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers provide continuous wide-range RX coverage from 30kHz through 174MHz, and from 400 through 470MHz including SWL, FM broadcast, and Air-band. TX band coverage includes HF 160 – 10M, with the addition of 6M, 2M, and 70cm. The Yaesu FTX-1 Field is perfect for portable field operation. This model features up to 10W of power output when used with an external 13.8VDC power supply. By attaching the SBR-52LI Li-ion to the rear of the Field Head, the FTX-1 provides 6W (5W for QRP) stand-alone operation on HF through V/UHF bands in all modes – SSB, CW, AM, FM and C4FM digital. 9-hour stand-alone operating time with 6W on HF bands (SSB), and 8-hour operating time with 6W on V/UHF bands (FM) are available (6-6-48 duty cycle). The FTX-1 Field Head can charge the included Li-ion battery automatically when connected to an External 13.8VDC power supply or use an optional third-party USB Type-C PD (Power Delivery) cable to recharge the battery (45W or greater/ 15V 2A).
( 15 )
$1,349.95
—
$1,799.95
Instant Rebate
Yaesu FC-40 Remote Antenna Tuners
Yaesu FC-40 Remote Antenna Tuners are new, wide-range antenna couplers for all versions (original and "D") of the FT-450, FT-857, FT-897 and FTDX-3000/1200 series of transceivers. FC-40 ATUs make use of control circuitry inside the transceiver, allowing the operator to monitor and control operation of the FC-40, which mounts near the antenna feed point. Fully waterproof, the FC-40 may be mounted outdoors in exposed locations, and will handle 100 watts of transmitter power. FC-40 remote tuners are designed for operation on 7 to 54 MHz, when using an 8 ft. whip like the YAESU YA-007, or on 1.8 to 54 MHz when used with a random-length wire longer than 66 ft. Matching time is typically five seconds or less, and the required drive power is 4 to 60 watts. The FC-40 has 200 match-setting-point memories, for instant recall of the tuning settings. Note: For additional information, please look at the files under the "Documentation" tab. When you're looking for great Amateur Radio gear, consider one of these fine Yaesu products from DX Engineering
( 6 )
$329.99
Instant Rebate
Kenwood TS-890S HF/50MHz Transceiver
Kenwood TS-890S HF/50MHz Transceiver: The most rewarding results often take place when faced with the harshest and most challenging conditions. HF enthusiasts know this all too well because of their love of HF. KENWOOD has the answer. Achieve results through certainty, not circumstance—delivered with impeccable receiver and audio performance. Introducing Kenwood's most advanced DSP transceiver, the TS-890S. Key features of the Kenwood TS-890S HF + 6M Transceiver: * 160-6 meters 100W All Modes * Full Down-Conversion Superheterodyne * Extra-low phase noise Local Oscillator * Built-in Roofing Filters, 15 kHz, 6 kHz, 2.7 kHz, and 500 Hz (270 Hz optional) * 7 in. TFT color display * High-speed Independent Band Scope * Animated Meter display toggles between TS-930 and TS-940 meter styles at a touch! * External display connector (DVI-I) * ANT output for external receiver * RF Attenuator (OFF/6/12/18dB) * Advanced DSP Noise Reduction function * Heavy-duty design delivers transmitter performance and endurance operation * Built-in high-speed automatic antenna tuner for rapid band changes * Encode and decode built-in for CW / PSK / RTTY * 120 channel memory * 3 PF keys (preferred function) * Screen capture * Remote operation via direct LAN connection (see KNS in owner's manual) * Multiple USB connections * KEYPAD jack (add up to 8 external PF keys) Place your order here for the Kenwood TS-890S.
( 33 )
$4,399.95
Instant Rebate
Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners
Yaesu FC-80 Compact 10W HF/50MHz Automatic Antenna Tuners are lightweight and slim automatic antenna tuner designed for the FTX-1 Field Head. These compact units efficiently tune various antennas for the HF through 50MHz bands at a 10W power output level, maximizing your portable operating capabilities. Its unique design allows it to attach directly to the rear of the FTX-1 Field Head. Additionally, using the supplied spacer, the FC-80 can be combined with either the SBR-52LI Li-ion battery pack or the SCF-1 Cooling Fan, offering a modular and space-saving solution for your field station.The FC-80 automatically matches your antenna impedance to the transceiver, ensuring optimal power transfer, eliminates the need for manual tuning allowing you to quickly get on the air.
( 2 )
$315.99
Instant Rebate
Yaesu FT-3165RASP VHF FM Mobile Transceivers
Yaesu FT-3165RASP VHF FM Mobile Transceivers are compact and durable 2-meter mobile transceivers that offer a power output of 65W, which can be adjusted to 65W, 30W, or 5W. An efficient cooling system featuring the Funnel Air-Convection Conductor (FACC) or Wind Tunnel, ensures stable and reliable power performance. The FT-3165RASP transceivers include a new front speaker that delivers 5W of loud audio, specifically tuned for enhanced sound quality. For even better performance in noisy environments, the optional MLS-100 external speaker can be used to maintain clear communication. Additionally, the Super-DX and Audio Digital Signal Processor function boosts receiver sensitivity, improving the reception of weak signals. When the Super-DX key is pressed, the Audio Digital Signal Processing Unit (ASP) is activated, ensuring comfortable audio quality for weak signals and extending the communication range.
( 2 )
$209.95
Instant Rebate
Yaesu FC-90 10W HF/50MHz Automatic Antenna Tuners
Yaesu FC-90 10W HF/50MHz Automatic Antenna Tuners are versatile and compact automatic antenna tuners designed to enhance your HF plus 6-meter operations. Whether you're using long wire or standard 50 Ω antennas, the FC-90 ensures efficient tuning and optimal performance.
Not Yet Reviewed
$315.99
Instant Rebate
Yaesu SBR-52LI High-Capacity Lithium-Ion Batteries
Yaesu SBR-52LI High-Capacity Lithium-Ion Batteries are designed to extend the operating time of Yaesu FTX-1 Series Transceivers. As direct OEM replacement, these batteries ensure reliable performance and long-lasting power for field operations. Keep a charged spare SBR-52LI battery on hand to maximize your operating time.
Not Yet Reviewed
$179.99
Instant Rebate
Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers
Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers continue Yaesu's legacy for legendary receiver design in a compact package, providing uncompromising performance for both mobile and stationary Amateur Radio use. High end 32-Bit floating-point DSP enhances the operating experience, providing a cleaner, clearer signal and reducing overall operator fatigue—thereby creating a more enjoyable environment for any ham. Uncompromising Receiver Circuit Design Ensures Excellent Performance: * Triple conversion with a 1st IF frequency of 69.450 MHz (SSB/CW/AM * 3 kHz roofing filter equipped as standard feature * TCXO provides plus/minus 0.5ppm high-frequency stability (-10 C to 50 C) * 3-Year manufacturer warranty 100 Watt Output: FT-891 transceivers provide a stable 100 watts (25W AM) of high-power output. High reliability is assured by Yaesu's careful circuit design with efficient thermostatically controlled dual internal fans and a diecast heat-transferring chassis. IF DSP: Yaesu's IF DSP provides effective and optimized QRM rejection. 32-bit high-speed floating-point DSP (maximum 3000 MIPS) provides cancellation/reduction (DNR) of the random noise that is so frequently frustrating while on the HF bands. Highly optimized AUTO NOTCH (DNF) automatically eliminates dominant beat tones, and the CONTOUR and the APF are very effective receiver noise reduction tools during HF-band operations. USB Connection: A native USB connection supports PC connectivity with a single cable, allowing for full rig control via a virtual serial port connection (VCP). Special features for ease of operation: * Large diameter Main Tuning Dial (1.6 in. / 41mm) with torque adjustment * Pop-up menu for quick and easy navigation * Multi-function knob * Large transmit/receive indicator * Three programmable front panel function keys Support for ATAS (Active Tuning Antenna System): FT-891 transceivers fully support the ATAS-25 and ATAS-120A Active Tuning Antenna System (optional), allowing for plug-and-play field and mobile operation. Ultra-compact: Measuring 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm), FT-891 transceivers are innovative Multi-band, Multi-mode Mobile/Portable transceivers with a rugged case design. Optional FC-50 Antenna Tuner Unit: Yaesu's FC-50 is a microprocessor-controlled antenna tuner that is designed specifically for the FT-891. An FC-50 may be easily coupled with FT-891s and includes all necessary interconnect cables for operation right out of the box. Specifications: Frequency Range: TX: 1.8-54 MHz (Amateur Bands only) RX: 30 KHz – 56 MHz Channel Step: 2/5/10 Hz (SSB, CW), 10/100 Hz (AM, FM) Frequency Stability: plus/minus 0.5 ppm 14 degrees F to 122 F (-10 C to 50 C) Modes of Emission: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM) Impedance: 50 Ohms, unbalanced Supply Voltage: 13.8V DC plus/minus 15 percent, negative ground Current Consumption: RX: 2.0A (Signal Present) TX: 23A Operating Temperature Range: 14 to 122 degrees F (-10 C to 50 C) Case Size (WxHxD): 6.1 in. x 2.0 in. x 8.6 in. (155 x 52 x 218 mm) w/o knobs Weight (Approx.): 4.18 lbs. (1.9 kg) Output Power: 100W SSB/CW/FM (AM: 25W) Circuit Type: SSB/CW/AM: Triple-conversion Super-heterodyne FM: Double Conversion Super-heterodyne Intermediate Frequencies: 1st: 69.450 MHz / 2nd: 450 KHz Maximum AF Output: 2.5 W 4 ohms with 10 percent THD Audio output Impedance: 4 to 16 Ohms (8 Ohms nominal) Receiver sensitivity: * SSB/CW (S/N 10dB) 0.158uV (1.8-30 MHz), 0.125uV (50-54 MHz) * AM (S/N 10 dB) 4uV (0.5-1.8 MHz), 1.6uV (1.8-30 MHz), 1.2uV (50-54 MHz) * FM (12 dB SINAD) 0.35uV (29, 50-54 MHz) Note: For additional information, please look at the files under the "Documentation" tab. Yaesu transceivers have always represented top-of-the-line products. Yaesu continues their legendary quality and features with Yaesu FT-891 HF/50MHz All Mode Mobile Transceivers. Order now from DX Engineering!
( 181 )
$669.95
Instant Rebate
Yaesu FT-710-FIELD HF/50 MHz Base/Portable Transceivers
The new Yaesu FT-710-FIELD HF/50 MHz SDR Transceivers are now available in a convenient field package that includes a handy carrying belt , but without the SP-40 speaker. The SP-40 External Speaker is available as an optional accessory if you still want to enjoy the benefit of the Acoustic Enhanced Speaker System (AESS) out in the field. FT-710-FIELD represents the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack.
( 50 )
$1,099.95
Instant Rebate
Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
The magnificent new Yaesu FT-710 AESS HF/50 MHz SDR Transceivers represent the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack. The FT-710 AESS model includes the Acoustic Enhancement Speaker System (AESS) and features a large 4.3 inch, high-resolution TFT color multi-function touchscreen display which yields intuitive management of system settings and functions. Large control dials and the ergonomically designed layout of the front panel make the FT-710 easy to navigate. The real-time spectrum scope display adopts the FTDX series SDR 3D scope 3DSS (3 Dimensional Spectrum Stream)[RE1] to visualize changes in signal strengths within the bands.
( 83 )
$1,199.95
Instant Rebate
Yaesu FT5DR 2m/70cm C4FM/FM Digital Handheld Transceivers
Yaesu FT5DR 2m/70cm C4FM/FM Digital Handheld Transceivers provide reliable 5 watt RF power output in an amazingly lightweight, compact design. Enjoy loud and clear analog FM and digital C4FM voice quality with this full-featured 144/440 MHz HT that can deliver a full watt of audio power. Two independent receivers support true dual-band operation (V+V, U+U, V+U, U+V), plus C4FM digital voice and data with the A and B receivers. Large individual LED indicators for the A band and B band present the status and communication modes (C4FM or Analog) of each band instantly. The FT5DR supports simultaneous C4FM digital (C4FM/C4FM standby) and the convenient TOUCH & GO feature allows fast access for communications on often-used frequencies. The FT5DR high-resolution display highlights the frequency of the operational band with its color display selectable to white, blue, or red. Three touch panel keys and the backlit 7-button key pad below the display provide intuitive operability. The Band Scope function monitors in real time, up to 79 displayed channels centered on the current VFO frequency. The center frequency can be tuned by the dial knob or by touching and moving the frequency of a displayed channel bar. With rubber protection on the corners of the main body, the FT5DR has rugged and shock-resistant construction with an upgraded waterproof rating of IPX7. The comfortable size and form of the full-flat back body provides an excellent grip of the radio. The FT5DR C4FM digital communication features include Automatic Mode Select (AMS), Digital Group ID (DG-ID) operation, Smart Navigation function and the FT5DR supports the WiRES-X Portable Digital Node Function. Advanced features of the FT5DR include: * Wireless hands-free operation using the optional Bluetooth® headset (SSM-BT10) * VOX function * Memory Auto Grouping (MAG) * VFO Band Skip Function * Wide-range RX coverage with continuous reception from 0.5–999.99MHz (A Band) and 108–580MHz (B Band) * Built-in high-sensitivity 66 channel GPS receiver * 1200/9600bps APRS Data modem * 2,200mAh High-Capacity Li-ion Battery Pack (SBR-14LI) is standard * Voice Recording Function * Simultaneous AM/FM broadcast reception while monitoring two frequencies * Micro SD Card Slot * A Quick-Release Holster (SHB-26) is a supplied accessory in the FT5DR package that allows single-touch attaching and detaching the transceiver while wearing the holster on a belt. Click "More Detail" for additional information. Yaesu has moved the bar for excellence once again--order your FT5DR FM/C4FM Dual Band Digital Handheld Transceiver from DX Engineering today!
( 54 )
$384.95
Instant Rebate
Yaesu FTM-310DRASP C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers
Yaesu FTM-310DRASP C4FM/FM 144/430MHz Dual Band Digital Mobile Transceivers deliver an impressive power output of 55 watts on VHF and 50 watts on UHF, and selectable power levels of 25W and 5W for flexible operation. Audio performance is strong, featuring a total output of 6 watts—split between a 3W front speaker and a 3W main-unit speaker enhanced by AESS (Acoustic Enhanced Speaker System) technology. The SPU-1 Audio Signal Processing (ASP) module comes pre-installed in the FTM-310DRASP, providing optimized audio clarity in noisy environments.
( 5 )
$399.95
Instant Rebate
Yaesu FTM-510DR C4FM Digital/FM Dual Band Mobile Transceivers
Yaesu FTM-510DR C4FM Digital/FM Dual Band Mobile Transceivers are high-performance C4FM digital/FM 144/430 MHz dual-band mobile transceivers, offering 55W (VHF) and 50W (UHF) transmission power. As an advanced version of the FTM-500DR, it provides improved reception quality and enhanced user-friendliness with new features. The FTM-510DR includes the Super-DX feature but requires an optional SPU-1 board for ASP operation. All other basic and improved features are the same as the FTM-510DR ASP. Key Features: Super DX Function is available in both C4FM digital and FM analog modes, increases the sensitivity of the RF amplifier, improving the reception of weak signals. Optional ASP (Audio Digital Signal Processor) with the installation of the optional SPU-1 Board, ASP can be activated in FM analog mode. Digital signal processing filters out noise from FM signals, ensuring clearer audio reproduction. The ASP AUTO mode automatically activates this function when weak signals are detected. The FTM-510DR is ideal for DX operations, mobile applications, and fixed station use, especially in environments with weak signal reception. The improved PMG (Primary Memory Group) and MAG (Memory Auto Grouping) functions allow for intuitive frequency management. Up to five VFO or memory channels can be monitored simultaneously, with received signals visually displayed and distinguished by color.
( 5 )
$499.95
Instant Rebate
Yaesu FT-3185RASP VHF FM Mobile Transceivers
The FT-3185RASP is a high-performance 2M FM Mobile Transceiver that delivers a reliable 85W of TX power, with selectable options of 85W, 50W, 20W, and 5W. Its massive heatsink, which operates without a cooling fan, ensures consistent RF power output, with. The Super-DX and Audio Digital Signal Processor function enhances receiver sensitivity, improving the reception of weak signals. When the Super-DX key is pressed, the Audio Digital Signal Processing Unit (ASP) is activated, ensuring high-quality audio for weak signals and extending the communication range. Key features of the FT-3185RASP include the Primary Memory Group (PMG) and the Customized Function List (CFL). The PMG allows up to five VFO or memory channel frequencies to be assigned, displaying their reception status in real-time with a bar graph. Users can switch between AUTO and MANUAL modes by pressing and holding the Main VFO knob. In AUTO mode, the received channel is shown, and transmission automatically moves to it. In MANUAL mode, transmission and reception remain on the manually selected channel, with the bar graph displaying activity on other PMG channels when no signal is present on the selected channel. Additionally, the CFL feature allows users to register up to nine frequently used functions from the 44 available menus for easy access.
( 9 )
$229.95
Instant Rebate
RigExpert REAMP High-Accuracy Power Consumption Logger
The RigExpert REAMP High-Accuracy Power Consumption Logger is a fantastic tool for engineering techs and IoT developers. To achieve the longest battery life possible, a very accurate and reliable power measurement tool is required. REAMP acts as a stable and accurate power source for the Device Under the Test (DUT). It allows subtle changes to be seen in the power consumption profile of the DUT. To achieve technical development success quickly, REAMP is the best choice for your Ultra-Low Power projects. * Features and benefits of the RigExpert REAMP: - High-accuracy wide range current measurements from 10 µA to 1 А - Two channels for voltage measurement - 10 Hz to 10 kHz sample rate - TRIG and SYNC gates to synchronize logger with target board and vice versa - Time-limit and infinite measurements modes - Built-in Li-ion battery for cases when DUT current consumption is over 500 mA - Comprehensive power consumption analysis with PC software - Easy navigation both for small or extremely large measurement data sets, zooming and scrolling features - Consumption averaging, as well as real-time analysis - Battery Life Calculator - Ready-to-use Multi-OS software for Windows, Linux, and MacOS * REAMP specifications: - Number of measuring channels: 3 - Measuring range: Current: 10 uA to 1 A (1 channel) Voltage: 0 V to 5 V (2 channels) - Sample rate: 10 Hz to 10 kHz (10 kHz one channel only) - Measuring results displaying: Instant values graph Average values in digital format - Saving data to a log - Easy navigation using horizontal and vertical zooming * Power supply: - PC USB port - Additional built-in Li-ion battery to be used when current consumption is over 500 mA * Interface: - USB connection to a PC (USB 2.0, USB 3.0) - Operation system Windows 7, Windows 8, Windows 10 - Application software "REAMP Logger" - 3 languages support (EN, UA, RU) - Dimensions, WHD: 2.638 x 1.063 x 2.224 in. (67 x 27 x 57mm) - Operation temperature: 0 - 40 degrees C - Weight: 100 g - Warranty: 2 years - GTIN code: 4820185420334
Not Yet Reviewed
$50.00