Availability
On Sale
Icom IC-7300MK2 HF/50MHz Base Transceivers
Icom IC-7300MK2 HF/50MHz Base Transceivers are an advanced evolution of the original IC-7300, designed for superior performance and equipped with modern connectivity. Connectivity upgrades include a first for Icom HF transceivers: the MK2 integrates an HDMI™ output for external display of spectrum scope, waterfall, and audio. Additionally, USB Type-C™ interfaces with dual virtual COM ports and audio I/O enable simultaneous use of digital modes and logging software, while LAN ports provide simplified RS-BA1 remote control without the need for a base station PC. The IC-7300MK2 features an improved Reciprocal Mixing Dynamic Range (RMDR) of approximately 105dB at 2kHz separation and transmit phase noise reduced to –139dBc/Hz at 1kHz offset, delivering cleaner signals and enhanced adjacent-signal handling. Power efficiency is optimized with standby current reduced from 0.9A to 0.7A, minimizing heat generation for stable long-duration operation. Additional enhancements include built-in CW decoding, RX antenna IN/OUT connectors for external filters or preamps. These refinements make the IC-7300MK2 a high-performance, feature-rich solution for serious HF operators seeking cutting-edge SDR technology with robust remote and display capabilities
( 29 )
$1,499.95
$1,398.95
On Sale
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 125 )
$2,099.95
$1,998.95
On Sale
ICOM IC-7760 HF/50MHz All Mode Base Transceivers
ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!
( 8 )
$6,999.95
$5,998.95
On Sale
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,999.95
$3,898.95
On Sale
RigExpert Antenna Analyzers
RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!
( 513 )
$395.95
—
$1,299.95
$379.95
—
$1,199.95
On Sale
ICOM IC-PW2 HF/50 MHz, ALL Band 1kW Linear Amplifiers
The ICOM IC-PW2 HF/50 MHz ALL Band 1 kW Linear Amplifier is a high performance, multi-function linear amplifier and is considered one of the key pieces of equipment for keen competition in DX hunting and contesting. Featuring high power and full duty cycle operation, the IC-PW2 uses new 65V LDMOS power transistors (MRFX1K80HR5) and a high-efficiency power supply to achieve a full 1kW output with a 200VAC Input. The IC-PW2 instantly operates at full power once turned on. Use the IC-PW2 for long contest hours or full-duty FT8 operation. Experience linearity and clean transmission with Digital Pre-Distortion (DPD) Technology with IC-7610. This technology corrects the signal distortion from the IC-PW2, by applying inverse distortion to the output signal from the IC-7610 exciter in advance
( 5 )
$5,499.95
$5,398.95
On Sale
Manufacturer Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 166 )
$1,699.95
$1,649.95
On Sale
Alinco DM-30 Digital Power Supplies
Alinco DM-30 Digital Power Supplies are an affordable switching power supply that packs a lot of features, including Anderson Powerpole connectors. They are an ultra-compact, lightweight design that supports 9-15 V DC variable output and delivers up to 30A peak power to 2-way radio communication products. Alinco DM-30 power supplies are available for 120 V AC input as their DM-30TR or for 230 V AC input as their DM-30ER (E for Europe). A convenient feature for Amateur Radio users: an adjustable Noise Offset Circuit moves unwanted switching noise to another frequency. Other features include: a large illuminated digital Volt/Amp meter, a pair of rear panel binding posts (30A peak), front panel Anderson Powerpole connectors (two pairs 5A peak), switch-selected voltage adjust (9-15 V) or fixed at 13.8 V, ripple less than 80mVp-p and triple circuit protection for short-circuit, over temperature, and current limiting. Alinco DM-30 Digital Power Supply features: * A highly visible, accurate digital Volt / Amp meter allows real-time monitoring of the output current * Two pairs of Anderson Powerpole connectors on the front panel (DM-30TR) add extra versatility * A pair of Banana Jack connectors on the front panel (DM-30ER) adds extra versatility * The Noise Offset Circuit moves unwanted switching noise to another frequency * Designed with reliability in mind, a durable cooling fan keeps DM-30 running continuously under heavy loads * Rear output terminals are large and provide an efficient Max 30A power transfer to your equipment Alinco DM-30 specifications: * Input voltage: 120 V AC 50/60Hz (DM-30TR) * Input voltage: 230 V AC (DM-30ER) * Output voltage: 9 to 15 V DC variable or select voltage fixed at 13.8 V * Output current 20A continuous at 13.8 V DC * 30A max (50 percent duty cycle, 1-minute intervals) * Output voltage regulation: Less than 2 percent variance to full load * Ripple voltage: Less than 80mVp-p * Protection: Over current, over temperature, and short circuit * Fuse protection: DM-30TR, 8A (DM-30ER, 5A) * Dimensions: (W x H x D) 6.10 x 2.80 x 8.07 in. (155 x 75 x 205 mm) * Weight: Approximately 3.53 lbs. (1.6kg) with AC cord Note: For additional product information, please look at the files under the "Documentation" tab. Alinco power supplies offer good value for your ham-radio dollar. Why not upgrade to a switching power supply specifically designed for Amateur Radio? Order Alinco DM-30 Digital Power Supplies from DX Engineering to add versatility, convenience and quality to your shack's DC power!
( 80 )
$145.95
$134.95
On Sale
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
$698.95
On Sale
ICOM IC-V3500 2M VHF FM Mobile Transceivers
Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications
( 10 )
$239.95
$234.95
On Sale
RigExpert MATCH RFE Upgrade License
The RFE license is designed for professionals and enthusiasts working with radiofrequency (RF) systems, offering enhanced functionality for antenna and cable analysis. With this license, users can extend the operational range of their MATCH up to the 500 MHz RF band, making it ideal for a wide array of applications in telecommunications, broadcasting, and electronics diagnostics. The RFE license is tailored for: - RF engineers and technicians diagnosing and maintaining transmission lines. - Network professionals optimizing antenna systems. - Hobbyists and researchers delving into RF analysis within the licensed frequency range. Unlock an important features of the RFE license: TDR Chart Mode – utilize Time Domain Reflectometry (TDR) for fault detection and analysis. This mode allows users to locate faults in transmission lines by sending a short electrical pulse or a step function along the cable. Observing the reflected pulse to calculate Distance to Fault (DTF) using delay measurements, speed of light, and cable velocity factors. Interpreting the amplitude and shape of reflected signals to assess fault characteristics. The RFE license enhances the MATCH analyzer with the LC Meter, enabling precise measurements of Inductance (L), Capacitance (C), Quality Factor (Q), and Loss Tangent (tan δ). This powerful feature offers detailed insights into RF components, allowing for accurate analysis and optimization. User OSL Profiles: Supports up to 10 User Open-Short-Load (OSL) profiles, enabling precise calibration for accurate measurements for different cable lengths, connectors and adapters.
( 4 )
$200.00
$170.00
On Sale
Alinco DM-530T Digital Power Supplies
Alinco DM-530T Digital Power Supplies pack a lot of features into an affordable communications-grade package. The output voltage of the DM-530T switching power supply is adjustable from 5-15VDC, or 13.8VDC fixed and can deliver up to 30A max current. Built-in triple circuit protections exist for short-circuit, over temperature and current limiting. The Noise Offset Circuit helps to reject switching-noise on the receive frequency by moving unwanted switching noise to another frequency. The large, highly visible and accurate digital Volt/Amp meter allows effortless real-time monitoring of output current. Other features of the Alinco DM-530T include: * Auxiliary 30A Output Terminals and USB Ports - Added front panel Anderson Power Pole ® terminals and USB ports provide versatile, quick connections. * Large Binding Posts - The main output terminals are large enough to provide an efficient power transfer to your equipment * Forced Air Cooling - Designed with reliability in mind, a durable cooling fan keeps DM-530 running continuously under heavy loads.
( 11 )
$239.95
$229.95
On Sale
DX Engineering Select Transceiver Packages
DX Engineering Select Transceiver Packages offer Amateur Radio enthusiasts the opportunity to purchase some of our best-selling equipment in conveniently packaged sets. These packages include a transceiver, antenna, and all necessary accessories to form a complete communications package. Certain packages also include a power supply, if required. Basically, once you get the antenna up, it's all you need to get on the air! Choose from packages that lend themselves to all-band / all-mode QRP portable use, 100-watt all-band / all-mode operations through 70cm, an SDR touchscreen 160-6 meter rig that is great for DX and contesting, a compact, ultra-portable, 100-watt all-band / all-mode compact station, or even a compact 50W 1.25 or 2 meter station. When you want a station that includes popular and easy to use components, consider one of these DX Engineering Select Station Packages! Look carefully at the photos for each package and be sure to click on the Kit/Combo Contents tab for more detailed information about every item contained in a package. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 7 )
$2,105.54
—
$2,776.72
$1,744.54
—
$2,765.72
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$139.95
$129.95
On Sale
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
$459.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
On Sale
RigExpert MATCH Advanced Upgrade License
The RigExpert MATCH Advanced Upgrade License unlocks expanded features and tools that are not available with the Basic version. The Advanced License enhances your REU-MATCH Analyzer with tools and features for reliable measurements and advanced capabilities up to 230 MHz, ideal for HF and VHF bands. This unique upgradable architecture allows the REU-MATCH to evolve alongside your needs. This feature ensures that your investment remains relevant as technology and your requirements advance.
Not Yet Reviewed
$100.00
$80.00
On Sale
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!
( 29 )
$239.95
$169.00
On Sale
Alinco DR-735T VHF/UHF Transceivers
Alinco DR-735T VHF/UHF Transceivers feature eight full color LED backlights that enable you to customize your display colors! DR-735s let you assign different colors for different functions. These "beautifully simple" radios have fully independent VHF/UHF keys and dials to deliver true dual-band operation. The removable front panel can be remotely mounted or inverted for optimal speaker placement. DR-735 features include: * Full-duplex receiver enables simultaneous TX/RX within 144/440MHz bands as well as V/V and U/U receiver capability. Fully independent frequency, audio level and squelch knobs for right and left VFOs make it seem more like operating two monoband radios rather than a dual band transceiver. * Simply press the volume knob to select the VFO you wish to use for transmitting. * Cross-band repeater function available on all DR-735T radios. (Be sure to observe all regulations applicable to cross-band operation.) * Computer programmable with free software from Alinco. * "Set Mode" menus are divided into basic and advanced, allowing you to assign less frequently used modes such as auto power off or busy channel lockout to set and forget. * Large heatsink and quiet fan for stability while operating * Wide and narrow ceramic filters enable true narrow band operation * Two speaker ports located on the back of the unit allow you to separate signals by both right and left sides or by internal or external speakers using audio from a single external source. Additional conveniences include: * Easy repeater access: These radios feature manual shift and offset direction setting plus preset and programmable auto-repeater settings. Includes 4 tone-burst tones * Versatile memory functions: Include 1,000 memory channels in 10 banks, 100 right-only/100 left-only memories, 100 dual memories, 5 pairs of programmed-scan channels, and 2 call channels. * Easy-to-Read Display: Large LCD screen offers adjustable display brightness, color and contrast along with 6-character alphanumeric tags, a brightness timer that boosts light levels temporarily when keys are engaged and a "scan light" feature that increases brightness for two seconds when scanning stops. * Convenient Receiver Functions: Include popular functions such as pager (icon and beep tones), extended receive, aviation and utility monitoring on VHF and UHF frequencies, a variety of selectable channel steps, CTCSS/DCS capabilities for selective monitoring, a 10dB RX attenuator, sub-band mute, reception image rejection and auto-power-off. Advanced Transmitting Features: Valued by many seasoned operators, these features are part of the set mode menu that includes time-out-timer and busy channel lockout as well as an adjustable mid-power output level, microphone gain adjustment and cross-band repeat (T model only)*. Selectable Scan Modes: Choose from a variety of scan modes that include VFO, memory, programmed or priority scans with busy and timed modes, CTCSS/DCS tone detection and memory scans with "skip" and "favorite" settings. (Utility software required for priority scan setting.) Popular Features: Other popular features include single-band mode, a restore function that recalls set-mode settings even after a complete reset, five different reset modes (system, complete, VFO, memory and color resets), cable-cloning and utility software. Note: For additional information, please look at the files under the "Documentation" tab. Included equipment: * Microphone: EMS-79 DTMF (standard on "T" version) * DC power cable: UA38Y * Bracket Hardware Pack: ADFM78 Optional equipment: * Digital modulation unit: EJ-47U * Control head separation kit: EDS-30 * 8-pin microphone adapter: EDS-8 * USB Computer interface cable: ERW-7 Are you looking for a great dual-bander? Look no farther than one of these Alinco DR-735 VHF/UHF Transceivers from DX Engineering!
( 39 )
$345.95
$329.95
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
On Sale
WiMo PicoAPRS and VHF Transceiver with GPS Receiver
WiMo PicoAPRS and VHF Transceiver with GPS Receiver - The world's smallest APRS transceiver gets even better with the introduction of Version 4 of this great little device! As in previous versions, a TNC and a GPS receiver are still included with the addition of a VHF 2-meter handheld transceiver that includes features like a PTT button, microphone, speaker, stored memories, color display and much more! The PicoAPRS V4 is a complete packet radio transceiver with built-in TNC for APRS
( 9 )
$429.99
$343.99
On Sale
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers
Alinco DR-CS25T 1.25m / 222 MHz FM Mobile Transceivers are ultra-compact and come loaded with useful high-tech features that make the operation of this transceiver smooth and easy. Its large, color-selectable LCD display is easy to read and the multi-function back-lit handheld microphone with a DTMF keypad enables direct frequency entry and remote control. The DR-CS25T features excellent transmit/receive audio, 200 memory channels, frequency and channel scanning capabilities and more. Affordable and easy to use, the all-new DR-CS25T will offer everything you expect from a 222 MHz mobile transceiver. Alinco DR-CS25 Features: - Output power selectable 50W / 25W / 10W - PC-programmable 200 channel - Alphanumeric name tags - Wide variety of selective calling features - Built-In, 2-Tone/5-Tone, 51 CTCSS, 1024 DCS, 4 Tone-burst tones and DTMF / ANI decode - Large, bright LCD and easy-to-operate backlit microphone keys - Multi-function microphone enables direct frequency entry & remote control - Various scan modes, Key lock, Wide / Narrow operations and more! - Clean, clear Alinco audio
( 11 )
$269.95
$259.95
On Sale
CHANNELLOCK Cable Cutting Pliers
CHANNELLOCK coax cable cutters are the difference between cutting and crushing! These high quality cable cutters are designed to cut your coaxial cable cleanly--no crushing like diagonal side cutters! Your cable will be cleanly cut ready for stripping and connector assembly. CHANNELLOCK cable cutters are precision made of fine polished high carbon drop forged steel with closely mated cutters that hold their edge and broader handles for excellent leverage and comfort. These cutters can handle aluminum up to 4/0 gauge and soft copper cable up to 2/0 gauge. Wire like a professional with a set of CHANNELLOCK cable cutters.
( 21 )
$34.95
$31.95
On Sale
Alinco DJ-G46T Cross-Touch GMRS+FRS Hand-Held Radios
Alinco DJ-G46T Cross-Touch GMRS+FRS Hand-Held Radios are an excellent alternative to cellphones for communicating with someone nearby in various environments. These 5W weatherproof radios are GMRS repeater-ready with features such as hands-free VOX, keypad lock, voice guidance and a handy LED flashlight. Expected coverage is up to 2 miles or more when located in flat, noise-free environments. The coverage distance will become drastically reduced in urban and noisy environments and will depend heavily on the local environment; this distance is extendable with the use of a GMRS repeater service.
( 3 )
$119.95
$99.95