Availability
Clearance
Open Box
Gator Cases Rackworks Equipment Rack Shelves
A Gator Cases Rackworks Equipment Rack Shelf will support and mount equipment that is not built to be rack mountable. A wide variety of multi-purpose rack shelf configurations and depths allow you to customize your equipment case. Available shelf models include solid metal, pre-drilled with many holes for equipment mounting and several versions have elongated slots for ventilation. All Rackworks Equipment Rack Shelves are made of cold rolled 16 gauge steel with a black powder coated finish. These are rugged metal shelves to accommodate all types of equipment. They may be mounted for use as a tray or inverted and used as a platform. Customize the configuration of your case with Gator Cases Rackworks Equipment Rack Shelves from DX Engineering.
( 3 )
$84.99
$67.99
Clearance
Open Box
Astron Power Supplies
When you are in need of reliable DC power supply, look no further than Astron Power Supplies. This line of linear DC power supplies are made of heavy-duty, high-quality materials. Astron has your power requirements covered with a wide variety of voltage and amperage outputs and case styles with and without meters. Even their power supplies with only cigarette lighter sockets or with Anderson Powerpoles on the front panel still have DC output terminals on the rear panel. That's convenient! Astron linear-type transformer power supply features include: * Solid state electronically regulated * Fold-back current limiting protects power supply from excessive current and continuous shorted output * Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L * Tight regulation and low ripple at low line input voltage * Heavy-duty heat sink (70A models add a low noise fan) * Three conductor power cord * All metered units feature backlit meters At DX Engineering, we bring you only the best - Astron Power Supplies do not disappoint! Performance specifications: * Input Voltage: Most models are built for 105 to 125 VAC input. Some "220" models are built for 210-250 VAC input. * Output Voltage: As Listed * Ripple less than 5 mv peak to peak (full load and low line) At DX Engineering, we bring you only the best - Astron Linear Power Supplies do not disappoint! For reliability and convenience, look to Astron Power Supplies from DX Engineering.
( 127 )
$106.95
$96.26
Clearance
Open Box
Yaesu Headsets and Earpiece-Lapel Microphones
Yaesu Headsets and Earpiece-Lapel Microphones bring HT audio convenience from your belt to your ear and collar. Featuring specialized connectors on coiled cords with swivel clips, light-touch PTT switches and privacy listening earphone, these mics are a must when you need to use your handheld for extended period of time without disturbing others. The convenience of talking and hearing quickly and easily without pulling the HT off of your belt cannot be beat! Get your Yaesu Headsets and Earpiece-Lapel Microphones right here at DX Engineering.
( 15 )
$84.99
$80.74
Clearance
Open Box
Chelegance Replacement Parts for JPC-7 and JPC-12 Antennas
Chelegance Replacement Parts for JPC-7 and JPC-12 antennas allow you to replace lost or damaged components of your portable antenna system. These replacement parts are the same ones that came with your antenna and are genuine OEM replacement parts.
( 2 )
$86.99
$73.94
Clearance
Open Box
Chelegance JKEY-25 Portable Straight Keys
Chelegance JKEY-25 Portable Straight Keys are lightweight, entry level straight keys that are ideal for beginners or for portable operation. Made of lightweight aluminum, and weighing at just 325 grams, this key is light enough to use portable but sturdy enough to use in the shack. Add a strap and this key can be used as a leg key. The JKEY-25 comes with a 36 in. long cable terminated in a mono 1/8th in. (3.5mm) connector and a ¼ in. adapter to convert the connector for radios that need the larger plug. Simply plug the key into the key jack on your radio and you're off and running. Additional Feature and Specifications: • Frame Material: 7075 Aviation Aluminum Alloy • Color: Anodized Black • Contact Material: Pure Flat Brass • Cable Length: 36 in. long • Connector: 1/8th in. (3.5mm) Mono Plug • Dimensions: 5.9 in. x 3.5 in. x 2.75 in. (150mm x 90mm x 70mm) • Net weight: 0.72 lbs. (325g) • Included Accessories: 1/8th in. to 1/4 in. mono adaptor
Not Yet Reviewed
$70.99
$60.34
Clearance
Open Box
Par EndFedz® Antennas
Par EndFedz® Antennas are End Fed Half Wave (EFHW) antennas with the match box coax connection at the end of the wire, for convenient and quick stealth portable operations. These single-band and multi-band antennas can be mounted horizontally, vertically, or as a sloper. No ground plane or counterpoise is needed so portable operation could not be easier. Simply hang the far end from a tree limb or send the wire out a hotel room window or balcony. You can use a telescoping fiberglass mast to get the antenna really high in the air and the supplied end insulators the installation easy. Stealth operation in CC&R and HOA antenna restricted locations is simplified. Their all-black construction makes them difficult to see. Each Par EndFedz® features a UV-resistant black ABS plastic housing with a support rope attachment hole that encloses a matching network to allow the antenna to be fed with standard 50 ohm coaxial cable with a PL-259 (UHF male). All hardware is stainless steel and the SO-239 (UHF female) connector is silver plated and has a PTFE dielectric. The antenna wires are either 18 or 26 AWG stranded Copperweld® with 200 pound breaking strength and a tough, 100% UV stable black polyethylene jacket. One end of the antenna wire has a #10 solder lug making attachment to the matching network feedpoint simple and easily replaceable, if necessary. Standard single and multi-band versions handle 100 or 200 watts and higher power versions handle 300 watts. Lightweight QRP PolyStealth models handle 25 watts and are ideal for portable operation because they are lightweight; the MKII model weighs only 8 ounces and the Trail Friendly model weighs only 3.5 oz. Par EndFedz® Antennas require no counterpoise or extra conductors. The EF-ALLBAND-KW model, about 133 ft. in length, covers eight bands, 80 through 10 meters. The ALLBANDKWJR is 74 ft. in length and operates on five bands, 80-10 meters. The 64 ft. EF-40-10-KW operates on four bands. All three models handle up to 1000 watts SSB/CW and 250 watts AM/Digital Modes. The need for an external tuner may vary based on the antenna model selected and the desired operating band. The manufacturer refers to these antennas as "End-Fed Dipoles" based upon the assertion that a "half-wave radiator is a dipole." This is a variant of the classic definition of a dipole which is a center-fed antenna with two radiating legs running in opposite directions from the feed point. Additional claims about the EFHW state that end feeding a half-wave "can energize the radiator 'nearly' as well as a center-fed." Recent anecdotal measurements indicate that the EFHW radiates about 70% as well as a traditional center-fed dipole. More information is available at each Par EndFedz® model listed below. Order yours from DX Engineering.
( 231 )
$74.99
$67.49
