Availability
Clearance
Scratch & Dent
Toptek Communications PA-180V VHF 138-174 MHz 180W Power Amplifiers
Toptek Communications PA-180V VHF 138-174 MHz 180W Power Amplifiers are very stable Solid State VHF linear amplifiers designed for Amateur Radio 2 Meter FM, SSB and CW operations and Commercial communications. Dual MOSFET push-pull PAs provide full RF output of 180 watts with only 5 watts input, making this amplifier* useful for both handheld and compatible mobile VHF transceivers. Mode, RX preamp, SWR meter and Power Output Settings of 60, 100, 140 and 180 watts are front panel selectable. The front panel multi-color 8 LED string serves to indicate output power settings, output power, SWR and Error. A unique shroud enables the oversize fan to quietly cool this compact amplifier for safe long-term operation at full power. Multiple protection circuits, a 21dB Receive Low Noise Amplifier (LNA), RF sense or PTT keying (required for SSB/CW) and thermostatically controlled fan are some of the great features of this Toptek VHF amplifier. True 50 ohm Type-N RF connectors maintain the highest efficiency to the feedline and the antenna. NOT compatible with DMR and P25 modes. *Requires 13.8 VDC @ 30A max. (External power supply not included).
( 8 )
$449.99
$404.99
Scratch & Dent
Samlex Desktop Switching Power Supplies
These high-efficiency Samlex Desktop Switching Power Supplies provide an extremely well-regulated DC output voltage of 13.8 Volts. Long gone are the days of RF noise producing switching supplies. Samlex advanced switch-mode DC power supplies were specifically designed for use with land mobile radio, and now find use in many Amateur Radio, electronics, hobby, broadcasting and commercial applications. They produce clean, reliable power and are extremely well filtered to suppress unwanted noise and RFI. Samlex Desktop Switching Power Supplies are small and light weight. Safety features include over-current, short-circuit, and over-voltage protection. 120 Vac models have also earned FCC compliance and UL listing to both USA and Canadian safety standards. 230 Vac models have European certification and are RoHS compliant. The model SEC-1235P-M is a universal input model, 100-240 VAC, 50-60 Hz, and 13.8 VDC, 30A continuous output with backlit front panel meters. Note: For additional product information, please look at the files under the "Documentation" tab. When you consider purchasing a new desktop supply, contact DX Engineering for one of these high-quality Samlex Desktop Switching Power Supplies!
( 223 )
$221.40
Clearance
Scratch & Dent
Ciro Mazzoni Loop Antenna Replacement Parts
Ciro Mazzoni Loop Antenna Replacement Parts are stocked for those who need to update or reinstall their Loop Antenna by I3VHF. Parts are all original; exactly the same supplied with each model, MIDI, BABY and STEALTH models, including Actuator motors and Isolator Arms. The updated, current model ATU 2.0 replacement (MZZ-COM1001) is the same as supplied with all three new antennas. So are the Universal AC Power Supply (MZZ-COM1002) and the USB Keyboard (MZZ-COM1003). The Stainless Steel Mast Clamp and hardware (MZZ-COM1005) fit the MIDI or the BABY Loops. The MZZ-BLA1010 aluminum adapter plate is supplied with BABY Loop Tripods, available here as a replacement. Order Loop Antenna by I3VHF Replacement Parts here at DX Engineering.
( 7 )
$799.99
$439.99
—
$719.99
Clearance
Scratch & Dent
4O3A 8xAB Antenna Switches
4O3A 8xAB Antenna Switches integrate eight independent A/B switches into a single compact unit, enabling seamless switching between multiple antennas and radios. When paired with two 403A Antenna Genius switches (O3A-40-AG8X2 or O3A-40-AG8X2-N), it forms a powerful 8×4 antenna matrix, allowing up to eight antennas to be routed to four radios with exceptional isolation. Built with the needs of high-power stations in mind, the 8xAB Switch delivers robust performance, intuitive operation, and a clean, maintainable installation. The primary motivation behind the 8xAB switch is the integration of two Antenna Genius smart switches into an 8×4 Super Switch.
Not Yet Reviewed
$775.99
$465.59
Clearance
Scratch & Dent
DX Engineering Replacement TW Antenna Structures
DX Engineering Replacement TW Antenna Structures are direct-replacement structures for the top (DXE-TW-BAS-TOP) or bottom (DXE-TW-BAS-BTM) of your DX Engineering TW Adventurer, Explorer, Globetrotter or Solo Explorer compact vertical dipole antennas. No one ever wants their antennas damaged, but accidents do happen; especially with antennas as portable as these TW Series antennas. Made of high-quality black powder-coated aluminum, these replacement parts are also compatible with older TW portable or stealth antennas. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. If you have need of a replacement top or bottom section of your TW antenna, order DX Engineering Replacement TW Antenna Structures and get your TW antenna back in great shape! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$128.99
—
$139.99
$77.39
—
$83.99
Clearance
Scratch & Dent
Gator Cases Rackworks Equipment Rack Shelves
A Gator Cases Rackworks Equipment Rack Shelf will support and mount equipment that is not built to be rack mountable. A wide variety of multi-purpose rack shelf configurations and depths allow you to customize your equipment case. Available shelf models include solid metal, pre-drilled with many holes for equipment mounting and several versions have elongated slots for ventilation. All Rackworks Equipment Rack Shelves are made of cold rolled 16 gauge steel with a black powder coated finish. These are rugged metal shelves to accommodate all types of equipment. They may be mounted for use as a tray or inverted and used as a platform. Customize the configuration of your case with Gator Cases Rackworks Equipment Rack Shelves from DX Engineering.
( 3 )
$84.99
$59.49
Clearance
Scratch & Dent
mAT TUNER mAT-1500PROII Automatic Antenna Tuners
mAT TUNER mAT-1500PROII Automatic Antenna Tuners are multi-purpose high power tuners that can match almost any transmitter and amplifier. Providing Frequency coverage from 1.8 to 30MHz and with two antenna outputs, the mAT-1500PROII also provides antenna switching. Depending on how cables are connected, the tuner will operate in three modes: Icom, Yaesu or General, General mode also allows for remote operation of the tuner. The front panel has a 4.3 inch high resolution display that provides information as to the current operating mode, forward power in both PEP and Average power, with a bar scale that can show three ranges: 15W, 150W, and 1500W; in addition to the power output the antenna system SWR is also shown along with current toggleable settings such as antenna output selection, PTT status, which of the four buttons (LUP, LDN,CUP or CDN) was pressed last, and finally the current status of the tuner. The front panel also has 6 additional buttons for controlling if the PTT signal is passed from the tuner to an amplifier (effectively putting the amplifier in bypass), an online button which controls the tuner being in an online or bypass state, a Tune button which starts a tuning cycle when the tuner is in General mode, a range button which changes the displayed scale of the RF indicator on the display, an antenna select button which allows for changing the antenna jack that is used on the tuner, and finally, a power and screen background setting which allows for tuner power to be cycled in General mode as well as the screen brightness and background color to be changed (if the tuner is in Yaesu or Icom mode, the power function of this button is not used.) The rear panel features 3 SO-239 jacks, one for RF In, and two antenna connections. a ground lug and a handful of connection ports for interfacing with the radio. If the user wants the tuner to follow the frequency of the radio with no additional input, the user can connect the appropriate control cable (sold separately) to the radio and the Icom/Kenwood or Yaesu jacks on the back of the tuner. In these modes, the tuner will receive power from the radio and will power up with the radio and not require a dedicated power connection. In general mode, a connection to the DC in jack is required. A PTT in and Out jack both allow for the transceiver to send a PTT signal to the tuner and for the tuner to pass that PTT signal on to the amplifier. Additional Feature and Specifications: Frequency Coverage: 1.8 to 30 MHz Power Rating: 1500W(SSB), 800W(Data) Tuning Power: 5-15W Tuning Time: < 8 seconds (Programmed), 0.1 seconds (from pre-saved frequencies in memory) Operating Temperature: 14° F - 140° F Frequency memories: 16,000 Power Requirements: 12-14VDC, 2.0A Dimensions: 11.420"x9.567"x3.071" (H x L x W) Weight: 7.72 pounds
Not Yet Reviewed
$799.95
$719.96
Clearance
Scratch & Dent
Samlex DC/AC Modified Sine Wave Power Inverters
Samlex America DC/AC Modified Sine Inverters are ideal for powering tools, water and air pumps, incandescent lighting systems, and kitchen appliances from your car, truck, boat, RV, solar energy system, or battery bank. Use them anywhere that does not require a "pure" sine wave. Generally speaking, modified sine wave inverters are more economical than their "pure" sine wave counterparts. Whether you are looking for a tiny 100 Watt inverter or a substantial 3,000 Watt unit, you'll find that the lineup of economical Samlex America DC/AC Modified Sine Inverters has just the right product to suit your needs!
Not Yet Reviewed
$131.40
$118.26
Clearance
Scratch & Dent
Phonema Miranda S Speakers
Phonema Miranda S Speakers are designed to deliver high-quality audio with special attention to the intelligibility of SSB signals. The high-quality wide range driver is specifically positioned into a custom designed medium density fiber cabinet which is lined internally with a variety of specially selected acoustical foam materials. The resulting sound of Miranda S is clear and sharp, with a frequency response that makes it easy to understand both voice and CW signals. Bass is present and well controlled when listening to broadcast signals. The midrange curve suits voice frequencies so that they stand out above the QRM, all with the warmth of a hand-crafted wooden speaker that reduces listener fatigue. The Miranda S is a gorgeous looking and great sounding speaker that is perfect for many new and old transceivers. This 8-ohm speaker is a convenient size that matches the listed rigs, but it will work for virtually any radio. The rich and articulate sound is perfect for listening to your transceiver or receiver. Miranda S Speakers offer these features: * Speaker Cabinet Material: MDF (medium density wood fiber) * Internal Materials: Acoustic Foam AG150 and Basotect * Pull-out Bail under the front to adjust height and angle to match radio * Power Handling: 10 w * Impedance: 8 ohms * Frequency response: 80 - 18,000 Hz * Sensitivity: 83 dB * Driver protection: IP64 * Input, rear panel: Mono 3.5mm jack * Dimensions (WHD): 6.02 x 3.98 x 10.04 in. (153 x 101 x 255 mm) * Weight: 3.48 lbs. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Phonema has gained an excellent reputation for quality and value. Order Phonema Speakers from DX Engineering and discover the difference a quality speaker can make!
( 7 )
$241.99
$217.79
Clearance
Scratch & Dent
OM Power OM-2000A+ HF Plus 6 Meter 1,500W+ Auto Tune Linear Amplifiers
OM Power OM-2000A+ HF Plus 6 Meter 1,500W Auto Tune Linear Amplifiers (OMR-OM-2000A) features one FU-728F Ceramic Tetrode tube capable of providing stable, full legal limit all-mode output power and frequency coverage of the Amateur bands ranging from 1.8 to 29.7MHz plus 50MHz. CW ops will enjoy QSK (full break-in) with the silent T/R vacuum relay. The Intuitive 4.3-Inch color Touch Screen and front panel indicators allow you to stay informed about the operational status of the amplifier and effortlessly gain access to advanced features and settings. Full band change or frequency reading compatibility is built in for modern transceivers and RF Sense band change supports legacy transceivers. The OM-2000A+ supports automatic antenna switching for up to 10 antennas. Remote Control operation is supported via LAN and available PC program download. The OM-2000A+ is considered one of the most compact and lightest 1500W+ HF automatic tuning amplifiers on the market.
( 4 )
$7,199.99
$5,543.99