Availability
Manufacturer Rebate
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 126 )
$2,099.95
Manufacturer Rebate
ICOM IC-7760 HF/50MHz All Mode Base Transceivers
ICOM IC-7760 HF/50MHz All Mode Base Transceivers feature an ALL NEW innovative shack style consisting of a remote control head and separate RF deck, connected with a commercially available control (LAN) cable. This concept increases the flexibility of your station installation, making more space available on the desktop by placing the RF deck in an area closer to the antenna feed point. In addition to the direct connect feature, control head to RF deck, allows you to utilize your home network to make any tabletop your shack, and a PC is not required!
( 10 )
$6,999.95
Manufacturer Rebate
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A PLUS VHF/UHF Multi-Function D-Star Handheld Transceivers build upon its popular predecessor (ID-52A) and brings with it updated features that will delight amateur enthusiasts both at home and in the field. This upgraded handheld transceiver now features Enhanced Bluetooth® connectivity, which will allow you to connect to an Android device in Terminal and Access Point Modes, Dual operation of Terminal Mode and simplex/repeater operations and finally, an Updated USB-C charging/data port for faster connections and charging. This feature packed transceiver will allow you to enjoy portable operations like you've never seen before. The large 2.3 in. 230 X 280 pixel color display offers more information, an improved interface, with an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750mW of output so you never miss a contact. Additionally, the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. New Features: - Enhanced Bluetooth® – Connect your Android™ in Terminal and Access Point Modes - Dual operation of Terminal Mode and simplex/repeater operations - Updated USB-C charging/data port for faster connections and charging
( 6 )
$749.95
Manufacturer Rebate
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 3 )
$3,999.95
Instant Rebate
Manufacturer Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 127 )
$1,399.95
Icom IC-7110 HF/VHF/UHF All Mode Transceiver Reservation
Introducing the new Icom IC-7110, a versatile all-band, all-mode transceiver engineered for Amateur Radio operators who demand premium performance across every operating environment. Covering HF, 50 MHz, 144 MHz, and 430/440 MHz bands with support for SSB, CW, RTTY, AM, FM, and D-STAR digital voice operation, the IC-7110 delivers powerful 100-watt output on HF and 50 MHz and 50 watts on VHF/UHF. Its advanced dual-receiver architecture enables true HF/VHF or HF/UHF dual-watch capability, allowing operators to monitor multiple bands simultaneously while maintaining independent operating modes for each receiver. At the heart of the IC-7110 is a large 4.3-inch color touchscreen display featuring a real-time spectrum scope and waterfall display. Instantly identify open frequencies, monitor band activity, and visually track signal movement across the band with exceptional clarity. Whether chasing DX, contesting, or monitoring local repeaters, the intuitive display keeps critical operating information within easy reach. Digital mode enthusiasts will appreciate the IC-7110's simplified FT8 setup, which automatically configures the radio for FT8 operation with a single preset selection. Additional customizable presets provide flexibility for future digital modes, streamlining station setup and reducing configuration time. CW operators benefit from the integrated CW decoder technology derived from Icom's acclaimed IC-7300 series, offering adjustable decoding parameters to optimize performance under varying band conditions. The IC-7110 also delivers comprehensive D-STAR functionality, including DR mode, Terminal Mode, Access Point Mode, DV repeater monitoring, and even picture transmission and reception directly from the radio. Built-in Wi-Fi® and Bluetooth® connectivity provides seamless integration with smartphones, computers, and wireless headsets, while enabling convenient online firmware and repeater database updates. Designed for today's connected Amateur Radio operator, the Icom IC-7110 combines advanced digital features, powerful multi-band coverage, intuitive touchscreen operation, and state-of-the-art spectrum analysis tools into a compact, modern transceiver ready for home, portable, mobile, and emergency communications applications. Whether you're exploring HF DX, local VHF/UHF activity, digital modes, or D-STAR networking, the IC-7110 is built to keep you connected wherever your operating adventures take you.
Not Yet Reviewed
$35.00
On Sale
ICOM IC-V3500 2M VHF FM Mobile Transceivers
Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications
( 10 )
$239.95
$234.95
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
On Sale
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!
( 29 )
$239.95
$169.00
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$139.95
$129.95
Manufacturer Rebate
ICOM IC-PW2 HF/50 MHz, ALL Band 1kW Linear Amplifiers
The ICOM IC-PW2 HF/50 MHz ALL Band 1 kW Linear Amplifier is a high performance, multi-function linear amplifier and is considered one of the key pieces of equipment for keen competition in DX hunting and contesting. Featuring high power and full duty cycle operation, the IC-PW2 uses new 65V LDMOS power transistors (MRFX1K80HR5) and a high-efficiency power supply to achieve a full 1kW output with a 200VAC Input. The IC-PW2 instantly operates at full power once turned on. Use the IC-PW2 for long contest hours or full-duty FT8 operation. Experience linearity and clean transmission with Digital Pre-Distortion (DPD) Technology with IC-7610. This technology corrects the signal distortion from the IC-PW2, by applying inverse distortion to the output signal from the IC-7610 exciter in advance
( 5 )
$5,499.95
Manufacturer Rebate
ICOM ID-50A VHF/UHF Multi-Function D-Star Handheld Transceivers
The ICOM ID-50A is a compact, dual band 2m/70cm digital transceiver that brings the fun of the D-STAR to life and includes functions to enhance your QSO experience making the ID-50A the perfect travel companion. The Band Scope and Waterfall displays can visually show active channels with a wide span and timeline, making it easy to find active channels by sight. The Dual-Watch function doubles QSO opportunities to monitor VHF/VHF, VHF/UHF, and UHF/UHF bands at the same time and can receive both FM and Air bands. The built-in GPS receiver displays the current grid square information and this GPS position data can be used for Position Auto Reply, Near Repeater Search and GPS log functions.
( 12 )
$499.95
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
Clearance
ICOM ID-52A VHF/UHF Multi-Function D-Star Handheld Transceivers
ICOM ID-52A VHF/UHF Multi-Function D-Star Hand-Held Transceivers allow you to enjoy portable operations like you've never seen before. The large 2.3 in. color display offers more information, an improved interface, and an industry-first color waterfall band scope for a VHF/UHF portable. The integrated speaker provides a booming 750 mW of output so you never miss a contact—and the integrated Bluetooth allows for connectivity with a wide variety of external audio devices. * Key Features: - Integrated GPS - Micro USB port for PC connectivity and battery charging - Micro SD card slot - DR mode for D-STAR operations - Dualwatch with new DV/DV mode - IPX7 submersible rating - Transflective screen layer for improved visibility in direct light - VHF/UHF Airband and FM broadcast receive - Improved heat dissipation efficiency - QSO log in CSV data format - Voice recorder function Larger radio, larger color display, and louder audio. The ID-52A is much more than a replacement to the ID-51A, it's a new way of communicating! An industry-first, a hand-held with a full color waterfall display and the ability to send photos over the D-STAR network. The ID-52A continues to support D-STAR functions with DR mode for easy access to local repeaters based on the internal GPS information, as well as Terminal and Access Point modes. Additionally, the radio weighs a mere 10.4 oz. (295g) and has an 80 percent increase in overall volume to hear in loud conditions. Receive Modes - Dualwatch allows for the monitoring of two frequencies or bands simultaneously. VHF/VHF, UHF/UHF and VHF/UHF monitoring are all supported along with the new ability to decode two DV signals simultaneously. Quickly call from either the main or sub bands on the fly. Enhanced UHF capabilities allow for monitoring of Military Air Bands from 225 to 374.995 MHz, and the wideband receiver allows for listening to nearby broadcast FM stations. Bluetooth Enabled Features - The ID-52A incorporates common Bluetooth profiles for audio and data controls, which provide new mobility in the palm of your hand. Icom leads the way by pairing either Icom or third-party headsets for voice communications. The optional VS-3 Bluetooth® headset with the large PTT button allows for hands-free operation. Additionally, users can program 3 buttons to improve operability and mobility. Download the RS-MS1A Remote Control Software on Google Play to change operating frequencies, send texts, and more! Integrated GPS/GLONASS Receiver - With a GPS lock, use the D-PRS mode to send location data, as well as show received station location, distance, and direction. The ID-52A also displays current Grid Square information. This GPS position data can be used for the Position Auto Reply, Near Repeater Search and GPS log functions. Icom ID-52A Specifications (partial, subject to change): * Output Power: 5W / 2.5W / 1.0W / 0.5W / 0.1W * Wideband Receiver Frequencies: 88 – 174 MHz, 225 – 479 MHz * TX Frequencies: 144-148, 440-450 MHz * Channels: 1000 * Bluetooth: Built-in * GPS: Built-in * Waterproof Rating: IPX7
( 26 )
$649.95
$589.95
Manufacturer Rebate
ICOM IC-R15 Wideband Handheld Receivers
ICOM IC-R15 Wideband Handheld Receivers allow both the beginner and experienced user alike to discover the exciting world of radio reception. The IC-R15 covers a wide frequency range from 108 - 500 MHz, allowing you to receive a diverse array of radio signals, whether it's VHF Aeronautical Radio in AM, Amateur Radio on 2m and 70cm, Railway, Marine, or regional broadcast stations in AM/FM and Wideband FM (WFM) from 76 – 500 MHz. The versatile and reliable IC-R15, with its state-of-the-art technology and elegant design sets new standards and ensures that even users with minimal experience can quickly get on the air.
( 1 )
$559.95
On Sale
Open Box
ICOM IC-2730A VHF/UHF FM Transceivers
ICOM IC-2730A VHF/UHF FM Transceivers provide VHF/VHF, UHF/UHF simultaneous receive capability in addition to VHF/UHF receive. These transceivers have a built-in duplexer, so you can use a 144 and 430 MHz dual-band antenna without needing an external duplexer. Main dials, volume, squelch knobs and primary control buttons are symmetrically laid out for each band. IC-2730A transceivers employ a durable PA module and deliver 50 watts of high power analog operation on the 2-meter and 70cm bands. CTCSS and DTCS tones are built-in for quiet stand-by and repeater access. CTCSS split tone function allows you to set CTCSS tones separately for repeater uplink and downlink. A single DTCS code may be polarity reversed independently for repeater uplink or downlink. IC-2730A receivers cover 118-174 and 375-550MHz. You will be able to listen to aviation, marine, weather channels and other utility communications. The display size of ICOM's IC-2730A is 1.5 times larger than ICOM's other comparable models. Frequency display and channel names are larger, and the white backlight provides higher contrast. Here are more ICOM IC-2730A features: * Cross band repeater capability * CS-2730 Free PC programming software downloads * Versatile scanning capability * Squelch delay and squelch attenuator * Sub band auto mute function * Auto repeater function * Auto power off * TX time-out-timer * 16 DTMF auto dial memories * Weather channel receive with weather alert (USA version only) * CI-V remote control capability (through the optional OPC-478UC) Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * HM-207 remote control microphone * Controller cable, OPC-837 * Microphone hanger * DC power cable, OPC-1132 * Spare fuse NOTE: Optional MBA-4 bracket mounts the Control Head to the main unit. These new dual-band FM transceivers have advanced features at a very affordable price. Purchase ICOM IC-2730A VHF/UHF FM Transceivers from DX Engineering for the best in quality and customer service!
( 144 )
$309.95
$294.45
Manufacturer Rebate
ICOM IC-7300 HF Plus 50 MHz Transceivers
ICOM IC-7300 HF Plus 50 MHz Transceivers employ a new-technology real-time touch-screen spectrum scope that leads its class in resolution, sweep speed and dynamic range. While listening to received audio, you can check the real-time spectrum scope and quickly move to another signal. When you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune to the desired signal. The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of IC-7300 radios and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the real-time spectrum scope. The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either transmit or receive audio may be displayed on the FFT scope, with the waterfall function and the oscilloscope. The large 4.3 in. color TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents. IC-7300 transceivers employ an RF direct-sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading-edge technology; creating a new era in amateur radio. The new "IP-plus" function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. IC-7300 transceivers' RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals. IC-7300's have 15 discrete RF band-pass filters. The RF signal is passed through only one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters. The built-in antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function allows a wide range of temporary antennas to be tuned. NOTE: Do not use the Enforced Tuning function except in case of an emergency. Transmitter output power may be automatically reduced. IC-7300 transceivers can store various contents into an SD card, such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Updated personal and firmware data can also be stored to the SD card for easy setting. To offer superior sound quality, a new speaker unit has been incorporated and is designed into the aluminum die-cast chassis; not just squeezed in as a necessity. Other IC-7300 features include: * HM-219 hand microphone supplied * Large, effective cooling fan system * Multi-function meter * 101 memory channels (99 regular, plus 2 scan edges) * Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed) * CW functions: Full break-in, CW reverse, CW auto tuning Note: For additional information, look at the files under the "Documentation" tab. The innovative features included in ICOM's IC-7300 offer tremendous advantages and represent a paradigm shift for its modest price point. ICOM says of its 7300 that "The Real HF Fun Starts Here." Order one of their ICOM IC-7300 HF Plus 50 MHz Transceivers and discover the fun to be had with leading-edge technology transceivers from DX Engineering!
( 553 )
$1,039.95
On Sale
ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers
If you haven't yet heard of the ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers, then we can tell you that ICOM is at it again! IC-7100 transceivers introduce another amateur radio first. The radio control head features a large, multi-function, "touch screen" Dot-Matrix LCD display! This is an important feature because the controller's display not only provides information, but is also your control portal to the IC-7100's feature settings and menus. Breaking the basic rule that a radio faceplate must be vertically flat, the IC-7100's control head is sloped for the optimal viewing angle for the LCD display! The large touch screen also provides ample spacing for big fingers! ICOM even allowed plenty of room to have a large internal speaker, along with a jack for a CW key, a headphones/speaker jack, a microphone jack, and a control cable connection. IC-7100 base/mobile transceivers provide D-STAR (Digital Smart Technology for Amateur Radio) and DV (Digital Voice) mode and low speed data communication on the 2 meter and 70 centimeter bands. The D-STAR DV mode has loads of advantages over the analog FM mode: Digitally modulated clear voice; 950 bps of simultaneous data transfer; D-STAR individual calling using YOUR call sign, and access to the worldwide D-STAR repeater network linked via the Internet, just to name a few. The latest 32-bit floating point DSP (Digital Signal Processing) supports many digital processing features, such as a digital IF filter, twin PBT (Pass-Band Tuning), and manual notch filters. Of course, those high-grade digital processing features work on all ham bands from HF through the 70cm band. When considering a new all-band all-mode D-STAR equipped rig, keep these ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers from DX Engineering in mind! Just look at these features! * All-mode operation: USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) * Digital voice (DV) and data on VHF/UHF D-STAR * All bands 160 meters through 70cm (except 1.25m) * Separate control head with separation cable * Includes tactile tuning dial and direct frequency entry * 2-100W 160 through 6m, 2-50W 2m, 1-35W 70cm * Built-in SD Card Slot for voice storage and data cloning * Dual DSP chips deliver versatile digital processing performance * Built-in RTTY demodulator and decoder * Multi-function meter * SWR graphic display * DSP controller/RF speech compressor * Total of 505 memory channels * Voice recording and playback functions * ± 0.5ppm superior frequency stability * Optional RS-BA1 IP remote control software * ICOM CI-V interface capability Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand microphone * DC power cable * Electronic keyer plug * Spare fuses * Key plug * Accessory cable * Control head separation cable
( 95 )
$1,199.95
$838.95
On Sale
ICOM IC-905 VHF/UHF/SHF All Mode Base/Portable Transceivers
ICOM IC-905 VHF/UHF/SHF All Mode +ATV Base/Portable Transceivers are 10 W QRP 144/430/1200/2400/5600 MHz All Mode +ATV Base/Portable Transceivers that hold the distinction of being the first in the industry to offer the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). The IC-905 offers all common operating modes - SSB and CW, AM/FM, and full D-Star functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz and 0.5W with the optional 10 GHz module.
( 3 )
$3,199.95
$2,699.95
Clearance
ICOM Transceiver Plug-In Modules
ICOM transceivers have a plethora of built-in features. But, the fun doesn't have to stop there, with their line of Transceiver Plug-In Modules that add additional capabilities, including, Bluetooth Units, voice synthesizers, decoders, and D-STAR digital units.
( 13 )
$101.99
$76.49
Clearance
ICOM Mobile Transceiver Mounting Brackets
ICOM Mobile Transceiver Mounting Brackets provide for the mounting of your faceplate and/or radio unit for easier viewing and use. Sturdy metal brackets offer secure mounting. Many ICOM accessory mounting brackets are available individually or as a kit with a separation cable. Some brackets reuse original hardware supplied with the new radio and are supplied as brackets, only. Remote mount your control head and your main mobile transceiver units with help from ICOM Mobile Transceiver Mounting Brackets from DX Engineering.
( 58 )
$41.99
$31.49
Clearance
ICOM Transceiver Carrying Handles
Tote around your transceiver with ICOM transceiver carrying handles. These add-on handles provide a convenient carrying handle to get a better grip on your ham radios. Be ready to grab and go with ICOM transceiver carrying handles.
( 24 )
$34.99
$26.24
Clearance
ICOM Handheld Rapid Desktop Chargers
ICOM Handheld Rapid Desktop Chargers allow drop-in convenience for the busy handheld radio user "on the go." These charging units quickly recharge the battery over a shorter period of time for a speedy recharge turnaround. Just drop your radio into the charger and before you can say "Hiram Percy Maxim," you'll be all set to enjoy it again! Durable, dependable, and easy to use, ICOM Handheld Rapid Desktop Chargers are your best choice for quickly topping off the batteries in your ICOM handheld radios!
( 22 )
$82.99
—
$93.99
$62.24
—
$70.49
Clearance
Scratch & Dent
Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceivers
The Icom ID-5200A VHF/UHF Dual Band Digital Mobile Transceiver is a flagship Icom dual-band transceiver designed for operators who demand advanced functionality, exceptional visibility, and intuitive control. Featuring a large 4.3-inch full-color touchscreen display, the same used in the IC-705 and IC-7300MKII, independent dual-band tuning, volume, and squelch controls, and the industry's first mobile transceiver waterfall display, the ID-5200A allows operators to monitor signal activity, band conditions, and frequency availability with remarkable clarity. True dual-band simultaneous reception supports FM/FM, FM/DV, and DV/DV operation, enabling users to monitor two D-STAR repeaters simultaneously or follow multiple communications at the same time. Enhanced D-STAR capabilities include Terminal Mode, Access Point Mode, DV Repeater Monitor, and image transmission and reception, while built-in Wi-Fi® and Bluetooth® connectivity provide seamless integration with smartphones, PCs, and internet-based operation. Additional features such as the Memory Scope function, microSD card support, automatic display brightness adjustment, Airband reception, USB Type-C connectivity, and planned APRS® support via future firmware updates make the ID-5200A a versatile and future-ready mobile transceiver. Flexible mounting options, including vehicle brackets, desktop stands, AMPS-pattern mounting compatibility, and tripod mounting support, allow users to install the radio in virtually any operating environment with ease. Important: Specifications and features are based on pre-release manufacturer information and are subject to change without notice. Final product specifications may vary from those shown.
( 2 )
$999.95
$899.96