Availability
Clearance
DX Engineering Rope Hardware Kits
DX Engineering Rope Hardware Kits are exactly what you need for all kinds of antenna projects that use support rope. Designed especially for use in conjunction with Mastrant Antenna Support Rope, these rope hardware kits provide just the right size pulleys, shackles, rope clips, duplex clips, carabiners, thimbles and quick links to facilitate fast and easy rigging, raising and lowering of wire antennas and guying of vertical antennas and antenna supports. They're great for experimenters, SWLs and Radio Amateurs who need to frequently adjust or "tinker" with their antennas. When used with new wire antenna installations, these products and Mastrant Antenna Support Rope allow for easy trimming or retuning of mono and multiband dipoles, end-feds, slopers and all types of wire antennas. Just lower, trim, and raise your antenna again until it's just right. For vertical antennas and support masts, use these kits for an installation that can be adjusted and disconnected easily, without having to constantly re-tie knots and deal with tangled excess rope. These kits feature stainless steel and metal-alloy parts for excellent durability and weather resistance. They will last a very long time. Are you raising a wire or vertical antenna or mast, or are using support rope on another project where strength and convenience are equally important? Consider using Rope Hardware Kits from DX Engineering for a professional looking project that really is stronger and is SO much easier to work on!
( 30 )
$30.99
—
$65.99
$20.14
—
$42.89
Clearance
DX Engineering TW Antenna Band Jumpers
DX Engineering TW Antenna Band Jumpers are used as a pair exclusively on DXE-TW2010L TransWorld Antennas 5-Band Manually Controlled Switch Box and Center Post. This pair of jumpers are sold to replace lost or damaged parts. These high-quality stainless steel band-change jumpers are the same as supplied with DXE-TW2010L. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$49.99
$22.49
Clearance
DX Engineering Feedpoint Wire and Connector Assemblies
DX Engineering Feedpoint Wire and Connector Assemblies provide a new and unique method of feeding an antenna radiating element. A ring terminal with a 1/4 in. hole is crimped and soldered to a 12 in. long insulated 14 AWG stranded copper wire, complete with weather-protective heat shrink tubing. Then, these feed point wires are terminated to the center pin of an N-type male or UHF male PL-259 with special insulating sleeves and weather-sealing heat shrink. These assemblies are intended to be used with a double female bulkhead connector, mounted into the Radial Plate, for use on an HF vertical antenna, for example. This wire and connector combination allows for the complete weather sealing of a single wire feed point, while properly terminating the feedline shield to the radial system or ground point of the antenna system. Especially useful for phased vertical installations, the DX Engineering Feedpoint Wire and Connector Assemblies are ready for your special antenna projects!
( 5 )
$29.99
$20.24
Clearance
DX Engineering Receive Filters
DX Engineering Receive Filters are available individually for use in the NCC-2, RPA-2, RTR-2 or DMC-2 with adapter boards. These filters are also available in sets with mounting fixtures for use in the NCC-1. DX Engineering Receive Filters are numbered for the key Amateur Band on which they function. The Band Pass filter models pass RF only on the numbered band, the High Pass models function on that band and all device frequencies above, and the Low Pass models work on that band and all device frequencies below. Response plots for Receive Filters are conveniently listed on a single page in this product's detail web page tab labeled "Charts and Guides". Some users will want to use a pair of these filters with two of the required DXE-RXFL-1 Filter Adapter Boards in their NCC-2. Each individual filter used requires a DXE-RXFL-1 Single Filter Adapter Board to convert them for installation in DX Engineering device models DXE-NCC-2, DXE-RPA-2, DXE-RTR-2 or DXE-DMC-2. All of the RXFL filters are still available in paired sets including two filters and one filter mounting fixture for owners of the legacy NCC-1 unit. See the Receive Filter Sets in combo packages by entering NCC-1 into the search box above.
( 1 )
$47.99
—
$49.99
$35.99
—
$37.49
Clearance
DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits
DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits are custom made to modify DXE-MBVE-5A Multi-Band Vertical Antennas into 60 Meter mono-band vertical antennas. By accomplishing this conversion, the antenna will operate with peak performance on the 60 meter band. When properly tuned, the SWR should be under 1.5:1 across the entire 60 Meter band. At this point in time, there are Five Channels (USB mode) used on 60 Meters: Channel 1: 5330.5 kHz, Channel 2: 5346.5 kHz, Channel 3: 5357.0 kHz, Channel 4: 5371.5 kHz and Channel 5: 5403.5 kHz. CW and digital modes are also useable. There are actually three kit packages available to assemble a DX Engineering 60 meter mono-band antenna. They are: DXE-MBVE-5A60MCK, the element conversion kit, only; DXE-VE-60-2P: an antenna kit with most of the required parts, and the DXE-VE-60-2P-RAD, a complete kit with all required parts included. Please review all part numbers on our web site to choose your best method of raising a 60 meter mono-bander. If you already have a DXE-MBVE-5A series antenna installed and you wish to convert it, all you will need is our DXE-MBVE-5A60MCK Monoband Conversion Kit plus the following: One COM-BAL-11150T COMTEK 1:1 Balun; one DXE-UN-BRKT-5A mounting bracket for the COMTEK balun, and one container of JTL-12555 or JTL-12502 Jet-Lube SS-30 Anti-Seize. We suggest the use of anti-seize because it ensures good electrical and RF connection for aluminum element sections. It is also used on the threads of stainless steel hardware to prevent galling (seizing) and aid in proper tightening. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering has been asked to provide a high-efficiency, robust and attractive 60 meter vertical-antenna solution. Here it is! Order your DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits (or other kit package) and get on 60 meters with the great signal you desire!
Not Yet Reviewed
$49.99
$37.49