Filters
Clearance
DX Engineering TW Antenna Band Jumpers
DX Engineering TW Antenna Band Jumpers are used as a pair exclusively on DXE-TW2010L TransWorld Antennas 5-Band Manually Controlled Switch Box and Center Post. This pair of jumpers are sold to replace lost or damaged parts. These high-quality stainless steel band-change jumpers are the same as supplied with DXE-TW2010L. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
Not Yet Reviewed
$49.99
$22.49
Clearance
Scratch & Dent
DX Engineering Replacement TW Antenna Structures
DX Engineering Replacement TW Antenna Structures are direct-replacement structures for the top (DXE-TW-BAS-TOP) or bottom (DXE-TW-BAS-BTM) of your DX Engineering TW Adventurer, Explorer, Globetrotter or Solo Explorer compact vertical dipole antennas. No one ever wants their antennas damaged, but accidents do happen; especially with antennas as portable as these TW Series antennas. Made of high-quality black powder-coated aluminum, these replacement parts are also compatible with older TW portable or stealth antennas. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. If you have need of a replacement top or bottom section of your TW antenna, order DX Engineering Replacement TW Antenna Structures and get your TW antenna back in great shape! NOTE: Some older versions of the TW Antennas are not compatible with current production parts. The original manufacturer of TW Antennas had changed the design more than once and newer parts will not fit some older models. Call DX Engineering to verify if your old TW Antenna will be compatible with currently produced parts and assemblies.
Not Yet Reviewed
$128.99
—
$139.99
$109.64
—
$118.99
Clearance
DX Engineering Feedpoint Wire and Connector Assemblies
DX Engineering Feedpoint Wire and Connector Assemblies provide a new and unique method of feeding an antenna radiating element. A ring terminal with a 1/4 in. hole is crimped and soldered to a 12 in. long insulated 14 AWG stranded copper wire, complete with weather-protective heat shrink tubing. Then, these feed point wires are terminated to the center pin of an N-type male or UHF male PL-259 with special insulating sleeves and weather-sealing heat shrink. These assemblies are intended to be used with a double female bulkhead connector, mounted into the Radial Plate, for use on an HF vertical antenna, for example. This wire and connector combination allows for the complete weather sealing of a single wire feed point, while properly terminating the feedline shield to the radial system or ground point of the antenna system. Especially useful for phased vertical installations, the DX Engineering Feedpoint Wire and Connector Assemblies are ready for your special antenna projects!
( 5 )
$29.99
$20.24
Clearance
DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits
DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits are custom made to modify DXE-MBVE-5A Multi-Band Vertical Antennas into 60 Meter mono-band vertical antennas. By accomplishing this conversion, the antenna will operate with peak performance on the 60 meter band. When properly tuned, the SWR should be under 1.5:1 across the entire 60 Meter band. At this point in time, there are Five Channels (USB mode) used on 60 Meters: Channel 1: 5330.5 kHz, Channel 2: 5346.5 kHz, Channel 3: 5357.0 kHz, Channel 4: 5371.5 kHz and Channel 5: 5403.5 kHz. CW and digital modes are also useable. There are actually three kit packages available to assemble a DX Engineering 60 meter mono-band antenna. They are: DXE-MBVE-5A60MCK, the element conversion kit, only; DXE-VE-60-2P: an antenna kit with most of the required parts, and the DXE-VE-60-2P-RAD, a complete kit with all required parts included. Please review all part numbers on our web site to choose your best method of raising a 60 meter mono-bander. If you already have a DXE-MBVE-5A series antenna installed and you wish to convert it, all you will need is our DXE-MBVE-5A60MCK Monoband Conversion Kit plus the following: One COM-BAL-11150T COMTEK 1:1 Balun; one DXE-UN-BRKT-5A mounting bracket for the COMTEK balun, and one container of JTL-12555 or JTL-12502 Jet-Lube SS-30 Anti-Seize. We suggest the use of anti-seize because it ensures good electrical and RF connection for aluminum element sections. It is also used on the threads of stainless steel hardware to prevent galling (seizing) and aid in proper tightening. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering has been asked to provide a high-efficiency, robust and attractive 60 meter vertical-antenna solution. Here it is! Order your DX Engineering DXE-MBVE-5A60MCK 60 Meter Monoband Conversion Kits (or other kit package) and get on 60 meters with the great signal you desire!
Not Yet Reviewed
$49.99
$37.49