Availability
Clearance
DX Engineering Heavy-Duty Saddle Clamps
Our tradition of continuous innovation was evident with the introduction of the DX Engineering Heavy-Duty Saddle Clamp line. DX Engineering set new standards over a decade ago with the introduction of the industry's best clamps for mounting antennas and element tubing. Featuring superior gripping power, our new Heavy-Duty Saddle Clamps are available in six different sizes, to fit tubing with Outside Diameter (OD) inch sizes of 0.75, 1.00, 1.25, 1.50, 1.75, and 2.00. Commercial and industrial engineers and installation technicians all over the world have discovered a diverse range of applications for DX Engineering Heavy Duty Saddle Clamps. DX Engineering Heavy Duty Saddle Clamps are designed to be used where maximum torque handling is required on aluminum, steel or stainless steel tubing. Conceived of by builders of large and heavy Yagi antennas and Log Periodic arrays, these clamps are made in sizes that securely fit the outside diameter of tubing for mounting to a flat plate or surface. Their wide gripping surface equals superior clamping power! Perfect for antenna construction and mounting, or wherever standard U-bolt saddle clamps and other torque-control products have proven inadequate, our Heavy Duty Saddle Clamps provide excellent grip on booms, masts and element tubing. Unlike stamped or machined-type clamps, Heavy Duty Saddle Clamps are cast from a rugged aluminum alloy that grips tubing with a special textured surface and are sized for an incredibly secure fit that resists torque, wind and weather. Heavy Duty Saddle Clamps include two cast aluminum saddles (two halves) and a stainless steel reinforcement plate for high strength and superior corrosion resistance. Due to the wide diversity of clamping applications where Heavy Duty clamps are beneficial, mounting hardware is NOT included. However, a complete line of Armor-Coated and Stainless Steel Hex Bolt Hardware Sets are available for top performance in most mounting applications. Typical Heavy Duty clamp mounting applications on a 1/4 in. plate require a minimum length bolt set, as indicated in the chart, linked in "More Detail…," and displayed in the "Required Parts" tab. For larger tubing attachment applications with ultimate gripping strength, DX Engineering Super Duty Saddle clamps are also available for 2.0, 2.5 and 3.0 in. O.D. sizes. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. Plan your next project with the best clamps available... period. DX Engineering Heavy Duty Saddle Clamps are ready to provide superior performance for your antenna, mast or other tubing mounting application.
( 10 )
$14.49
$10.49
Clearance
DX Engineering Armor Coated Hex Bolt Hardware Sets
DX Engineering Armor Coated Hex Bolt Hardware Sets are offered in pairs and are intended for use with DX Engineering Super Duty Saddle Clamps or Heavy Duty Saddle Clamps on a customer supplied 1/4 in. plate. These Armor Coated Hex Bolt sets include two hex head bolts, two split washers, two nuts, and two flat washers. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. DX Engineering Armor Coated Hex Bolt Hardware Sets are offered in pairs and are available in limited quantities until they are sold out. For all bolt sizes available including sizes not available here in armor coated bolts, see the stainless steel bolts offered. Search for DX Engineering Hex Bolt Hardware Sets.
( 1 )
$6.99
—
$11.99
$1.40
—
$4.80
Clearance
DX Engineering Replacement Saddle Clamp Bolts
DX Engineering Replacement Saddle Clamp Bolts are constructed of durable and corrosion resistant stainless steel and include replacement stainless steel washers and nuts. DX Engineering replacement saddle clamp bolts provide maximum surface contact to prevent slippage. These saddle clamp bolts are perfect for securing aluminum tubing for any antenna, mast or tower project. Replace lost or damaged U and V-bolts with new ones from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 5 )
$7.39
—
$34.99
$5.54
—
$26.24
Clearance
DX Engineering Hex Bolt Hardware Sets
DX Engineering Hex Bolt Hardware Sets let you choose the length of the bolts you want to use for your DX Engineering Clamps. To support the extreme versatility of DX Engineering Clamps, these stainless steel bolt sets come in specially selected pairs for Super Duty Saddle Clamps, Heavy Duty Saddle Clamps and our Resin Support Blocks. Eight bolt sets are provided specifically for our Genius Clamps. One of these Hex Bolt Hardware Sets will complete your order for any DX Engineering Clamps that requires a straight hex bolt. Perfectly sized for the Super Duty and Heavy Duty Saddle Clamps, various sizes of 8-18 stainless steel hex bolt sets include two hex head bolts, two split washers, and two nuts, with four flat washers, or with two flat washers for the Resin Support Blocks. Genius Clamps Bolt Sets include 8 bolts, flat washers, split washers and nuts. Please remember that price and quantity of parts vary according to the application. Saddle Clamps are typically mounted on a customer supplied 1/4 inch plate with one of these specified DX Engineering Hex Bolt Sets. Click "More Details" and find the clamp dimensions chart linked in the Documents tab, or view the recommended or required parts listing at each clamp to find the matched bolt set of minimum usable length. Longer bolt sets may be used for special applications such as on plates of greater thickness. However, some DX Engineering Hex Bolts are not threaded for their entire length, so each set will only work for a specific range of mounting plate or tubing thickness. NOTE: The use of anti-seize thread lubricant is REQUIRED on all stainless steel hardware BEFORE initial assembly. 18-8 Stainless Steel bolts have a tightening torque specification of 132 in/lbs. Our DX Engineering Genius Clamps, Super Duty Saddle Clamps, Heavy Duty Saddle Clamps and Resin Support Blocks are superior products. Use DX Engineering Hex Bolt Hardware Sets as the proper high-quality companion hardware for your clamps. Order them today from DX Engineering!
( 6 )
$6.99
—
$14.99
$4.49
—
$10.49
Clearance
DX Engineering Element Clamps
DX Engineering Element Clamps, also known as band clamps, are made completely from marine-grade stainless steel; even the worm gear screw and housing. They are available with or without a 10-24 threaded stud welded to the band. The standard, non-studded Element Clamps are suitable for many projects around the home or business, in the shop or the shack, and from ship to shore. They are typically used on slit aluminum or fiberglass tubing, also available from DX Engineering, for the repair and construction of antenna elements. The studded band clamps are ideal for mechanical fastening to round or odd-shaped members. These DX Engineering Element Clamps can be used for electrical connections (including grounding) or for the mechanical assembly of components, attachment of signs, etc. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. There are sizes for each and every application. Order extras of these ALL Stainless Steel DX Engineering Element Clamps for those unexpected repairs and projects!
( 9 )
$11.29
$7.49
Clearance
DX Engineering LRMM Fasteners
DX Engineering LRMM Fasteners are designed to be the perfect match for our DXE-LRMM heavy-duty stainless steel lightning rod mast mounts. These stainless steel fastener kits provide the threaded rods, nuts, washers, and lock washers you'll need for lightning rod mast mount clamp installation. Choose the length of fasteners you need for installation based on mast and lightning rod diameters. These DX Engineering LRMM Fasteners are durable and weather resistant stainless for extended life. Order today!
Not Yet Reviewed
$33.98
$22.49
Clearance
DX Engineering Saddle Clamps
DX Engineering Saddle Clamps are the best designed and tested clamps you'll find anywhere! And, the selection is extensive! Designed specifically to fit and secure tubing to surfaces in antenna construction, our Saddle Clamps are built strong to prevent slippage. DX Engineering U-bolts and V-bolts are crafted from high-strength 18-8 stainless steel with enough length to attach to thick plates. Saddles are cast from high-strength 535.0 aluminum with a rippled surface for superb gripping plus superior anti-corrosion properties. Saddles are available with natural or powder coated finishes. Need to clamp steel pipe or ground rods? Choose our V-clamps with stainless steel saddles. They have serrated teeth for clamping to a pipe or rod securely. All saddle clamps include stainless steel flat washers, lock washers, and nuts. NOTE: Due to the nature of high-tolerance metals, especially stainless steel, this hardware requires the application of an anti-seize thread lubricant before assembly to prevent galling and seizing. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you need Saddle Clamps for your application, there's only one smart choice--clamp central at DX Engineering.
( 107 )
$44.99
$33.74