Availability
Instant Rebate
Yaesu FT-65R 144/430 MHz Dual-Band HTs
Yaesu FT-65R 144/430 MHz Dual-Band HTs are very compact, ruggedly constructed handheld VHF/UHF rigs with three selectable power settings of 5W, 2.5W, or 0.5W. Their big front panel speaker provides a full 1 watt of crisp, clear audio. These units come supplied with a 1950mAh Li-ion battery pack capable of providing over 9 hours of operation. An optional, higher-capacity 2500mAh Li-ion battery is available for over 11.5 hours of operating time. A 2.5 hour rapid charger comes standard, making the transceiver ready to operate at any time. Yaesu's newly designed large, white LED displays are vibrant and highly visible. Four Quick Recall Keys (QRK) are user programmable to instantly recall favorite channels with just the push of a button. Other useful features include: versatile scanning capabilities, such as Programmable VFO Scan, Memory Scan, Priority Channel Scan, and Weather Alert Scan; WX Channels with "Severe Weather" Alert, PC Programming, Transceiver-to-Transceiver Cloning, FM Broadcast Receiver, Automatic Range Transponder System (ARTS), CTCSS/ DCS Operation, Busy Channel Lockout (BCLO), Automatic Power Off feature, and Transmitter Time Out Timer (TOT). VOX operation is available with the optional Earpiece Microphone SSM-512B. * Commercial Grade VHF / UHF: FT-65R transceivers are built to commercial grade standards, including their IP54 Rating for Dust and Water protection. MIL-810-C, D and E standards make these radios suitable for operation in the harshest of environments. * Powerful Output: With 5 Watts of reliable RF output power, this radio is sure to be heard. Never miss a call with One Watt of crisp, clear audio output from the oversized front panel speaker. * High Capacity Li-Ion battery: FT-65R transceivers are packaged with a powerful 1950 mAh Li-Ion battery pack, providing the radio with over 9 hours of operating time. Or upgrade to the optional high-capacity 2500 mAh Li-Ion battery pack for over 11.5 hours of extended operating time. To ensure minimal down time, FT-65R transceivers also come packaged with a 3.5-Hour rapid charger. * QRK (Quick Recall Key): Four Dedicated User-programmable Keys serve as shortcut keys to preferred menu options, or use the four dedicated recall keys to easily store and recall desired frequencies. * Versatile Scanning Capabilities: Programmable VFO Scan scans all channels in the desired frequency range; Memory Scan allows scanning of user selectable frequencies; Priority Channel Scan can be used to scan memory channels while making one channel a priority. Weather Alert Scan alerts the user when severe weather is approaching. * PC Programmable: These radios are capable of being programmed directly from a PC, making all of the advanced setup features a breeze! Use the optional software and SCU-35 programming cable to make programming a snap. * More advanced features: Tons of advanced features are loaded into this compact radio, including: Transceiver to Transceiver cloning with the optional SCU-36 clone cable, FM Band receiver equipped, ARTS (Automatic Range Transponder System), DTMF operation, CTCSS/DCS operation, TOT (time out timer), and more. Note: For additional information, please look at the files under the "Documentation" tab. For really versatile dual-band FM operation, consider one of these Yaesu FT-65R 144/430 MHz Dual-Band HTs from DX Engineering!
( 105 )
$119.95
On Sale
Alinco DM-30 Digital Power Supplies
Alinco DM-30 Digital Power Supplies are an affordable switching power supply that packs a lot of features, including Anderson Powerpole connectors. They are an ultra-compact, lightweight design that supports 9-15 V DC variable output and delivers up to 30A peak power to 2-way radio communication products. Alinco DM-30 power supplies are available for 120 V AC input as their DM-30TR or for 230 V AC input as their DM-30ER (E for Europe). A convenient feature for Amateur Radio users: an adjustable Noise Offset Circuit moves unwanted switching noise to another frequency. Other features include: a large illuminated digital Volt/Amp meter, a pair of rear panel binding posts (30A peak), front panel Anderson Powerpole connectors (two pairs 5A peak), switch-selected voltage adjust (9-15 V) or fixed at 13.8 V, ripple less than 80mVp-p and triple circuit protection for short-circuit, over temperature, and current limiting. Alinco DM-30 Digital Power Supply features: * A highly visible, accurate digital Volt / Amp meter allows real-time monitoring of the output current * Two pairs of Anderson Powerpole connectors on the front panel (DM-30TR) add extra versatility * A pair of Banana Jack connectors on the front panel (DM-30ER) adds extra versatility * The Noise Offset Circuit moves unwanted switching noise to another frequency * Designed with reliability in mind, a durable cooling fan keeps DM-30 running continuously under heavy loads * Rear output terminals are large and provide an efficient Max 30A power transfer to your equipment Alinco DM-30 specifications: * Input voltage: 120 V AC 50/60Hz (DM-30TR) * Input voltage: 230 V AC (DM-30ER) * Output voltage: 9 to 15 V DC variable or select voltage fixed at 13.8 V * Output current 20A continuous at 13.8 V DC * 30A max (50 percent duty cycle, 1-minute intervals) * Output voltage regulation: Less than 2 percent variance to full load * Ripple voltage: Less than 80mVp-p * Protection: Over current, over temperature, and short circuit * Fuse protection: DM-30TR, 8A (DM-30ER, 5A) * Dimensions: (W x H x D) 6.10 x 2.80 x 8.07 in. (155 x 75 x 205 mm) * Weight: Approximately 3.53 lbs. (1.6kg) with AC cord Note: For additional product information, please look at the files under the "Documentation" tab. Alinco power supplies offer good value for your ham-radio dollar. Why not upgrade to a switching power supply specifically designed for Amateur Radio? Order Alinco DM-30 Digital Power Supplies from DX Engineering to add versatility, convenience and quality to your shack's DC power!
( 82 )
$145.95
$134.95
On Sale
Alinco DM-530T Digital Power Supplies
Alinco DM-530T Digital Power Supplies pack a lot of features into an affordable communications-grade package. The output voltage of the DM-530T switching power supply is adjustable from 5-15VDC, or 13.8VDC fixed and can deliver up to 30A max current. Built-in triple circuit protections exist for short-circuit, over temperature and current limiting. The Noise Offset Circuit helps to reject switching-noise on the receive frequency by moving unwanted switching noise to another frequency. The large, highly visible and accurate digital Volt/Amp meter allows effortless real-time monitoring of output current. Other features of the Alinco DM-530T include: * Auxiliary 30A Output Terminals and USB Ports - Added front panel Anderson Power Pole ® terminals and USB ports provide versatile, quick connections. * Large Binding Posts - The main output terminals are large enough to provide an efficient power transfer to your equipment * Forced Air Cooling - Designed with reliability in mind, a durable cooling fan keeps DM-530 running continuously under heavy loads.
( 12 )
$239.95
$229.95
On Sale
ICOM IC-V3500 2M VHF FM Mobile Transceivers
Experience the state-of-the-art refinements of the new ICOM IC-V3500 VHF FM Transceiver boasting enhanced features and a rugged, easy-to-use design. The white, backlit LCD features a spacious layout that enhances readability and reduces eyestrain. This 2M analog FM mobile transceiver can transmit from 144-148 MHz at a full 65 W of stable output power and receive from 136-174 MHz. Enjoy new features like instant mute and crisp speaker output with the new Audio Volume Boost feature and new emergency safety functions that are required for some commercial use applications
( 10 )
$239.95
$211.16
—
$234.95
On Sale
RigExpert MATCH RFE Upgrade License
The RFE license is designed for professionals and enthusiasts working with radiofrequency (RF) systems, offering enhanced functionality for antenna and cable analysis. With this license, users can extend the operational range of their MATCH up to the 500 MHz RF band, making it ideal for a wide array of applications in telecommunications, broadcasting, and electronics diagnostics. The RFE license is tailored for: - RF engineers and technicians diagnosing and maintaining transmission lines. - Network professionals optimizing antenna systems. - Hobbyists and researchers delving into RF analysis within the licensed frequency range. Unlock an important features of the RFE license: TDR Chart Mode – utilize Time Domain Reflectometry (TDR) for fault detection and analysis. This mode allows users to locate faults in transmission lines by sending a short electrical pulse or a step function along the cable. Observing the reflected pulse to calculate Distance to Fault (DTF) using delay measurements, speed of light, and cable velocity factors. Interpreting the amplitude and shape of reflected signals to assess fault characteristics. The RFE license enhances the MATCH analyzer with the LC Meter, enabling precise measurements of Inductance (L), Capacitance (C), Quality Factor (Q), and Loss Tangent (tan δ). This powerful feature offers detailed insights into RF components, allowing for accurate analysis and optimization. User OSL Profiles: Supports up to 10 User Open-Short-Load (OSL) profiles, enabling precise calibration for accurate measurements for different cable lengths, connectors and adapters.
( 4 )
$200.00
$170.00
Special Offer
Milwaukee M12 Underhood Lights
Milwaukee M12 underhood lights offer specialty lighting that shines brighter, grips stronger, and protects longer. They deliver full engine coverage and clarity with a solid, non-damaging grip, better positioning, and a light bar that can be rotated, slid, removed, or hung for added flexibility and versatility. Tackle your challenging task and trade-specific lighting demands with Milwaukee M12 underhood lights. They're available individually; battery and charger are sold separately or in a kit, when listed. Features include: * TRUEVIEW high-definition output provides neutral, color-accurate lighting * High mode—1,350 lumens/4 hours * Low mode—600 lumens/8 hours * FINISHGUARD hooks provide lasting protection against scratches to your vehicle's finish * 2 times more gripping surface for maximum hold * Mounting hooks extend from 47 in. to 78 in., covering wide cars and trucks * Light bar with stainless steel hook * Sturdy aircraft aluminum frame * Impact and chemical-resistant lens * M12 REDLITHIUM XC 4.0 extended capacity battery pack offers up to 8 hours of run-time (available separately or in kit) * M12 battery charger (available separately or in kit) * 5-year tool warranty * Limited lifetime LED warranty
Not Yet Reviewed
$219.99
Instant Rebate
Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers
Yaesu FT-4XR VHF/UHF Dual Band FM Handheld Transceivers are the ultimate budget-friendly choice for compact design and reliability, providing up to 5 watts of stable and reliable output power, hour after hour! These rugged handheld transceivers have 1.4 in. front speakers that deliver 1 watt of powerful, clear and crisp, intelligible audio. The FT-4XR (Dual Band VHF/UHF) and the FT-4VR (Single Band VHF) share the same core feature set and are identical in appearance. FT-4XR HTs include an extraordinarily robust package of features and specifications: * Over 15 hour operating time (5:5:90 duty cycle)* with the supplied 1,750mAh Li-ion battery pack * 3.5 hour rapid charger included * Selectable frequency step from 5 kHz * Two quick programmable keys for quick access to favorite functions * 200 memory channels; three Home Channels and 10 pairs PMS channels * Two different frequencies in one memory channel (one for RX another for TX) user-settable * Versatile scanning capacities including VFO scan, Memory scan, Programmable Memory scan (PMS), Memory Bank Scan and Dual Receive * Lockout for Keypad/PTT Lockout to prevent accidental changes or transmission * VOX Operation with the optional VOX headset * Optional cloning cable and cloning feature allows memory and configuration data from transceiver to transceiver * PC Programmable with optional programming cable * FM Broadcast Receiver * CTCSS/ DCS Operation * Time-out-Time (TOT) * Compact size: 2.1 x 3.5 x 1.2 in. (WHD) For more detailed features and specifications, please click "More Details" to see Documentation and additional images.
( 36 )
$109.95
On Sale
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers
ICOM IC-T10 VHF/UHF Dual-Band FM Handheld Transceivers are the latest addition to Icom's Amateur handheld lineup reminiscent of the T70 HTs, based on the commercial-grade IC-F1000T series of radios. These direct conversion wideband VHF/UHF portable handhelds provide a stable 5 Watts RF output on the 2 meter and 70cm bands and they are FM broadcast receive capable; 88-108 MHz. The IC-T10 features include 200 channel memory, Priority Scan, Internal VOX and CTCSS / DTCS /DTMF Encoding, and high output audio, among many others, that will place this Icom HT at the top of the list!
( 29 )
$239.95
$169.00
On Sale
ICOM IC-V86 VHF FM Portable Handheld Transceivers
ICOM IC-V86 VHF FM Portable Handheld Transceivers give you more audio, more RF power, more coverage and more battery capacity in a compact, MIL-STD portable 2 meter HT. Producing 1500 mW of audio power to an improved chassis design and speaker, the IC-V86 lets you easily hear incoming signals in loud, noisy environments. The IC-V86 transmit coverage is expanded with 7W of RF output power and the new 2250mAh Li-Ion battery pack also provides longer operational capabilities. Useful features, functions and specs and of the ultra-rugged ICOM IC-V86 FM 2 meter HT: - Frequency Range - TX: 144-148 MHz, RX: 136-174 MHz - Output power - 7.0/5.5/2.5/0.5 W (EX Hi/Hi/Mid/Low) - Type of emissions - F2D, F3E (FM, FM-N) - Durable BNC female antenna connector - 200 memory channels, 6 scan edge channels and 1 call channel - Maximum Frequency Deviation: ±5.0 kHz/±2.5 kHz (FM Wide/ FM Narrow) - Selectable Volume Level, VFO/Memory Channel Selection Control - Integrated VOX function - Built-in CTCSS and DTCS Encode Decode and Tone Scan - IP54 Waterproof rating - IP67 Rating for dust-tight and waterproof protection - MIL-STD-810 -C,-D, -E and –F; passed environmental tests for pressure, temperature, sun, rain, humidity, salt fog, dust, vibration and shock - Dimensions (WHD) 2.3 × 4.4 × 1.2 in (58.6 × 112 × 30.5 mm) with supplied BP-298 battery pack - Made in Japan - Quality and Reliability Supplied Accessories (May differ, depending on transceiver version): - BP-298 Battery Pack - BC-240, Desktop Charger - BC-242, AC Charger Adapter - MB-124 Belt Clip - Antenna, BNC Rubber Whip
( 33 )
$139.95
$129.95
Clearance
LED Candy Cane Archway
Accent your holiday yard display with this sweet LED Candy Cane archway! The candy canes stand 7 ft. tall, the whole display is 10 ft. wide, and it's all covered in tinsel fabric with 350 UL-listed LEDs. Includes ground stakes and spare lights.
Not Yet Reviewed
$199.99
$169.50
Clearance
ERICO Lightning Rods
ERICO Lightning Rods, also known as air terminals or strike termination devices, are offered in a range of base materials and surface plating. These lightning rods provide a minimum of five full threads of engagement with their mounts. Available in various lengths and diameters, ERICO Lightning Rods will offer a better path to ground than your expensive site equipment. Although there is no 100 percent protection from lightning damage, these lightning rods, when combined with coaxial surge protectors and other standard grounding practices, offer the best protection available. ERICO lightning rods are designed to be installed directly to structural steel in locations such as Amateur Radio and communication towers. Shunt lightning away from other, more destructive paths. Order these quality ERICO Lightning Rods from DX Engineering.
Not Yet Reviewed
$213.99
$171.19
Clearance
Tigertronics SignaLink USB Digital Communications Interfaces
Tigertronics SignaLink USB Interfaces support all computer program digital modes and digital voice modes, WITHOUT using your computer sound card! This includes legacy modes, such as RTTY, SSTV, and CW, as well as today's most popular modes, including FT8, PSK31, JT65, JT9, FSK441, MSK144, WSPR, Olivia, EchoLink Node and hundreds more! Front panel controls let you adjust your Transmit Audio, Receive Audio and Transmit Delay "on the fly." The SignaLink USB has a state of the art "built-in" low-noise sound card chip. The SignaLink USB has only one USB connection to the computer, and in most cases, only one connection to the radio. Convenient front panel controls make setup and operation very easy. The SignaLink USB is fully isolated and is compatible with ALL radio Mic, Data, and Accessory Ports. The SignaLink USB - with it's own built-in sound chip- allows you to use your computer's sound card for other computer functions, while enjoying digital communications. No more "You've got mail!" or other computer sounds in the middle of your transmission! Just order the correct fully-assembled interface cable for your radio. Cables are available for mic connector interface or rear panel accessory and data DIN plugs for transceivers so equipped which allows a neat, clean installation! Which cable to order? On the TIG-SL-USB details page click on the "Required Parts" tab to search by radio brand and model. You may also click on "Charts and Guides" to see a complete Cable Interface Listings of all cable to radio selections, including color jumper pictorials. Tigertronics SignaLink USB units are now provided with rubber feet. If you are one of the thousands of happy users with an older Tigertronics unit, the accessory DXE-RBP-500 adhesive rubber feet are a welcome accessory to keep the unit from sliding around. Tigertronics SignaLink USB units feature: -- Easy to set up - Not complicated - Just plug in two cables -- Front panel controls--easily adjust your TX audio, RX audio, and transmit delay without having to open the SignaLink case, optimizing your transmit audio (RF power), receive audio level, and transmit hang time delay on the fly -- Works with ALL radios Works with all radio mic, data, and accessory ports, allowing most users to attach them to the back of the radio and leave the microphone plugged in -- Software included - with a complete listing of freeware, shareware and software available for every digital mode -- Easy hookup to Macintosh or PC - Easy installation--one USB connection to the computer and, in most cases, only one connection to the radio -- No external power required--powered by the computer's USB port -- Built-in low noise sound card--this provides optimum performance and frees your computer's existing sound card for other uses; it also greatly simplifies installation and operation by reducing the number of cable connections and by providing consistent performance that is independent of the computer's sound card -- Complete isolation--eliminates troublesome ground loops and prevents hum and noise from degrading signals -- Transmit audio/side tone output--a rear panel monitor jack can be used with headphones or powered speakers to monitor your transmit audio or side tone during CW operation -- External speaker support--you can plug an external speaker or headphones into their rear panel auxiliary jack and continue to hear your RX audio -- FCC-certified--unlike other competitors, they have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules -- Comprehensive & Easy to follow instructions
( 12 )
$126.00
$100.80
On Sale
Alinco DR-06TA 6 Meter FM Mobile Transceivers
Alinco DR-06TA 6-Meter FM Mobile Transceivers are capable, compact 6-Meter, 50 watt FM rigs. With the DR-06TA you will discover excitement working worldwide "Magic Band" communications! Working DX is possible over thousands of miles when taking advantage of unique propagation such as Sporadic-E, F2 reflection and meteor scatter, just to name a few. Of course even without favorable propagation conditions, 6 meter repeaters will keep you communicating with friends as well. When the Magic Band opens, the world is within your reach with just a few watts. Be part of the fun! These compact, affordable, easy-to-use mono-band rigs will make your QSOs more enjoyable at home or on the road, so take a closer look at 6m FM and Alinco! Features of Alinco DR-06TA 6-Meter FM Mobiles: * 100 alpha-numeric memory channels * CTCSS, DCS encode plus decode, DTMF encode and Tone-burst are all standard * Ten autodial memories * Clean, clear Alinco audio * Super-wide 7 character alphanumeric display * Wide and narrow FM modes * Theft alarm feature * A large, palm-fitting commercial-grade backlit microphone with a metal connector (not a modular plug) as well as direct frequency input and direct multi-function access such as monitor, call channel, power setting, memory to VFO plus more! * Stays in mode you select (even voice/packet) through power-off cycles * Revised NEW manufacturing to be compliant to RoHS/lead-free order in the EU. Specifications: * Frequency range: TX: 50 to 53.995 MHz RX: 40 to 69.995 MHz * Operating modes: FM=16K0F3E * Channel steps: 5, 8.33, 10, 12.5, 15, 20, 25, 30, 50 kHz * Memory: 100 channels plus 1 quick recall * Antenna impedance: 50-ohm unbalanced (SO-239) * Frequency stability: Plus/minus 7 ppm * Power supply: 13.8V Nominal, 11.7 to 15.8 volts * Current drain: TX High 11.0 amps, RX 0.6 amps maximum * Usable temperature range 14 degrees F to 140 F (-10 degrees C to 60 degrees C) * Dimensions (WHD, w/out projections): 5.59 in. x 1.57 in. x 6.85 in. (142 mm x 40 mm x 174 mm) * Weight: 35.3 oz. (approx. 1 kg) * CTCSS tone encoder/decoder: 39 tones * Digital Coded Squelch encoder/decoder: 104 codes Transmitter: * Output power: Approximately 50W (HI) 20W (MID) Approx. 5W (LOW) * Modulation system: Variable reactance frequency modulation * Spurious emission: Less than -60 dB * Maximum frequency deviation: (FM) plus/minus 5 kHz / (NFM) plus/minus 2.5 kHz Receiver: * Receive system Double-conversion Super-heterodyne * Sensitivity (-12dB SINAD) Less than -12.0dBu * Intermediate frequency 1st IF 10.7 MHz, 2nd IF 450 kHz * Selectivity: (FM) -6dB plus/minus 12 kHz or more, -60dB plus/minus 28 kHz or less, (NFM) -6dB plus/minus 6 kHz or more, -60dB: plus/minus 16 kHz or less * Audio output power More than 2 W (8-ohms at 10 percent THD) Note: For additional information, please look at the files under the "Documentation" tab. Included accessories: * Instruction manual * EMS-57 DTMF Microphone * Mounting Bracket w/screw kit * DC Power Cable (ADUA38) * Mobile microphone holder * Alarm Cable Optional Accessories: * Microphones EMS-53 non-keypad microphone * ADUA38 - Spare DC Power Cable * ADFM78 – Spare Mounting Bracket * DM330MVT - DC Power Supply, 120 VAC In, 13.8 VDC Out at 30A, switching * EJ-41U internal TNC board is available as an option for 1200/9600bps packet; no need to remove mic for packet operation Operating 6-meter mobile can be a great way to pass travel time. After all, it's the Magic Band! Whether it's FM Sporadic-E DX or local repeaters, one of these Alinco DR-06TA 6-Meter FM Mobile Transceivers, from DX Engineering, offers some real mobile fun!
( 3 )
$255.95
$249.95
DX Engineering AFHD-4 AM/FM/HD Antennas
DX Engineering AFHD-4® AM/FM/HD Antennas are designed for easy outdoor or attic installation. With rugged pro-quality construction, these low profile omni-directional antennas will bring out the best performance from any receiver. They deliver best-in-class AM/FM and HD radio reception over a single RG-6 cable! DX Engineering AFHD-4® antenna features: * AM and FM broadcast reception, analog and digital * Easy to install; mast and wall-mount options included * Omni-Directional antenna receives signals from 360 degrees * Requires single RG-6 coaxial cable (not included) * Band separator for optimal performance * Antenna Length: 49.00 in. (not including the base) Note: For additional product information, please look at the files under the "Documentation" tab. Many audiophiles use high-end, classic and vintage receivers. HD receiver listeners use the latest in digital technology. Why not have a professional quality antenna that will satisfy both kinds of listening? Old receiver or new, these DX Engineering AFHD-4® AM/FM/HD Antennas deliver the best broadcast radio reception!
( 11 )
$165.99
On Sale
ICOM IC-R6 SPORT Communications Receivers
ICOM IC-R6 SPORT Communications Receivers have an ultra-wideband frequency range, covering from 100 kilohertz to 1,309.995 Megahertz. Even so, they provide superior sensitivity and selectivity characteristics that resist interference. A wide variety of utility and government communications, amateur radio stations, AM, FM, and short wave broadcast stations may be monitored with these receivers. A valuable feature, the Voice Squelch Control, opens the squelch only when a modulated signal is detected. It's a handy feature for listeners scanning for news, talk, and music--not data bursts or beacons. IC-R6 SPORTs have 100 channels per second of high-speed scan capability when in VFO mode. This superior scanning power provides efficiency when searching over 1,309 MHz of spectrum! With 1,300 alphanumeric memory channels, 50 scan edges, 200 auto-write memories, and 22 memory banks, ICOM IC-R6 SPORT Communications Receivers give you unparalleled scanning flexibility! These IC-R6 SPORTs are very energy-efficient! Power is supplied by two standard AA alkaline batteries. You may also operate the IC-R6 SPORT utilizing the optional DC car cord. Or use optional rechargeable NiMH cells with optional wall charger and perhaps the convenient drop-in stand. The power choices are all yours! Additional features include: * Built-in audio low-pass filter * Plus/minus 1.0ppm high-frequency stability at 25 degrees C * Ferrite bar antenna for AM broadcast * 150 mW loud audio with internal speaker * DTCS and CTCSS tone squelch and reverse tone squelch * Priority watch function with priority beep function * CI-V remote port for receiver control * PC-programmable with optional CS-R6 software * Receiver-to-receiver cloning with optional OPC-474 cloning cable * Auto power OFF-selectable 0.5-2 hours and end of busy signal * Compact, drip-resistant construction * Duplex operation monitoring * Automatic LCD backlight * Dial speed acceleration * Built-in RF attenuator * Auto memory-write scan stores the detected frequency, mode, and tone into a specified memory * Reversible up/down buttons and dial knob for volume, frequency, memory channel, scan direction, and set mode settings * Weather channel receive with WEATHER ALERT on the USA version only * Cellular coverage is BLOCKED in the USA version Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories: * Antenna * Belt clip * Hand strap OPTIONAL accessories: * BC-196SA wall charger (radio requires two Ni-MH AA cells, not included) * CP-18A DC car cord * BC-194 desktop drop-in base for use with BC-196SA or CP-18A * SP-27 tube (clear-stealth) earphone NOTE: IC-R6 receivers use an antenna with an SMA male connector. The receiver itself has an SMA female connector. These ICOM IC-R6 SPORT Communications Receivers hand you the world… quite literally in the palm of your hand! Thirty years ago, most of the features of these pint-sized portable communications receivers would have been found in only the highest-priced tabletop models. Many of their features didn't exist at all! Don't miss out on any of the action! For your handheld communications receiver needs, contact DX Engineering today for one of your own ICOM IC-R6 SPORT Communications Receivers!
( 11 )
$239.95
$195.95
Special Offer
Milwaukee M12 Underbody Lights
Milwaukee M12 underbody lights are revolutionizing the way automotive mechanics execute underbody work. This innovative light delivers you unmatched maneuverability and hands-free lighting. Two swivel points with 300 degrees of horizontal rotation and up to 180 degrees of vertical rotation paired with a strong magnetic base allow for easy mounting and better positioning. This Milwaukee M12 light features a 12 in. magnetic storage tray to hold nuts and bolts. 1200 lumens of high-definition output gives you full coverage for all tasks under the vehicle. The M12 underbody light can run up to 15 hours on low or 5 hours on high, providing all-day run-time on one XC4.0 battery pack. This LED underbody light is IP54 rated, impact, and corrosion-resistant to most chemicals found in the auto shop.
Not Yet Reviewed
$219.00
On Sale
CHANNELLOCK 8-Piece Tool Roll Pliers Set
The bright CHANNELLOCK blue gripped tools are standard equipment in the belts, buckets, and toolboxes of professional electricians, plumbers, and mechanics all over the world. This is quality you can count on—because any tool bearing the CHANNELLOCK name is made to the highest standards. CHANNELLOCK uses fine-polished, high-carbon, drop-forged steel; and their heavy-duty design ensures superior performance on the job. This 8-piece tool roll pliers set includes: * One 12 in. tongue and groove pliers * One 9 1/2 in. tongue and groove pliers * One 6 1/2 in. tongue and groove pliers * One 8 in. long nose pliers * One 7 in. diagonal cutting pliers * One 9 1/2 in. linesman pliers * One 7 1/2 in. end cutting pliers * One 8 in. adjustable wrench * Handy storage roll with custom-sized pockets for tools
Not Yet Reviewed
$199.99
$179.95
Clearance
Summit Racing 20 Hard Coolers
In the world of keeping cool, you are only as good as your gear. Duration is the name of the game, and no matter what your game is, you can count on the Summit Racing hard coolers to get you there. Summit Racing 20 hard coolers are tough, rugged, and durable. The smallest of the Summit Racing hard cooler line, they are great for personal use and day trips. Value is built-in to every part from top to bottom--value Summit Racing knew you would appreciate, at a price that you can afford. Key features and benefits: * Double barrel rubber T-grip latches * Smooth opening triple hinge lid * Replaceable purge valve for easy draining * 5-day "Insulation Sensation" * Rubber pads for ultimate skid proof stability * 1.25 in. rubber gasket drain plug * Steel lock down plates that double as bottle openers * High performance airtight gasket * Weighs 15.21 lbs. * Dimensions: -- Outer: 21.1 in. × 13.3 in. × 14.3 in. -- Inner: 14 in. x 9 in. x 8 in.
Not Yet Reviewed
$199.99
$145.50
Clearance
LDG Electronics TW-1 Talking SWR/Wattmeters
LDG Electronics TW-1 Talking SWR/Wattmeters provide an aural spoken indication of power and SWR using a digitally recorded voice. It is ideal for the visually impaired or for those times when you need to look elsewhere while still obtaining power and SWR measurements. At the press of a button, the TW-1 speaks the forward power, reverse power or SWR. Three languages are available: English, Spanish and German and it includes an internal top firing speaker; no external audio hookups are needed. The TW-1 also offers a continuous tone mode for tuning. Simply press and hold the Forward button and a tone indicates power. As you adjust your amplifier or antenna tuner, a higher tone indicates higher power. This is perfect for peaking your amplifier while keeping a close watch on the grid current. You can select either long or short voice reports (verbose or terse modes). Long reports include descriptors like "thousand" or "hundred" and end with "forward watts" or "reverse watts". Short reports speak only the numerical value of the measurement you've selected for a quick reading. The TW-1 needs just 1W to operate, but will handle up to 2000W PEP, making it suitable for everything from QRP to full legal limit. The TW-1 is accurate to ± 5% of reading across the entire power range and resolution is 1W or 1% of reading (whichever is higher). The microprocessor controlled TW-1 can easily be upgraded in the field with a simple chip exchange. It requires 11-15VDC at 200mA maximum (power supply not included) but consumes minimal current when not speaking. Suitable for mobile use, simply install it in a convenient location near your operating position and provide 12VDC through a fused line (fuse not included, LDG recommends a 2 amp fast-blow fuse). SWR Tone mode is especially useful for tuning a "screwdriver" antenna while watching the road. (LDG strongly recommends that you pull over to a complete stop before adjusting your antenna) The November 2005 issue of QST Magazine features an exhaustive review of the TW-1 starting on page 77. Additional Features and Specifications: -Frequency Range 1.8-54.0MHz -Power rating: 0-2000W PEP, Auto-Ranging -Speech: Speaks Forward and Reverse power in watts, as well as SWR -Languages: English, Spanish, German -Continuous tone for making amplifier or tuner adjustments -Accuracy: ± 5% of reading across entire HF range (± 10% on 6M) -Power requirements: 11-15VDC at 200 mA Max (user supplies power source) -2x UHF female SO239 Connectors -2.5mm x 5.5mm Center Positive DC Power Jack - DC Power cable included!
Not Yet Reviewed
$219.99
$186.99
On Sale
Heil PR 77D Microphones
Heil PR 77D Microphones are professional-quality dynamic mics for use in commercial broadcast, recording, podcasts—and any application that requires a smooth flat response over a wide frequency range, excellent transient response, great speech articulation and low IMD. These microphones are also great in Amateur Radio applications. Heil PR 77D Microphones achieve their exceptional performance with a large 1 in., low-mass voice coil encompassed by a powerful magnet structure using a mixture of neodymium, iron, and boron. Additionally, special attention has been paid to the phasing plug assembly to provide exceptional 180-degree, off-axis rear rejection of over 40 dB. Simultaneously, the front pattern allows the user to move about freely in front of the element with no change in response. Heil Sound PR 77D details: * Element Type: Dynamic * Output Connection: 3 pin XLR * Frequency Response: 60 Hz to 18 kHz (music-no filter); 120 Hz to 18 kHz (voice-filter on) * Polar Pattern: Cardioid * Impedance: 600 ohms nominal * Weight: 24.5 oz. * Max Sound Pressure Level (SPL): 146 dB * Output Level: -51 dB at 1 kHz * Rear Rejection: 40 dB at 180 degrees off axis (behind the mic) * Also available in Purple - model PR-77DP Heil PR 77D microphones feature a 2-position switch allowing the selection of the best characteristics for voice or music. The voice position rolls the audio off at 120 Hz at -6 dB per octave, while the music selection removes the filter—and the entire audio spectrum of 60 Hz to 18 kHz is present. They're designed to be used exclusively with booms, bases, or desk stands with the standard 5/8 – 27 microphone stand threads. A CC-1 XLR cable is required to interface with Amateur Radio rigs. If you're looking for a new studio-quality microphone for your band, or the ham bands, consider one of these fine Heil PR 77D Microphones from DX Engineering!
( 2 )
$249.00
$199.00
Special Offer
Milwaukee M12 Radio Plus Chargers
Milwaukee M12 Radio Plus Chargers are a great jobsite audio solution that delivers unmatched versatility for its size, allowing users to charge up, and turn up the sound with a full-range speaker, a tweeter, and the portability for the freedom to hang it up wherever you go. Streaming via Bluetooth seems to be more popular these days, but it's also nice to be able to tune into a radio station. These IP54 rated Bluetooth radios can be powered via a M12 battery or AC adapter, with the same 12V DC barrel jack also powering the battery charging feature. The M12 Radio Plus Charger also has a built-in USB charging port with 2.1A output. Milwaukee M12 Radio/Charger features and specs: * Connectivity: Bluetooth 4.2 for streaming music and AM/FM radio * 100 ft. Bluetooth range * Full-range speaker and tweeter deliver clear mids and highs * AM and FM radio tuner button for treble or bass adjustment * 10 radio presets * 6 ft. AC adapter * Self-centering keyhole and hollow handle offer various hanging options * 2.1A USB charging output delivers fast electronic device charging * IP54 water and dust resistance * No-interference battery charger * Up to 10 hours runtime with CP 2.0Ah battery * Dimensions: 5.39 in. x 9.21 in. x 5.67 in. * Weighs approximately 3.68 lbs.
Not Yet Reviewed
$169.00
Clearance
Angel with Dove Tinsel Light Display
This striking angel radiates light from within, thanks to 100 UL-approved LED bulbs. The 60 in. tall indoor/outdoor figure is covered in spiral-patterned white and gold soft tinsel. Some assembly is required.
( 1 )
$179.99
$149.50
Clearance
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub
VE2DX Electronics CT17B-6BT V2 Bluetooth Icom Interface 5-Port TrueCIV Data Hub features CI-V over Bluetooth and a 5-Port hub that connects the interfaced transceiver's CI-V data stream to multiple accessories simultaneously. VE2DX Electronics Design Inc. TrueCIV creates a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. It delivers perfect CI-V data to many types of station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. The CT17B-6BT V2 Bluetooth Interface Data Hub is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its five TrueCIV ports. Alternatively, this interface can use CI-V over Bluetooth to pair with the computer, to isolate it from the RF side of any Icom station. Additionally, the CT17B-6BT V2 can interface to all ICOM CI-V 3.5mm Remote port radios from the legacy IC-735 to the newer IC-7300 and IC-9700 using a simple 3.5mm patch cable or CI-V over Bluetooth for the 705, ID52A and ID5100. Powered via the USB C port, VE2DX Electronics Icom Data Hubs make it easy to interface your computer and other devices to your Icom radio.
( 1 )
$124.99
$106.24
Clearance
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface
VE2DX Electronics IM1-4BTTUFFV2 ICOM TUFF METERS Digital Display and TrueCIV Interface is high-quality portable 2-Inch Meter Display and TrueCIV version 2 Data Hub for most Icom transceivers. This unique waterproof mini-screen device can show two bar graph meters or two needle meter displays, as selected with two front panel buttons, as well as other transceiver status indicators. This specially programmed VE2DX Electronics Design ICOM METER ESP32 device ingeniously samples Icom transceiver CI-V data to display available information in multiple formats, depending upon radio model. This exciting device also includes a custom VE2DX Electronics Design CT17-NANO v2 internal 2 port hub with TrueCIV, a new CI-V TTL standard that is unmatched for CI-V signal performance, signal integrity, maximum link length and RFI prevention. Multiple accessory items can be simultaneously served the interfaced transceiver's CI-V data stream via this internal 2-port hub. It supports a many types of Icom CI-V reading station devices including frequency based band decoders, smart antenna switch controllers, amplifiers, tuners, band pass filters and more. This is the perfect electronic remedy for the missing physical CI-V port on the IC-705. Instead, this Bluetooth device pairs with the IC-705 to send data to its two TrueCIV ports and single USB port. Powered via the USB C port, this unit interfaces to over 20 different ICOM radios using any one of these methods to connect: CI-V via Standard CI-V 3.5mm Remote port cable, Bluetooth CI-V or USBoIP using UDP. Another important feature of the VE2DX Electronics IM1-4BTTUFFV2 is the programmable alarm any time your SWR goes over 3:1. Finally, integrated magnets in the back and bottom of the IM1-4BTTUFFV2 simplifies installation on your portable equipment or in your shack. NOTE: VE2DX Electronics IM1 Meter devices are not transceiver screen adapters and do not display a bandscope. This meter display unit frees up the main display of the 7300, 9700 and 705 for bandscope operations.
( 1 )
$212.99
$181.04