Availability
Instant Rebate
ICOM IC-705 HF/50/144/430 MHz All Mode Portable Transceiver
Icom IC-705 HF/50/144/430 MHz All-Mode Portable Transceiver brings the advanced features of the IC-7300, IC-7610 and IC-9700 to a portable QRP package. It features SDR Direct Sampling technology for low noise and low distortion receiver performance and incredible voice and digital transmission capabilities. Along with the same color touch screen and high speed, high resolution of the real-time spectrum scope and waterfall display, the rich set of features in the IC-705 will easily place this radio as the "Best Ever" All-Band All-Mode Portable! Here are many of the advanced features of the Icom IC-705 Portable Transceiver: * "Base Station" performance in compact package that you can hold with one hand! * Dimensions (WHD): 7.9 x 3.1 x 3.3 in. (20.0 x 8.0 x 8.5 cm) * All-band All-mode Transceiver Capability: 160-6m+2m+70cm; SSB/CW/RTTY/AM/FM/DV (D-STAR) * Full D-STAR capabilities including DR mode and Terminal Mode/Access Point Mode * Send, receive and view images on the IC-705 with no application software required * "General Receive" coverage from MW through 148 MHz, 430-450 MHz * Receives AM and FM Broadcast Bands and Air Band * Output power is 10W on external 13.8V supply or 5W with included clip-in rear panel battery pack (BP-272 Li-ion); supports QRP and QRP operation down to 0.5 W * 4.3 in. color touchscreen display – same as used in the Icom IC-7300 and IC-9700 * High-speed, high-resolution, real-time spectrum scope and waterfall display * SDR Direct Sampling below 25 MHz and Down-conversion IF above 25 MHz * Built-In GPS tracking logger, repeater locator and finds nearby D-STAR repeaters * USB port (micro-B) for direct interface * Wireless LAN (802.11 b/g/n Wi-Fi) for remote operation * Bluetooth - supports smartphone linking, remote control and Bluetooth wireless headsets and headphones * microSD Card Slot (microSD card not included) * Includes HM-243 Speaker/Mic with multi-function buttons * Optional LC-192 Multibag Backpack for easy portable operations Note: A single BNC antenna connector functions for all bands
( 124 )
$1,399.95
On Sale
ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers
If you haven't yet heard of the ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers, then we can tell you that ICOM is at it again! IC-7100 transceivers introduce another amateur radio first. The radio control head features a large, multi-function, "touch screen" Dot-Matrix LCD display! This is an important feature because the controller's display not only provides information, but is also your control portal to the IC-7100's feature settings and menus. Breaking the basic rule that a radio faceplate must be vertically flat, the IC-7100's control head is sloped for the optimal viewing angle for the LCD display! The large touch screen also provides ample spacing for big fingers! ICOM even allowed plenty of room to have a large internal speaker, along with a jack for a CW key, a headphones/speaker jack, a microphone jack, and a control cable connection. IC-7100 base/mobile transceivers provide D-STAR (Digital Smart Technology for Amateur Radio) and DV (Digital Voice) mode and low speed data communication on the 2 meter and 70 centimeter bands. The D-STAR DV mode has loads of advantages over the analog FM mode: Digitally modulated clear voice; 950 bps of simultaneous data transfer; D-STAR individual calling using YOUR call sign, and access to the worldwide D-STAR repeater network linked via the Internet, just to name a few. The latest 32-bit floating point DSP (Digital Signal Processing) supports many digital processing features, such as a digital IF filter, twin PBT (Pass-Band Tuning), and manual notch filters. Of course, those high-grade digital processing features work on all ham bands from HF through the 70cm band. When considering a new all-band all-mode D-STAR equipped rig, keep these ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers from DX Engineering in mind! Just look at these features! * All-mode operation: USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) * Digital voice (DV) and data on VHF/UHF D-STAR * All bands 160 meters through 70cm (except 1.25m) * Separate control head with separation cable * Includes tactile tuning dial and direct frequency entry * 2-100W 160 through 6m, 2-50W 2m, 1-35W 70cm * Built-in SD Card Slot for voice storage and data cloning * Dual DSP chips deliver versatile digital processing performance * Built-in RTTY demodulator and decoder * Multi-function meter * SWR graphic display * DSP controller/RF speech compressor * Total of 505 memory channels * Voice recording and playback functions * ± 0.5ppm superior frequency stability * Optional RS-BA1 IP remote control software * ICOM CI-V interface capability Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand microphone * DC power cable * Electronic keyer plug * Spare fuses * Key plug * Accessory cable * Control head separation cable
( 88 )
$1,199.95
$1,099.00
Instant Rebate
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers provide continuous wide-range RX coverage from 30kHz through 174MHz, and from 400 through 470MHz including SWL, FM broadcast, and Air-band. TX band coverage includes HF 160 – 10M, with the addition of 6M, 2M, and 70cm. The Yaesu FTX-1 Field is perfect for portable field operation. This model features up to 10W of power output when used with an external 13.8VDC power supply. By attaching the SBR-52LI Li-ion to the rear of the Field Head, the FTX-1 provides 6W (5W for QRP) stand-alone operation on HF through V/UHF bands in all modes – SSB, CW, AM, FM and C4FM digital. 9-hour stand-alone operating time with 6W on HF bands (SSB), and 8-hour operating time with 6W on V/UHF bands (FM) are available (6-6-48 duty cycle). The FTX-1 Field Head can charge the included Li-ion battery automatically when connected to an External 13.8VDC power supply or use an optional third-party USB Type-C PD (Power Delivery) cable to recharge the battery (45W or greater/ 15V 2A).
( 12 )
$1,399.95
Instant Rebate
Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceivers
The exciting Yaesu FTDX10 Compact HF/50 MHz 100 W SDR Transceiver utilizes the Yaesu Hybrid SDR configuration - Narrow Band SDR and Direct Sampling SDR - like the FTDX101 series. The Narrow band SDR receiver emphasizes excellent receiver performance, while the Direct Sampling SDR provides a Digital Processing Real-Time Spectrum Scope. This stylish and well equipped model sets a new performance standard for the "affordable class" transceiver. Great for base and portable operations, the Yaesu FTDX10 is ready to order from DX Engineering. Click "More Details" for Features and Specifications Main Features of the Yaesu FTDX10 Compact HF/50 MHz 100W SDR Transceiver: - Narrow Band SDR with 3 types of roofing filters and phenomenal multi-signal receiving characteristics, as in the FTDX-101 series. The Down Conversion type receiver configuration with the first IF at 9 MHz has been adopted for the FTdx10. Excellent narrow bandwidth crystal roofing filters have the desired sharp "cliff edge" shape factor. Thanks to the Narrow Band SDR's latest circuit configuration including 500 Hz, 3 kHz and 12 kHz roofing filters and low-noise oscillator, the RMDR (Reciprocal Mixing Dynamic Range) reaches 116 dB or more, the close-in BDR (Blocking Dynamic Range) reaches 141 dB or more and 3rd IMDR (third-order Intermodulation Dynamic Range) reaches 109 dB or more in the 14 MHz band at 2 kHz separation. - 250MHz HRDDS (High Resolution Direct Digital Synthesizer) affords quiet and clear reception The local circuit of the new FTdx10 uses 250MHz HRDDS method same as the FTdx-101 series. Thanks to its characteristics that improve the C/N (carrier to noise) ratio and the careful selection of components in the design, the phase noise characteristic of the local signal achieves an excellent value of -145 dB or less in 14 MHz at 2 kHz separation. - 3DSS (3-Dimensional Spectrum Stream) on the 5-inch Full-Color TFT Display with Touch-Panel functionality The 5-inch Full-Color panel shows the 3DSS display. By touching the frequency display, the numeric keypad is displayed and the active band and frequency adjustment can be set by direct input. Frequency setting and adjustment can also be performed by turning the MAIN dial or touching the scope display. Similar to the FTdx-101 series, the MULTI display, RX operation status display, Center, FIX and Cursor modes are available. - Front Panel Designed for Superior Operating Efficiency - MPVD (Multi-Purpose VFO Outer Dial), is a large multi-purpose ring around the outside of the VFO dial that enables control of Clarifier, C/S (custom selection function) and recall of memory channels. - Remote Operation with optional LAN unit (SCU-LAN10) is possible with the optional SCU-LAN10 and SCU-LAN10 Network Remote Control Software. In addition to controlling the transceiver basic operations, the versatile scope displays enable sophisticated operations such as monitoring the band conditions on a large display at a location away from the ham shack by connection to a home LAN network. Additional features of the compact Yaesu FTDX10 include: - 15 separate band pass filters - Effective QRM rejection with the IF DSP (IF SHIFT/WIDTH, IF NOTCH DNF, DNR, CONTOUR) - High-quality and super stable final amplifier utilizing the new push-pull MOSFET RD70HUP2 - Aluminum Heat Sink with 80 mm low-noise axial flow cooling fan - High Speed Automatic Antenna Tuner with a large capacity 100-channel memory - RF & AF Transmit Monitor - Microphone Amplifier with Three-stage parametric Equalizer (SSB/ AM mode) - QMB (Quick Memory Bank) - Band Stack Function - Optional speaker – SP-30 designed for the new FTDX10 - Optional 300 Hz Plug-In Roofing Filter– XF-130CN
( 154 )
$1,399.95
On Sale
DX Engineering Handheld Transceiver Packages
DX Engineering Handheld Transceiver Packages include everything you need to get on the air quickly and start enjoying the 2 meters, 1.25 meters, or 70cm bands, whether you're a brand-new recently licensed HAM or a seasoned veteran. Get started with one of our hand-picked Alinco, ICOM, Kenwood or Yaesu portable handheld transceiver packages. These packages make it easy; we've removed the guesswork about which parts work with each radio. Each package starts with a quality handheld (HT) transceiver and paired them with quality upgrades and accessories such as antennas, batteries, chargers, headsets, or speaker-microphones. Certain packages even include RT Systems PC software to make programming your new radio easy! When reviewing these packages, click on "More Detail…" then the "Kit/Combo Contents" tab to see detailed descriptions of each included item. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 13 )
$1,172.80
$1,112.80
Instant Rebate
Yaesu FT-710 AESS HF/50 MHz Base/Portable Transceivers w/SP-40 Speaker
The magnificent new Yaesu FT-710 AESS HF/50 MHz SDR Transceivers represent the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack. The FT-710 AESS model includes the Acoustic Enhancement Speaker System (AESS) and features a large 4.3 inch, high-resolution TFT color multi-function touchscreen display which yields intuitive management of system settings and functions. Large control dials and the ergonomically designed layout of the front panel make the FT-710 easy to navigate. The real-time spectrum scope display adopts the FTDX series SDR 3D scope 3DSS (3 Dimensional Spectrum Stream)[RE1] to visualize changes in signal strengths within the bands.
( 75 )
$1,049.95
On Sale
DX Engineering IC-7300 Power Up Gear Combo
Take your Amateur Radio experience to the next level with the DX Engineering IC-7300 Power Up Gear Combo, featuring two powerhouse components designed for performance, reliability, and convenience.
( 1 )
$1,445.90
$1,134.90
Clearance
Hamplus Antenna Control Switching Devices
Hamplus Antenna Control Switching Devices include automatic band data controlled remote antenna switching systems including full web remote capability without a PC. Hamplus automates HF + 50 MHz switching for 8 to 16 antennas and from 2 to 8 radios, including devices to connect multiple directional controllers to as many as 8 different antenna rotators. Band-data and frequency reading, multi-function control consoles include support for all major brand transceivers with radio specific control cables. Hamplus also offers manual multi-port to multi-radio antenna switches and a four-stack antenna switching system. Years of Amateur Radio and professional experience shows in these components for emerging and elite DXers as well as established multi-radio contest stations. Hamplus products will improve the function and performance of your station. Click on each part number for specific descriptions, specifications, more information and links to compatible or required products.
( 11 )
$1,795.99
$1,346.99