Availability
Manufacturer Rebate
ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver
ICOM IC-9700 VHF/UHF/1.2 GHz All-Mode Direct Sampling Transceiver features advanced technology. Built with the VHF/UHF weak signal operator in mind, the IC-9700 has an RF direct sampling receiver for the 2m and 70cm bands, and a single down conversion IF from 311 – 371MHz for the 23cm band. This combination design provides a quiet receiver using Icom's DSP technology. This is an excellent all-mode transceiver with which to cover all operating facets of the 2 meter, 70 cm and 23 cm bands! Features for the ultra-advanced Icom IC-9700 include: * Direct-Sampling SDR design * RF Output of 100 Watts on 2m (144-148 MHz), 75 Watts on 70cm (430-450 MHz) and 10 Watts on 23 cm (1240-1300 MHz) * All modes including FM, SSB, AM, CW, RTTY, Digital, D-Star Digital Voice and Digital Data * Digital Data (DD) mode provides 128 kbps data communication * D-STAR Terminal and Access Point mode (RS-MS3A/W) * Dual D-STAR receive (decodes two voice streams simultaneously) * Main and Sub RX * Full Duplex operation/ Dual Watch (no V/V or U/U Capability) * Smooth satellite operations with normal/reverse tracking and 99 satellite channels * Supports 2 wave simultaneous reception (different bands/same or different mode) * High definition Real-Time 4.3 inch TFT display * Touchscreen interface (LCD touch-screen control) * Main or Sub-Band Scope (Center/Fix mode +/-500kHz Center Mode) * Audio Scope * CW full break-in * 0.5ppm frequency stability * Voice Recording/playback function (SD Memory Card) * Ethernet Port - Internal Server for Internet remote control with optional RS-BA1 software * USB audio and control connection * DR Memories: 2,500 * Antenna connectors: 2m SO-239, 70cm Type N, 1.2 GHz Type N More information at the More Details link below. Explore new horizons and space communications with the ICOM IC-9700 VHF/UHF/1.2 GHz Transceiver.
( 127 )
$2,099.95
Manufacturer Rebate
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers
Icom IC-7610-32 HF Plus 50 MHz All Mode Transceivers feature internal component updates to ensure the highest performance from these true dual-receive transceivers. RF Direct Sampling takes you to the next level with advanced dynamic range performance and true dual receivers in the Icom IC-7610-32 transceiver. Whether it is poor band conditions or battling to pick out a call in a large pile-up, faint signals have always been a challenge for DXers and Contesters around the world. The difference between putting the QSO in the log or having to try another time is the combination of your skill as an operator and the capability of your receiver. One key factor, measured as RMDR, Reciprocal Mixing Dynamic Range, is the receiver's ability to pick out a faint signal in the presence of stronger, adjacent signals. The IC-7610-32 introduces dual RF direct sampling receivers that achieve 110dB RMDR, rivaling the performance of top-of-the-line transceivers. This model transmits on the Amateur bands 160 through 6 meters with 100 watts output on all modes, except 25 watts on AM, with full dual receiver coverage from 30kHz to 60MHz.
( 4 )
$3,999.95
Instant Rebate
Kenwood TS-890S HF/50MHz Transceiver
Kenwood TS-890S HF/50MHz Transceiver: The most rewarding results often take place when faced with the harshest and most challenging conditions. HF enthusiasts know this all too well because of their love of HF. KENWOOD has the answer. Achieve results through certainty, not circumstance—delivered with impeccable receiver and audio performance. Introducing Kenwood's most advanced DSP transceiver, the TS-890S. Key features of the Kenwood TS-890S HF + 6M Transceiver: * 160-6 meters 100W All Modes * Full Down-Conversion Superheterodyne * Extra-low phase noise Local Oscillator * Built-in Roofing Filters, 15 kHz, 6 kHz, 2.7 kHz, and 500 Hz (270 Hz optional) * 7 in. TFT color display * High-speed Independent Band Scope * Animated Meter display toggles between TS-930 and TS-940 meter styles at a touch! * External display connector (DVI-I) * ANT output for external receiver * RF Attenuator (OFF/6/12/18dB) * Advanced DSP Noise Reduction function * Heavy-duty design delivers transmitter performance and endurance operation * Built-in high-speed automatic antenna tuner for rapid band changes * Encode and decode built-in for CW / PSK / RTTY * 120 channel memory * 3 PF keys (preferred function) * Screen capture * Remote operation via direct LAN connection (see KNS in owner's manual) * Multiple USB connections * KEYPAD jack (add up to 8 external PF keys) Place your order here for the Kenwood TS-890S.
( 33 )
$4,399.95
On Sale
DX Engineering Select Transceiver Packages
DX Engineering Select Transceiver Packages offer Amateur Radio enthusiasts the opportunity to purchase some of our best-selling equipment in conveniently packaged sets. These packages include a transceiver, antenna, and all necessary accessories to form a complete communications package. Certain packages also include a power supply, if required. Basically, once you get the antenna up, it's all you need to get on the air! Choose from packages that lend themselves to all-band / all-mode QRP portable use, 100-watt all-band / all-mode operations through 70cm, an SDR touchscreen 160-6 meter rig that is great for DX and contesting, a compact, ultra-portable, 100-watt all-band / all-mode compact station, or even a compact 50W 1.25 or 2 meter station. When you want a station that includes popular and easy to use components, consider one of these DX Engineering Select Station Packages! Look carefully at the photos for each package and be sure to click on the Kit/Combo Contents tab for more detailed information about every item contained in a package. * Important Note regarding DX Engineering Protection Plans and Kit Combo Contents Protection plans cannot be purchased for combination packages or on applicable devices after shipment. DX Engineering Combination Kits and Packages are designed to help you easily visualize and order the right items for your specific needs. However, we encourage you to contact our experienced Technical Sales Team for assistance. We can help adjust the kit contents, suggest substitutions based on stock availability, and offer DXE® Protection Plans for radios and devices when applicable. Contact us for Expert assistance and make informed purchasing decisions with our guidance.
( 7 )
$2,251.82
—
$2,826.76
$2,183.32
—
$2,815.76
Clearance
Open Box
RM ITALY BLA600 Solid State Amplifiers
RM ITALY BLA600 Solid State Amplifiers are wideband, compact, automatic linear amplifiers for 160 through 6 meters; 1.8 to 54 MHz. Low input drive requirements (20 to 25W on 80-10 meters, 30-40W for 500W on 160m and 6m) make these amplifiers THE perfect transceiver companion! RM ITALY BLA600 amplifiers are fully automatic 500W solid-state linear amplifiers suitable for seamless integration with all modern transceivers. They utilize the rugged NXP / Freescale MRF6VP5600H 50V power MOSFET for high power and high reliability. These amplifiers are capable of all modern modulation modes. BLA600 amplifiers are fully automatic, featuring instant RF frequency-reading for band changes and fast, reliable and silent PIN diode TX-RX switching, making them ideal for CW QSK operation (separately purchased transceiver to amplifier PTT keying cable is required.) BLA600 amps have three (3) antenna outputs that are easily configurable on a per-band basis as per the user's requirements. Their RF deck is supplied by a heavy-duty linear power supply, with 240 volt AC input* (115-120 or 230 VAC capable) and utilizes an efficient active bridge rectifier with very high-grade filter capacitors to provide the PA devices with a very low noise and robust 50V DC. The amplifier's RF deck has a large heat spreader and copper heat sink which provides a very efficient cooling system. There are separate fans for the RF deck and LPF board / power supply for high duty cycle operation. Internally, all modules are mounted in a very robust and well-screened enclosure. BLA600 amplifiers feature Dual MCU control and an extensive array of protection circuits that look after the amplifier with rapid reaction time. VSWR, I/P Power, I/P Frequency, Three Temperature sensors; Transistor / Heat sink and PSU, Drain voltage / Drain current and HV PIN supply are all continuously monitored. Some thumbnail details: * Employs Freescale MRFE6VP5600 Power FETs * Drive requirements: 20-25W for 500W on 80-10m; 30-40W for 500W on 160m and 6m * Input drive from 1W to maximum of 40W (1 to 25W w/reduced output) * Power Gain: Typical 14dB +/- 1dB (80-10m) * Solid 500W Output on all modes * Dual MCU Control * Fast PIN Diode RX-TX TX-RX switching enables full QSK operation * 2x16 LCD screen for Amplifier Status * Two Separate LED displays; one for power and one for antenna VSWR * Three antenna output connectors, user-configurable * Dual large-diameter MCU controlled multispeed fans for efficient cooling * 1,200W Linear Power Supply- Highly filtered and regulated * Weight: 21.5kg (47.4 lbs.) * Quiet, 240 VAC operation **Requires a user supplied NEMA 6-15P to IEC 320-C13 Cord. (Internally resettable for 230 or 120 VAC input on jumper board under rear access panel secured with T10 torx screws) * AC Input Fuse: 5 x 20mm F LBC 250V; Fast Blow, 240 VAC 5A (included); or 230 VAC 6A (optional) or 115-120 VAC 10A (optional, with NEMA 5-15P to IEC 320-C13 15A Cord.) WARNING: Amplifier is set from the factory for 240VAC operation. Do not use a low amperage PC power supply AC cord. An IEC C-13 14AWG 15A cord is required with NEMA 6-15P for 240VAC or NEMA 5-15P for 120VAC after internal jumpers and fuse have been changed. If your HF transceiver can be set for 20 to 40 watts output, then you will be sending 500 watts to the antenna on ALL bands 160 through 6 meters using this amplifier. The real beauty is that it all happens fully automatically! There is no tuning and no band switching! Give your signal a nice boost. Order the RM ITALY BLA600 Solid State Amplifier from DX Engineering!
( 14 )
$2,799.99
$2,519.99
Instant Rebate
Yaesu FTDX-101D HF/50MHz 100W Transceivers
The Yaesu FTDX-101D HF/50MHz 100W Transceiver brings new excitement and surprising advances in a particularly attractive package. Its unique hybrid narrow-band SDR configuration achieves unsurpassed critical dual receiver performance. The Direct Sampling SDR section provides astounding visual awareness of activity across the band as well as detail around the operating frequency on each receiver. The large, precision color touch-panel display also features gorgeous dual multi-function meters, dual frequency readouts and multi-functional touch controls, plus the exclusive 3DSS - Three Dimension Spectrum Stream waterfall and panadapter scope. The entire class-leading screen of the FTDX-101D may be displayed on a user supplied external monitor! Ergonomically arranged transceiver controls are centered about a large, tactile and weighted VFO. The Main knob is enhanced with the MPVD; Multi-Purpose VFO Outer Dial which controls the sub receiver VFO, clarifier, VC-Tune RF Preselector**, VFO fine tuning and a user defined Custom Selection function. A welcome feature, each function of the identical Main (A) and Sub (B) receivers have separate independent front panel controls; AF and RF gain, Shift, Width, Notch, Contour, Digital Noise Reduction and APF. Built for the serious contester, dual LED pushbuttons comprise the Active Band Indicator for each receiver, enabling effortless and rapid independent band changes. Adjustments of mode-specific settings and levels are displayed and accomplished quickly with the press-and-turn Multi-function selector. Every important control is strategically placed and readily available for maximum flexibility and ease of operation with this remarkable transceiver. Some of the impressive features and specs of the Yaesu FTDX-101D include: * High-Class 160 to 6 Meters 100 Watt Transceiver for all modes; SSB, AM, FM, CW, RTTY and Digital. * Superb and astonishing close-in dynamic range performance (120 dB RDR at 2 kHz spacing, 14 MHz, 500 Hz) * Hybrid SDR technology: Direct Sampling and NBW (narrow bandwidth) SDR * 9 MHz IF Roofing Filters with excellent Shape Factor * 400 MHz HRDDS (High Resolution Direct Digital Synthesizer) *Ultra-low phase noise 1st Local Oscillator * Completely independent dual receivers with general coverage receive *High-Q VC-Tune Front-End RF Preselector for maximum attenuation of -70 dB (Built-In Main RX, Option for Sub RX) * Yaesu renowned interference reduction system with 32 bit IF DSP and digital noise reduction (DNR) and DSP Auto Notch Many are aware that the iconic model number "101" comes from the legendary and best-selling FT-101 series produced in the 1970s. "The Legend Continues" as this HF transceiver carries the tradition of high quality known of the original 101 series. It is certain to satisfy the demands of a wide variety of Amateur Radio enthusiasts. Today, you may order the Yaesu FTDX-101D HF/50MHz 100W Transceiver from DX Engineering. Click 'More Detail' below to see additional information about the FTDX-101D HF/50MHz 100W Transceivers. The 200 watt version, Yaesu FTDX-101MP is displayed separately in the Base Transceivers area. **NOTE: The Yaesu FTDX-101D has the VC Tune Preselector installed in the MAIN receiver and 12 kHz, 3 kHz and 600 Hz roofing filters installed in the MAIN and SUB receivers. A second VC Tune Preselector is optional for the SUB receiver and four optional roofing filters, 300 Hz and 1.2 kHz for the MAIN and SUB, are available only by transceiver special order. Installation and calibration are done by Yaesu only with a $30 per item labor charge when options are special ordered with the transceiver. The standard model FTDX-101D shipped from stock cannot be internally upgraded by the user. Call DX Engineering to order your standard or custom built FTDX-101D.
( 53 )
$3,749.99
On Sale
ICOM IC-905 VHF/UHF/SHF All Mode Base/Portable Transceivers
ICOM IC-905 VHF/UHF/SHF All Mode +ATV Base/Portable Transceivers are 10 W QRP 144/430/1200/2400/5600 MHz All Mode +ATV Base/Portable Transceivers that hold the distinction of being the first in the industry to offer the capability of operating up to 10 GHz with the optional CX-10G Transverter (sold separately). The IC-905 offers all common operating modes - SSB and CW, AM/FM, and full D-Star functionality with DV (digital voice), DD (data) modes and analog FM ATV (analog Amateur Television) with included AV input/output ports. Output power for the IC-905 is 10W on 144/430/1200 MHz, 2W on 2400/5600 MHz and 0.5W with the optional 10 GHz module.
( 3 )
$3,199.95
$2,699.95
Clearance
Open Box
FlexRadio 8400M HF/6-Meter Signature Series SDR Transceivers
SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.
( 5 )
$3,649.00
$3,466.55
Clearance
Open Box
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers
FlexRadio 8400MATU HF/6-Meter Signature Series SDR Transceivers feature an integrated antenna tuner (ATU), and the latest direct sampling SDR technology, paired with a high-resolution display and ergonomic controls. The FLEX-8400M combines all the capabilities of the FLEX-8400 with a stunning 8-inch 1920×1200 IPS WUXGA touchscreen and intuitive controls, delivering high-performance SDR functionality in a traditional radio interface. Unmatched band awareness comes from the integrated display, while support for external monitors at 1900×1200 resolution enhances spectral visibility. The integrated automatic antenna tuner (ATU) is designed to match antennas with up to 3:1 SWR on 80–10 meters and up to 2.5:1 SWR on 160 and 6 meters. Designed with input from top contest and DX operators, the symmetrical and independent dual VFO controls are strategically placed to maximize productivity across all operating styles. Fully self-contained, the transceiver requires no PC, network, or steep learning curve—just plug in and operate. When connected to a PC, laptop, or Mac client, users can access up to two 7 MHz spectrum/waterfall displays and independent receivers, transforming how bands are viewed. Both receivers can operate simultaneously on any band and mode, with instant QSY between VFOs. Digital mode operation is streamlined—no sound cards, cables, or external boxes needed. FlexRadio's industry-leading SmartSDR™ software ensures compatibility across the entire FLEX-8000 Signature Series, enabling continuous software enhancements. With SmartLink™ technology, remote access is simple—just log in from any SmartSDR-compatible client, including an iPhone.
( 2 )
$3,999.00
$3,679.08