Availability
On Sale
ICOM IC-718 HF All Band Transceivers
ICOM IC-718 HF All Band Transceivers make communicating with the world easy! The superior performance of these HF base transceivers allows you to make contacts over long distances--even to the other side of the world! With excellent receiver sensitivity, a wide dynamic range, high signal-to-noise ratio, and full-duty operation, the ICOM IC-718s offer the latest RF and digital technology in a compact size. Clean, clear audio is easily heard from the front-facing speaker and the IC-718s feature a minimum of switches and controls to simplify operation. Plus, a soft-touch 10-key pad allows for the direct entry of an operating frequency. These are great HF starter transceivers but they will also thrill the accomplished ham, because the IC-718s are very simple to use. The IC-718 HF All Band transceivers will definitely be the most practical DSP rigs you will ever own! They provide many useful features that you want and need--and the price isn't bad, either! Some quick specs: * 160 through 10 meter operation (60 meter channels not available) * Continuously adjustable RF power output -- 100 watts maximum to 2 watts minimum (SSB and CW modes) -- 40 watts to 2 watts (AM mode) * 30 kHz through 30 MHz general coverage receiver * 1 Hz frequency resolution * 101 memory-scan channels Other great features include: * Includes DSP noise reduction and auto notch (UT-106 module) * RF gain control * RF attenuator and preamplifier * Adjustable level noise blanker * IF shift control * Receiver Incremental Tuning (RIT) * Band stacking register * Tuning rate auto step-up function * Digital S/RF meter * VOX operation * Adjustable microphone audio compressor * Electronic CW keyer Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand-held microphone * DC power cable and spare fuses These little transceivers are great for portable use or as Field Day equipment. They also make great back-up transceivers for well-equipped ham shacks. New Ham or not, one of these IC-718s is a nice addition to any station. Order ICOM IC-718 HF All Band Transceivers from DX Engineering and enjoy some easy QSOs.
( 47 )
$1,099.95
$899.95
On Sale
Instant Rebate
RigExpert Antenna Analyzers
RigExpert Antenna Analyzers are powerful antenna analyzers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines. Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more. Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot SWR, R, X and Smith charts, etc.); make RigExpert Analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10, 11 and Mac, with software download*. The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. ZOOM models allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with Antscope for Android or Antscope2 software to PC or MAC. *(download from the manufacturer https://rigexpert.com/products/software/). Many models have Bluetooth for direct file transfer for galvanic isolation without a USB cable, which provides the most accurate measurements. RigExpert Antenna Analyzers are available in several models with greater frequency range of operational features. Some have SO-239 UHF female connector, except for most models that operate at 230 MHz and above that have a Type N female connector. An array of options are available to cover almost any need for the professional and the Amateur. The following tasks are easily accomplished by using RigExpert Antenna Analyzers: * Rapid check-out of an antenna * Tuning an antenna to resonance * Antenna SWR and impedance measurement and comparison before and after a specific event (rain, hurricane, winter, etc.) * Making coaxial lines or measuring their parameters * Cable testing and fault location * Measuring capacitance or inductance of reactive loads *Send data to laptop for larger graphical display and further analysis. Note: For additional product information, please look at the files under the "Documentation" tab. When you need a versatile antenna analyzer for Amateur Radio or professional use, you'll find that one of these RigExpert Antenna Analyzers, from DX Engineering, will be well suited to the task!
( 513 )
$999.95
Firman Inverter Portable Generators
Firman offers inverter portable generators in a variety of sizes and fuel tank capacities. Quiet and easy to use, they're built for fun, safe for all sensitive electronics and ideal for camping, tailgating and recreational use power supply. The generators are made to endure every condition, from cold winter nights to hot summer days and everything in-between. These air cooled 4-stroke gasoline engine units are available in different AC outputs and wattage, outlet type, and recoil, electric, or remote start options. They feature a built-in inverter, and larger models include caster wheels. (Gasoline/propane dual fuel inverter is also available.)
Not Yet Reviewed
$996.99
Clearance
Open Box
Palstar BT1500A 1500 Watt Double L Balanced Antenna Tuners
Palstar BT1500A 1500 Watt Double L Balanced Antenna Tuners are the only 1,500 watt, double-L network antenna tuners on the market today. BT1500A tuners feature two tandem mounted, precision ceramic roller inductors for a truly balanced tuner. A dual section capacitor provides the correct amount of capacitance for both low-band and high-band operation and is relay-switchable between the input and output side to provide the maximum possible range of impedance matching. So, why buy a balanced tuner? Joel Hallas described the problem many antenna tuners experience in his September 2004 QST article on balanced tuners. He wrote, "Unfortunately, the typical random sized center-fed antenna with random length ladder line feed has an impedance at the feed point that varies dramatically with frequency. The result can be heating and loss (and occasional damage) at the balun ... the classic solution has been the use of an inherently balanced tuner." In his QST article, Joel Hallas was reviewing Palstar's former model AT1500BAL as a high-power solution for amateur operators looking for a balanced tuner. Since that review, the engineers at Palstar have reengineered their AT1500BAL tuner inside and out and reintroduced it as their BT1500A. Palstar BT1500A 1500 Watt Double L Balanced Antenna Tuners feature two precision ceramic-body roller inductors mounted in tandem. The massive dual-section capacitor can be switched, with a front panel controlled relay, from the input side to the output side of the tuning network to provide maximum flexibility in tuning range. Another front panel controlled relay switches the two sections of the capacitor for high and low-band coverage. Plus, as a final touch to the BT1500A, Palstar's engineers added the peak and peak hold dual cross-needle metering found in our popular PM2000A wattmeter. Here are the specifications on these great double balanced antenna tuners; model BT1500A: -- Power rating: 1500 watts PEP -- Relay switched Hi/Low-Z impedance range -- Relay switched Hi/Low-C variable capacitor -- Total inductance of 44uH for greater impedance range on 160m -- Matching range: 160m - 20m (2500+/-j2500), 10m - 15m (1000+/-j1000) -- Two tandem-mounted ceramic body roller inductors - silver plated wheel and wheel shaft -- One turns counter and one crank handle drive both inductors -- Low minimum capacitance, dual-section variable capacitor (960pF/65pF @ 4.5kV) with Vernier drive for smooth accurate tuning -- Ferrite 1:1 input balun, required on double balanced tuners -- Peak and peak hold dual cross-needle metering (1-2 sec hold) with backlighting -- Cabinet metalwork is heavy 11 gauge (0.090 in. thick) Iridite®-coated aluminum; powder coated front panel and top cover Note: For additional information, please look at the files under the "Documentation" tab. Please remember that Palstar BT1500A 1500 Watt Double L Balanced Antenna Tuners are highly-specialized tuners, designed to do only one thing--tune balanced-line feed antennas--and do it well. Order yours from DX Engineering!
( 6 )
$1,095.99
$986.39
On Sale
ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers
If you haven't yet heard of the ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers, then we can tell you that ICOM is at it again! IC-7100 transceivers introduce another amateur radio first. The radio control head features a large, multi-function, "touch screen" Dot-Matrix LCD display! This is an important feature because the controller's display not only provides information, but is also your control portal to the IC-7100's feature settings and menus. Breaking the basic rule that a radio faceplate must be vertically flat, the IC-7100's control head is sloped for the optimal viewing angle for the LCD display! The large touch screen also provides ample spacing for big fingers! ICOM even allowed plenty of room to have a large internal speaker, along with a jack for a CW key, a headphones/speaker jack, a microphone jack, and a control cable connection. IC-7100 base/mobile transceivers provide D-STAR (Digital Smart Technology for Amateur Radio) and DV (Digital Voice) mode and low speed data communication on the 2 meter and 70 centimeter bands. The D-STAR DV mode has loads of advantages over the analog FM mode: Digitally modulated clear voice; 950 bps of simultaneous data transfer; D-STAR individual calling using YOUR call sign, and access to the worldwide D-STAR repeater network linked via the Internet, just to name a few. The latest 32-bit floating point DSP (Digital Signal Processing) supports many digital processing features, such as a digital IF filter, twin PBT (Pass-Band Tuning), and manual notch filters. Of course, those high-grade digital processing features work on all ham bands from HF through the 70cm band. When considering a new all-band all-mode D-STAR equipped rig, keep these ICOM IC-7100 HF/VHF/UHF Base/Mobile Transceivers from DX Engineering in mind! Just look at these features! * All-mode operation: USB, LSB, CW, RTTY, AM, FM, WFM (Rx only) * Digital voice (DV) and data on VHF/UHF D-STAR * All bands 160 meters through 70cm (except 1.25m) * Separate control head with separation cable * Includes tactile tuning dial and direct frequency entry * 2-100W 160 through 6m, 2-50W 2m, 1-35W 70cm * Built-in SD Card Slot for voice storage and data cloning * Dual DSP chips deliver versatile digital processing performance * Built-in RTTY demodulator and decoder * Multi-function meter * SWR graphic display * DSP controller/RF speech compressor * Total of 505 memory channels * Voice recording and playback functions * ± 0.5ppm superior frequency stability * Optional RS-BA1 IP remote control software * ICOM CI-V interface capability Note: For additional information, please look at the files under the "Documentation" tab. Supplied accessories include: * Hand microphone * DC power cable * Electronic keyer plug * Spare fuses * Key plug * Accessory cable * Control head separation cable
( 95 )
$1,199.95
$838.95
Instant Rebate
Yaesu FT-710-FIELD HF/50 MHz Base/Portable Transceivers
The new Yaesu FT-710-FIELD HF/50 MHz SDR Transceivers are now available in a convenient field package that includes a handy carrying belt , but without the SP-40 speaker. The SP-40 External Speaker is available as an optional accessory if you still want to enjoy the benefit of the Acoustic Enhanced Speaker System (AESS) out in the field. FT-710-FIELD represents the latest in SDR transceiver technology from Yaesu. This transceiver covers the HF Amateur Radio bands, 160 through 6 meters in a compact design that is perfect for portable operations, but equally suitable as a base station in the shack.
( 50 )
$999.95
Instant Rebate
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers
Yaesu FTX-1 Series HF/50/144/430MHz SDR All Mode Base/Portable Transceivers provide continuous wide-range RX coverage from 30kHz through 174MHz, and from 400 through 470MHz including SWL, FM broadcast, and Air-band. TX band coverage includes HF 160 – 10M, with the addition of 6M, 2M, and 70cm. The Yaesu FTX-1 Field is perfect for portable field operation. This model features up to 10W of power output when used with an external 13.8VDC power supply. By attaching the SBR-52LI Li-ion to the rear of the Field Head, the FTX-1 provides 6W (5W for QRP) stand-alone operation on HF through V/UHF bands in all modes – SSB, CW, AM, FM and C4FM digital. 9-hour stand-alone operating time with 6W on HF bands (SSB), and 8-hour operating time with 6W on V/UHF bands (FM) are available (6-6-48 duty cycle). The FTX-1 Field Head can charge the included Li-ion battery automatically when connected to an External 13.8VDC power supply or use an optional third-party USB Type-C PD (Power Delivery) cable to recharge the battery (45W or greater/ 15V 2A).
( 19 )
$999.95
On Sale
DX Engineering Emergency Readiness Packages
DX Engineering Emergency Readiness Packages – the perfect solution for reliable communication in times of crisis. These expertly designed kits take the guesswork out of emergency preparedness, providing you with everything you need to stay connected when traditional communication methods fail. Whether you're facing a natural disaster, power outage, or system failure, GMRS radios offer a dependable means of communication, using pre-defined channels for simplicity and ease of use. No need to fiddle with complex frequencies – just turn it on and go!
Not Yet Reviewed
$843.66
$763.66
Clearance
Open Box
ELAD FDM-S3 SDR Receivers
ELAD FDM-S3 SDR Receivers are outstanding Software Defined Radios with impressive performance features. The Italian manufacturer, ELAD, has pushed the boundaries of modern SDR design with this model. For instance, the FDM-S3 offers an incredible 24 MHz bandwidth that can be scanned simultaneously, allowing up to four receivers to operate at the same time—a feature typically reserved for much more expensive receivers. The FDM-S3 functions as a direct sampling SDR with a variable sampling rate of up to 122.8 MHz. It covers a reception range from 9 kHz to 108 MHz, with an optional downconverter available for even higher frequencies. One of the unique aspects of the FDM-S3 is its variable sampling rate, which ranges from 98 to 122 MHz depending on the band. This flexibility allows for more favorable divider ratios for down-sampling, enhancing sensitivity and dynamic range.
( 1 )
$1,015.99
$914.39
Clearance
Open Box
Ciro Mazzoni Loop Antenna Replacement Parts
Ciro Mazzoni Loop Antenna Replacement Parts are stocked for those who need to update or reinstall their Loop Antenna by I3VHF. Parts are all original; exactly the same supplied with each model, MIDI, BABY and STEALTH models, including Actuator motors and Isolator Arms. The updated, current model ATU 2.0 replacement (MZZ-COM1001) is the same as supplied with all three new antennas. So are the Universal AC Power Supply (MZZ-COM1002) and the USB Keyboard (MZZ-COM1003). The Stainless Steel Mast Clamp and hardware (MZZ-COM1005) fit the MIDI or the BABY Loops. The MZZ-BLA1010 aluminum adapter plate is supplied with BABY Loop Tripods, available here as a replacement. Order Loop Antenna by I3VHF Replacement Parts here at DX Engineering.
( 7 )
$799.99
$759.99