Selected Filters


Availability


Bulk 50 Ohm Coaxial Cable for Amateur Radio & RF Applications

Bulk coaxial cable is the foundation of a reliable amateur radio station. DX Engineering offers professional-grade 50-ohm coaxial cable by the foot, including RG213/U,...

Bulk coaxial cable is the foundation of a reliable amateur radio station. DX Engineering offers professional-grade 50-ohm coaxial cable by the foot, including RG213/U, RG8X, RG8U, RG400, and DXE-400MAX. Build custom-length feed lines with the connector options, routing, and installation method your station requires.

Find the right feed line for your application with our DX Engineering Coaxial Cable Reference Chart, which provides a convenient side-by-side comparison of available coaxial cable options.

Bulk coaxial cable is the foundation of a reliable amateur radio station. DX Engineering offers professional-grade 50-ohm coaxial cable by the foot, including RG213/U, RG8X, RG8U, RG400, and DXE-400MAX. Build custom-length feed lines with the connector options, routing, and installation method your station requires.

Find the right feed line for your application with our DX Engineering Coaxial Cable Reference Chart, which provides a convenient side-by-side comparison of available coaxial cable options.

Part Groups

Results 1 - 13 of 13

Times Microwave Systems® Bulk Coaxial Cables

Times Microwave Systems Bulk Coaxial Cables are recognized as superior RF cable products. The standard Times Microwave LMR® is a UV-resistant polyethylene jacketed cable designed for 20-year service in outdoor use. Depending upon size, LMR® cable has a solid copper or copper clad solid aluminum center conductor. Their bending and handling characteristics are significantly better than air-dielectric and corrugated hard line cables. LMR-DB® cable has a waterproofing compound to prevent moisture intrusion after a minor abrasion. Times Microwave Systems EZ Series and TC Series connectors are suitable for use on standard LMR® and LMR-DB® cables. Times Microwave Systems LMR® UltraFlex (UF) cables have a stranded bare copper center and a rubber jacket (black thermoplastic elastomer) designed for repeated bending. Times Microwave TC Series crimp connectors are designed for use on LMR® UltraFlex cables. LMR®'s RF shielding is typically 50 dB greater than standard coax. The copper shield and multi-ply bonded foil outer conductor is rated conservatively at greater than 90 dB. That's better than 180 dB isolation between two adjacent cables. A wide variety of connectors are available for LMR cables, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimped outer attachment using standard hex-crimp methods. Times Microwave Systems is a premier supplier of coaxial cable products worldwide. Only Times offers a range of products specifically developed to perform as needed in the most diverse range of environments. Times Microwave Systems has over 60 years of experience in building the highest-quality cables. Order LMR® coaxial cables from DX Engineering and put Times Microwave Systems Bulk Coaxial Cables to work for you! LMR® is a registered trademark of Times Microwave Systems.

4.88 out of 5 stars ( 106 )

$0.90

—

$1,229.99

DX Engineering RG-8X 50-ohm Bulk Coaxial Cable

DX Engineering RG-8X 50-ohm Bulk Coaxial Cable is a very flexible low-loss, gas injected foam dielectric feedline, with a braided shield and non-contaminating Type II-A PVC jacket, suitable for short run direct bury applications. Our RG-8X is intended for moderate-power HF stations or mobile applications where short runs and flexibility are key factors. Slightly larger than RG-58 cable, DX Engineering RG-8X offers better handling characteristics, very good shielding, and lower loss. DXE-8X uses standard PL-259 or Type-N connectors with UG-176S reducing adapters (connectors and reducers sold separately). Note: For additional product information, please look at the files under the "Documentation" tab.

4.92 out of 5 stars ( 187 )

$0.65

—

$599.99

DX Engineering RG-213/U 50-ohm Bulk Coaxial Cable

DX Engineering RG-213/U is a low-loss, 50-ohm, standard-spec Coaxial Cable with a non-contaminating Type II PVC jacket. This is unterminated bulk cable that is sold by the foot. See Coaxial Cable Assemblies for coax with connectors. Specially manufactured for DX Engineering, RG-213/U feedline is perfect for outdoor use due to its excellent UV resistance and durability in direct-bury applications. Specially suited for high-power amateur stations, RG-213/U provides a lower loss solution for long cable runs at any power level. Featuring a solid polyethylene dielectric, this is the coax that withstands constant movement and flexing on tower mounted rotatable and directional beam antennas. DXE-213U is recommended by contest station owner K3LR for installation at tower top as "rotator loop" coax for HF and VHF. DX Engineering RG-213/U is easily terminated with standard solder or crimp style PL-259 and N connectors designed for RG-8 sized, 0.405 in. cables. DX Engineering Next Generation hybrid PL259s with crimp shield, solder center attachment are also a great choice for DXE-213U coax cable. Note: For additional product information, please look at the files under the "Documentation" tab.

4.95 out of 5 stars ( 110 )

$1.60

—

$1,299.99

DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable

DX Engineering 400MAX is premium, low-loss, 50-ohm bulk cable with a special Type III-A, UV-resistant polyethylene jacket that is waterproof; ideal for outdoor applications, particularly direct-bury. With its larger 10 AWG stranded copper center conductor, 400MAX is specially suited for high-power amateur stations, providing a lower loss solution for long cable runs at any legal power level. The high-quality construction continues with a gas-injected foam polyethylene dielectric, followed by the highest level of shielding with bonded aluminum tape covered by a tinned copper shield braid. Coaxial cables with foil-braid dual shielding or foam dielectric are optimized for stationary simplex antenna applications across HF, VHF and UHF. DXE-400MAX is not recommended for use in in a VHF/UHF duplex repeater applications or for a beam antenna rotator loop. DX Engineering 400MAX Low-Loss 50-ohm Bulk Coaxial Cable accepts standard PL-259 or N connectors. Note: For additional product information, please look at the files under the "Documentation" tab.

4.95 out of 5 stars ( 92 )

$1.54

—

$1,539.99

RG-400 High-Isolation Double-Shield 50-ohm Coaxial Cable

RG-400 is a high-isolation 50-ohm coaxial cable that is ideal for critical, very low signal level, low noise applications as well as high power handling for RF equipment interconnections. Proper terminations on RG-400 cable assemblies provides extremely low crosstalk and very low noise ingress with a double-braid shielding effectiveness that results in over 100dB of isolation across HF frequencies. This cable is Mil-Spec equivalent to M17/128-RG400. RG-400 is compatible with N-type and PL-259 solder type connectors with UG-175S reducers for RG-58 size cables. NOTE: RG-400 has an OD of 0.195 inch and is NOT the same as DXE-400MAX which is 0.405 inch OD. RG-400 Specs: Center Conductor: Silver Plated Copper – 20AWG Center Conductor Diameter: 0.0384 in. (19 strands of 0.008 in.) Dielectric: PTFE (Polytetrafluoroethylene) Dielectric Diameter: 0.116 in. Shield Construction: Two Layers of Braided Silver Plated Copper Shield Outer Diameter: 0.156 in. Jacket: FEP (Fluorinated ethylene propylene) Cable Overall Diameter: 0.195 in. Minimum Bend Radius: 1.0 in. Weight (lbs. per 1,000 ft.): 50.0 Capacitance: 29.4 pF/ft. Maximum Voltage: 1,900 V Velocity factor (VF), nominal: 69.5% (0.695) Click "More Detail" for more information

5.0 out of 5 stars ( 11 )

$7.49

DX Engineering RG-8/U 50-ohm Bulk Coaxial Cable

DX Engineering RG-8/U Bulk Coaxial Cable is a new age low-loss 50-ohm feedline with gas injected foam polyethylene dielectric and black vinyl jacket. This is not your grandfather's RG-8. Highly flexible and specially well suited in low and high power Amateur stations, our new DXE-8U provides a lower loss solution, for nearly any length cable run, at any legal power level. High reliability, flexibility and low loss are key points when considering this cable. DX Engineering RG-8/U accepts standard PL-259 and N connectors (sold separately). Note: For additional product information, please look at the files under the "Documentation" tab.

5.0 out of 5 stars ( 48 )

$1.39

—

$1,149.99

DX Engineering RG-8X High Visibility Orange 50-ohm Bulk Coaxial Cable

DX Engineering RG-8X High Visibility Orange 50-ohm Bulk Coaxial Cable is one of the most flexible high-quality low-loss coaxial cables on the market. DXE-8XV features a stranded copper 16 AWG center conductor, gas injected foam dielectric, with a braided copper shield and a non-contaminating, highly water-resistant Type II-A PVC direct-bury orange colored jacket. This cable is intended for most low, medium and medium-high power HF operations in base, mobile and especially in portable applications where short runs, flexibility and visibility are key factors. NOTE: DXE-8XV Orange will fade with continuous sunlight UV exposure. Color delivered can vary. DX Engineering DXE-8XV Orange Jacket Coax has the same industry standard specifications as DXE-8X black jacket coax. DXE-8X is the coax cable most often used for jumpers in the shack and for medium length cables for portable operations, offering significantly better handling characteristics than larger cables, excellent shielding, and lower loss than slightly smaller RG-58. DXE-8XV orange coax is a 0.242 in. diameter cable that can be terminated with standard PL-259 or Type-N connectors and UG-176S reducing adapters (connectors and reducers sold separately). DXE-8XV is also easily terminated with crimp connectors including DX Engineering Next Generation Crimp-Solder 8X PL-259 Connectors. Connectors and Tools are displayed in Suggested Parts. DXE-8XV with DX Engineering Next Gen PL-259 connectors is available in our top-quality Coaxial Cable Assemblies. DXE-8XV is the part number sold by the foot, or it is available in 1,000 ft. spools as DXE-8XV-1000. DXE-8XV Specs: Attenuation/100 ft. – Power Rating 0.65 dB @ 5 MHz – 3.0 kW 1.0 dB @ 10 MHz – 2.2 kW 1.5 dB @ 30 MHz – 1.2 kW For additional product information, please check the files in the "Documentation" section.

5.0 out of 5 stars ( 17 )

$0.69

—

$685.99

DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable

DX Engineering RG-58A/U 52-ohm Bulk Coaxial Cable is a highly flexible, 52 ohm feedline with a black PVC jacket, which is ideal for all indoor and some outdoor applications where UV exposure is not an issue. Specially suited for low to medium-power amateur stations, RG-58A/U also provides an ultra-flexible cable for coaxial jumpers. DX Engineering RG-58A/U features a low-density polyethylene dielectric and uses PL-259 or 2-piece N connectors. Both connector types must be used with reducing adapters that fit RG-58 cable.

4.94 out of 5 stars ( 17 )

$0.55

DX Engineering RG-214 50-ohm Double Shielded Coaxial Cable

DX Engineering RG-214 is a high-isolation, double shielded low-loss 50-ohm coaxial cable. Covered with a black, non-contaminating Type-II-A PVC this cable jacket offers a high level of UV protection and durability for all outdoor uses and direct-bury applications. Specially manufactured for DX Engineering, our RG-214 is a rugged, flexible MIL-SPEC coax with a 12-gauge stranded silver plated copper center conductor, solid polyethylene dielectric and TWO layers of silver plated braided copper shields to provide exceptional RF isolation and superior power handling performance. This coax is perfect for use where many cables are bundled together and higher RF isolation is critical. Use DXE-214 in bundles of multiple monoband and multi-band directional antenna feedlines on towers, especially for rotator loops. This cable excels at maintaining RF isolation in the shack or in the equipment room of stations that have many antenna feedlines. DXE-214 is specifically recommended for use in VHF/UHF duplex repeater applications. IMPORTANT NOTE: Due to the double braided shield, the jacket outside diameter of DXE-214 is 0.425 in. Therefore, RG-214 coax cable CANNOT be stripped with the specialized prep tools made for standard 0.405 in. OD, RG-8U, 400MAX and RG-213 size coaxial cables. DX Engineering offers only solder type PL259 and N connectors that fit onto DXE-214 cable. No crimp type connectors are available. Use DXE-15035 Coax Cable Strippers for DXE-214 and these compatible connectors installed with soldered shield and soldered center pin: PL-259/UHF Male – DXE-PL-259-6 AML-83-1SP-6 Type N – DXE-1001-S-4 DX Engineering RG-214 50-ohm Double Shielded Coaxial Cable is sold in bulk, cut to length and on 500 ft. and 1,000 ft. spools. We also stock pre-made assemblies with PL-259 and type N connectors; search for 214 assemblies.

5.0 out of 5 stars ( 1 )

$9.49

DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable

DX Engineering RG-6U 75-ohm Flooded Quad Shield Coaxial Cable is our top-of-the-line, direct-bury RG-6. It has low RF signal loss and provides greater protection against electromagnetic interference. Available cut-to-length by-the-foot or in 1,000 ft. spools, this is the best ultra-high quality RG-6/U self-healing quad-shield cable solution. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. DXE-RG-6UFQ cable is ideal for many receiving applications including active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution and satellite radio installations such as Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up through microwave frequencies of satellite radio systems! Our RG-6 flooded quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding. The waterproof UV protected black jacket is made with a tough and flexible polyethylene (PE). This cable is infused with a flooding compound that provides a permanent barrier to moisture and is self-healing to minor cuts. The nominal impedance of DXE-RG-6UFQ cable is 75 ohms with a nominal Velocity Factor of 82% (VF = 0.82). The minimum bend radius is 2.500 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? DX Engineering RG-6U 75-ohm Flooded Quad-Shield Coaxial Cable is absolutely the best RG-6 quad-shield cable available and it is RoHS compliant! Check these super low attenuation figures! 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? If so, then order the new benchmark in RG-6 cable: DX Engineering RG-6U 75-ohm Flooded Quad Shield Coax. Your efforts will be rewarded with the results that you expect, using the best cable from DX Engineering.

4.78 out of 5 stars ( 9 )

$0.37

—

$255.99

DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable

DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable is a low-loss, high-power 75-ohm feedline with a premium-grade, waterproof polyethylene jacket. Manufactured specially for DX Engineering, the 11U jacket is UV-resistant and, due to its durability, works great in direct-bury applications. This RG-11/U cable is ideal for impedance-matching phasing cables for arrays from HF Four Squares to VHF applications. The 82 percent velocity of propagation provides the longer cables necessary to reach from the center-of -the-array mounted Four Square controller to each element at the corners of the array. DX Engineering 11U cable is easily terminated with any of the solder type and crimp type PL-259 (UHF male) and N connectors which are designed for installation on 0.405 in. OD, RG-8U sized cables. You are in the market for a 75-ohm cable that provides high reliability and long life. Choose DX Engineering RG-11/U 75-ohm Bulk Coaxial Cable.

4.75 out of 5 stars ( 8 )

$1.49

DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable

DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable is our regular RG-6U with a Type II PVC jacket, low loss and greater protection against electromagnetic interference. Available cut to length or in 1,000 ft. spools; this is a high-quality standard RG-6U quad-shield cable. This cable may be terminated in the field with black EX6XL Type-F Universal Compression Connectors, also available from DX Engineering. (Please Note: Also available is our waterproof direct-bury PE jacket RG-6 version: search 75-ohm Flooded Quad Shield, DXE-RG6UFQ-CTL and DXE-RG6UFQ-1000.) DXE-RG-6UQ cable is ideal for many applications, such as active or passive HF Amateur Radio and SWL receive antenna arrays and systems, LW and MW magnetic loop antennas, Beverage antennas, over-the-air TV, AM and FM broadcast reception, CATV systems and video distribution as well as satellite radio installations like Sirius/XM. In fact, the low-loss characteristic of our RG-6 cable is excellent for digital audio up to the microwave frequencies that Satellite Radio systems employ! Our RG-6 quad shield cable has gas-injected polyethylene foam dielectric for the lowest loss and maximum moisture resistance. With an 18 AWG copper-clad steel center conductor it is extremely strong and durable. Two foil shields plus two high-density aluminum braids provide ultimate four-layer RF shielding and the UV protected black jacket is made with a tough, but very flexible, PVC. The nominal impedance of DXE-RG-6UQ cable is 75 ohms, and it has a nominal Velocity Factor of 82%. The minimum bend radius of this cable is 2.50 in. Beware of cheaply made cable with unknown impedance and loss characteristics. If some other cable is substantially less expensive, that should tell you something, right? Please Note: Also available is our direct-bury PE jacket RG-6 version: search 75-ohm Flooded Quad Shield, DXE-RG6UFQ and DXE-RG6UFQ-1000. This DX Engineering RG-6UQ 75-ohm Standard Quad-Shield Coaxial Cable is a Type-II PVC jacket RG-6 quad-shield cable that is RoHS compliant. Check out these low attenuation figures: 5 MHz: 0.6 dB/100 ft. 30 MHz: 1.1 dB/100 ft. 55 MHz: 1.6 dB/100 ft. Losses at 1.8 MHz are virtually insignificant over several hundreds of feet of this coaxial cable. It can be used for low band receive antennas and arrays without the complications of using a preamp at the antenna. Are you installing or upgrading a Low Band receiving antenna or a CATV or satellite video distribution system that uses RG-6/U Quad cable? Order DX Engineering RG-6U 75-ohm Standard Quad-Shield Coaxial Cable.

5.0 out of 5 stars ( 1 )

$0.39

—

$219.99

DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Cable

DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Cable has an easy-to-see orange jacket. This extremely thin 0.11 inch diameter super flexible cable is a smart choice for SOTA, POTA and other quick-deploy portable antennas. Mini coax in orange is easy to identify on the test bench and behind the radio for QRP and receive only connections. How is this a good choice? CLICK the cable to see the product page. The efficiency of this amazingly thin coaxial cable is unexpectedly good, adding slightly more attenuation for a given length as compared to larger, heavier coax on HF. For typical applications with portable antennas and equipment interconnections, the losses are inconsequential across the HF bands with the cable lengths offered. A typical portable antenna used with a 25 ft. cable has 0.73dB loss on 14 MHz (20M band) which represents only 15% loss. An extreme example is with 50 foot of DXE-174V cable on a 10 meter (28 MHz) that has just over 2dB attenuation, and a power loss of 38%, which results in an imperceptible difference at the receiving end of a radio contact. Losses are insignificant with DXE-174V coax on HF bands, especially with jumpers. Use DX Engineering RG-174 50-ohm Hi-Viz Orange Mini Coaxial Cable for HF POTA and SOTA antennas that are easier to wrap up, carry, install and pack up. NOTE: This coaxial cable is NOT intended to be used for long lengths on VHF or UHF antennas; frequencies above 50 MHz will have significant loss.

Not Yet Reviewed

$0.89

  • 1
  • Page 1 of 1